Allows to specify mount options for RootImage.
In case of multi-partition images, the partition number can be prefixed
followed by colon. Eg:
RootImageOptions=1:ro,dev 2:nosuid nodev
In absence of a partition number, 0 is assumed.
https://tools.ietf.org/html/draft-knodel-terminology-02https://lwn.net/Articles/823224/
This gets rid of most but not occasions of these loaded terms:
1. scsi_id and friends are something that is supposed to be removed from
our tree (see #7594)
2. The test suite defines an API used by the ubuntu CI. We can remove
this too later, but this needs to be done in sync with the ubuntu CI.
3. In some cases the terms are part of APIs we call or where we expose
concepts the kernel names the way it names them. (In particular all
remaining uses of the word "slave" in our codebase are like this,
it's used by the POSIX PTY layer, by the network subsystem, the mount
API and the block device subsystem). Getting rid of the term in these
contexts would mean doing some major fixes of the kernel ABI first.
Regarding the replacements: when whitelist/blacklist is used as noun we
replace with with allow list/deny list, and when used as verb with
allow-list/deny-list.
This reverts commit 53aa85af24.
The reason is that that patch changes the dbus api to be different than
the types declared by introspection api.
Replaces #16122.
The usual behaviour when a timeout expires is to terminate/kill the
service. This is what user usually want in production systems. To debug
services that fail to start/stop (especially sporadic failures) it
might be necessary to trigger the watchdog machinery and write core
dumps, though. Likewise, it is usually just a waste of time to
gracefully stop a stuck service. Instead it might save time to go
directly into kill mode.
This commit adds two new options to services: TimeoutStartFailureMode=
and TimeoutStopFailureMode=. Both take the same values and tweak the
behavior of systemd when a start/stop timeout expires:
* 'terminate': is the default behaviour as it has always been,
* 'abort': triggers the watchdog machinery and will send SIGABRT
(unless WatchdogSignal was changed) and
* 'kill' will directly send SIGKILL.
To handle the stop failure mode in stop-post state too a new
final-watchdog state needs to be introduced.
Currently, an empty assignment of Memory{Low,Min}= directives would be
interpretted as setting it to global default, i.e. zero. However, if we
set a runtime protection value on a unit that inherits parent's
DefaultMemory{Low,Min}=, it is not possible to revert it back to the
state where the DefaultMemory{Low,Min}= is propagated from parent
slice(s).
This patch changes the semantics of the empty assignments to explicitly
nullify any value set by the user previously. Since DBus API uses
uint64_t where 0 is a valid configuration, the patch modifies DBus API
by exploiting the variant type of property value to pass the NULL value.
When MemoryLow= or MemoryMin= is set, it is interpretted as setting the
values to infinity. This is inconsistent with the default initialization
to 0.
It'd be nice to interpret the empty assignment as fallback to
DefaultMemory* of parent slice, however, current DBus API cannot convey
such a NULL value, so stick to simply interpretting that as hard-wired
default.
Systems where a mount point is expected to be read-write needs a way to
fail mount units that fallback as read-only.
Add a property to allow setting the -w option when calling mount(8).
Just as `RuntimeMaxSec=` is supported for service units, add support for
it to scope units. This will gracefully kill a scope after the timeout
expires from the moment the scope enters the running state.
This could be used for time-limited login sessions, for example.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #12035
v2:
- if RestartKillSignal= is not specified, fall back to KillSignal=. This is necessary
to preserve backwards compatibility (and keep KillSignal= generally useful).
Introduce support for configuring cpus and mems for processes using
cgroup v2 CPUSET controller. This allows users to limit which cpus
and memory NUMA nodes can be used by processes to better utilize
system resources.
The cgroup v2 interfaces to control it are cpuset.cpus and cpuset.mems
where the requested configuration is written. However, it doesn't mean
that the requested configuration will be actually used as parent cgroup
may limit the cpus or mems as well. In order to reflect the real
configuration cgroup v2 provides read-only files cpuset.cpus.effective
and cpuset.mems.effective which are exported to users as well.
The "Ex" variant was originally only added for ExecStartXYZ= but it makes
sense to have feature parity for the rest of the exec command properties
as well (e.g. ExecReload=, ExecStop=, etc).
This way less stuff needs to be in basic. Initially, I wanted to move all the
parts of cgroup-utils.[ch] that depend on efivars.[ch] to shared, because
efivars.[ch] is in shared/. Later on, I decide to split efivars.[ch], so the
move done in this patch is not necessary anymore. Nevertheless, it is still
valid on its own. If at some point we want to expose libbasic, it is better to
to not have stuff that belong in libshared there.
We were passing 1/4th of the size in bytes as argument. So depending
on the size of the array, either we'd only transfer a subset of values,
or we'd get an alignment error.
Whenever I see EXTRACT_QUOTES, I'm always confused whether it means to
leave the quotes in or to take them out. Let's say "unquote", like we
say "cunescape".
Takes a single /sys/fs/bpf/pinned_prog string as argument, but may be
specified multiple times. An empty assignment resets all previous filters.
Closes https://github.com/systemd/systemd/issues/10227
Make possible to set NUMA allocation policy for manager. Manager's
policy is by default inherited to all forked off processes. However, it
is possible to override the policy on per-service basis. Currently we
support, these policies: default, prefer, bind, interleave, local.
See man 2 set_mempolicy for details on each policy.
Overall NUMA policy actually consists of two parts. Policy itself and
bitmask representing NUMA nodes where is policy effective. Node mask can
be specified using related option, NUMAMask. Default mask can be
overwritten on per-service level.
The CPU_SET_S api is pretty bad. In particular, it has a parameter for the size
of the array, but operations which take two (CPU_EQUAL_S) or even three arrays
(CPU_{AND,OR,XOR}_S) still take just one size. This means that all arrays must
be of the same size, or buffer overruns will occur. This is exactly what our
code would do, if it received an array of unexpected size over the network.
("Unexpected" here means anything different from what cpu_set_malloc() detects
as the "right" size.)
Let's rework this, and store the size in bytes of the allocated storage area.
The code will now parse any number up to 8191, independently of what the current
kernel supports. This matches the kernel maximum setting for any architecture,
to make things more portable.
Fixes#12605.
In cgroup v2 we have protection tunables -- currently MemoryLow and
MemoryMin (there will be more in future for other resources, too). The
design of these protection tunables requires not only intermediate
cgroups to propagate protections, but also the units at the leaf of that
resource's operation to accept it (by setting MemoryLow or MemoryMin).
This makes sense from an low-level API design perspective, but it's a
good idea to also have a higher-level abstraction that can, by default,
propagate these resources to children recursively. In this patch, this
happens by having descendants set memory.low to N if their ancestor has
DefaultMemoryLow=N -- assuming they don't set a separate MemoryLow
value.
Any affected unit can opt out of this propagation by manually setting
`MemoryLow` to some value in its unit configuration. A unit can also
stop further propagation by setting `DefaultMemoryLow=` with no
argument. This removes further propagation in the subtree, but has no
effect on the unit itself (for that, use `MemoryLow=0`).
Our use case in production is simplifying the configuration of machines
which heavily rely on memory protection tunables, but currently require
tweaking a huge number of unit files to make that a reality. This
directive makes that significantly less fragile, and decreases the risk
of misconfiguration.
After this patch is merged, I will implement DefaultMemoryMin= using the
same principles.
This adds a new per-service OOMPolicy= (along with a global
DefaultOOMPolicy=) that controls what to do if a process of the service
is killed by the kernel's OOM killer. It has three different values:
"continue" (old behaviour), "stop" (terminate the service), "kill" (let
the kernel kill all the service's processes).
On top of that, track OOM killer events per unit: generate a per-unit
structured, recognizable log message when we see an OOM killer event,
and put the service in a failure state if an OOM killer event was seen
and the selected policy was not "continue". A new "result" is defined
for this case: "oom-kill".
All of this relies on new cgroupv2 kernel functionality: the
"memory.events" notification interface and the "memory.oom.group"
attribute (which makes the kernel kill all cgroup processes
automatically).