The advantage is that is the name is mispellt, cpp will warn us.
$ git grep -Ee "conf.set\('(HAVE|ENABLE)_" -l|xargs sed -r -i "s/conf.set\('(HAVE|ENABLE)_/conf.set10('\1_/"
$ git grep -Ee '#ifn?def (HAVE|ENABLE)' -l|xargs sed -r -i 's/#ifdef (HAVE|ENABLE)/#if \1/; s/#ifndef (HAVE|ENABLE)/#if ! \1/;'
$ git grep -Ee 'if.*defined\(HAVE' -l|xargs sed -i -r 's/defined\((HAVE_[A-Z0-9_]*)\)/\1/g'
$ git grep -Ee 'if.*defined\(ENABLE' -l|xargs sed -i -r 's/defined\((ENABLE_[A-Z0-9_]*)\)/\1/g'
+ manual changes to meson.build
squash! build-sys: use #if Y instead of #ifdef Y everywhere
v2:
- fix incorrect setting of HAVE_LIBIDN2
When automatic /tmp mount was introduced to nspawn in v219, it was done without having the nosuid and nodev mount options, which was the same case as systemd's default tmp.mount unit back then.
nosuid and nodev was added to tmp.mount(.m4) in v231 for security reasons. matching the nspawn /tmp mount entry against that.
Ref.:
2f9df7c96abbb99c30d0
We use our cgroup APIs in various contexts, including from our libraries
sd-login, sd-bus. As we don#t control those environments we can't rely
that the unified cgroup setup logic succeeds, and hence really shouldn't
assert on it.
This more or less reverts 415fc41cea.
Currently the hybrid mode mounts cgroup v2 on /sys/fs/cgroup instead of the v1
name=systemd hierarchy. While this works fine for systemd itself, it breaks
tools which expect cgroup v1 hierarchy on /sys/fs/cgroup/systemd.
This patch updates the hybrid mode so that it mounts v2 hierarchy on
/sys/fs/cgroup/unified and keeps v1 "name=systemd" hierarchy on
/sys/fs/cgroup/systemd for compatibility. systemd itself doesn't depend on the
"name=systemd" hierarchy at all. All operations take place on the v2 hierarchy
as before but the v1 hierarchy is kept in sync so that any tools which expect
it to be there can keep doing so. This allows systemd to take advantage of
cgroup v2 process management without requiring other tools to be aware of the
hybrid mode.
The hybrid mode is implemented by mapping the special systemd controller to
/sys/fs/cgroup/unified and making the basic cgroup utility operations -
cg_attach(), cg_create(), cg_rmdir() and cg_trim() - also operate on the
/sys/fs/cgroup/systemd hierarchy whenever the cgroup2 hierarchy is updated.
While a bit messy, this will allow dropping complications from using cgroup v1
for process management a lot sooner than otherwise possible which should make
it a net gain in terms of maintainability.
v2: Fixed !cgns breakage reported by @evverx and renamed the unified mount
point to /sys/fs/cgroup/unified as suggested by @brauner.
v3: chown the compat hierarchy too on delegation. Suggested by @evverx.
v4: [zj]
- drop the change to default, full "legacy" is still the default.
cg_[all_]unified() test whether a specific controller or all controllers are on
the unified hierarchy. While what's being asked is a simple binary question,
the callers must assume that the functions may fail any time, which
unnecessarily complicates their usages. This complication is unnecessary.
Internally, the test result is cached anyway and there are only a few places
where the test actually needs to be performed.
This patch simplifies cg_[all_]unified().
* cg_[all_]unified() are updated to return bool. If the result can't be
decided, assertion failure is triggered. Error handlings from their callers
are dropped.
* cg_unified_flush() is updated to calculate the new result synchrnously and
return whether it succeeded or not. Places which need to flush the test
result are updated to test for failure. This ensures that all the following
cg_[all_]unified() tests succeed.
* Places which expected possible cg_[all_]unified() failures are updated to
call and test cg_unified_flush() before calling cg_[all_]unified(). This
includes functions used while setting up mounts during boot and
manager_setup_cgroup().
Add a new --pivot-root argument to systemd-nspawn, which specifies a
directory to pivot to / inside the container; while the original / is
pivoted to another specified directory (if provided). This adds
support for booting container images which may contain several bootable
sysroots, as is common with OSTree disk images. When these disk images
are booted on real hardware, ostree-prepare-root is run in conjunction
with sysroot.mount in the initramfs to achieve the same results.
This moves the VolatileMode enum and its helper functions to src/shared/. This
is useful to then reuse them to implement systemd.volatile= in a later commit.
This extends the --bind= and --overlay= syntax so that an empty string as source/upper
directory is taken as request to automatically allocate a temporary directory
below /var/tmp, whose lifetime is bound to the nspawn runtime. In combination
with the "+" path extension this permits a switch "--overlay=+/var::/var" in
order to use the container's shipped /var, combine it with a writable temporary
directory and mount it to the runtime /var of the container.
If a source path is prefixed with "+" it is taken relative to the container's
root directory instead of the host. This permits easily establishing bind and
overlay mounts based on data from the container rather than the host.
This also reworks custom_mounts_prepare(), and turns it into two functions: one
custom_mount_check_all() that remains in nspawn.c but purely verifies the
validity of the custom mounts configured. And one called
custom_mount_prepare_all() that actually does the preparation step, sorts the
custom mounts, resolves relative paths, and allocates temporary directories as
necessary.
Let's remove chase_symlinks_prefix() and instead introduce a flags parameter to
chase_symlinks(), with a flag CHASE_PREFIX_ROOT that exposes the behaviour of
chase_symlinks_prefix().
Let's use chase_symlinks() everywhere, and stop using GNU
canonicalize_file_name() everywhere. For most cases this should not change
behaviour, however increase exposure of our function to get better tested. Most
importantly in a few cases (most notably nspawn) it can take the correct root
directory into account when chasing symlinks.
This commit adds the possibility to leave /sys, and /proc/sys read-write.
It introduces a new (undocumented) env var SYSTEMD_NSPAWN_API_VFS_WRITABLE
to enable this feature.
If set to "yes", /sys, and /proc/sys will be read-write.
If set to "no", /sys, and /proc/sys will be read-only.
If set to "network" /proc/sys/net will be read-write. This is useful in
use-cases, where systemd-nspawn is used in an external network
namespace.
This adds the possibility to start privileged containers which need more
control over settings in the /proc, and /sys filesystem.
This is also a follow-up on the discussion from
https://github.com/systemd/systemd/pull/4018#r76971862 where an
introduction of a simple env var to enable R/W support for those
directories was already discussed.
If allocation fails, the value of the point is "undefined". In practice
this matters very little, but for consistency with rest of the code,
let's check the return value.
This makes it easier to debug failed nspawn invocations:
Mounting sysfs on /var/lib/machines/fedora-rawhide/sys (MS_RDONLY|MS_NOSUID|MS_NOEXEC|MS_NODEV "")...
Mounting tmpfs on /var/lib/machines/fedora-rawhide/dev (MS_NOSUID|MS_STRICTATIME "mode=755,uid=1450901504,gid=1450901504")...
Mounting tmpfs on /var/lib/machines/fedora-rawhide/dev/shm (MS_NOSUID|MS_NODEV|MS_STRICTATIME "mode=1777,uid=1450901504,gid=1450901504")...
Mounting tmpfs on /var/lib/machines/fedora-rawhide/run (MS_NOSUID|MS_NODEV|MS_STRICTATIME "mode=755,uid=1450901504,gid=1450901504")...
Bind-mounting /sys/fs/selinux on /var/lib/machines/fedora-rawhide/sys/fs/selinux (MS_BIND "")...
Remounting /var/lib/machines/fedora-rawhide/sys/fs/selinux (MS_RDONLY|MS_NOSUID|MS_NOEXEC|MS_NODEV|MS_BIND|MS_REMOUNT "")...
Mounting proc on /proc (MS_NOSUID|MS_NOEXEC|MS_NODEV "")...
Bind-mounting /proc/sys on /proc/sys (MS_BIND "")...
Remounting /proc/sys (MS_RDONLY|MS_NOSUID|MS_NOEXEC|MS_NODEV|MS_BIND|MS_REMOUNT "")...
Bind-mounting /proc/sysrq-trigger on /proc/sysrq-trigger (MS_BIND "")...
Remounting /proc/sysrq-trigger (MS_RDONLY|MS_NOSUID|MS_NOEXEC|MS_NODEV|MS_BIND|MS_REMOUNT "")...
Mounting tmpfs on /tmp (MS_STRICTATIME "mode=1777,uid=0,gid=0")...
Mounting tmpfs on /sys/fs/cgroup (MS_NOSUID|MS_NOEXEC|MS_NODEV|MS_STRICTATIME "mode=755,uid=0,gid=0")...
Mounting cgroup on /sys/fs/cgroup/systemd (MS_NOSUID|MS_NOEXEC|MS_NODEV "none,name=systemd,xattr")...
Failed to mount cgroup on /sys/fs/cgroup/systemd (MS_NOSUID|MS_NOEXEC|MS_NODEV "none,name=systemd,xattr"): No such file or directory
Previously, if ReadWritePaths= was nested inside a ReadOnlyPaths=
specification, then we'd first recursively apply the ReadOnlyPaths= paths, and
make everything below read-only, only in order to then flip the read-only bit
again for the subdirs listed in ReadWritePaths= below it.
This is not only ugly (as for the dirs in question we first turn on the RO bit,
only to turn it off again immediately after), but also problematic in
containers, where a container manager might have marked a set of dirs read-only
and this code will undo this is ReadWritePaths= is set for any.
With this patch behaviour in this regard is altered: ReadOnlyPaths= will not be
applied to the children listed in ReadWritePaths= in the first place, so that
we do not need to turn off the RO bit for those after all.
This means that ReadWritePaths=/ReadOnlyPaths= may only be used to turn on the
RO bit, but never to turn it off again. Or to say this differently: if some
dirs are marked read-only via some external tool, then ReadWritePaths= will not
undo it.
This is not only the safer option, but also more in-line with what the man page
currently claims:
"Entries (files or directories) listed in ReadWritePaths= are
accessible from within the namespace with the same access rights as
from outside."
To implement this change bind_remount_recursive() gained a new "blacklist"
string list parameter, which when passed may contain subdirs that shall be
excluded from the read-only mounting.
A number of functions are updated to add more debug logging to make this more
digestable.
Currently, systemd uses either the legacy hierarchies or the unified hierarchy.
When the legacy hierarchies are used, systemd uses a named legacy hierarchy
mounted on /sys/fs/cgroup/systemd without any kernel controllers for process
management. Due to the shortcomings in the legacy hierarchy, this involves a
lot of workarounds and complexities.
Because the unified hierarchy can be mounted and used in parallel to legacy
hierarchies, there's no reason for systemd to use a legacy hierarchy for
management even if the kernel resource controllers need to be mounted on legacy
hierarchies. It can simply mount the unified hierarchy under
/sys/fs/cgroup/systemd and use it without affecting other legacy hierarchies.
This disables a significant amount of fragile workaround logics and would allow
using features which depend on the unified hierarchy membership such bpf cgroup
v2 membership test. In time, this would also allow deleting the said
complexities.
This patch updates systemd so that it prefers the unified hierarchy for the
systemd cgroup controller hierarchy when legacy hierarchies are used for kernel
resource controllers.
* cg_unified(@controller) is introduced which tests whether the specific
controller in on unified hierarchy and used to choose the unified hierarchy
code path for process and service management when available. Kernel
controller specific operations remain gated by cg_all_unified().
* "systemd.legacy_systemd_cgroup_controller" kernel argument can be used to
force the use of legacy hierarchy for systemd cgroup controller.
* nspawn: By default nspawn uses the same hierarchies as the host. If
UNIFIED_CGROUP_HIERARCHY is set to 1, unified hierarchy is used for all. If
0, legacy for all.
* nspawn: arg_unified_cgroup_hierarchy is made an enum and now encodes one of
three options - legacy, only systemd controller on unified, and unified. The
value is passed into mount setup functions and controls cgroup configuration.
* nspawn: Interpretation of SYSTEMD_CGROUP_CONTROLLER to the actual mount
option is moved to mount_legacy_cgroup_hierarchy() so that it can take an
appropriate action depending on the configuration of the host.
v2: - CGroupUnified enum replaces open coded integer values to indicate the
cgroup operation mode.
- Various style updates.
v3: Fixed a bug in detect_unified_cgroup_hierarchy() introduced during v2.
v4: Restored legacy container on unified host support and fixed another bug in
detect_unified_cgroup_hierarchy().
A following patch will update cgroup handling so that the systemd controller
(/sys/fs/cgroup/systemd) can use the unified hierarchy even if the kernel
resource controllers are on the legacy hierarchies. This would require
distinguishing whether all controllers are on cgroup v2 or only the systemd
controller is. In preparation, this patch renames cg_unified() to
cg_all_unified().
This patch doesn't cause any functional changes.
Normally we make all of /proc/sys read-only in a container, but if we do have
netns enabled we can make /proc/sys/net writable, as things are virtualized
then.
Such mkdir errors happen for example when trying to mkdir /sys/fs/selinux.
/sys is documented to be readonly in the container, so mkdir errors below /sys
can be expected.
They shouldn't be logged as warnings since they lead users to think that
there is something wrong.
(NOTE: Cgroup namespaces work with legacy and unified hierarchies: "This is
completely backward compatible and will be completely invisible to any existing
cgroup users (except for those running inside a cgroup namespace and looking at
/proc/pid/cgroup of tasks outside their namespace.)"
(https://lists.linuxfoundation.org/pipermail/containers/2016-January/036582.html)
So there is no need to special case unified.)
If cgroup namespaces are supported we skip mount_cgroups() in the
outer_child(). Instead, we unshare(CLONE_NEWCGROUP) in the inner_child() and
only then do we call mount_cgroups().
The clean way to handle cgroup namespaces would be to delegate mounting of
cgroups completely to the init system in the container. However, this would
likely break backward compatibility with the UNIFIED_CGROUP_HIERARCHY flag of
systemd-nspawn. Also no cgroupfs would be mounted whenever the user simply
requests a shell and no init is available to mount cgroups. Hence, we introduce
mount_legacy_cgns_supported(). After calling unshare(CLONE_NEWCGROUP) it parses
/proc/self/cgroup to find the mounted controllers and mounts them inside the
new cgroup namespace. This should preserve backward compatibility with the
UNIFIED_CGROUP_HIERARCHY flag and mount a cgroupfs when no init in the
container is running.
Since Linux v4.4-rc1, __DEVEL__sane_behavior does not exist anymore and
is replaced by a new fstype "cgroup2".
With this patch, systemd no longer supports the old (unstable) way of
doing unified hierarchy with __DEVEL__sane_behavior and systemd now
requires Linux v4.4 for unified hierarchy.
Non-unified hierarchy is still the default and is unchanged by this
patch.
67e9c74b8a