This is a follow-up for 9f83091e3c.
Instead of reading the mtime off the configuration files after reading,
let's do so before reading, but with the fd we read the data from. This
is not only cleaner (as it allows us to save one stat()), but also has
the benefit that we'll detect changes that happen while we read the
files.
This also reworks unit file drop-ins to use the common code for
determining drop-in mtime, instead of reading system clock for that.
Let's go one step further and upgrade implicitly. Usually =syslog
assignments are historic artifacts only. Let's upgrade the lines
automatically, and politely suggest people update their unit
files/configuration (and drop the lines altogether, without
replacement).
Fixes: #15807
This reworks the user validation infrastructure. There are now two
modes. In regular mode we are strict and test against a strict set of
valid chars. And in "relaxed" mode we just filter out some really
obvious, dangerous stuff. i.e. strict is whitelisting what is OK, but
"relaxed" is blacklisting what is really not OK.
The idea is that we use strict mode whenver we allocate a new user
(i.e. in sysusers.d or homed), while "relaxed" mode is when we process
users registered elsewhere, (i.e. userdb, logind, …)
The requirements on user name validity vary wildly. SSSD thinks its fine
to embedd "@" for example, while the suggested NAME_REGEX field on
Debian does not even allow uppercase chars…
This effectively liberaralizes a lot what we expect from usernames.
The code that warns about questionnable user names is now optional and
only used at places such as unit file parsing, so that it doesn't show
up on every userdb query, but only when processing configuration files
that know better.
Fixes: #15149#15090
In subsequent commits, calls to if_nametoindex() will be replaced by a wrapper
that falls back to alternative name resolution over netlink. netlink support
requires libsystemd (for sd-netlink), and we don't want to add any functions
that require netlink in basic/. So stuff that calls if_nametoindex() for user
supplied interface names, and everything that depends on that, needs to be
moved.
This partially reverts a07a7324ad.
We have two pieces of information: the value and a boolean.
config_parse_timeout_abort() added in the reverted commit would write
the boolean to the usec_t value, making a mess.
The code is reworked to have just one implementation and two wrappers
which pass two pointers.
The conf-parser machinery already removed whitespace before and after "=", no
need to repeat this step.
The test is adjusted to pass. It was testing an code path that doesn't happen
normally, no point in doing that.
The original PR was submitted with CPUSetCpus and CPUSetMems, which was later
changed to AllowedCPUs and AllowedMemmoryNodes everywhere (including the parser
used by systemd-run), but not in the parser for unit files.
Since we already released -rc1, let's keep support for the old names. I think
we can remove it in a release or two if anyone remembers to do that.
Fixes#14126. Follow-up for 047f5d63d7.
TasksMax= and DefaultTasksMax= can be specified as percentages. We don't
actually document of what the percentage is relative to, but the implementation
uses the smallest of /proc/sys/kernel/pid_max, /proc/sys/kernel/threads-max,
and /sys/fs/cgroup/pids.max (when present). When the value is a percentage,
we immediately convert it to an absolute value. If the limit later changes
(which can happen e.g. when systemd-sysctl runs), the absolute value becomes
outdated.
So let's store either the percentage or absolute value, whatever was specified,
and only convert to an absolute value when the value is used. For example, when
starting a unit, the absolute value will be calculated when the cgroup for
the unit is created.
Fixes#13419.
This makes it easy to tell that the function only uses the Unit* for
reporting, and only makes changes to the other argument (which most likely
also points at the same Unit structure) for modifications.
Introduce support for configuring cpus and mems for processes using
cgroup v2 CPUSET controller. This allows users to limit which cpus
and memory NUMA nodes can be used by processes to better utilize
system resources.
The cgroup v2 interfaces to control it are cpuset.cpus and cpuset.mems
where the requested configuration is written. However, it doesn't mean
that the requested configuration will be actually used as parent cgroup
may limit the cpus or mems as well. In order to reflect the real
configuration cgroup v2 provides read-only files cpuset.cpus.effective
and cpuset.mems.effective which are exported to users as well.
This way less stuff needs to be in basic. Initially, I wanted to move all the
parts of cgroup-utils.[ch] that depend on efivars.[ch] to shared, because
efivars.[ch] is in shared/. Later on, I decide to split efivars.[ch], so the
move done in this patch is not necessary anymore. Nevertheless, it is still
valid on its own. If at some point we want to expose libbasic, it is better to
to not have stuff that belong in libshared there.
During the rework of unit file loading, commit e8630e6952 dropped the
initialization u->source_mtime. This had the bad side effect that generated
units always needed daemon reloading.
People do have usernames with dots, and it makes them very unhappy that systemd
doesn't like their that. It seems that there is no actual problem with allowing
dots in the username. In particular chown declares ":" as the official
separator, and internally in systemd we never rely on "." as the seperator
between user and group (nor do we call chown directly). Using dots in the name
is probably not a very good idea, but we don't need to care. Debian tools
(adduser) do not allow users with dots to be created.
This patch allows *existing* names with dots to be used in User, Group,
SupplementaryGroups, SocketUser, SocketGroup fields, both in unit files and on
the command line. DynamicUsers and sysusers still follow the strict policy.
user@.service and tmpfiles already allowed arbitrary user names, and this
remains unchanged.
Fixes#12754.
v2:
- do not watch mtime of transient and generated dirs
We'd reload the map after every transient unit we created, which we don't
need to do, since we create those units ourselves and know their fragment
path.
This reworks how we load units from disk. Instead of chasing symlinks every
time we are asked to load a unit by name, we slurp all symlinks from disk
and build two hashmaps:
1. from unit name to either alias target, or fragment on disk
(if an alias, we put just the target name in the hashmap, if a fragment
we put an absolute path, so we can distinguish both).
2. from a unit name to all aliases
Reading all this data can be pretty costly (40 ms) on my machine, so we keep it
around for reuse.
The advantage is that we can reliably know what all the aliases of a given unit
are. This means we can reliably load dropins under all names. This fixes#11972.
I opted to embed the Bitmap structure directly in the ExitStatusSet.
This means that memory usage is a bit higher for units which don't define
this setting:
Service changes:
/* size: 2720, cachelines: 43, members: 73 */
/* sum members: 2680, holes: 9, sum holes: 39 */
/* sum bitfield members: 7 bits, bit holes: 1, sum bit holes: 1 bits */
/* last cacheline: 32 bytes */
/* size: 2816, cachelines: 44, members: 73 */
/* sum members: 2776, holes: 9, sum holes: 39 */
/* sum bitfield members: 7 bits, bit holes: 1, sum bit holes: 1 bits */
But this way the code is simpler and we do less pointer chasing.
Whenever I see EXTRACT_QUOTES, I'm always confused whether it means to
leave the quotes in or to take them out. Let's say "unquote", like we
say "cunescape".
We'd skip any whitespace immediately after "=", but then we'd treat whitespace
that is between "|" or "!" and the value as significant. This is rather
confusing, let's ignore it too.
Takes a single /sys/fs/bpf/pinned_prog string as argument, but may be
specified multiple times. An empty assignment resets all previous filters.
Closes https://github.com/systemd/systemd/issues/10227
Make possible to set NUMA allocation policy for manager. Manager's
policy is by default inherited to all forked off processes. However, it
is possible to override the policy on per-service basis. Currently we
support, these policies: default, prefer, bind, interleave, local.
See man 2 set_mempolicy for details on each policy.
Overall NUMA policy actually consists of two parts. Policy itself and
bitmask representing NUMA nodes where is policy effective. Node mask can
be specified using related option, NUMAMask. Default mask can be
overwritten on per-service level.
The CPU_SET_S api is pretty bad. In particular, it has a parameter for the size
of the array, but operations which take two (CPU_EQUAL_S) or even three arrays
(CPU_{AND,OR,XOR}_S) still take just one size. This means that all arrays must
be of the same size, or buffer overruns will occur. This is exactly what our
code would do, if it received an array of unexpected size over the network.
("Unexpected" here means anything different from what cpu_set_malloc() detects
as the "right" size.)
Let's rework this, and store the size in bytes of the allocated storage area.
The code will now parse any number up to 8191, independently of what the current
kernel supports. This matches the kernel maximum setting for any architecture,
to make things more portable.
Fixes#12605.
These make sense to be explicitly set at 0 (which has a different effect
than the default, since it can affect processing of `DefaultMemoryXXX`).
Without this, it's not easily possible to relinquish memory protection
for a subtree, which is not great.