This is a continuation of e3e0314b systemctl: allow globbing in commands
which take multiple unit names.
Multiple patterns can be specified, as separate arguments, or as one argument
with patterns seperated by commas.
If patterns are given, at least one unit must be matched (by any of the patterns).
This is different behaviour than systemctl, but here it is necessary because
otherwise anything would be matched, which is unlikely to be the intended
behaviour.
https://bugs.freedesktop.org/show_bug.cgi?id=59336
This flag shouldn't try and consume the following argument. It should
behave like every other flag which takes an optional argument when
parsed by getopt_long.
-- fix grammar and reword some descriptions for clarity
-- add a useful description of what --follow does
-- fix the description for --after-cursor
-- properly introduce the FSS acronym for "Forward Secure Sealing" in
both sections
-- clarify the --disk-usage command
[zj: perform similar changes to zsh completions]
squash! journalctl: fix several issues in --help message text
This adds the new library call sd_journal_open_container() and a new
"-M" switch to journalctl. Particular care is taken that journalctl's
"-b" switch resolves to the current boot ID of the container, not the
host.
The only problem is that libgen.h #defines basename to point to it's
own broken implementation instead of the GNU one. This can be fixed
by #undefining basename.
Suggested by David Wilkins <dwilkins@maths.tcd.ie> in
https://bugzilla.redhat.com/show_bug.cgi?id=967521:
> [Specific boot ID is a] bit of a palaver to obtain. I consulted the
> verbose dump of the journal to discover the _BOOT_ID for the
> timestamp, and then generated the journal dump for that boot using
> journalctl _BOOT_ID=foo -o short-monotonic.
This extends 62678ded 'efi: never call qsort on potentially
NULL arrays' to all other places where qsort is used and it
is not obvious that the count is non-zero.
We already shew lines in full when using a pager or not on a
tty. The commit disables ellipsization in the sole remaining case,
namely when --follow is used.
This has been a popular request for a long time, and indeed, full
output seems much more useful. Old behaviour can still be requested by
using --no-full. Old options retain their behaviour for compatiblity,
but aren't advertised as much. This change applies only to jornalctl,
not to systemctl, when ellipsization is useful to keep the layout.
https://bugzilla.redhat.com/show_bug.cgi?id=984758
Vacuuming behaviour is a bit confusing, and/or we have some bugs,
so those additional messages should help to find out what's going
on. Also, rotation of journal files shouldn't be happening too
often, so the level of the messages is bumped to info, so that
they'll be logged under normal operation.
In case of scripts, _EXE is set to the interpreter name, and
_COMM is set based on the file name. Add a match for _COMM,
and _EXE if the interpreter is not a link (e.g. for yum,
the interpreter is /usr/bin/python, but it is a link to
/usr/bin/python2, which in turn is a link to /usr/bin/python2.7,
at least on Fedora, so we end up with _EXE=/usr/bin/python2.7).
I don't think that such link chasing makes sense, because
the final _EXE name is more likely to change.
Instead of :-0, :1, :5, etc., use -0, 1 or +1, 5, etc. For BOOT_ID+OFFSET,
use BOOT_ID+offset or BOOT_ID-offset (either + or - is required).
Also make error handling a bit more robust and verbose.
Modify the man page to describe the most common case (-b) first,
and the second most common case (-b -1) second.
Hi,
I redid the boot ID look up to use enumerate_unique.
This is quite fast if the cache is warm but painfully slow if
it isn't. It has a slight chance of returning the wrong order if
realtime clock jumps around.
This one has to do n searches for every boot ID there is plus
a sort, so it depends heavily on cache hotness. This is in contrast
to the other way of look-up through filtering by a MESSAGE_ID,
which only needs about 1 seek + whatever amount of relative IDs
you want to walk.
I also have a linked-list + (in-place) mergesort version of this
patch, which has pretty much the same runtime. But since this one
is using libc sorting and armortized allocation, I prefer this
one.
To summarize: The MESSAGE_ID way is a *lot* faster but can be
incomplete due to rotation, while the enumerate+sort will find
every boot ID out there but will be painfully slow for large
journals and cold caches.
You choose :P
Jan
Generating seed...
Generating key pair...
Generating sealing key...
Failed to open /var/log/journal/33f46101703a10c5fc6fa4f451840101/fss.tmp.k2wDDU: No such file or directory
--user basically gives messages from your own systemd --user services.
--system basically gives messages from PID 1, kernel, and --system
services. Those two options are not exahustive, because a priviledged
user might be able to see messages from other users, and they will not
be shown with either or both of those flags.
$ journalctl -o verbose _EXE=/quiet/binary -f
-- Logs begin at Sun 2013-03-17 17:28:22 EDT. --
Failed to get realtime timestamp: Cannot assign requested address
JOURNAL_FOREACH_DATA_RETVAL is added, which allows the caller
to get the return value from sd_journal_enumerate_data. I think
we might want to expose this macro like SD_JOURNAL_FOREACH_DATA,
but for now it is in journal-internal.h.
There's a change in behaviour for output_*, not only in
output_verbose, that errors in sd_j_enumerate_data are not silently
ignored anymore.
https://bugs.freedesktop.org/show_bug.cgi?id=56459
Also reworded a few debug messages for brevity, and added a log
statement which prints out the filter at debug level:
Journal filter: (((UNIT=sys-module-configfs.device AND _PID=1) OR (COREDUMP_UNIT=sys-module-configfs.device AND MESSAGE_ID=fc2e22bc6ee647b6b90729ab34a250b1) OR _SYSTEMD_UNIT=sys-module-configfs.device) AND _BOOT_ID=4e3c518ab0474c12ac8de7896fe6b154)
Previously only one "--unit=" or "--user-unit" could be specified.
With this patch, journalcrtl can show multiple units.
$ journalctl -u systemd-udevd.service -u sshd.service -u crond.service -b
-- Logs begin at Sa 2013-03-23 11:08:45 CET, end at Fr 2013-04-12
09:10:22 CEST. --
Apr 12 08:41:37 lenovo systemd[1]: Started udev Kernel Device Manager.
Apr 12 08:41:37 lenovo systemd[1]: Stopped udev Kernel Device Manager.
Apr 12 08:41:38 lenovo systemd[1]: Started udev Kernel Device Manager.
Apr 12 08:41:38 lenovo crond[291]: (CRON) INFO (Syslog will be used
instead of sendmail.)
Apr 12 08:41:38 lenovo crond[291]: (CRON) INFO (running with inotify
support)
Apr 12 08:41:39 lenovo systemd[1]: Starting OpenSSH server daemon...
Apr 12 08:41:39 lenovo systemd[1]: Started OpenSSH server daemon.
Apr 12 08:41:39 lenovo sshd[355]: Server listening on 0.0.0.0 port 22.
Apr 12 08:41:39 lenovo sshd[355]: Server listening on :: port 22.
Apr 12 08:41:39 lenovo mtp-probe[373]: checking bus 1, device 8:
"/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5.6/1-1.5.6.2/1-1.5.6.2.1"
When using "-p" and "-b" in combination with "-u", the output is not
what you would expect. The reason is the sd_journal_add_disjunction()
call in add_matches_for_unit() and add_matches_for_user_unit(), which
adds two ORs without taking the other conditions to every OR.
Adding another level on top with AND and sd_journal_add_conjunction()
solves the problem.
Output before:
$ journalctl -o short-monotonic -ab -p 0 -u sshd.service
-- Reboot --
[ 3.216305] lenovo systemd[1]: Starting OpenSSH server daemon...
-- Reboot --
[ 3.168666] lenovo systemd[1]: Starting OpenSSH server daemon...
[ 3.169639] lenovo systemd[1]: Started OpenSSH server daemon.
[36285.635389] lenovo systemd[1]: Stopped OpenSSH server daemon.
-- Reboot --
[ 10.838657] lenovo systemd[1]: Starting OpenSSH server daemon...
[ 10.913698] lenovo systemd[1]: Started OpenSSH server daemon.
[ 6881.035183] lenovo systemd[1]: Stopped OpenSSH server daemon.
-- Reboot --
[ 6.636228] lenovo systemd[1]: Starting OpenSSH server daemon...
[ 6.662573] lenovo systemd[1]: Started OpenSSH server daemon.
[ 6.681148] lenovo sshd[397]: Server listening on 0.0.0.0 port 22.
[ 6.681379] lenovo sshd[397]: Server listening on :: port 22.
As we see, the output is from _every_ boot and priority 0 is not taken
into account.
Output after patch:
$ journalctl -o short-monotonic -ab -p 0 -u sshd.service
-- Logs begin at Sun 2013-02-24 20:54:44 CET, end at Tue 2013-03-19 14:58:21 CET. --
Increasing the priority:
$ journalctl -o short-monotonic -ab -p 6 -u sshd.service
-- Logs begin at Sun 2013-02-24 20:54:44 CET, end at Tue 2013-03-19 14:59:12 CET. --
[ 6.636228] lenovo systemd[1]: Starting OpenSSH server daemon...
[ 6.662573] lenovo systemd[1]: Started OpenSSH server daemon.
[ 6.681148] lenovo sshd[397]: Server listening on 0.0.0.0 port 22.
[ 6.681379] lenovo sshd[397]: Server listening on :: port 22.
I see little point in silently truncating fields when
they are explictly requested. With this change e.g.
journalctl -b MESSAGE_ID=9f26aa562cf440c2b16c773d0479b518 --field=BOOTCHART
works as expected.
This function should be used when filling in "struct pollfd"'s .events
field for watching the journal. It will always return POLLIN for now,
but we should keep our options open to change this later on.
This mimics libsystemd-bus' sd_bus_get_events() call with the same
purpose.
Instead of outputting "5h 55s 50ms 3us" we'll now output "5h
55.050003s". Also, while outputting the accuracy is configurable.
Basically we now try use "dot notation" for all time values > 1min. For
>= 1s we use 's' as unit, otherwise for >= 1ms we use 'ms' as unit, and
finally 'us'.
This should give reasonably values in most cases.
Internally we store all time values in usec_t, however parse_usec()
actually was used mostly to parse values in seconds (unless explicit
units were specified to define a different unit). Hence, be clear about
this and name the function about what we pass into it, not what we get
out of it.
In order to write tests for the catalog functions, they
are made non-static and start taking a 'database' parameter,
which is the name of a file with the preprocessed catalog
entries.
This makes it possible to make test-catalog part of the
normal test suite, since it now only operates on files
in /tmp.
Some more tests are added.
