This adds basic DHCPv4 support. Link-sense is enabled unconditionally,
but the plan is to make that configurable.
I tested this in a VM with lots of NICs and over wifi in the various
coffee shops I found this Christmas, but more testing would definitely
be appreciated.
A bridge is specified in a .netdev file with a section [Bridge]
and at least the entry Name=.
A link may be joined to a bridge if the .network applied to it has
a Bridge= entry giving the name of the bridge in its [Network] section.
We eagerly create all bridges on startup, and links are added to
bridges as soon as they both appear.
This will allow specifying more options per address than the
simple Address= entry in the [Network] section.
Preliminary support for the same functionality for [Route] sections
are added, but not yet hooked up, as more testing is needed.
This daemon listens for and configures network devices tagged with
'systemd-networkd'. By default, no devices are tagged so this daemon
can safely run in parallel with existing network daemons/scripts.
Networks are configured in /etc/systemd/network/*.network. The first .network
file that matches a given link is applied. The matching logic is similar to
the one for .link files, but additionally supports matching on interface name.
The mid-term aim is to provide an alternative to ad-hoc scripts currently used
in initrd's and for wired setups that don't change much (e.g., as seen on
servers/and some embedded systems).
Currently, static addresses and a gateway can be configured.
Example .network file:
[Match]
Name=wlp2s0
[Network]
Description=My Network
Gateway=192.168.1.1
Address=192.168.1.23/24
Address=fe80::9aee:94ff:fe3f:c618/64
