There are more than enough calls doing string manipulations to deserve
its own files, hence do something about it.
This patch also sorts the #include blocks of all files that needed to be
updated, according to the sorting suggestions from CODING_STYLE. Since
pretty much every file needs our string manipulation functions this
effectively means that most files have sorted #include blocks now.
Also touches a few unrelated include files.
This adds support for naming file descriptors passed using socket
activation. The names are passed in a new $LISTEN_FDNAMES= environment
variable, that matches the existign $LISTEN_FDS= one and contains a
colon-separated list of names.
This also adds support for naming fds submitted to the per-service fd
store using FDNAME= in the sd_notify() message.
This also adds a new FileDescriptorName= setting for socket unit files
to set the name for fds created by socket units.
This also adds a new call sd_listen_fds_with_names(), that is similar to
sd_listen_fds(), but also returns the names of the fds.
systemd-activate gained the new --fdname= switch to specify a name for
testing socket activation.
This is based on #1247 by Maciej Wereski.
Fixes#1247.
Writable= is a new boolean setting. If ture, then ListenSpecial= will
open the specified path in O_RDWR mode, rather than just O_RDONLY.
This is useful for implementing services like rfkill, where /dev/rfkill
is more useful when opened in write mode, if we want to not only save
but also restore its state.
This patch removes includes that are not used. The removals were found with
include-what-you-use which checks if any of the symbols from a header is
in use.
This is what we have done so far for all other time values, and hence we
should do this here. This indicates the default unit of time values
specified here, if they don't contain a unit.
TCP_DEFER_ACCEPT Allow a listener to be awakened only when data
arrives on the socket. If TCP_DEFER_ACCEPT set on a server-side
listening socket, the TCP/IP stack will not to wait for the final
ACK packet and not to initiate the process until the first packet
of real data has arrived. After sending the SYN/ACK, the server will
then wait for a data packet from a client. Now, only three packets
will be sent over the network, and the connection establishment delay
will be significantly reduced.
The tcp keep alive variables now can be configured via conf
parameter. Follwing variables are now supported by this patch.
tcp_keepalive_intvl: The number of seconds between TCP keep-alive probes
tcp_keepalive_probes: The maximum number of TCP keep-alive probes to
send before giving up and killing the connection if no response is
obtained from the other end.
tcp_keepalive_time: The number of seconds a connection needs to be
idle before TCP begins sending out keep-alive probes.
This reverts commit 9528592ff8.
Apparently TFO is actually the default at least for the server side now.
Also the setsockopt doesn't actually take a bool, but a qlen integer.
TCP Fast Open (TFO) speeds up the opening of successiveTCP)
connections between two endpoints.It works by using a TFO cookie
in the initial SYN packet to authenticate a previously connected
client. It starts sending data to the client before the receipt
of the final ACK packet of the three way handshake is received,
skipping a round trip and lowering the latency in the start of
transmission of data.
With Symlinks= we can manage one or more symlinks to AF_UNIX or FIFO
nodes in the file system, with the same lifecycle as the socket itself.
This has two benefits: first, this allows us to remove /dev/log and
/dev/initctl from /dev, thus leaving only symlinks, device nodes and
directories in the /dev tree. More importantly however, this allows us
to move /dev/log out of /dev, while still making it accessible there, so
that PrivateDevices= can provide /dev/log too.
Previously a cgroup setting down tree would result in cgroup membership
additions being propagated up the tree and to the siblings, however a
unit could never lose cgroup memberships again. With this change we'll
make sure that both cgroup additions and removals propagate properly.
Message handler callbacks can be simplified drastically if the
dispatcher automatically replies to method calls if errors are returned.
Thus: add an sd_bus_error argument to all message handlers. When we
dispatch a message handler and it returns negative or a set sd_bus_error
we send this as message error back to the client. This means errors
returned by handlers by default are given back to clients instead of
rippling all the way up to the event loop, which is desirable to make
things robust.
As a side-effect we can now easily turn the SELinux checks into normal
function calls, since the method call dispatcher will generate the right
error replies automatically now.
Also, make sure we always pass the error structure to all property and
method handlers as last argument to follow the usual style of passing
variables for return values as last argument.
This patch converts PID 1 to libsystemd-bus and thus drops the
dependency on libdbus. The only remaining code using libdbus is a test
case that validates our bus marshalling against libdbus' marshalling,
and this dependency can be turned off.
This patch also adds a couple of things to libsystem-bus, that are
necessary to make the port work:
- Synthesizing of "Disconnected" messages when bus connections are
severed.
- Support for attaching multiple vtables for the same interface on the
same path.
This patch also fixes the SetDefaultTarget() and GetDefaultTarget() bus
calls which used an inappropriate signature.
As a side effect we will now generate PropertiesChanged messages which
carry property contents, rather than just invalidation information.
Slice/ControlGroup only really makes sense for unit types which actually
have cgroups attached to them, hence move them out of the generic Unit
interface and into the specific unit type interfaces.
These fields will continue to be part of Unit though, simply because
things are a log easier that way. However, regardless how this looks
internally we should keep things clean and independent of the specific
implementation of the inside.
Replace the very generic cgroup hookup with a much simpler one. With
this change only the high-level cgroup settings remain, the ability to
set arbitrary cgroup attributes is removed, so is support for adding
units to arbitrary cgroup controllers or setting arbitrary paths for
them (especially paths that are different for the various controllers).
This also introduces a new -.slice root slice, that is the parent of
system.slice and friends. This enables easy admin configuration of
root-level cgrouo properties.
This replaces DeviceDeny= by DevicePolicy=, and implicitly adds in
/dev/null, /dev/zero and friends if DeviceAllow= is used (unless this is
turned off by DevicePolicy=).
Since we already allow defining the mode of AF_UNIX sockets and FIFO, it
makes sense to also allow specific user/group ownership of the socket
file for restricting access.
This adds SMACK label configuration options to socket units.
SMACK labels should be applied to most objects on disk well before
execution time, but two items remain that are generated dynamically
at run time that require SMACK labels to be set in order to enforce
MAC on all objects.
Files on disk can be labelled using package management.
For device nodes, simple udev rules are sufficient to add SMACK labels
at boot/insertion time.
Sockets can be created at run time and systemd does just that for
several services. In order to protect FIFO's and UNIX domain sockets,
we must instruct systemd to apply SMACK labels at runtime.
This patch adds the following options:
Smack - applicable to FIFO's.
SmackIpIn/SmackIpOut - applicable to sockets.
No external dependencies are required to support SMACK, as setting
the labels is done using fsetxattr(). The labels can be set on a
kernel that does not have SMACK enabled either, so there is no need
to #ifdef any of this code out.
For more information about SMACK, please see Documentation/Smack.txt
in the kernel source code.
v3 of this patch changes the config options to be CamelCased.
a) Instead of parsing the bus messages inside of selinux-access.c
simply pass everything pre-parsed in the functions
b) implement the access checking with a macro that resolves to nothing
on non-selinux builds
c) split out the selinux checks into their own sources
selinux-util.[ch]
d) this unifies the job creation code behind the D-Bus calls
Manager.StartUnit() and Unit.Start().
We finally got the OK from all contributors with non-trivial commits to
relicense systemd from GPL2+ to LGPL2.1+.
Some udev bits continue to be GPL2+ for now, but we are looking into
relicensing them too, to allow free copy/paste of all code within
systemd.
The bits that used to be MIT continue to be MIT.
The big benefit of the relicensing is that closed source code may now
link against libsystemd-login.so and friends.
