v2: fix error in free_and_strndup()
When the orignal and copied message were the same, but shorter than specified
length l, memory read past the end of the buffer would be performed. A test
case is included: a string that had an embedded NUL ("q\0") is used to replace
"q".
v3: Fix one more bug in free_and_strndup and add tests.
v4: Some style fixed based on review, one more use of free_and_replace, and
make the tests more comprehensive.
Allows configuring the watchdog signal (with a default of SIGABRT).
This allows an alternative to SIGABRT when coredumps are not desirable.
Appropriate references to SIGABRT or aborting were renamed to reflect
more liberal watchdog signals.
Closes#8658
Let's change utf16_to_utf8() prototype to refer to utf16 chars with char16_t rather than void
Let's not cast away a "const" needlessly.
Let's add a few comments.
Let's fix the calculations of the buffer size to allocate, and how long
to run the loop in case of uneven byte numbers
Let's fix an indentation issue.
Let's avoid yoda comparisons.
Let's drop unnecessary ().
Let's make sure we convert 16bit values to 32bit before shifting them by
10bit to the left, to avoid overflows.
Let's avoid comparisons between signed literals and unsigned variables,
in particular if the literals are outside of the minimum range C
requires for "int".
Let's avoid a few casts in the function. Also, let's drop the "const"
when returning the string, for similar reasons as strchr() and friends
drop it: so that we don't add a const if the user passes in a non-const
string.
Quoting https://github.com/systemd/systemd/issues/10074:
> detect_vm_uml() reads /proc/cpuinfo with read_full_file()
> read_full_file() has a file max limit size of READ_FULL_BYTES_MAX=(4U*1024U*1024U)
> Unfortunately, the size of my /proc/cpuinfo is bigger, approximately:
> echo $(( 4* $(cat /proc/cpuinfo | wc -c)))
> 9918072
> This causes read_full_file() to fail and the Condition test fallout.
Let's just read line by line until we find an intersting line. This also
helps if not running under UML, because we avoid reading as much data.
optind may be used in each verb, e.g., udevadm. So, let's initialize
optind before calling verbs.
Without this, e.g., udevadm -d hwdb --update causes error in parsing arguments.
Both SO_SNDBUFFORCE and SO_RCVBUFFORCE requires capability 'net_admin'.
If this capability is not granted to the service the first attempt to increase
the recv/snd buffers (via sd_notify()) with SO_RCVBUFFORCE/SO_SNDBUFFORCE will
fail, even if the requested size is lower than the limit enforced by the
kernel.
If apparmor is used, the DENIED logs for net_admin will show up. These log
entries are seen as red warning light, because they could indicate that a
program has been hacked and tries to compromise the system.
It would be nicer if they can be avoided without giving services (relying on
sd_notify) net_admin capability or dropping DENIED logs for all such services
via their apparmor profile.
I'm not sure if sd_notify really needs to forcibly increase the buffer sizes,
but at least if the requested size is below the kernel limit, the capability
(hence the log entries) should be avoided.
Hence let's first ask politely for increasing the buffers and only if it fails
then ignore the kernel limit if we have sufficient privileges.
According to RFC2616[1], HTTP header names are case-insensitive. So
it's totally valid to have a header starting with either `Date:` or
`date:`.
However, when systemd-importd pulls an image from an HTTP server, it
parses HTTP headers by comparing header names as-is, without any
conversion. That causes failures when some HTTP servers return headers
with different combinations of upper-/lower-cases.
An example:
https://alpha.release.flatcar-linux.net/amd64-usr/current/flatcar_developer_container.bin.bz2 returns `Etag: "pe89so9oir60"`,
while https://alpha.release.core-os.net/amd64-usr/current/coreos_developer_container.bin.bz2
returns `ETag: "f03372edea9a1e7232e282c346099857"`.
Since systemd-importd expects to see `ETag`, the etag for the Container Linux image
is correctly interpreted as a part of the hidden file name.
However, it cannot parse etag for Flatcar Linux, so the etag the Flatcar Linux image
is not appended to the hidden file name.
```
$ sudo ls -al /var/lib/machines/
-r--r--r-- 1 root root 3303014400 Aug 21 20:07 '.raw-https:\x2f\x2falpha\x2erelease\x2ecore-os\x2enet\x2famd64-usr\x2fcurrent\x2fcoreos_developer_container\x2ebin\x2ebz2.\x22f03372edea9a1e7232e282c346099857\x22.raw'
-r--r--r-- 1 root root 3303014400 Aug 17 06:15 '.raw-https:\x2f\x2falpha\x2erelease\x2eflatcar-linux\x2enet\x2famd64-usr\x2fcurrent\x2fflatcar_developer_container\x2ebin\x2ebz2.raw'
```
As a result, when the Flatcar image is removed and downloaded again,
systemd-importd is not able to determine if the file has been already
downloaded, so it always download it again. Then it fails to rename it
to an expected name, because there's already a hidden file.
To fix this issue, let's introduce a new helper function
`memory_startswith_no_case()`, which compares memory regions in a
case-insensitive way. Use this function in `curl_header_strdup()`.
See also https://github.com/kinvolk/kube-spawn/issues/304
[1]: https://www.w3.org/Protocols/rfc2616/rfc2616-sec4.html#sec4.2
This work add support to generic netlink to sd-netlink.
See https://lwn.net/Articles/208755/
networkd: add support FooOverUDP support to IPIP tunnel netdev
https://lwn.net/Articles/614348/
Example conf:
/lib/systemd/network/1-fou-tunnel.netdev
```
[NetDev]
Name=fou-tun
Kind=fou
[FooOverUDP]
Port=5555
Protocol=4
```
/lib/systemd/network/ipip-tunnel.netdev
```
[NetDev]
Name=ipip-tun
Kind=ipip
[Tunnel]
Independent=true
Local=10.65.208.212
Remote=10.65.208.211
FooOverUDP=true
FOUDestinationPort=5555
```
$ ip -d link show ipip-tun
```
5: ipip-tun@NONE: <POINTOPOINT,NOARP> mtu 1472 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ipip 10.65.208.212 peer 10.65.208.211 promiscuity 0
ipip remote 10.65.208.211 local 10.65.208.212 ttl inherit pmtudisc encap fou encap-sport auto encap-dport 5555 noencap-csum noencap-csum6 noencap-remcsum numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535
```
Pretty much all intel cpus have had RDRAND in a long time. While
CPU-internal RNG are widely not trusted, for seeding hash tables it's
perfectly OK to use: we don't high quality entropy in that case, hence
let's use it.
This is only hooked up with 'high_quality_required' is false. If we
require high quality entropy the kernel is the only source we should
use.
Let's fold get_user_creds_clean() into get_user_creds(), and introduce a
flags argument for it to select "clean" behaviour. This flags parameter
also learns to other new flags:
- USER_CREDS_SYNTHESIZE_FALLBACK: in this mode the user records for
root/nobody are only synthesized as fallback. Normally, the synthesized
records take precedence over what is in the user database. With this
flag set this is reversed, and the user database takes precedence, and
the synthesized records are only used if they are missing there. This
flag should be set in cases where doing NSS is deemed safe, and where
there's interest in knowing the correct shell, for example if the
admin changed root's shell to zsh or suchlike.
- USER_CREDS_ALLOW_MISSING: if set, and a UID/GID is specified by
numeric value, and there's no user/group record for it accept it
anyway. This allows us to fix#9767
This then also ports all users to set the most appropriate flags.
Fixes: #9767
[zj: remove one isempty() call]
This is a bit like the info link in most of GNU's --help texts, but we
don't do info but man pages, and we make them properly clickable on
terminal supporting that, because awesome.
I think it's generally advisable to link up our (brief) --help texts and
our (more comprehensive) man pages a bit, so this should be an easy and
straight-forward way to do it.
