This will launch $(PYTHON) with $LD_LIBRARY_PATH and $PYTHONPATH
as ./configure-d and DESTDIR-ed. Use as:
make install DESTDIR=/var/tmp/inst python-shell
Previous commit (20d408766) was broken. The problem is not connected
to DESTDIR being set or not, but to the fact that targets in
$GENERAL_ALIASES have directory components, so mkdir -p wasn't
recursing deep enough.
grawity> ln: failed to create symbolic link
‘/home/grawity/pkg/aur/systemd-git/pkg/systemd//etc/systemd/system/multi-user.target.wants/remote-fs.target’: No such file or directory
A new config file /etc/systemd/sleep.conf is added.
It is parsed by systemd-sleep and logind. The strings written
to /sys/power/disk and /sys/power/state can be configured.
This allows people to use different modes of suspend on
systems with broken or special hardware.
Configuration is shared between systemd-sleep and logind
to enable logind to answer the question "can the system be
put to sleep" as correctly as possible without actually
invoking the action. If the user configured systemd-sleep
to only use 'freeze', but current kernel does not support it,
logind will properly report that the system cannot be put
to sleep.
https://bugs.freedesktop.org/show_bug.cgi?id=57793https://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=commit;h=7e73c5ae6e7991a6c01f6d096ff8afaef4458c36http://lists.freedesktop.org/archives/systemd-devel/2013-February/009238.html
SYSTEM_CONFIG_FILE and USER_CONFIG_FILE defines were removed
since they were used in only a few places and with the
addition of /etc/systemd/sleep.conf it becomes easier to just
append the name of each file to the dir name.
Do the depmod in the kernel-install hooks, so hooks can produce/install
kernel modules and be part of the depmod.
Also move the basic boot loader entry creation and removal to a
plugin script.
If PRETTY_NAME is not defined in /etc/os-release, fallback to
PRETTY_NAME="Linux $KERNEL_VERSION".
Add documentation for everything in the man page.
When rsyncing to fd.o, rsync would fail on symlinks in man/.
We don't care about the times too much anyway. rsync will
set times to "now", which is fine, since modification times
don't matter much outside of each uploader's machine anyway.
The point is to complete all steps of the transfer, so Python
documentation is properly updated.
The same old story as d3b9e0ff: those two use libsystemd-shared, and
in turn, some functions in libsystemd-shared use libsystemd-daemon.
The fact that *those* functions are used neither by the python modules
in question nor pam_systemd isn't always enough. Currently, I'm seeing
linking failures with -flto. The result of adding
libsystemd-daemon-internal to the list of linked libraries should be
harmless, with no change in size or final link requirements.
libsystemd-audit needs functions from libsystemd-shared, so
libsystemd-audit needs to appear first. Otherwise:
CCLD systemd-logind
./.libs/libsystemd-audit.a(audit.o): In function `audit_session_from_pid':
/home/josh/src/systemd/src/shared/audit.c:50: undefined reference to `detect_container'
This patch adds --disable-tests to configure. It is based on a patch
posted by Thierry Reding in 2010. The motivation for adding it is that
some tests fail link-time when cross-compiling.
The patch adds a new Makefile variable -- manual_tests -- and uses
that instead of noinst_PROGRAMS. However, if ENABLE_TESTS is true,
the former is added to the latter. It also renames noinst_tests to
simply tests.
This bit of code is mostly stolen from coredump.c. We construct
a simple journal message and append the bootchart file in the
journal automatically.
You can extract the latest bootchart from the current boot with
something like:
$ journalctl -b MESSAGE_ID=9f26aa562cf440c2b16c773d0479b518 --field=BOOTCHART
which prints it to stdout.
None of the other logic is touched. The journal entry is created
even if bootchart was run manually, which is probably wrong.
Since v183, the contents of /usr/lib/udev/devices is no longer copied to /dev
on boot, rather systemd-tmpfiles should be used instead. However, as
systemd-tmpfiles --create is only ran long after udevd has been started, it is
no longer possible to use udev rules to assign permissions to the static nodes.
This calls systemd-tmpfiles --create early, before udev is started, and
restricts the call to /dev, which is known to be mounted already.
In the future, this could also take over the creation of static device nodes
from systemd-udevd.
georgem> libsystemd-id128.so: undefined reference to `sd_listen_fds'
In some toolchains (--as-needed not used or not working), the
toolchain doesn't drop this dependency. It is introduced because
sd-id128.so is linked against sd-shared.la, and some functions therein
use libsystemd-daemon, but libsd-id128 doesn't use any of those
functions.
This results in no change in libsystemd-id128.so when the unused
symbols are properly stripped.
Implement this with a proper state machine, so that newlines and
escaped chars can appear in string assignments. This should bring the
parser much closer to shell.
Since journal-gatewayd is now running unprivileged, and detecting
virtalization requires privileges, query PID1 via D-Bus for the used
virtualization.
This is also the first time we use libsystemd-bus for more than just
testing.
https://bugs.freedesktop.org/show_bug.cgi?id=62173
This makes it easier to add substitutions to man pages,
avoiding the separate transformation step.
mkdir -p's are removed from the rule, because xsltproc will
will create directories on it's own.
All in all, two or three forks per man page are avoided,
which should make things marginally faster.
Unfortunately python parsers must too be tweaked to handle
entities. This isn't particularly easy: with lxml a custom
Resolver can be used, but the stdlib etree doesn't support
external entities *at all*. So when running without lxml,
the entities are just removed. Right now it doesn't matter,
since the entities are not indexed anyway. But I intend to
add indexing of filenames in the near future, and then the
index generated without lxml might be missing a few lines.
Oh well.
In order to write tests for the catalog functions, they
are made non-static and start taking a 'database' parameter,
which is the name of a file with the preprocessed catalog
entries.
This makes it possible to make test-catalog part of the
normal test suite, since it now only operates on files
in /tmp.
Some more tests are added.
Readahead has all sorts of bad side effects depending on your
storage media. On rotating disks, it may be degrading startup
performance if enough requests are queued spanning linearly
over all blocks early at boot, and mount, blkid and friends
want to insert reads to the start of these block devices after.
The end result is that on spinning disks with ext3/4 that udev
and mounts take a very long time, and nothing really happens until
readahead is completely finished.
This has the net effect that the CPU is almost entirely idle
for the entire period that readahead is working. We could have
finished starting up quite a lot of services in this time if
we were smarter at how we do readahead.
This patch sorts all requests into 2 second "chunks" and sub-sorts
each chunk by block. This adds a single cross-drive seek per "chunk"
but has the benefit that we will have a lot of the blocks we need
early on in the boot sequence loaded into memory faster.
For a comparison of how before/after bootcharts look (ext4 on a
mobile 5400rpm 250GB drive) please look at:
http://foo-projects.org/~sofar/blocked-tests/
There are bootcharts in the "before" and "after" folders where you
should be able to see that many low-level services finish 5-7
seconds earlier with the patch applied (after).
With the conversion from pci-db + usb-db to hwdb, the property
got accitentially renamed.
Move the name back to the long established identifier *MODEL*
instead of *PRODUCT*.
$ git grep -l ID_MODEL_FROM_DATABASE
hwdb/20-pci-vendor-model.hwdb
hwdb/20-usb-vendor-model.hwdb
hwdb/ids-update.pl
man/systemd.device.xml
rules/78-sound-card.rules
src/core/device.c
src/cryptsetup/cryptsetup.c
Please see the documentation (e.g. pydoc3 systemd.daemon) for full
description. As usual, systemd._daemon wraps the raw interface, while
systemd.daemon provides the more pythonic API. sd_listen_fds,
sd_booted, sd_is_fifo, sd_is_socket, sd_is_socket_unix,
sd_is_socket_inet, sd_is_mq, and SD_LISTEN_FDS_START are currently
wrapped.
First, rename root-fs.target to initrd-root-fs.target to clarify its usage.
Mount units with "x-initrd-rootfs.mount" are now ordered before
initrd-root-fs.target. As we sometimes construct /sysroot mounts in
/etc/fstab in the initrd, we want these to be mounted before the
initrd-root-fs.target is active.
initrd.target can be the default target in the initrd.
(normal startup)
:
:
v
basic.target
|
______________________/|
/ |
| sysroot.mount
| |
| v
| initrd-root-fs.target
| |
| v
| initrd-parse-etc.service
(custom initrd services) |
| v
| (sysroot-usr.mount and
| various mounts marked
| with fstab option
| x-initrd.mount)
| |
| v
| initrd-fs.target
| |
\______________________ |
\|
v
initrd.target
|
v
initrd-cleanup.service
isolates to
initrd-switch-root.target
|
v
______________________/|
/ |
| initrd-udevadm-cleanup-db.service
| |
(custom initrd services) |
| |
\______________________ |
\|
v
initrd-switch-root.target
|
v
initrd-switch-root.service
|
v
switch-root
https://bugs.freedesktop.org/show_bug.cgi?id=62085
/usr/lib/gcc/x86_64-pc-linux-gnu/4.6.3/../../../../lib64/libsystemd-login.so:
undefined reference to `sd_listen_fds'
In ee465038ce 'build-sys: break dependency loop between
libsystemd-id128.la and -shared.la', a partial fix was applied, and
the use of functions from libsystemd-id128 was removed from
libsystemd-shared. Nevertheless, fdset.c was still using sd_listen_fds,
so libsystemd-login should be linked against libysystemd-daemon
or libsystemd-daemon-internal.
Tested-by: Elias Probst <mail@eliasprobst.eu>
Instead of using local-fs*.target in the initrd, use root-fs.target for
sysroot.mount and initrd-fs.target for /sysroot/usr and friends.
Using local-fs.target would mean to carry over the activated
local-fs.target to the isolated initrd-switch-root.target and thus in
the real root. Having local-fs.target already active after
deserialization causes ordering problems with the real root services and
targets.
We better isolate to targets for initrd-switch-root.target, which are
only available in the initrd.
This should help readers of the man or HTML pages know if the documentation
is out of date. An alternative to use a date generated from 'git log' was
considered, but since we try to keep user visible documentation up to date,
showing the project version should be enough.
Let's update bootchar to share the coding style a bit more with the rest
of the package.
- Some tabs/spaces fixes
- add #pragma to header
- split up header so that we have a 1:1 relation between .c and .h files
like everywhere else
- Prefix user command line arguments/configuration settings with "arg_".
- other coding style fixes
SMACK is the Simple Mandatory Access Control Kernel, a minimal
approach to Access Control implemented as a kernel LSM.
The kernel exposes the smackfs filesystem API through which access
rules can be loaded. At boot time, we want to load the access rules
as early as possible to ensure all early boot steps are checked by Smack.
This patch mounts smackfs at the new location at /sys/fs/smackfs for
kernels 3.8 and above. The /smack mountpoint is not supported.
After mounting smackfs, rules are loaded from the usual location.
For more information about Smack see:
http://www.kernel.org/doc/Documentation/security/Smack.txt
Since sd_journal_reliable_fd wasn't exported before, it is as if
it was added now. Library "current" number must be bumped.
michich> Someone links with the fixed version and produces a RPM with
his program. The RPM will happily install on a system with an
old systemd version (the deps will appear fine), but the
program will fail to run.
Previously all journal files were owned by "adm". In order to allow
specific users to read the journal files without granting it access to
the full "adm" powers, introduce a new specific group for this.
"systemd-journal" has to be created by the packaging scripts manually at
installation time. It's a good idea to assign a static UID/GID to this
group, since /var/log/journal might be shared across machines via NFS.
This commit also grants read access to the journal files by default to
members of the "wheel" and "adm" groups via file system ACLs, since
these "almost-root" groups should be able to see what's going on on the
system. These ACLs are created by "make install". Packagers probably
need to duplicate this logic in their postinst scripts.
This also adds documentation how to grant access to the journal to
additional users or groups via fs ACLs.
Split the large bash completion script into separate, smaller files each
named after the binary it is used for and move the files to
/usr/share/bash-completion/completions. This way the completions can be
loaded on demand and we only install the completions for the tools we
actually build. The old path /etc/bash_completion.d/ is deprecated and
will disappear in the future.
This will:
* mount all configured filesystems (typically the rootfs on /sysroot)
* reload the configuration to pick up anything from the mounted fs (typically
/sysroot/etc/fstab)
* mount any newly configured filesystems (typically /usr on /sysroot/usr, if
applicable)
* shut-down and clean-up any daemons running in the initramfs (typically udevd)
* switch-root to /sysroot and start the real init
For an example of what files should be included in an initramfs based on this
see
<https://mailman.archlinux.org/pipermail/arch-projects/2013-February/003628.html>.
Cc: Harald Hoyer <harald.hoyer@gmail.com>
Cc: Dave Reisner <d@falconindy.com>
* python-systemd-reader:
python-systemd: rename Journal to Reader
build-sys: upload python documentation to freedesktop.org
systemd-python: add Journal class for reading journal
python: build html docs using sphinx
journalct: also print Python code in --new-id
python: utilize uuid.UUID in logging
python: add systemd.id128 module
... and 34 other commits
In short: python module systemd.id128 is added, and existing
systemd.journal gains a new class systemd.journal.Reader, which can be
used to iterate over journal entries. Documentation is provided, and
accessible under e.g.
pydoc3 systemd.journal.Reader
or
firefox http://www.freedesktop.org/software/systemd/man/python-systemd/
__REALTIME_TIMESTAMP and __MONOTONIC_TIMESTAMP return ints.
It doesn't make sense to convert to string, just to convert
back to a number later on.
Also try to follow systemd rules for indentation.
This introduces a new static list of known attributes and their special
semantics. This means that cgroup attribute values can now be
automatically translated from user to kernel notation for command line
set settings, too.
This also adds proper support for multi-line attributes.
This doesn't need to be passed, as it's handled by libtool. Since the
default for autoconf is --disable-static, this change is effectively a
noop. It only matters if you pass --enable-static, in which case the
static libs for systemd libraries will actually be built.
Nitpicky, but this only affects systemd libs. The override for the
other libs remains since these libs are always loaded dynamically and
never compiled staticly.
Written by Peeters Simon <peeters.simon@gmail.com>.
Makefile stuff and cleaned up a bit by Auke Kok <auke-jan.h.kok@intel.com>.
Some code inspired by Marc-Antoine Perennou <Marc-Antoine@Perennou.com>.
Now, actually check if the environment variable names and values used
are valid, before accepting them. With this in place are at some places
more rigid than POSIX, and less rigid at others. For example, this code
allows lower-case environment variables (which POSIX suggests not to
use), but it will not allow non-UTF8 variable values.
All in all this should be a good middle ground of what to allow and what
not to allow as environment variables.
(This also splits out all environment related calls into env-util.[ch])
After d848b9cbfa 'Move generic specifier functions to shared' libudev
depends (through) libsystemd-shared.la on libsystemd-id128.so. The
problem only appears when the linker does not support --gc-sections
and manifests itself as the inability to resolve sd_id128_get_machine
and other libsystemd-id128 functions, which aren't really used.
In other cases where multiple directories are searched for unit files,
the list of directories is described in the man page describing the
format. I think this makes sense too in case of systemd directories,
since the systemd(1) manpage already has an overview of many different
topics.
man rules were repeating the same information in too many places,
which was error prone. Those rules can be easily generated from .xml
files. For efficiency and because python is not a required dependency,
Makefile-man.am is only regenerated when requested with
make update-man-list
If no metadata in man/*.xml changed, this file should not change. So
only when a new man page or a new alias is added, this file should
show up in 'git diff'. The change should then be committed.
If the support for building from git without python was dropped, we
could drop Makefile-man.am from version control. This would also
increase the partial build time (since more stuff would be rebuild
whenever sources in man/*.xml would be modified), so it would probably
wouldn't be worth it.
adds test of:
strv_find
strv_find_prefix
strv_overlap
strv_sort
streq_ptr
first_word
Splits tests of util.c into own file to avoid clutter as we add more.
Removed a few prints and uses _cleanup_free_ to make the tests more focused.
Sometimes it is useful to look at them, and they don't take
up any significant amount of space. Keeping them also avoids
the message about files being removed at the end of make
run.
This allows one templated unit to refer to another templated unit
at installation time.
Examples:
> grep WantedBy ~/.config/systemd/user/mpop@.timer
WantedBy=services@%i.target
> srv disable mpop@iit.timer
rm '/home/alxchk/.config/systemd/user/services@iit.target.wants/mpop@iit.timer'
> srv enable mpop@iit.timer
ln -s '/home/alxchk/.config/systemd/user/mpop@.timer' '/home/alxchk/.config/systemd/user/services@iit.target.wants/mpop@iit.timer'
Based-on-patch-by: Oleksii Shevchuk <alxchk@gmail.com>
New sections are added: PAM options, crypttab options, commandline
options, miscellaneous. The last category will be used for all
untagged <varname> elements.
Commandline options sections is meant to be a developer tool: when
adding an option it is sometimes useful to be able to check if
similarly named options exist elsewhere.
Based-on-patch-by: Thomas Jarosch <thomas.jarosch@intra2net.com>
cppcheck reported:
[src/bootchart/svg.c:791]: (error) Mismatching allocation and deallocation: f
The idea is to make Makefile.am more declarative and avoid
repetitions. Redeclaring unit links as variables also makes
it easier to conditionally install only some of them.
In the x32 ABI, syscall numbers start at 0x40000000. Mask that bit on
x32 for lookups in the syscall_names array and syscall_filter and ensure
that syscall.h is parsed correctly.
[zj: added SYSCALL_TO_INDEX, INDEX_TO_SYSCALL macros.]
This allows us to print simple performance data of all parts of the boot now:
- firmware
- boot loader
- kernel
- initrd
- userspace
This only works for bootloaders which support passing TSC data via EFI
variables. As of now that's only gummiboot.
We no longer allow early-boot init scripts, however in late boot the
syslog socket and local mounts are established anyway, so let's simplify
our dep graph a bit.
If $syslog doesn't resolve to syslog.target anymore there's no reason to
keep syslog.target around anymore. Let's remove it.
Note that many 3rd party service unit files order themselves after
syslog.target. These will be dangling dependencies now, which should be
unproblematic, however.
New file output.h with output flags and modes.
--full parameter also for cgls and loginctl.
Include 'all' parameter in flags (show_cgroup_by_path, show_cgroup,
show_cgroup_and_extra, show_cgroup_and_extra_by_spec).
get_process_cmdline with max_length == 0 will not ellipsize output.
Replace LINE_MAX with 0 in some calls of get_process_cmdline.
[zj: Default to --full when under pager for clgs.
Drop '-f' since it wasn't documented and didn't actually work.
Reindent a bit.
]
Systemd should not introduce any new facilities. Distributions which still
need to support their non-standard/legacy facilities should add them as
patches to their packaging.
The following facilities are no longer recognized:
$x-display-manager
$mail-transfer-agent
$mail-transport-agent
$mail-transfer-agent
$smtp
$null
This target is no longer available:
mail-transfer-agent.target
This way we also get a man page. The output is not as polished.
I hope that it doesn't matter too much.
index.html is not generated now, the page is called
systemd.index.html. If necessary, an install hook should be added.
Bootchart is renamed to 'systemd-bootchart' and installed as
/usr/lib/systemd/systemd-bootchart. The configuration file
will reside in /etc/systemd/bootchart.conf.
Define KEEP_LA_FILES to keep them.
The hook is repeated because both install-exec-hook and
install-data-hook can install libraries and with parallel make
it's not possible to predict which one will run first.
http://lists.freedesktop.org/archives/systemd-devel/2013-January/008016.html
tl;dr: Libtool .la files are not very useful for linking linux
libraries.
Note that there are still some rome for cleanups. In particular,
the .la files are now installed, which we probably don't want; and
some of the macros in Makefile.am are likely redundan.
The variable assignment operator was introduced in make 3.82 and thus
breaks "make install" with older versions of make. Since "=" is optional
in make 3.82 it is safe to drop.
Python binary used in the she-bang line in installed
scripts can be set with ./configure PYTHON_BINARY=...
Defaults to the same path as python used during compilation.
Adding --version makes systemd-analyze behave consistently with the
rest of installed programs.
The lines in ./configure output are reordered to keep all yes/no lines
separate. I think that this makes the output clearer.
This also drops automatic selection of the rc local scripts
based on the local distro. Distributions now should specify the paths
of the rc-local and halt-local scripts on the configure command line.
Commit f934051c4d broke the build
because it made libsystemd-shared call sd_listen_fds() which is
defined in libsystemd-daemon.
This is a bit of a contortion because libsystemd-shared.la is a
noinst_LTLIBRARY, but libtool should do the right thing here and emit
DT_NEEDED on libsystemd-daemon.so for things that consume
libsystemd-shared.la.
The individual address block is a poor man's organizationally unique
identifier.
Perhaps we should change the udev key from ID_OUI_FROM_DATABASE to
something like ID_IEEE_VENDOR_FROM_DATABASE?
Suggested-by: Diego Elio Pettenò <flameeyes@flameeyes.eu>
This saves test output to individual .log files.
The driver is only used in /Makefile.am, not in
/docs/*udev/Makefile.am because the latter don't seem to work with
this driver. They don't produce much output anyway.
.gitignore is alphabetized, and .log files are added to it.
Generated files from /build-aux are removed from the list.
Currently, keymaps are provided only for the NP90X3A laptop. Samsung
introduced updated models, codenamed 900X3B, 900X3C, 900X4B, 900X4C,
which are currently not matched by udev rules. This patch includes the
newer modules in udev rules and move the samsung-n90x3a file defining
keys to a more generic samsung-series-9 file.
The patch was tested on a 900X4C laptop, and other people reported
that the rules also work for 900X3B and 900X3C ones.
TARGET_UBUNTU is effectively the same as TARGET_DEBIAN. Given the Ubuntu
is unlikely to use systemd anytime soon there's no point in keeping this
separate.
Distcheck would fail due to sysvinit dir being set,
but not sysvrcnd dir:
# ./configure --enable-gtk-doc --with-sysvrcd-path=/etc/rc.d
# --with-sysvinit-path=/etc/rc.d
# make distcheck
...
configure: error: *** You need both --with-sysvinit-path=PATH and
--with-sysvrcd-path=PATH to enable SysV compatibility support, or both
empty to disable it.
make: *** [distcheck] Error 1
This also allows sysvcompat support to be disabled from distcheck.
> Kay:
udev is early boot without /var. /var is entirely taboo for udev.
This partially reverts commit ee623f0d0c
(moving hwdb.bin is reverted, but the uninstall hook and cosmetic
changes remain).
The path doesn't change in the standard configuration.
Also, give full path to the journalctl binary in the hook,
since it might be installed outside of $PATH.
Also, add uninstall hook to remove the binary catalog.
More specifically this adds a number of macros that resolve to
directories for udev rules, hwdb entries, tmpfiles and sysctl.
Thsi also includes three new macros for rebuilding the hwbd/catalog
index when a package drops in new files
The hook would fail if preexisting journalctl doesn't support
--update-catalog. Also, the catalog would be updated before new
catalog files were installed. Both issues are fixed by moving to
INSTALL_DATA_HOOK instead of INSTALL_EXEC_HOOK, since the hook is now
executed after both journalctl and catalog files are installed.
I'm building systemd for an embedded system and we would prefer not having
to include the entire util-linux package just to get a libblkid whose
functionality we don't need.
The message catalog can be used to attach short help texts to log lines,
keyed by their MESSAGE_ID= fields. This is useful to help the
administrator understand the context and cause of a message, find
possible solutions and find further related documentation.
Since this is keyed off MESSAGE_ID= this will only work for native
journal messages.
The message catalog supports i18n, and is useful to augment english
language system messages with explanations in the local language.
This commit only includes short explanatory messages for a few example
message IDs, we'll add more complete documentation for the relevant
systemd messages later on.
A service that only sets the scheduling policy to round-robin
fails to be started. This is because the cpu_sched_priority is
initialized to 0 and is not adjusted when the policy is changed.
Clamp the cpu_sched_priority when the scheduler policy is set. Use
the current policy to validate the new priority.
Change the manual page to state that the given range only applies
to the real-time scheduling policies.
Add a testcase that verifies this change:
$ make test-sched-prio; ./test-sched-prio
[test/sched_idle_bad.service:6] CPU scheduling priority is out of range, ignoring: 1
[test/sched_rr_bad.service:7] CPU scheduling priority is out of range, ignoring: 0
[test/sched_rr_bad.service:8] CPU scheduling priority is out of range, ignoring: 100
The point is to allow the use of journald functions by other binaries.
Before, journald code was split into multiple files (journald-*.[ch]),
but all those files all required functions from journald.c. And
journald.c has its own main(). Now, it is possible to link against
those functions, e.g. from test binaries.
This constitutes a fix for https://bugzilla.redhat.com/show_bug.cgi?id=872638.
The patch does the following:
1. rename journald.h to journald-server.h and move corresponding code
to journald-server.c.
2. add journald-server.c and other journald-*.c parts to
libsystemd-journal-internal.
3. remove journald-syslog.c from test_journal_syslog_SOURCES, since
it is now contained in libsystemd-journal-internal.
There are no code changes, apart from the removal of a few static's,
to allow function calls between files.
This was premarily intended to support the LSB facility $httpd which is
only known by Fedora, and a bad idea since it lacks any real-life
usecase.
Similar, drop support for some other old Fedora-specific facilities.
Also, document the rules for introduction of new facilities, to clarify
the situation for the future.
Network file systems generally do not offer inotify() that would work
across the network. We hence cannot rely on inotify() exclusiely in
those case. Provide an API to determine these cases, and suggest doing
manual regular rechecks.
Note that this is not complete yet, as we need to rescan journal dirs on
network file systems explicitly to find new/removed files
When traversing entry array chains for a bisection or for retrieving an
item by index we previously always started at the beginning of the
chain. Since we tend to look at the same chains repeatedly, let's cache
where we have been the last time, and maybe we can skip ahead with this
the next time.
This turns most bisections and index lookups from O(log(n)*log(n)) into
O(log(n)). More importantly however, we seek around on disk much less,
which is good to reduce buffer cache and seek times on rotational disks.
