glibc/sysdeps/pthread/tst-cancel15.c

138 lines
2.8 KiB
C
Raw Permalink Normal View History

nptl: Fix sem_wait and sem_timedwait cancellation (BZ#18243) This patch fixes both sem_wait and sem_timedwait cancellation point for uncontended case. In this scenario only atomics are involved and thus the futex cancellable call is not issue and a pending cancellation signal is not handled. The fix is straighforward by calling pthread_testcancel is both function start. Although it would be simpler to call CANCELLATION_P directly, I decided to add an internal pthread_testcancel alias and use it to export less internal implementation on such function. A possible change on how pthread_testcancel is internally implemented would lead to either continue to force use CANCELLATION_P or to adjust its every use. GLIBC testcase also does have tests for uncontended cases, test-cancel12 and test-cancel14.c, however both are flawed by adding another cancellation point just after thread pthread_cleanup_pop: 47 static void * 48 tf (void *arg) 49 { 50 pthread_cleanup_push (cleanup, NULL); 51 52 int e = pthread_barrier_wait (&bar); 53 if (e != 0 && e != PTHREAD_BARRIER_SERIAL_THREAD) 54 { 55 puts ("tf: 1st barrier_wait failed"); 56 exit (1); 57 } 58 59 /* This call should block and be cancelable. */ 60 sem_wait (&sem); 61 62 pthread_cleanup_pop (0); 63 64 puts ("sem_wait returned"); 65 66 return NULL; 67 } So sem_{timed}wait does not act on cancellation, pthread_cleanup_pop executes 'cleanup' and then 'puts' acts on cancellation. Since pthread_cleanup_pop removed the clean-up handler, it will ran only once and thus it won't accuse an error to indicate sem_wait has not acted on the cancellation signal. This patch also fixes this behavior by removing the cancellation point 'puts'. It also adds some cleanup on all sem_{timed}wait cancel tests. It partially fixes BZ #18243. Checked on x86_64. [BZ #18243] * nptl/pthreadP.h (__pthread_testcancel): Add prototype and hidden_proto. * nptl/pthread_testcancel.c (pthread_cancel): Add internal aliais definition. * nptl/sem_timedwait.c (sem_timedwait): Add cancellation check for uncontended case. * nptl/sem_wait.c (__new_sem_wait): Likewise. * nptl/tst-cancel12.c (cleanup): Remove wrong cancellation point. (tf): Fix check for uncontended case. (do_test): Likewise. * nptl/tst-cancel13.c (cleanup): Remove wrong cancellation point. (tf): Fix check for uncontended case. (do_test): Likewise. * nptl/tst-cancel14.c (cleanup): Remove wrong cancellation point. (tf): Fix check for uncontended case. (do_test): Likewise. * nptl/tst-cancel15.c (cleanup): Remove wrong cancellation point. (tf): Fix check for uncontended case. (do_test): Likewise.
2016-08-22 14:39:46 +02:00
/* Test sem_timedwait cancellation for contended case.
Copyright (C) 2003-2022 Free Software Foundation, Inc.
Update. 2003-06-07 Ulrich Drepper <drepper@redhat.com> * cleanup_routine.c: New file. * Versions (libpthread) [GLIBC_2.3.3]: Add __pthread_cleanup_routine. * sysdeps/pthread/pthread.h: Add support for fully exception-based cleanup handling. * Makefile (libpthread-routines): Add cleanup_routine. Add more CFLAGS variables to compile with exceptions. Add comments why which file needs unwind tables. (tests) [have-forced-unwind==yes]: Add tst-cancelx* and tst-cleanupx* tests. * tst-cancelx1.c: New file. * tst-cancelx2.c: New file. * tst-cancelx3.c: New file. * tst-cancelx4.c: New file. * tst-cancelx5.c: New file. * tst-cancelx6.c: New file. * tst-cancelx7.c: New file. * tst-cancelx8.c: New file. * tst-cancelx9.c: New file. * tst-cancelx10.c: New file. * tst-cancelx11.c: New file. * tst-cancelx12.c: New file. * tst-cancelx13.c: New file. * tst-cancelx14.c: New file. * tst-cancelx15.c: New file. * tst-cleanupx0.c: New file. * tst-cleanupx0.expect: New file. * tst-cleanupx1.c: New file. * tst-cleanupx2.c: New file. * tst-cleanupx3.c: New file. * tst-cleanup0.c: Make standard compliant. * tst-cleanup1.c: Likewise. * sysdeps/unix/sysv/linux/sem_timedwait.c: Add cancellation support. * sysdeps/unix/sysv/linux/sem_wait.c: Likewise. * sysdeps/unix/sysv/linux/i386/i486/sem_timedwait.S: Likewise. * sysdeps/unix/sysv/linux/i386/i486/sem_wait.S: Likewise. * sysdeps/unix/sysv/linux/x86_64/sem_timedwait.S: Likewise. * sysdeps/unix/sysv/linux/x86_64/sem_wait.S: Likewise. * sysdeps/i386/tcb-offsets.sym: Add RESULT, CANCELHANDLING, and CLEANUP_JMP_BUF. * sysdeps/x86_64/tcb-offsets.sym: Likewise. * tst-cancel12.c: New file. * tst-cancel13.c: New file. * tst-cancel14.c: New file. * tst-cancel15.c: New file. * Makefile (tests): Add tst-cancel12, tst-cancel13, tst-cancel14, and tst-cancel15. * tst-cancel1.c: Add some comments. * sysdeps/unix/sysv/linux/x86_64/sem_timedwait.S: Compute relative timeout correctly.
2003-06-08 07:28:14 +02:00
This file is part of the GNU C Library.
The GNU C Library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
The GNU C Library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public
License along with the GNU C Library; if not, see
Prefer https to http for gnu.org and fsf.org URLs Also, change sources.redhat.com to sourceware.org. This patch was automatically generated by running the following shell script, which uses GNU sed, and which avoids modifying files imported from upstream: sed -ri ' s,(http|ftp)(://(.*\.)?(gnu|fsf|sourceware)\.org($|[^.]|\.[^a-z])),https\2,g s,(http|ftp)(://(.*\.)?)sources\.redhat\.com($|[^.]|\.[^a-z]),https\2sourceware.org\4,g ' \ $(find $(git ls-files) -prune -type f \ ! -name '*.po' \ ! -name 'ChangeLog*' \ ! -path COPYING ! -path COPYING.LIB \ ! -path manual/fdl-1.3.texi ! -path manual/lgpl-2.1.texi \ ! -path manual/texinfo.tex ! -path scripts/config.guess \ ! -path scripts/config.sub ! -path scripts/install-sh \ ! -path scripts/mkinstalldirs ! -path scripts/move-if-change \ ! -path INSTALL ! -path locale/programs/charmap-kw.h \ ! -path po/libc.pot ! -path sysdeps/gnu/errlist.c \ ! '(' -name configure \ -execdir test -f configure.ac -o -f configure.in ';' ')' \ ! '(' -name preconfigure \ -execdir test -f preconfigure.ac ';' ')' \ -print) and then by running 'make dist-prepare' to regenerate files built from the altered files, and then executing the following to cleanup: chmod a+x sysdeps/unix/sysv/linux/riscv/configure # Omit irrelevant whitespace and comment-only changes, # perhaps from a slightly-different Autoconf version. git checkout -f \ sysdeps/csky/configure \ sysdeps/hppa/configure \ sysdeps/riscv/configure \ sysdeps/unix/sysv/linux/csky/configure # Omit changes that caused a pre-commit check to fail like this: # remote: *** error: sysdeps/powerpc/powerpc64/ppc-mcount.S: trailing lines git checkout -f \ sysdeps/powerpc/powerpc64/ppc-mcount.S \ sysdeps/unix/sysv/linux/s390/s390-64/syscall.S # Omit change that caused a pre-commit check to fail like this: # remote: *** error: sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S: last line does not end in newline git checkout -f sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S
2019-09-07 07:40:42 +02:00
<https://www.gnu.org/licenses/>. */
Update. 2003-06-07 Ulrich Drepper <drepper@redhat.com> * cleanup_routine.c: New file. * Versions (libpthread) [GLIBC_2.3.3]: Add __pthread_cleanup_routine. * sysdeps/pthread/pthread.h: Add support for fully exception-based cleanup handling. * Makefile (libpthread-routines): Add cleanup_routine. Add more CFLAGS variables to compile with exceptions. Add comments why which file needs unwind tables. (tests) [have-forced-unwind==yes]: Add tst-cancelx* and tst-cleanupx* tests. * tst-cancelx1.c: New file. * tst-cancelx2.c: New file. * tst-cancelx3.c: New file. * tst-cancelx4.c: New file. * tst-cancelx5.c: New file. * tst-cancelx6.c: New file. * tst-cancelx7.c: New file. * tst-cancelx8.c: New file. * tst-cancelx9.c: New file. * tst-cancelx10.c: New file. * tst-cancelx11.c: New file. * tst-cancelx12.c: New file. * tst-cancelx13.c: New file. * tst-cancelx14.c: New file. * tst-cancelx15.c: New file. * tst-cleanupx0.c: New file. * tst-cleanupx0.expect: New file. * tst-cleanupx1.c: New file. * tst-cleanupx2.c: New file. * tst-cleanupx3.c: New file. * tst-cleanup0.c: Make standard compliant. * tst-cleanup1.c: Likewise. * sysdeps/unix/sysv/linux/sem_timedwait.c: Add cancellation support. * sysdeps/unix/sysv/linux/sem_wait.c: Likewise. * sysdeps/unix/sysv/linux/i386/i486/sem_timedwait.S: Likewise. * sysdeps/unix/sysv/linux/i386/i486/sem_wait.S: Likewise. * sysdeps/unix/sysv/linux/x86_64/sem_timedwait.S: Likewise. * sysdeps/unix/sysv/linux/x86_64/sem_wait.S: Likewise. * sysdeps/i386/tcb-offsets.sym: Add RESULT, CANCELHANDLING, and CLEANUP_JMP_BUF. * sysdeps/x86_64/tcb-offsets.sym: Likewise. * tst-cancel12.c: New file. * tst-cancel13.c: New file. * tst-cancel14.c: New file. * tst-cancel15.c: New file. * Makefile (tests): Add tst-cancel12, tst-cancel13, tst-cancel14, and tst-cancel15. * tst-cancel1.c: Add some comments. * sysdeps/unix/sysv/linux/x86_64/sem_timedwait.S: Compute relative timeout correctly.
2003-06-08 07:28:14 +02:00
#include <errno.h>
#include <pthread.h>
#include <semaphore.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include <sys/time.h>
Update. 2003-06-07 Ulrich Drepper <drepper@redhat.com> * cleanup_routine.c: New file. * Versions (libpthread) [GLIBC_2.3.3]: Add __pthread_cleanup_routine. * sysdeps/pthread/pthread.h: Add support for fully exception-based cleanup handling. * Makefile (libpthread-routines): Add cleanup_routine. Add more CFLAGS variables to compile with exceptions. Add comments why which file needs unwind tables. (tests) [have-forced-unwind==yes]: Add tst-cancelx* and tst-cleanupx* tests. * tst-cancelx1.c: New file. * tst-cancelx2.c: New file. * tst-cancelx3.c: New file. * tst-cancelx4.c: New file. * tst-cancelx5.c: New file. * tst-cancelx6.c: New file. * tst-cancelx7.c: New file. * tst-cancelx8.c: New file. * tst-cancelx9.c: New file. * tst-cancelx10.c: New file. * tst-cancelx11.c: New file. * tst-cancelx12.c: New file. * tst-cancelx13.c: New file. * tst-cancelx14.c: New file. * tst-cancelx15.c: New file. * tst-cleanupx0.c: New file. * tst-cleanupx0.expect: New file. * tst-cleanupx1.c: New file. * tst-cleanupx2.c: New file. * tst-cleanupx3.c: New file. * tst-cleanup0.c: Make standard compliant. * tst-cleanup1.c: Likewise. * sysdeps/unix/sysv/linux/sem_timedwait.c: Add cancellation support. * sysdeps/unix/sysv/linux/sem_wait.c: Likewise. * sysdeps/unix/sysv/linux/i386/i486/sem_timedwait.S: Likewise. * sysdeps/unix/sysv/linux/i386/i486/sem_wait.S: Likewise. * sysdeps/unix/sysv/linux/x86_64/sem_timedwait.S: Likewise. * sysdeps/unix/sysv/linux/x86_64/sem_wait.S: Likewise. * sysdeps/i386/tcb-offsets.sym: Add RESULT, CANCELHANDLING, and CLEANUP_JMP_BUF. * sysdeps/x86_64/tcb-offsets.sym: Likewise. * tst-cancel12.c: New file. * tst-cancel13.c: New file. * tst-cancel14.c: New file. * tst-cancel15.c: New file. * Makefile (tests): Add tst-cancel12, tst-cancel13, tst-cancel14, and tst-cancel15. * tst-cancel1.c: Add some comments. * sysdeps/unix/sysv/linux/x86_64/sem_timedwait.S: Compute relative timeout correctly.
2003-06-08 07:28:14 +02:00
static pthread_barrier_t bar;
static sem_t sem;
static void
cleanup (void *arg)
{
static int ncall;
if (++ncall != 1)
{
puts ("second call to cleanup");
exit (1);
}
}
static void *
tf (void *arg)
{
int e;
pthread_cleanup_push (cleanup, NULL);
e = pthread_barrier_wait (&bar);
if (e != 0 && e != PTHREAD_BARRIER_SERIAL_THREAD)
{
nptl: Fix sem_wait and sem_timedwait cancellation (BZ#18243) This patch fixes both sem_wait and sem_timedwait cancellation point for uncontended case. In this scenario only atomics are involved and thus the futex cancellable call is not issue and a pending cancellation signal is not handled. The fix is straighforward by calling pthread_testcancel is both function start. Although it would be simpler to call CANCELLATION_P directly, I decided to add an internal pthread_testcancel alias and use it to export less internal implementation on such function. A possible change on how pthread_testcancel is internally implemented would lead to either continue to force use CANCELLATION_P or to adjust its every use. GLIBC testcase also does have tests for uncontended cases, test-cancel12 and test-cancel14.c, however both are flawed by adding another cancellation point just after thread pthread_cleanup_pop: 47 static void * 48 tf (void *arg) 49 { 50 pthread_cleanup_push (cleanup, NULL); 51 52 int e = pthread_barrier_wait (&bar); 53 if (e != 0 && e != PTHREAD_BARRIER_SERIAL_THREAD) 54 { 55 puts ("tf: 1st barrier_wait failed"); 56 exit (1); 57 } 58 59 /* This call should block and be cancelable. */ 60 sem_wait (&sem); 61 62 pthread_cleanup_pop (0); 63 64 puts ("sem_wait returned"); 65 66 return NULL; 67 } So sem_{timed}wait does not act on cancellation, pthread_cleanup_pop executes 'cleanup' and then 'puts' acts on cancellation. Since pthread_cleanup_pop removed the clean-up handler, it will ran only once and thus it won't accuse an error to indicate sem_wait has not acted on the cancellation signal. This patch also fixes this behavior by removing the cancellation point 'puts'. It also adds some cleanup on all sem_{timed}wait cancel tests. It partially fixes BZ #18243. Checked on x86_64. [BZ #18243] * nptl/pthreadP.h (__pthread_testcancel): Add prototype and hidden_proto. * nptl/pthread_testcancel.c (pthread_cancel): Add internal aliais definition. * nptl/sem_timedwait.c (sem_timedwait): Add cancellation check for uncontended case. * nptl/sem_wait.c (__new_sem_wait): Likewise. * nptl/tst-cancel12.c (cleanup): Remove wrong cancellation point. (tf): Fix check for uncontended case. (do_test): Likewise. * nptl/tst-cancel13.c (cleanup): Remove wrong cancellation point. (tf): Fix check for uncontended case. (do_test): Likewise. * nptl/tst-cancel14.c (cleanup): Remove wrong cancellation point. (tf): Fix check for uncontended case. (do_test): Likewise. * nptl/tst-cancel15.c (cleanup): Remove wrong cancellation point. (tf): Fix check for uncontended case. (do_test): Likewise.
2016-08-22 14:39:46 +02:00
puts ("error: tf: 1st barrier_wait failed");
Update. 2003-06-07 Ulrich Drepper <drepper@redhat.com> * cleanup_routine.c: New file. * Versions (libpthread) [GLIBC_2.3.3]: Add __pthread_cleanup_routine. * sysdeps/pthread/pthread.h: Add support for fully exception-based cleanup handling. * Makefile (libpthread-routines): Add cleanup_routine. Add more CFLAGS variables to compile with exceptions. Add comments why which file needs unwind tables. (tests) [have-forced-unwind==yes]: Add tst-cancelx* and tst-cleanupx* tests. * tst-cancelx1.c: New file. * tst-cancelx2.c: New file. * tst-cancelx3.c: New file. * tst-cancelx4.c: New file. * tst-cancelx5.c: New file. * tst-cancelx6.c: New file. * tst-cancelx7.c: New file. * tst-cancelx8.c: New file. * tst-cancelx9.c: New file. * tst-cancelx10.c: New file. * tst-cancelx11.c: New file. * tst-cancelx12.c: New file. * tst-cancelx13.c: New file. * tst-cancelx14.c: New file. * tst-cancelx15.c: New file. * tst-cleanupx0.c: New file. * tst-cleanupx0.expect: New file. * tst-cleanupx1.c: New file. * tst-cleanupx2.c: New file. * tst-cleanupx3.c: New file. * tst-cleanup0.c: Make standard compliant. * tst-cleanup1.c: Likewise. * sysdeps/unix/sysv/linux/sem_timedwait.c: Add cancellation support. * sysdeps/unix/sysv/linux/sem_wait.c: Likewise. * sysdeps/unix/sysv/linux/i386/i486/sem_timedwait.S: Likewise. * sysdeps/unix/sysv/linux/i386/i486/sem_wait.S: Likewise. * sysdeps/unix/sysv/linux/x86_64/sem_timedwait.S: Likewise. * sysdeps/unix/sysv/linux/x86_64/sem_wait.S: Likewise. * sysdeps/i386/tcb-offsets.sym: Add RESULT, CANCELHANDLING, and CLEANUP_JMP_BUF. * sysdeps/x86_64/tcb-offsets.sym: Likewise. * tst-cancel12.c: New file. * tst-cancel13.c: New file. * tst-cancel14.c: New file. * tst-cancel15.c: New file. * Makefile (tests): Add tst-cancel12, tst-cancel13, tst-cancel14, and tst-cancel15. * tst-cancel1.c: Add some comments. * sysdeps/unix/sysv/linux/x86_64/sem_timedwait.S: Compute relative timeout correctly.
2003-06-08 07:28:14 +02:00
exit (1);
}
struct timeval tv;
(void) gettimeofday (&tv, NULL);
struct timespec ts;
TIMEVAL_TO_TIMESPEC (&tv, &ts);
/* Timeout in 5 seconds. */
ts.tv_sec += 5;
/* This call should block and be cancelable. */
errno = 0;
e = sem_timedwait (&sem, &ts);
pthread_cleanup_pop (0);
return NULL;
}
static int
do_test (void)
{
pthread_t th;
if (pthread_barrier_init (&bar, NULL, 2) != 0)
{
nptl: Fix sem_wait and sem_timedwait cancellation (BZ#18243) This patch fixes both sem_wait and sem_timedwait cancellation point for uncontended case. In this scenario only atomics are involved and thus the futex cancellable call is not issue and a pending cancellation signal is not handled. The fix is straighforward by calling pthread_testcancel is both function start. Although it would be simpler to call CANCELLATION_P directly, I decided to add an internal pthread_testcancel alias and use it to export less internal implementation on such function. A possible change on how pthread_testcancel is internally implemented would lead to either continue to force use CANCELLATION_P or to adjust its every use. GLIBC testcase also does have tests for uncontended cases, test-cancel12 and test-cancel14.c, however both are flawed by adding another cancellation point just after thread pthread_cleanup_pop: 47 static void * 48 tf (void *arg) 49 { 50 pthread_cleanup_push (cleanup, NULL); 51 52 int e = pthread_barrier_wait (&bar); 53 if (e != 0 && e != PTHREAD_BARRIER_SERIAL_THREAD) 54 { 55 puts ("tf: 1st barrier_wait failed"); 56 exit (1); 57 } 58 59 /* This call should block and be cancelable. */ 60 sem_wait (&sem); 61 62 pthread_cleanup_pop (0); 63 64 puts ("sem_wait returned"); 65 66 return NULL; 67 } So sem_{timed}wait does not act on cancellation, pthread_cleanup_pop executes 'cleanup' and then 'puts' acts on cancellation. Since pthread_cleanup_pop removed the clean-up handler, it will ran only once and thus it won't accuse an error to indicate sem_wait has not acted on the cancellation signal. This patch also fixes this behavior by removing the cancellation point 'puts'. It also adds some cleanup on all sem_{timed}wait cancel tests. It partially fixes BZ #18243. Checked on x86_64. [BZ #18243] * nptl/pthreadP.h (__pthread_testcancel): Add prototype and hidden_proto. * nptl/pthread_testcancel.c (pthread_cancel): Add internal aliais definition. * nptl/sem_timedwait.c (sem_timedwait): Add cancellation check for uncontended case. * nptl/sem_wait.c (__new_sem_wait): Likewise. * nptl/tst-cancel12.c (cleanup): Remove wrong cancellation point. (tf): Fix check for uncontended case. (do_test): Likewise. * nptl/tst-cancel13.c (cleanup): Remove wrong cancellation point. (tf): Fix check for uncontended case. (do_test): Likewise. * nptl/tst-cancel14.c (cleanup): Remove wrong cancellation point. (tf): Fix check for uncontended case. (do_test): Likewise. * nptl/tst-cancel15.c (cleanup): Remove wrong cancellation point. (tf): Fix check for uncontended case. (do_test): Likewise.
2016-08-22 14:39:46 +02:00
puts ("error: barrier_init failed");
Update. 2003-06-07 Ulrich Drepper <drepper@redhat.com> * cleanup_routine.c: New file. * Versions (libpthread) [GLIBC_2.3.3]: Add __pthread_cleanup_routine. * sysdeps/pthread/pthread.h: Add support for fully exception-based cleanup handling. * Makefile (libpthread-routines): Add cleanup_routine. Add more CFLAGS variables to compile with exceptions. Add comments why which file needs unwind tables. (tests) [have-forced-unwind==yes]: Add tst-cancelx* and tst-cleanupx* tests. * tst-cancelx1.c: New file. * tst-cancelx2.c: New file. * tst-cancelx3.c: New file. * tst-cancelx4.c: New file. * tst-cancelx5.c: New file. * tst-cancelx6.c: New file. * tst-cancelx7.c: New file. * tst-cancelx8.c: New file. * tst-cancelx9.c: New file. * tst-cancelx10.c: New file. * tst-cancelx11.c: New file. * tst-cancelx12.c: New file. * tst-cancelx13.c: New file. * tst-cancelx14.c: New file. * tst-cancelx15.c: New file. * tst-cleanupx0.c: New file. * tst-cleanupx0.expect: New file. * tst-cleanupx1.c: New file. * tst-cleanupx2.c: New file. * tst-cleanupx3.c: New file. * tst-cleanup0.c: Make standard compliant. * tst-cleanup1.c: Likewise. * sysdeps/unix/sysv/linux/sem_timedwait.c: Add cancellation support. * sysdeps/unix/sysv/linux/sem_wait.c: Likewise. * sysdeps/unix/sysv/linux/i386/i486/sem_timedwait.S: Likewise. * sysdeps/unix/sysv/linux/i386/i486/sem_wait.S: Likewise. * sysdeps/unix/sysv/linux/x86_64/sem_timedwait.S: Likewise. * sysdeps/unix/sysv/linux/x86_64/sem_wait.S: Likewise. * sysdeps/i386/tcb-offsets.sym: Add RESULT, CANCELHANDLING, and CLEANUP_JMP_BUF. * sysdeps/x86_64/tcb-offsets.sym: Likewise. * tst-cancel12.c: New file. * tst-cancel13.c: New file. * tst-cancel14.c: New file. * tst-cancel15.c: New file. * Makefile (tests): Add tst-cancel12, tst-cancel13, tst-cancel14, and tst-cancel15. * tst-cancel1.c: Add some comments. * sysdeps/unix/sysv/linux/x86_64/sem_timedwait.S: Compute relative timeout correctly.
2003-06-08 07:28:14 +02:00
exit (1);
}
if (sem_init (&sem, 0, 0) != 0)
{
nptl: Fix sem_wait and sem_timedwait cancellation (BZ#18243) This patch fixes both sem_wait and sem_timedwait cancellation point for uncontended case. In this scenario only atomics are involved and thus the futex cancellable call is not issue and a pending cancellation signal is not handled. The fix is straighforward by calling pthread_testcancel is both function start. Although it would be simpler to call CANCELLATION_P directly, I decided to add an internal pthread_testcancel alias and use it to export less internal implementation on such function. A possible change on how pthread_testcancel is internally implemented would lead to either continue to force use CANCELLATION_P or to adjust its every use. GLIBC testcase also does have tests for uncontended cases, test-cancel12 and test-cancel14.c, however both are flawed by adding another cancellation point just after thread pthread_cleanup_pop: 47 static void * 48 tf (void *arg) 49 { 50 pthread_cleanup_push (cleanup, NULL); 51 52 int e = pthread_barrier_wait (&bar); 53 if (e != 0 && e != PTHREAD_BARRIER_SERIAL_THREAD) 54 { 55 puts ("tf: 1st barrier_wait failed"); 56 exit (1); 57 } 58 59 /* This call should block and be cancelable. */ 60 sem_wait (&sem); 61 62 pthread_cleanup_pop (0); 63 64 puts ("sem_wait returned"); 65 66 return NULL; 67 } So sem_{timed}wait does not act on cancellation, pthread_cleanup_pop executes 'cleanup' and then 'puts' acts on cancellation. Since pthread_cleanup_pop removed the clean-up handler, it will ran only once and thus it won't accuse an error to indicate sem_wait has not acted on the cancellation signal. This patch also fixes this behavior by removing the cancellation point 'puts'. It also adds some cleanup on all sem_{timed}wait cancel tests. It partially fixes BZ #18243. Checked on x86_64. [BZ #18243] * nptl/pthreadP.h (__pthread_testcancel): Add prototype and hidden_proto. * nptl/pthread_testcancel.c (pthread_cancel): Add internal aliais definition. * nptl/sem_timedwait.c (sem_timedwait): Add cancellation check for uncontended case. * nptl/sem_wait.c (__new_sem_wait): Likewise. * nptl/tst-cancel12.c (cleanup): Remove wrong cancellation point. (tf): Fix check for uncontended case. (do_test): Likewise. * nptl/tst-cancel13.c (cleanup): Remove wrong cancellation point. (tf): Fix check for uncontended case. (do_test): Likewise. * nptl/tst-cancel14.c (cleanup): Remove wrong cancellation point. (tf): Fix check for uncontended case. (do_test): Likewise. * nptl/tst-cancel15.c (cleanup): Remove wrong cancellation point. (tf): Fix check for uncontended case. (do_test): Likewise.
2016-08-22 14:39:46 +02:00
puts ("error: sem_init failed");
Update. 2003-06-07 Ulrich Drepper <drepper@redhat.com> * cleanup_routine.c: New file. * Versions (libpthread) [GLIBC_2.3.3]: Add __pthread_cleanup_routine. * sysdeps/pthread/pthread.h: Add support for fully exception-based cleanup handling. * Makefile (libpthread-routines): Add cleanup_routine. Add more CFLAGS variables to compile with exceptions. Add comments why which file needs unwind tables. (tests) [have-forced-unwind==yes]: Add tst-cancelx* and tst-cleanupx* tests. * tst-cancelx1.c: New file. * tst-cancelx2.c: New file. * tst-cancelx3.c: New file. * tst-cancelx4.c: New file. * tst-cancelx5.c: New file. * tst-cancelx6.c: New file. * tst-cancelx7.c: New file. * tst-cancelx8.c: New file. * tst-cancelx9.c: New file. * tst-cancelx10.c: New file. * tst-cancelx11.c: New file. * tst-cancelx12.c: New file. * tst-cancelx13.c: New file. * tst-cancelx14.c: New file. * tst-cancelx15.c: New file. * tst-cleanupx0.c: New file. * tst-cleanupx0.expect: New file. * tst-cleanupx1.c: New file. * tst-cleanupx2.c: New file. * tst-cleanupx3.c: New file. * tst-cleanup0.c: Make standard compliant. * tst-cleanup1.c: Likewise. * sysdeps/unix/sysv/linux/sem_timedwait.c: Add cancellation support. * sysdeps/unix/sysv/linux/sem_wait.c: Likewise. * sysdeps/unix/sysv/linux/i386/i486/sem_timedwait.S: Likewise. * sysdeps/unix/sysv/linux/i386/i486/sem_wait.S: Likewise. * sysdeps/unix/sysv/linux/x86_64/sem_timedwait.S: Likewise. * sysdeps/unix/sysv/linux/x86_64/sem_wait.S: Likewise. * sysdeps/i386/tcb-offsets.sym: Add RESULT, CANCELHANDLING, and CLEANUP_JMP_BUF. * sysdeps/x86_64/tcb-offsets.sym: Likewise. * tst-cancel12.c: New file. * tst-cancel13.c: New file. * tst-cancel14.c: New file. * tst-cancel15.c: New file. * Makefile (tests): Add tst-cancel12, tst-cancel13, tst-cancel14, and tst-cancel15. * tst-cancel1.c: Add some comments. * sysdeps/unix/sysv/linux/x86_64/sem_timedwait.S: Compute relative timeout correctly.
2003-06-08 07:28:14 +02:00
exit (1);
}
if (pthread_create (&th, NULL, tf, NULL) != 0)
{
nptl: Fix sem_wait and sem_timedwait cancellation (BZ#18243) This patch fixes both sem_wait and sem_timedwait cancellation point for uncontended case. In this scenario only atomics are involved and thus the futex cancellable call is not issue and a pending cancellation signal is not handled. The fix is straighforward by calling pthread_testcancel is both function start. Although it would be simpler to call CANCELLATION_P directly, I decided to add an internal pthread_testcancel alias and use it to export less internal implementation on such function. A possible change on how pthread_testcancel is internally implemented would lead to either continue to force use CANCELLATION_P or to adjust its every use. GLIBC testcase also does have tests for uncontended cases, test-cancel12 and test-cancel14.c, however both are flawed by adding another cancellation point just after thread pthread_cleanup_pop: 47 static void * 48 tf (void *arg) 49 { 50 pthread_cleanup_push (cleanup, NULL); 51 52 int e = pthread_barrier_wait (&bar); 53 if (e != 0 && e != PTHREAD_BARRIER_SERIAL_THREAD) 54 { 55 puts ("tf: 1st barrier_wait failed"); 56 exit (1); 57 } 58 59 /* This call should block and be cancelable. */ 60 sem_wait (&sem); 61 62 pthread_cleanup_pop (0); 63 64 puts ("sem_wait returned"); 65 66 return NULL; 67 } So sem_{timed}wait does not act on cancellation, pthread_cleanup_pop executes 'cleanup' and then 'puts' acts on cancellation. Since pthread_cleanup_pop removed the clean-up handler, it will ran only once and thus it won't accuse an error to indicate sem_wait has not acted on the cancellation signal. This patch also fixes this behavior by removing the cancellation point 'puts'. It also adds some cleanup on all sem_{timed}wait cancel tests. It partially fixes BZ #18243. Checked on x86_64. [BZ #18243] * nptl/pthreadP.h (__pthread_testcancel): Add prototype and hidden_proto. * nptl/pthread_testcancel.c (pthread_cancel): Add internal aliais definition. * nptl/sem_timedwait.c (sem_timedwait): Add cancellation check for uncontended case. * nptl/sem_wait.c (__new_sem_wait): Likewise. * nptl/tst-cancel12.c (cleanup): Remove wrong cancellation point. (tf): Fix check for uncontended case. (do_test): Likewise. * nptl/tst-cancel13.c (cleanup): Remove wrong cancellation point. (tf): Fix check for uncontended case. (do_test): Likewise. * nptl/tst-cancel14.c (cleanup): Remove wrong cancellation point. (tf): Fix check for uncontended case. (do_test): Likewise. * nptl/tst-cancel15.c (cleanup): Remove wrong cancellation point. (tf): Fix check for uncontended case. (do_test): Likewise.
2016-08-22 14:39:46 +02:00
puts ("error: create failed");
Update. 2003-06-07 Ulrich Drepper <drepper@redhat.com> * cleanup_routine.c: New file. * Versions (libpthread) [GLIBC_2.3.3]: Add __pthread_cleanup_routine. * sysdeps/pthread/pthread.h: Add support for fully exception-based cleanup handling. * Makefile (libpthread-routines): Add cleanup_routine. Add more CFLAGS variables to compile with exceptions. Add comments why which file needs unwind tables. (tests) [have-forced-unwind==yes]: Add tst-cancelx* and tst-cleanupx* tests. * tst-cancelx1.c: New file. * tst-cancelx2.c: New file. * tst-cancelx3.c: New file. * tst-cancelx4.c: New file. * tst-cancelx5.c: New file. * tst-cancelx6.c: New file. * tst-cancelx7.c: New file. * tst-cancelx8.c: New file. * tst-cancelx9.c: New file. * tst-cancelx10.c: New file. * tst-cancelx11.c: New file. * tst-cancelx12.c: New file. * tst-cancelx13.c: New file. * tst-cancelx14.c: New file. * tst-cancelx15.c: New file. * tst-cleanupx0.c: New file. * tst-cleanupx0.expect: New file. * tst-cleanupx1.c: New file. * tst-cleanupx2.c: New file. * tst-cleanupx3.c: New file. * tst-cleanup0.c: Make standard compliant. * tst-cleanup1.c: Likewise. * sysdeps/unix/sysv/linux/sem_timedwait.c: Add cancellation support. * sysdeps/unix/sysv/linux/sem_wait.c: Likewise. * sysdeps/unix/sysv/linux/i386/i486/sem_timedwait.S: Likewise. * sysdeps/unix/sysv/linux/i386/i486/sem_wait.S: Likewise. * sysdeps/unix/sysv/linux/x86_64/sem_timedwait.S: Likewise. * sysdeps/unix/sysv/linux/x86_64/sem_wait.S: Likewise. * sysdeps/i386/tcb-offsets.sym: Add RESULT, CANCELHANDLING, and CLEANUP_JMP_BUF. * sysdeps/x86_64/tcb-offsets.sym: Likewise. * tst-cancel12.c: New file. * tst-cancel13.c: New file. * tst-cancel14.c: New file. * tst-cancel15.c: New file. * Makefile (tests): Add tst-cancel12, tst-cancel13, tst-cancel14, and tst-cancel15. * tst-cancel1.c: Add some comments. * sysdeps/unix/sysv/linux/x86_64/sem_timedwait.S: Compute relative timeout correctly.
2003-06-08 07:28:14 +02:00
exit (1);
}
int e = pthread_barrier_wait (&bar);
if (e != 0 && e != PTHREAD_BARRIER_SERIAL_THREAD)
{
nptl: Fix sem_wait and sem_timedwait cancellation (BZ#18243) This patch fixes both sem_wait and sem_timedwait cancellation point for uncontended case. In this scenario only atomics are involved and thus the futex cancellable call is not issue and a pending cancellation signal is not handled. The fix is straighforward by calling pthread_testcancel is both function start. Although it would be simpler to call CANCELLATION_P directly, I decided to add an internal pthread_testcancel alias and use it to export less internal implementation on such function. A possible change on how pthread_testcancel is internally implemented would lead to either continue to force use CANCELLATION_P or to adjust its every use. GLIBC testcase also does have tests for uncontended cases, test-cancel12 and test-cancel14.c, however both are flawed by adding another cancellation point just after thread pthread_cleanup_pop: 47 static void * 48 tf (void *arg) 49 { 50 pthread_cleanup_push (cleanup, NULL); 51 52 int e = pthread_barrier_wait (&bar); 53 if (e != 0 && e != PTHREAD_BARRIER_SERIAL_THREAD) 54 { 55 puts ("tf: 1st barrier_wait failed"); 56 exit (1); 57 } 58 59 /* This call should block and be cancelable. */ 60 sem_wait (&sem); 61 62 pthread_cleanup_pop (0); 63 64 puts ("sem_wait returned"); 65 66 return NULL; 67 } So sem_{timed}wait does not act on cancellation, pthread_cleanup_pop executes 'cleanup' and then 'puts' acts on cancellation. Since pthread_cleanup_pop removed the clean-up handler, it will ran only once and thus it won't accuse an error to indicate sem_wait has not acted on the cancellation signal. This patch also fixes this behavior by removing the cancellation point 'puts'. It also adds some cleanup on all sem_{timed}wait cancel tests. It partially fixes BZ #18243. Checked on x86_64. [BZ #18243] * nptl/pthreadP.h (__pthread_testcancel): Add prototype and hidden_proto. * nptl/pthread_testcancel.c (pthread_cancel): Add internal aliais definition. * nptl/sem_timedwait.c (sem_timedwait): Add cancellation check for uncontended case. * nptl/sem_wait.c (__new_sem_wait): Likewise. * nptl/tst-cancel12.c (cleanup): Remove wrong cancellation point. (tf): Fix check for uncontended case. (do_test): Likewise. * nptl/tst-cancel13.c (cleanup): Remove wrong cancellation point. (tf): Fix check for uncontended case. (do_test): Likewise. * nptl/tst-cancel14.c (cleanup): Remove wrong cancellation point. (tf): Fix check for uncontended case. (do_test): Likewise. * nptl/tst-cancel15.c (cleanup): Remove wrong cancellation point. (tf): Fix check for uncontended case. (do_test): Likewise.
2016-08-22 14:39:46 +02:00
puts ("error: 1st barrier_wait failed");
Update. 2003-06-07 Ulrich Drepper <drepper@redhat.com> * cleanup_routine.c: New file. * Versions (libpthread) [GLIBC_2.3.3]: Add __pthread_cleanup_routine. * sysdeps/pthread/pthread.h: Add support for fully exception-based cleanup handling. * Makefile (libpthread-routines): Add cleanup_routine. Add more CFLAGS variables to compile with exceptions. Add comments why which file needs unwind tables. (tests) [have-forced-unwind==yes]: Add tst-cancelx* and tst-cleanupx* tests. * tst-cancelx1.c: New file. * tst-cancelx2.c: New file. * tst-cancelx3.c: New file. * tst-cancelx4.c: New file. * tst-cancelx5.c: New file. * tst-cancelx6.c: New file. * tst-cancelx7.c: New file. * tst-cancelx8.c: New file. * tst-cancelx9.c: New file. * tst-cancelx10.c: New file. * tst-cancelx11.c: New file. * tst-cancelx12.c: New file. * tst-cancelx13.c: New file. * tst-cancelx14.c: New file. * tst-cancelx15.c: New file. * tst-cleanupx0.c: New file. * tst-cleanupx0.expect: New file. * tst-cleanupx1.c: New file. * tst-cleanupx2.c: New file. * tst-cleanupx3.c: New file. * tst-cleanup0.c: Make standard compliant. * tst-cleanup1.c: Likewise. * sysdeps/unix/sysv/linux/sem_timedwait.c: Add cancellation support. * sysdeps/unix/sysv/linux/sem_wait.c: Likewise. * sysdeps/unix/sysv/linux/i386/i486/sem_timedwait.S: Likewise. * sysdeps/unix/sysv/linux/i386/i486/sem_wait.S: Likewise. * sysdeps/unix/sysv/linux/x86_64/sem_timedwait.S: Likewise. * sysdeps/unix/sysv/linux/x86_64/sem_wait.S: Likewise. * sysdeps/i386/tcb-offsets.sym: Add RESULT, CANCELHANDLING, and CLEANUP_JMP_BUF. * sysdeps/x86_64/tcb-offsets.sym: Likewise. * tst-cancel12.c: New file. * tst-cancel13.c: New file. * tst-cancel14.c: New file. * tst-cancel15.c: New file. * Makefile (tests): Add tst-cancel12, tst-cancel13, tst-cancel14, and tst-cancel15. * tst-cancel1.c: Add some comments. * sysdeps/unix/sysv/linux/x86_64/sem_timedwait.S: Compute relative timeout correctly.
2003-06-08 07:28:14 +02:00
exit (1);
}
/* Give the child a chance to go to sleep in sem_wait. */
sleep (1);
/* Check whether cancellation is honored when waiting in sem_timedwait. */
if (pthread_cancel (th) != 0)
{
nptl: Fix sem_wait and sem_timedwait cancellation (BZ#18243) This patch fixes both sem_wait and sem_timedwait cancellation point for uncontended case. In this scenario only atomics are involved and thus the futex cancellable call is not issue and a pending cancellation signal is not handled. The fix is straighforward by calling pthread_testcancel is both function start. Although it would be simpler to call CANCELLATION_P directly, I decided to add an internal pthread_testcancel alias and use it to export less internal implementation on such function. A possible change on how pthread_testcancel is internally implemented would lead to either continue to force use CANCELLATION_P or to adjust its every use. GLIBC testcase also does have tests for uncontended cases, test-cancel12 and test-cancel14.c, however both are flawed by adding another cancellation point just after thread pthread_cleanup_pop: 47 static void * 48 tf (void *arg) 49 { 50 pthread_cleanup_push (cleanup, NULL); 51 52 int e = pthread_barrier_wait (&bar); 53 if (e != 0 && e != PTHREAD_BARRIER_SERIAL_THREAD) 54 { 55 puts ("tf: 1st barrier_wait failed"); 56 exit (1); 57 } 58 59 /* This call should block and be cancelable. */ 60 sem_wait (&sem); 61 62 pthread_cleanup_pop (0); 63 64 puts ("sem_wait returned"); 65 66 return NULL; 67 } So sem_{timed}wait does not act on cancellation, pthread_cleanup_pop executes 'cleanup' and then 'puts' acts on cancellation. Since pthread_cleanup_pop removed the clean-up handler, it will ran only once and thus it won't accuse an error to indicate sem_wait has not acted on the cancellation signal. This patch also fixes this behavior by removing the cancellation point 'puts'. It also adds some cleanup on all sem_{timed}wait cancel tests. It partially fixes BZ #18243. Checked on x86_64. [BZ #18243] * nptl/pthreadP.h (__pthread_testcancel): Add prototype and hidden_proto. * nptl/pthread_testcancel.c (pthread_cancel): Add internal aliais definition. * nptl/sem_timedwait.c (sem_timedwait): Add cancellation check for uncontended case. * nptl/sem_wait.c (__new_sem_wait): Likewise. * nptl/tst-cancel12.c (cleanup): Remove wrong cancellation point. (tf): Fix check for uncontended case. (do_test): Likewise. * nptl/tst-cancel13.c (cleanup): Remove wrong cancellation point. (tf): Fix check for uncontended case. (do_test): Likewise. * nptl/tst-cancel14.c (cleanup): Remove wrong cancellation point. (tf): Fix check for uncontended case. (do_test): Likewise. * nptl/tst-cancel15.c (cleanup): Remove wrong cancellation point. (tf): Fix check for uncontended case. (do_test): Likewise.
2016-08-22 14:39:46 +02:00
puts ("error: 1st cancel failed");
Update. 2003-06-07 Ulrich Drepper <drepper@redhat.com> * cleanup_routine.c: New file. * Versions (libpthread) [GLIBC_2.3.3]: Add __pthread_cleanup_routine. * sysdeps/pthread/pthread.h: Add support for fully exception-based cleanup handling. * Makefile (libpthread-routines): Add cleanup_routine. Add more CFLAGS variables to compile with exceptions. Add comments why which file needs unwind tables. (tests) [have-forced-unwind==yes]: Add tst-cancelx* and tst-cleanupx* tests. * tst-cancelx1.c: New file. * tst-cancelx2.c: New file. * tst-cancelx3.c: New file. * tst-cancelx4.c: New file. * tst-cancelx5.c: New file. * tst-cancelx6.c: New file. * tst-cancelx7.c: New file. * tst-cancelx8.c: New file. * tst-cancelx9.c: New file. * tst-cancelx10.c: New file. * tst-cancelx11.c: New file. * tst-cancelx12.c: New file. * tst-cancelx13.c: New file. * tst-cancelx14.c: New file. * tst-cancelx15.c: New file. * tst-cleanupx0.c: New file. * tst-cleanupx0.expect: New file. * tst-cleanupx1.c: New file. * tst-cleanupx2.c: New file. * tst-cleanupx3.c: New file. * tst-cleanup0.c: Make standard compliant. * tst-cleanup1.c: Likewise. * sysdeps/unix/sysv/linux/sem_timedwait.c: Add cancellation support. * sysdeps/unix/sysv/linux/sem_wait.c: Likewise. * sysdeps/unix/sysv/linux/i386/i486/sem_timedwait.S: Likewise. * sysdeps/unix/sysv/linux/i386/i486/sem_wait.S: Likewise. * sysdeps/unix/sysv/linux/x86_64/sem_timedwait.S: Likewise. * sysdeps/unix/sysv/linux/x86_64/sem_wait.S: Likewise. * sysdeps/i386/tcb-offsets.sym: Add RESULT, CANCELHANDLING, and CLEANUP_JMP_BUF. * sysdeps/x86_64/tcb-offsets.sym: Likewise. * tst-cancel12.c: New file. * tst-cancel13.c: New file. * tst-cancel14.c: New file. * tst-cancel15.c: New file. * Makefile (tests): Add tst-cancel12, tst-cancel13, tst-cancel14, and tst-cancel15. * tst-cancel1.c: Add some comments. * sysdeps/unix/sysv/linux/x86_64/sem_timedwait.S: Compute relative timeout correctly.
2003-06-08 07:28:14 +02:00
exit (1);
}
void *r;
if (pthread_join (th, &r) != 0)
{
nptl: Fix sem_wait and sem_timedwait cancellation (BZ#18243) This patch fixes both sem_wait and sem_timedwait cancellation point for uncontended case. In this scenario only atomics are involved and thus the futex cancellable call is not issue and a pending cancellation signal is not handled. The fix is straighforward by calling pthread_testcancel is both function start. Although it would be simpler to call CANCELLATION_P directly, I decided to add an internal pthread_testcancel alias and use it to export less internal implementation on such function. A possible change on how pthread_testcancel is internally implemented would lead to either continue to force use CANCELLATION_P or to adjust its every use. GLIBC testcase also does have tests for uncontended cases, test-cancel12 and test-cancel14.c, however both are flawed by adding another cancellation point just after thread pthread_cleanup_pop: 47 static void * 48 tf (void *arg) 49 { 50 pthread_cleanup_push (cleanup, NULL); 51 52 int e = pthread_barrier_wait (&bar); 53 if (e != 0 && e != PTHREAD_BARRIER_SERIAL_THREAD) 54 { 55 puts ("tf: 1st barrier_wait failed"); 56 exit (1); 57 } 58 59 /* This call should block and be cancelable. */ 60 sem_wait (&sem); 61 62 pthread_cleanup_pop (0); 63 64 puts ("sem_wait returned"); 65 66 return NULL; 67 } So sem_{timed}wait does not act on cancellation, pthread_cleanup_pop executes 'cleanup' and then 'puts' acts on cancellation. Since pthread_cleanup_pop removed the clean-up handler, it will ran only once and thus it won't accuse an error to indicate sem_wait has not acted on the cancellation signal. This patch also fixes this behavior by removing the cancellation point 'puts'. It also adds some cleanup on all sem_{timed}wait cancel tests. It partially fixes BZ #18243. Checked on x86_64. [BZ #18243] * nptl/pthreadP.h (__pthread_testcancel): Add prototype and hidden_proto. * nptl/pthread_testcancel.c (pthread_cancel): Add internal aliais definition. * nptl/sem_timedwait.c (sem_timedwait): Add cancellation check for uncontended case. * nptl/sem_wait.c (__new_sem_wait): Likewise. * nptl/tst-cancel12.c (cleanup): Remove wrong cancellation point. (tf): Fix check for uncontended case. (do_test): Likewise. * nptl/tst-cancel13.c (cleanup): Remove wrong cancellation point. (tf): Fix check for uncontended case. (do_test): Likewise. * nptl/tst-cancel14.c (cleanup): Remove wrong cancellation point. (tf): Fix check for uncontended case. (do_test): Likewise. * nptl/tst-cancel15.c (cleanup): Remove wrong cancellation point. (tf): Fix check for uncontended case. (do_test): Likewise.
2016-08-22 14:39:46 +02:00
puts ("error: join failed");
Update. 2003-06-07 Ulrich Drepper <drepper@redhat.com> * cleanup_routine.c: New file. * Versions (libpthread) [GLIBC_2.3.3]: Add __pthread_cleanup_routine. * sysdeps/pthread/pthread.h: Add support for fully exception-based cleanup handling. * Makefile (libpthread-routines): Add cleanup_routine. Add more CFLAGS variables to compile with exceptions. Add comments why which file needs unwind tables. (tests) [have-forced-unwind==yes]: Add tst-cancelx* and tst-cleanupx* tests. * tst-cancelx1.c: New file. * tst-cancelx2.c: New file. * tst-cancelx3.c: New file. * tst-cancelx4.c: New file. * tst-cancelx5.c: New file. * tst-cancelx6.c: New file. * tst-cancelx7.c: New file. * tst-cancelx8.c: New file. * tst-cancelx9.c: New file. * tst-cancelx10.c: New file. * tst-cancelx11.c: New file. * tst-cancelx12.c: New file. * tst-cancelx13.c: New file. * tst-cancelx14.c: New file. * tst-cancelx15.c: New file. * tst-cleanupx0.c: New file. * tst-cleanupx0.expect: New file. * tst-cleanupx1.c: New file. * tst-cleanupx2.c: New file. * tst-cleanupx3.c: New file. * tst-cleanup0.c: Make standard compliant. * tst-cleanup1.c: Likewise. * sysdeps/unix/sysv/linux/sem_timedwait.c: Add cancellation support. * sysdeps/unix/sysv/linux/sem_wait.c: Likewise. * sysdeps/unix/sysv/linux/i386/i486/sem_timedwait.S: Likewise. * sysdeps/unix/sysv/linux/i386/i486/sem_wait.S: Likewise. * sysdeps/unix/sysv/linux/x86_64/sem_timedwait.S: Likewise. * sysdeps/unix/sysv/linux/x86_64/sem_wait.S: Likewise. * sysdeps/i386/tcb-offsets.sym: Add RESULT, CANCELHANDLING, and CLEANUP_JMP_BUF. * sysdeps/x86_64/tcb-offsets.sym: Likewise. * tst-cancel12.c: New file. * tst-cancel13.c: New file. * tst-cancel14.c: New file. * tst-cancel15.c: New file. * Makefile (tests): Add tst-cancel12, tst-cancel13, tst-cancel14, and tst-cancel15. * tst-cancel1.c: Add some comments. * sysdeps/unix/sysv/linux/x86_64/sem_timedwait.S: Compute relative timeout correctly.
2003-06-08 07:28:14 +02:00
exit (1);
}
if (r != PTHREAD_CANCELED)
{
nptl: Fix sem_wait and sem_timedwait cancellation (BZ#18243) This patch fixes both sem_wait and sem_timedwait cancellation point for uncontended case. In this scenario only atomics are involved and thus the futex cancellable call is not issue and a pending cancellation signal is not handled. The fix is straighforward by calling pthread_testcancel is both function start. Although it would be simpler to call CANCELLATION_P directly, I decided to add an internal pthread_testcancel alias and use it to export less internal implementation on such function. A possible change on how pthread_testcancel is internally implemented would lead to either continue to force use CANCELLATION_P or to adjust its every use. GLIBC testcase also does have tests for uncontended cases, test-cancel12 and test-cancel14.c, however both are flawed by adding another cancellation point just after thread pthread_cleanup_pop: 47 static void * 48 tf (void *arg) 49 { 50 pthread_cleanup_push (cleanup, NULL); 51 52 int e = pthread_barrier_wait (&bar); 53 if (e != 0 && e != PTHREAD_BARRIER_SERIAL_THREAD) 54 { 55 puts ("tf: 1st barrier_wait failed"); 56 exit (1); 57 } 58 59 /* This call should block and be cancelable. */ 60 sem_wait (&sem); 61 62 pthread_cleanup_pop (0); 63 64 puts ("sem_wait returned"); 65 66 return NULL; 67 } So sem_{timed}wait does not act on cancellation, pthread_cleanup_pop executes 'cleanup' and then 'puts' acts on cancellation. Since pthread_cleanup_pop removed the clean-up handler, it will ran only once and thus it won't accuse an error to indicate sem_wait has not acted on the cancellation signal. This patch also fixes this behavior by removing the cancellation point 'puts'. It also adds some cleanup on all sem_{timed}wait cancel tests. It partially fixes BZ #18243. Checked on x86_64. [BZ #18243] * nptl/pthreadP.h (__pthread_testcancel): Add prototype and hidden_proto. * nptl/pthread_testcancel.c (pthread_cancel): Add internal aliais definition. * nptl/sem_timedwait.c (sem_timedwait): Add cancellation check for uncontended case. * nptl/sem_wait.c (__new_sem_wait): Likewise. * nptl/tst-cancel12.c (cleanup): Remove wrong cancellation point. (tf): Fix check for uncontended case. (do_test): Likewise. * nptl/tst-cancel13.c (cleanup): Remove wrong cancellation point. (tf): Fix check for uncontended case. (do_test): Likewise. * nptl/tst-cancel14.c (cleanup): Remove wrong cancellation point. (tf): Fix check for uncontended case. (do_test): Likewise. * nptl/tst-cancel15.c (cleanup): Remove wrong cancellation point. (tf): Fix check for uncontended case. (do_test): Likewise.
2016-08-22 14:39:46 +02:00
puts ("error: thread not canceled");
Update. 2003-06-07 Ulrich Drepper <drepper@redhat.com> * cleanup_routine.c: New file. * Versions (libpthread) [GLIBC_2.3.3]: Add __pthread_cleanup_routine. * sysdeps/pthread/pthread.h: Add support for fully exception-based cleanup handling. * Makefile (libpthread-routines): Add cleanup_routine. Add more CFLAGS variables to compile with exceptions. Add comments why which file needs unwind tables. (tests) [have-forced-unwind==yes]: Add tst-cancelx* and tst-cleanupx* tests. * tst-cancelx1.c: New file. * tst-cancelx2.c: New file. * tst-cancelx3.c: New file. * tst-cancelx4.c: New file. * tst-cancelx5.c: New file. * tst-cancelx6.c: New file. * tst-cancelx7.c: New file. * tst-cancelx8.c: New file. * tst-cancelx9.c: New file. * tst-cancelx10.c: New file. * tst-cancelx11.c: New file. * tst-cancelx12.c: New file. * tst-cancelx13.c: New file. * tst-cancelx14.c: New file. * tst-cancelx15.c: New file. * tst-cleanupx0.c: New file. * tst-cleanupx0.expect: New file. * tst-cleanupx1.c: New file. * tst-cleanupx2.c: New file. * tst-cleanupx3.c: New file. * tst-cleanup0.c: Make standard compliant. * tst-cleanup1.c: Likewise. * sysdeps/unix/sysv/linux/sem_timedwait.c: Add cancellation support. * sysdeps/unix/sysv/linux/sem_wait.c: Likewise. * sysdeps/unix/sysv/linux/i386/i486/sem_timedwait.S: Likewise. * sysdeps/unix/sysv/linux/i386/i486/sem_wait.S: Likewise. * sysdeps/unix/sysv/linux/x86_64/sem_timedwait.S: Likewise. * sysdeps/unix/sysv/linux/x86_64/sem_wait.S: Likewise. * sysdeps/i386/tcb-offsets.sym: Add RESULT, CANCELHANDLING, and CLEANUP_JMP_BUF. * sysdeps/x86_64/tcb-offsets.sym: Likewise. * tst-cancel12.c: New file. * tst-cancel13.c: New file. * tst-cancel14.c: New file. * tst-cancel15.c: New file. * Makefile (tests): Add tst-cancel12, tst-cancel13, tst-cancel14, and tst-cancel15. * tst-cancel1.c: Add some comments. * sysdeps/unix/sysv/linux/x86_64/sem_timedwait.S: Compute relative timeout correctly.
2003-06-08 07:28:14 +02:00
exit (1);
}
return 0;
}
#define TEST_FUNCTION do_test ()
#include "../test-skeleton.c"