Fix clone (CLONE_VM) pid/tid reset (BZ#19957)
As discussed in libc-alpha [1] current clone with CLONE_VM (without
CLONE_THREAD set) will reset the pthread pid/tid fields to -1. The
issue is since memory is shared between the parent and child it will
clobber parent's cached pid/tid leading to internal inconsistencies
if the value is not restored.
And even it is restored it may lead to racy conditions when between
set/restore a thread might invoke pthread function that validate the
pthread with INVALID_TD_P/INVALID_NOT_TERMINATED_TD_P and thus get
wrong results.
As stated in BZ19957, previously reports of this behaviour was close
with EWONTFIX due the fact usage of clone outside glibc is tricky
since glibc requires consistent internal pthread, while using clone
directly may not provide it. However since now posix_spawn uses
clone (CLONE_VM) to fixes various issues related to previous vfork
usage this issue requires fixing.
The vfork implementation also does something similar, but instead
it negates and restores only the *pid* field and functions that
might access its value know to handle such case (getpid, raise
and pthread ones that uses INVALID_TD_P/INVALID_NOT_TERMINATED_TD_P
macros that check only *tid* field). Also vfork does not call
__clone directly, instead calling either __NR_vfork or __NR_clone
directly.
So this patch removes this clone behavior by avoiding setting
the pthread pid/tid field for CLONE_VM. There is no need to
check for CLONE_THREAD, since the minimum supported kernel in all
architecture implies that CLONE_VM must be used with CLONE_THREAD,
otherwise clone returns EINVAL.
Instead of current approach of:
int clone(int (*fn)(void *), void *child_stack, int flags, ...)
[...]
if (flags & CLONE_THREAD)
goto do_syscall;
pid_t new_value;
if (flags & CLONE_VM)
new_value = -1;
else
new_value = getpid ();
THREAD_SETMEM (THREAD_SELF, pid, new_value);
THREAD_SETMEM (THREAD_SELF, tid, new_value);
do_syscall:
[...]
The new approach uses:
int clone(int (*fn)(void *), void *child_stack, int flags, ...)
[...]
if (flags & CLONE_VM)
goto do_syscall;
pid_t new_value = getpid ();
THREAD_SETMEM (THREAD_SELF, pid, new_value);
THREAD_SETMEM (THREAD_SELF, tid, new_value);
do_syscall:
[...]
It also removes the linux tst-getpid2.c test which expects the previous
behavior and instead add another clone test.
Tested on x86_64, i686, x32, powerpc64le, aarch64, armhf, s390, and
s390x. I also did limited check on mips32 and sparc64 (using the new
added test).
I also got reviews from both m68k, hppa, and tile. So I presume for
these architecture the patch works.
The fixes for alpha, microblaze, sh, ia64, and nio2 have not been
tested.
[1] https://sourceware.org/ml/libc-alpha/2016-04/msg00307.html
* sysdeps/unix/sysv/linux/Makefile [$(subdir) == nptl] (test): Remove
tst-getpid2.
(test): Add tst-clone2.
* sysdeps/unix/sysv/linux/tst-clone2.c: New file.
* sysdeps/unix/sysv/linux/aarch64/clone.S (__clone): Do not change
pid/tid fields for CLONE_VM.
* sysdeps/unix/sysv/linux/arm/clone.S: Likewise.
* sysdeps/unix/sysv/linux/i386/clone.S: Likewise.
* sysdeps/unix/sysv/linux/mips/clone.S: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/clone.S: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/clone.S: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/clone.S: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/clone.S: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/clone.S: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/clone.S: Likewise.
* sysdeps/unix/sysv/linux/x86_64/clone.S: Likewise.
* sysdeps/unix/sysv/linux/tst-getpid2.c: Remove file.
This commit is contained in:
Adhemerval Zanella
parent
2dce81a319
commit
0cb313f7cb
30
ChangeLog
30
ChangeLog
|
|
@ -1,3 +1,33 @@
|
|||
2016-04-29 Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
||||
|
||||
[BZ #19957]
|
||||
* sysdeps/unix/sysv/linux/Makefile [$(subdir) == nptl] (test): Remove
|
||||
tst-getpid2.
|
||||
(test): Add tst-clone2.
|
||||
* sysdeps/unix/sysv/linux/tst-clone2.c: New file.
|
||||
* sysdeps/unix/sysv/linux/aarch64/clone.S (__clone): Do not change
|
||||
pid/tid fields for CLONE_VM.
|
||||
* sysdeps/unix/sysv/linux/alpha/clone.S (__clone): Likewise.
|
||||
* sysdeps/unix/sysv/linux/arm/clone.S (__clone): Likewise.
|
||||
* sysdeps/unix/sysv/linux/hppa/clone.S (__clone): Likewise.
|
||||
* sysdeps/unix/sysv/linux/ia64/clone2.S (__clone): Likewise,
|
||||
* sysdeps/unix/sysv/linux/i386/clone.S (__clone): Likewise.
|
||||
* sysdeps/unix/sysv/linux/mips/clone.S (__clone): Likewise.
|
||||
* sysdeps/unix/sysv/linux/m68k/clone.S (__clone): Likewise.
|
||||
* sysdeps/unix/sysv/linux/nios2/clone.S (__clone): Likewise.
|
||||
* sysdeps/unix/sysv/linux/powerpc/powerpc32/clone.S (__clone):
|
||||
Likewise.
|
||||
* sysdeps/unix/sysv/linux/powerpc/powerpc64/clone.S (__clone):
|
||||
Likewise.
|
||||
* sysdeps/unix/sysv/linux/s390/s390-32/clone.S (__clone): Likewise.
|
||||
* sysdeps/unix/sysv/linux/s390/s390-64/clone.S (__clone): Likewise.
|
||||
* sysdeps/unix/sysv/linux/sh/clone.S (__clone): Likewise.
|
||||
* sysdeps/unix/sysv/linux/sparc/sparc32/clone.S (__clone): Likewise.
|
||||
* sysdeps/unix/sysv/linux/sparc/sparc64/clone.S (__clone): Likewise.
|
||||
* sysdeps/unix/sysv/linux/tile/clone.S (__clone): Likewise.
|
||||
* sysdeps/unix/sysv/linux/x86_64/clone.S (__clone): Likewise.
|
||||
* sysdeps/unix/sysv/linux/tst-getpid2.c: Remove file.
|
||||
|
||||
2016-04-29 Florian Weimer <fweimer@redhat.com>
|
||||
|
||||
[BZ #19642]
|
||||
|
|
|
|||
|
|
@ -42,7 +42,7 @@ sysdep_headers += sys/mount.h sys/acct.h sys/sysctl.h \
|
|||
bits/socket_type.h bits/syscall.h bits/sysctl.h \
|
||||
bits/mman-linux.h
|
||||
|
||||
tests += tst-clone tst-fanotify tst-personality
|
||||
tests += tst-clone tst-clone2 tst-fanotify tst-personality
|
||||
|
||||
# Generate the list of SYS_* macros for the system calls (__NR_* macros).
|
||||
|
||||
|
|
@ -194,7 +194,7 @@ CFLAGS-gai.c += -DNEED_NETLINK
|
|||
endif
|
||||
|
||||
ifeq ($(subdir),nptl)
|
||||
tests += tst-setgetname tst-align-clone tst-getpid1 tst-getpid2 \
|
||||
tests += tst-setgetname tst-align-clone tst-getpid1 \
|
||||
tst-thread-affinity-pthread tst-thread-affinity-pthread2 \
|
||||
tst-thread-affinity-sched
|
||||
endif
|
||||
|
|
|
|||
|
|
@ -72,17 +72,15 @@ thread_start:
|
|||
cfi_undefined (x30)
|
||||
mov x29, 0
|
||||
|
||||
tbnz x11, #CLONE_THREAD_BIT, 3f
|
||||
mov x0, #-1
|
||||
tbnz x11, #CLONE_VM_BIT, 2f
|
||||
tbnz x11, #CLONE_VM_BIT, 1f
|
||||
|
||||
mov x8, #SYS_ify(getpid)
|
||||
svc 0x0
|
||||
2:
|
||||
mrs x1, tpidr_el0
|
||||
sub x1, x1, #PTHREAD_SIZEOF
|
||||
str w0, [x1, #PTHREAD_PID_OFFSET]
|
||||
str w0, [x1, #PTHREAD_TID_OFFSET]
|
||||
3:
|
||||
1:
|
||||
|
||||
/* Pick the function arg and execute. */
|
||||
mov x0, x12
|
||||
|
|
|
|||
|
|
@ -24,7 +24,6 @@
|
|||
#include <bits/errno.h>
|
||||
|
||||
#define CLONE_VM 0x00000100
|
||||
#define CLONE_THREAD 0x00010000
|
||||
|
||||
/* int clone(int (*fn)(void *arg), void *child_stack, int flags,
|
||||
void *arg, pid_t *ptid, void *tls, pid_t *ctid);
|
||||
|
|
@ -94,7 +93,7 @@ thread_start:
|
|||
|
||||
/* Check and see if we need to reset the PID. */
|
||||
ldq t0, 16(sp)
|
||||
lda t1, CLONE_THREAD
|
||||
lda t1, CLONE_VM
|
||||
and t0, t1, t2
|
||||
beq t2, 2f
|
||||
1:
|
||||
|
|
@ -123,11 +122,7 @@ thread_start:
|
|||
.align 4
|
||||
2:
|
||||
rduniq
|
||||
lda t1, CLONE_VM
|
||||
mov v0, s0
|
||||
lda v0, -1
|
||||
and t0, t1, t2
|
||||
bne t2, 3f
|
||||
lda v0, __NR_getxpid
|
||||
callsys
|
||||
3:
|
||||
|
|
|
|||
|
|
@ -70,19 +70,16 @@ PSEUDO_END (__clone)
|
|||
1:
|
||||
.fnstart
|
||||
.cantunwind
|
||||
tst ip, #CLONE_THREAD
|
||||
bne 3f
|
||||
tst ip, #CLONE_VM
|
||||
bne 2f
|
||||
GET_TLS (lr)
|
||||
mov r1, r0
|
||||
tst ip, #CLONE_VM
|
||||
ldr r7, =SYS_ify(getpid)
|
||||
ite ne
|
||||
movne r0, #-1
|
||||
swieq 0x0
|
||||
swi 0x0
|
||||
NEGOFF_ADJ_BASE (r1, TID_OFFSET)
|
||||
str r0, NEGOFF_OFF1 (r1, TID_OFFSET)
|
||||
str r0, NEGOFF_OFF2 (r1, PID_OFFSET, TID_OFFSET)
|
||||
3:
|
||||
2:
|
||||
@ pick the function arg and call address off the stack and execute
|
||||
ldr r0, [sp, #4]
|
||||
ldr ip, [sp], #8
|
||||
|
|
|
|||
|
|
@ -133,19 +133,13 @@ ENTRY(__clone)
|
|||
|
||||
.LthreadStart:
|
||||
# define CLONE_VM_BIT 23 /* 0x00000100 */
|
||||
# define CLONE_THREAD_BIT 15 /* 0x00010000 */
|
||||
/* Load original clone flags.
|
||||
If CLONE_THREAD was passed, don't reset the PID/TID.
|
||||
If CLONE_VM was passed, we need to store -1 to PID/TID.
|
||||
If CLONE_VM and CLONE_THREAD were not set store the result
|
||||
of getpid to PID/TID. */
|
||||
If CLONE_VM was passed, don't modify PID/TID.
|
||||
Otherwise store the result of getpid to PID/TID. */
|
||||
ldw -56(%sp), %r26
|
||||
bb,<,n %r26, CLONE_THREAD_BIT, 1f
|
||||
bb,< %r26, CLONE_VM_BIT, 2f
|
||||
ldi -1, %ret0
|
||||
bb,<,n %r26, CLONE_VM_BIT, 1f
|
||||
ble 0x100(%sr2, %r0)
|
||||
ldi __NR_getpid, %r20
|
||||
2:
|
||||
mfctl %cr27, %r26
|
||||
stw %ret0, PID_THREAD_OFFSET(%r26)
|
||||
stw %ret0, TID_THREAD_OFFSET(%r26)
|
||||
|
|
|
|||
|
|
@ -40,7 +40,6 @@
|
|||
#define SYS_clone 120
|
||||
|
||||
#define CLONE_VM 0x00000100
|
||||
#define CLONE_THREAD 0x00010000
|
||||
|
||||
.text
|
||||
ENTRY (__clone)
|
||||
|
|
@ -108,7 +107,7 @@ L(thread_start):
|
|||
cfi_undefined (eip);
|
||||
/* Note: %esi is zero. */
|
||||
movl %esi,%ebp /* terminate the stack frame */
|
||||
testl $CLONE_THREAD, %edi
|
||||
testl $CLONE_VM, %edi
|
||||
je L(newpid)
|
||||
L(haspid):
|
||||
call *%ebx
|
||||
|
|
@ -124,9 +123,6 @@ L(here):
|
|||
|
||||
.subsection 2
|
||||
L(newpid):
|
||||
testl $CLONE_VM, %edi
|
||||
movl $-1, %eax
|
||||
jne L(nomoregetpid)
|
||||
movl $SYS_ify(getpid), %eax
|
||||
ENTER_KERNEL
|
||||
L(nomoregetpid):
|
||||
|
|
|
|||
|
|
@ -67,12 +67,10 @@ ENTRY(__clone2)
|
|||
(CHILD) mov loc0=gp
|
||||
(PARENT) ret
|
||||
;;
|
||||
tbit.nz p6,p0=in3,16 /* CLONE_THREAD */
|
||||
tbit.z p7,p10=in3,8 /* CLONE_VM */
|
||||
tbit.nz p6,p0=in3,8 /* CLONE_VM */
|
||||
(p6) br.cond.dptk 1f
|
||||
;;
|
||||
mov r15=SYS_ify (getpid)
|
||||
(p10) addl r8=-1,r0
|
||||
(p7) break __BREAK_SYSCALL
|
||||
;;
|
||||
add r9=PID,r13
|
||||
|
|
|
|||
|
|
@ -25,7 +25,6 @@
|
|||
#include <tls.h>
|
||||
|
||||
#define CLONE_VM 0x00000100
|
||||
#define CLONE_THREAD 0x00010000
|
||||
|
||||
/* int clone(int (*fn)(void *arg), void *child_stack, int flags, void *arg,
|
||||
void *parent_tidptr, void *tls, void *child_tidptr) */
|
||||
|
|
@ -100,16 +99,10 @@ thread_start:
|
|||
cfi_undefined (pc) /* Mark end of stack */
|
||||
subl %fp, %fp /* terminate the stack frame */
|
||||
/* Check and see if we need to reset the PID. */
|
||||
movel %d1, %a1
|
||||
andl #CLONE_THREAD, %d1
|
||||
jne donepid
|
||||
movel %a1, %d1
|
||||
movel #-1, %d0
|
||||
andl #CLONE_VM, %d1
|
||||
jne gotpid
|
||||
jne donepid
|
||||
movel #SYS_ify (getpid), %d0
|
||||
trap #0
|
||||
gotpid:
|
||||
movel %a0, -(%sp)
|
||||
movel %d0, -(%sp)
|
||||
bsrl __m68k_read_tp@PLTPC
|
||||
|
|
|
|||
|
|
@ -131,9 +131,8 @@ L(thread_start):
|
|||
/* The stackframe has been created on entry of clone(). */
|
||||
|
||||
/* Check and see if we need to reset the PID. */
|
||||
LONG_L a0,(PTRSIZE*2)(sp)
|
||||
and a1,a0,CLONE_THREAD
|
||||
beqz a1,L(restore_pid)
|
||||
and a1,a0,CLONE_VM
|
||||
beqz a1,L(restore_pid)
|
||||
L(donepid):
|
||||
|
||||
/* Restore the arg for user's function. */
|
||||
|
|
@ -153,12 +152,8 @@ L(donepid):
|
|||
#endif
|
||||
|
||||
L(restore_pid):
|
||||
and a1,a0,CLONE_VM
|
||||
li v0,-1
|
||||
bnez a1,L(gotpid)
|
||||
li v0,__NR_getpid
|
||||
syscall
|
||||
L(gotpid):
|
||||
READ_THREAD_POINTER(v1)
|
||||
INT_S v0,PID_OFFSET(v1)
|
||||
INT_S v0,TID_OFFSET(v1)
|
||||
|
|
|
|||
|
|
@ -26,7 +26,6 @@
|
|||
#include <tcb-offsets.h>
|
||||
|
||||
#define CLONE_VM 0x00000100
|
||||
#define CLONE_THREAD 0x00010000
|
||||
|
||||
/* int clone(int (*fn)(void *arg), void *child_stack, int flags, void *arg,
|
||||
void *parent_tidptr, void *tls, void *child_tidptr) */
|
||||
|
|
@ -71,13 +70,9 @@ thread_start:
|
|||
|
||||
/* We expect the argument registers to be preserved across system
|
||||
calls and across task cloning, so flags should be in r4 here. */
|
||||
andhi r2, r4, %hi(CLONE_THREAD)
|
||||
andi r2, r4, CLONE_VM
|
||||
bne r2, zero, 2f
|
||||
andi r3, r4, CLONE_VM
|
||||
movi r2, -1
|
||||
bne r3, zero, 3f
|
||||
DO_CALL (getpid, 0)
|
||||
3:
|
||||
stw r2, PID_OFFSET(r23)
|
||||
stw r2, TID_OFFSET(r23)
|
||||
2:
|
||||
|
|
|
|||
|
|
@ -76,13 +76,11 @@ ENTRY (__clone)
|
|||
crandc cr1*4+eq,cr1*4+eq,cr0*4+so
|
||||
bne- cr1,L(parent) /* The '-' is to minimise the race. */
|
||||
|
||||
andis. r0,r28,CLONE_THREAD>>16
|
||||
bne+ r0,L(oldpid)
|
||||
andi. r0,r28,CLONE_VM
|
||||
li r3,-1
|
||||
bne- r0,L(nomoregetpid)
|
||||
/* If CLONE_VM is set do not update the pid/tid field. */
|
||||
andi. r0,r29,CLONE_VM
|
||||
bne+ cr0,L(oldpid)
|
||||
|
||||
DO_CALL(SYS_ify(getpid))
|
||||
L(nomoregetpid):
|
||||
stw r3,TID(r2)
|
||||
stw r3,PID(r2)
|
||||
L(oldpid):
|
||||
|
|
|
|||
|
|
@ -78,13 +78,11 @@ ENTRY (__clone)
|
|||
crandc cr1*4+eq,cr1*4+eq,cr0*4+so
|
||||
bne- cr1,L(parent) /* The '-' is to minimise the race. */
|
||||
|
||||
andis. r0,r29,CLONE_THREAD>>16
|
||||
/* If CLONE_VM is set do not update the pid/tid field. */
|
||||
rldicl. r0,r29,56,63 /* flags & CLONE_VM. */
|
||||
bne+ cr0,L(oldpid)
|
||||
andi. r0,r29,CLONE_VM
|
||||
li r3,-1
|
||||
bne- cr0,L(nomoregetpid)
|
||||
|
||||
DO_CALL(SYS_ify(getpid))
|
||||
L(nomoregetpid):
|
||||
stw r3,TID(r13)
|
||||
stw r3,PID(r13)
|
||||
L(oldpid):
|
||||
|
|
|
|||
|
|
@ -54,13 +54,10 @@ error:
|
|||
PSEUDO_END (__clone)
|
||||
|
||||
thread_start:
|
||||
tmh %r3,1 /* CLONE_THREAD == 0x00010000 */
|
||||
jne 1f
|
||||
lhi %r2,-1
|
||||
tml %r3,256 /* CLONE_VM == 0x00000100 */
|
||||
jne 2f
|
||||
jne 1f
|
||||
svc SYS_ify(getpid)
|
||||
2: ear %r3,%a0
|
||||
ear %r3,%a0
|
||||
st %r2,PID(%r3)
|
||||
st %r2,TID(%r3)
|
||||
1:
|
||||
|
|
|
|||
|
|
@ -55,13 +55,10 @@ error:
|
|||
PSEUDO_END (__clone)
|
||||
|
||||
thread_start:
|
||||
tmh %r3,1 /* CLONE_THREAD == 0x00010000 */
|
||||
tmll %r3,256 /* CLONE_VM == 0x00000100 */
|
||||
jne 1f
|
||||
lhi %r2,-1
|
||||
tml %r3,256 /* CLONE_VM == 0x00000100 */
|
||||
jne 2f
|
||||
svc SYS_ify(getpid)
|
||||
2: ear %r3,%a0
|
||||
ear %r3,%a0
|
||||
sllg %r3,%r3,32
|
||||
ear %r3,%a1
|
||||
st %r2,PID(%r3)
|
||||
|
|
|
|||
|
|
@ -67,15 +67,11 @@ ENTRY(__clone)
|
|||
/* terminate the stack frame */
|
||||
mov #0, r14
|
||||
mov r4, r0
|
||||
shlr16 r0
|
||||
tst #1, r0 // CLONE_THREAD = (1 << 16)
|
||||
shlr8 r0
|
||||
tst #1, r0 // CLONE_VM = (1 << 8)
|
||||
bf/s 4f
|
||||
mov r4, r0
|
||||
/* new pid */
|
||||
shlr8 r0
|
||||
tst #1, r0 // CLONE_VM = (1 << 8)
|
||||
bf/s 3f
|
||||
mov #-1, r0
|
||||
mov #+SYS_ify(getpid), r3
|
||||
trapa #0x15
|
||||
3:
|
||||
|
|
|
|||
|
|
@ -25,7 +25,6 @@
|
|||
#include <sysdep.h>
|
||||
|
||||
#define CLONE_VM 0x00000100
|
||||
#define CLONE_THREAD 0x00010000
|
||||
|
||||
/* int clone(int (*fn)(void *arg), void *child_stack, int flags, void *arg,
|
||||
pid_t *ptid, void *tls, pid_t *ctid); */
|
||||
|
|
@ -80,15 +79,10 @@ END(__clone)
|
|||
|
||||
.type __thread_start,@function
|
||||
__thread_start:
|
||||
sethi %hi(CLONE_THREAD), %l0
|
||||
andcc %g4, %l0, %g0
|
||||
andcc %g4, CLONE_VM, %g0
|
||||
bne 1f
|
||||
andcc %g4, CLONE_VM, %g0
|
||||
bne,a 2f
|
||||
mov -1,%o0
|
||||
set __NR_getpid,%g1
|
||||
ta 0x10
|
||||
2:
|
||||
st %o0,[%g7 + PID]
|
||||
st %o0,[%g7 + TID]
|
||||
1:
|
||||
|
|
|
|||
|
|
@ -25,7 +25,6 @@
|
|||
#include <sysdep.h>
|
||||
|
||||
#define CLONE_VM 0x00000100
|
||||
#define CLONE_THREAD 0x00010000
|
||||
|
||||
/* int clone(int (*fn)(void *arg), void *child_stack, int flags, void *arg,
|
||||
pid_t *ptid, void *tls, pid_t *ctid); */
|
||||
|
|
@ -77,15 +76,11 @@ END(__clone)
|
|||
|
||||
.type __thread_start,@function
|
||||
__thread_start:
|
||||
sethi %hi(CLONE_THREAD), %l0
|
||||
andcc %g4, %l0, %g0
|
||||
andcc %g4, CLONE_VM, %g0
|
||||
bne,pt %icc, 1f
|
||||
andcc %g4, CLONE_VM, %g0
|
||||
bne,a,pn %icc, 2f
|
||||
mov -1,%o0
|
||||
set __NR_getpid,%g1
|
||||
ta 0x6d
|
||||
2: st %o0,[%g7 + PID]
|
||||
st %o0,[%g7 + PID]
|
||||
st %o0,[%g7 + TID]
|
||||
1:
|
||||
mov %g0, %fp /* terminate backtrace */
|
||||
|
|
|
|||
|
|
@ -164,43 +164,14 @@ ENTRY (__clone)
|
|||
cfi_def_cfa_offset (FRAME_SIZE)
|
||||
cfi_undefined (lr)
|
||||
/* Check and see if we need to reset the PID, which we do if
|
||||
CLONE_THREAD isn't set, i.e. we're not staying in the thread group.
|
||||
If CLONE_VM is set, we're doing some kind of thread-like clone,
|
||||
so we set the tid/pid to -1 to disable using the cached values
|
||||
in getpid(). Otherwise (if CLONE_VM isn't set), it's a
|
||||
fork-like clone, and we go ahead and write the cached values
|
||||
CLONE_VM isn't set, i.e. it's a fork-like clone with a new
|
||||
address space. In that case we update the cached values
|
||||
from the true system pid (retrieved via __NR_getpid syscall). */
|
||||
#ifdef __tilegx__
|
||||
{
|
||||
moveli r0, hw1_last(CLONE_VM)
|
||||
moveli r1, hw1_last(CLONE_THREAD)
|
||||
}
|
||||
{
|
||||
shl16insli r0, r0, hw0(CLONE_VM)
|
||||
shl16insli r1, r1, hw0(CLONE_THREAD)
|
||||
}
|
||||
#else
|
||||
{
|
||||
moveli r0, lo16(CLONE_VM)
|
||||
moveli r1, lo16(CLONE_THREAD)
|
||||
}
|
||||
{
|
||||
auli r0, r0, ha16(CLONE_VM)
|
||||
auli r1, r1, ha16(CLONE_THREAD)
|
||||
}
|
||||
#endif
|
||||
{
|
||||
and r0, r30, r0
|
||||
and r1, r30, r1
|
||||
}
|
||||
BNEZ r1, .Lno_reset_pid /* CLONE_THREAD is set */
|
||||
{
|
||||
movei r0, -1
|
||||
BNEZ r0, .Lgotpid /* CLONE_VM is set */
|
||||
}
|
||||
moveli r0, CLONE_VM
|
||||
and r0, r30, r0
|
||||
BNEZ r0, .Lno_reset_pid /* CLONE_VM is set */
|
||||
moveli TREG_SYSCALL_NR_NAME, __NR_getpid
|
||||
swint1
|
||||
.Lgotpid:
|
||||
ADDLI_PTR r2, tp, PID_OFFSET
|
||||
{
|
||||
ST4 r2, r0
|
||||
|
|
|
|||
178
sysdeps/unix/sysv/linux/tst-clone2.c
Normal file
178
sysdeps/unix/sysv/linux/tst-clone2.c
Normal file
|
|
@ -0,0 +1,178 @@
|
|||
/* Test if CLONE_VM does not change pthread pid/tid field (BZ #19957)
|
||||
Copyright (C) 2016 Free Software Foundation, Inc.
|
||||
This file is part of the GNU C Library.
|
||||
|
||||
The GNU C Library is free software; you can redistribute it and/or
|
||||
modify it under the terms of the GNU Lesser General Public
|
||||
License as published by the Free Software Foundation; either
|
||||
version 2.1 of the License, or (at your option) any later version.
|
||||
|
||||
The GNU C Library is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
||||
Lesser General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU Lesser General Public
|
||||
License along with the GNU C Library; if not, see
|
||||
<http://www.gnu.org/licenses/>. */
|
||||
|
||||
#include <sched.h>
|
||||
#include <signal.h>
|
||||
#include <string.h>
|
||||
#include <stdio.h>
|
||||
#include <fcntl.h>
|
||||
#include <unistd.h>
|
||||
#include <stddef.h>
|
||||
#include <stdbool.h>
|
||||
#include <stdint.h>
|
||||
#include <stdlib.h>
|
||||
#include <sys/types.h>
|
||||
#include <sys/wait.h>
|
||||
|
||||
#include <tls.h> /* for THREAD_* macros. */
|
||||
|
||||
static int sig;
|
||||
static int pipefd[2];
|
||||
|
||||
static int
|
||||
f (void *a)
|
||||
{
|
||||
close (pipefd[0]);
|
||||
|
||||
pid_t pid = THREAD_GETMEM (THREAD_SELF, pid);
|
||||
pid_t tid = THREAD_GETMEM (THREAD_SELF, tid);
|
||||
|
||||
while (write (pipefd[1], &pid, sizeof pid) < 0)
|
||||
continue;
|
||||
while (write (pipefd[1], &tid, sizeof tid) < 0)
|
||||
continue;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
||||
static int
|
||||
clone_test (int clone_flags)
|
||||
{
|
||||
sig = SIGRTMIN;
|
||||
sigset_t ss;
|
||||
sigemptyset (&ss);
|
||||
sigaddset (&ss, sig);
|
||||
if (sigprocmask (SIG_BLOCK, &ss, NULL) != 0)
|
||||
{
|
||||
printf ("sigprocmask failed: %m\n");
|
||||
return 1;
|
||||
}
|
||||
|
||||
if (pipe2 (pipefd, O_CLOEXEC))
|
||||
{
|
||||
printf ("sigprocmask failed: %m\n");
|
||||
return 1;
|
||||
}
|
||||
|
||||
pid_t ppid = getpid ();
|
||||
|
||||
#ifdef __ia64__
|
||||
extern int __clone2 (int (*__fn) (void *__arg), void *__child_stack_base,
|
||||
size_t __child_stack_size, int __flags,
|
||||
void *__arg, ...);
|
||||
char st[256 * 1024] __attribute__ ((aligned));
|
||||
pid_t p = __clone2 (f, st, sizeof (st), clone_flags, 0);
|
||||
#else
|
||||
char st[128 * 1024] __attribute__ ((aligned));
|
||||
#if _STACK_GROWS_DOWN
|
||||
pid_t p = clone (f, st + sizeof (st), clone_flags, 0);
|
||||
#elif _STACK_GROWS_UP
|
||||
pid_t p = clone (f, st, clone_flags, 0);
|
||||
#else
|
||||
#error "Define either _STACK_GROWS_DOWN or _STACK_GROWS_UP"
|
||||
#endif
|
||||
#endif
|
||||
close (pipefd[1]);
|
||||
|
||||
if (p == -1)
|
||||
{
|
||||
printf ("clone failed: %m\n");
|
||||
return 1;
|
||||
}
|
||||
|
||||
pid_t pid, tid;
|
||||
if (read (pipefd[0], &pid, sizeof pid) != sizeof pid)
|
||||
{
|
||||
printf ("read pid failed: %m\n");
|
||||
kill (p, SIGKILL);
|
||||
return 1;
|
||||
}
|
||||
if (read (pipefd[0], &tid, sizeof tid) != sizeof tid)
|
||||
{
|
||||
printf ("read pid failed: %m\n");
|
||||
kill (p, SIGKILL);
|
||||
return 1;
|
||||
}
|
||||
|
||||
close (pipefd[0]);
|
||||
|
||||
int ret = 0;
|
||||
|
||||
/* For CLONE_VM glibc clone implementation does not change the pthread
|
||||
pid/tid field. */
|
||||
if ((clone_flags & CLONE_VM) == CLONE_VM)
|
||||
{
|
||||
if ((ppid != pid) || (ppid != tid))
|
||||
{
|
||||
printf ("parent pid (%i) != received pid/tid (%i/%i)\n",
|
||||
(int)ppid, (int)pid, (int)tid);
|
||||
ret = 1;
|
||||
}
|
||||
}
|
||||
/* For any other flag clone updates the new pthread pid and tid with
|
||||
the clone return value. */
|
||||
else
|
||||
{
|
||||
if ((p != pid) || (p != tid))
|
||||
{
|
||||
printf ("child pid (%i) != received pid/tid (%i/%i)\n",
|
||||
(int)p, (int)pid, (int)tid);
|
||||
ret = 1;
|
||||
}
|
||||
}
|
||||
|
||||
int e;
|
||||
if (waitpid (p, &e, __WCLONE) != p)
|
||||
{
|
||||
puts ("waitpid failed");
|
||||
kill (p, SIGKILL);
|
||||
return 1;
|
||||
}
|
||||
if (!WIFEXITED (e))
|
||||
{
|
||||
if (WIFSIGNALED (e))
|
||||
printf ("died from signal %s\n", strsignal (WTERMSIG (e)));
|
||||
else
|
||||
puts ("did not terminate correctly");
|
||||
return 1;
|
||||
}
|
||||
if (WEXITSTATUS (e) != 0)
|
||||
{
|
||||
printf ("exit code %d\n", WEXITSTATUS (e));
|
||||
return 1;
|
||||
}
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
int
|
||||
do_test (void)
|
||||
{
|
||||
/* First, check that the clone implementation, without any flag, updates
|
||||
the struct pthread to contain the new PID and TID. */
|
||||
int ret = clone_test (0);
|
||||
/* Second, check that with CLONE_VM the struct pthread PID and TID fields
|
||||
remain unmodified after the clone. Any modifications would cause problem
|
||||
for the parent as described in bug 19957. */
|
||||
ret += clone_test (CLONE_VM);
|
||||
return ret;
|
||||
}
|
||||
|
||||
#define TEST_FUNCTION do_test ()
|
||||
#include "../test-skeleton.c"
|
||||
|
|
@ -1,2 +0,0 @@
|
|||
#define TEST_CLONE_FLAGS CLONE_VM
|
||||
#include "tst-getpid1.c"
|
||||
|
|
@ -24,7 +24,6 @@
|
|||
#include <asm-syntax.h>
|
||||
|
||||
#define CLONE_VM 0x00000100
|
||||
#define CLONE_THREAD 0x00010000
|
||||
|
||||
/* The userland implementation is:
|
||||
int clone (int (*fn)(void *arg), void *child_stack, int flags, void *arg),
|
||||
|
|
@ -92,14 +91,11 @@ L(thread_start):
|
|||
the outermost frame obviously. */
|
||||
xorl %ebp, %ebp
|
||||
|
||||
testq $CLONE_THREAD, %rdi
|
||||
andq $CLONE_VM, %rdi
|
||||
jne 1f
|
||||
testq $CLONE_VM, %rdi
|
||||
movl $-1, %eax
|
||||
jne 2f
|
||||
movl $SYS_ify(getpid), %eax
|
||||
syscall
|
||||
2: movl %eax, %fs:PID
|
||||
movl %eax, %fs:PID
|
||||
movl %eax, %fs:TID
|
||||
1:
|
||||
|
||||
|
|
|
|||
Loading…
Reference in a new issue