I used these shell commands:
../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 7061 files FOO.
I then removed trailing white space from math/tgmath.h,
support/tst-support-open-dev-null-range.c, and
sysdeps/x86_64/multiarch/strlen-vec.S, to work around the following
obscure pre-commit check failure diagnostics from Savannah. I don't
know why I run into these diagnostics whereas others evidently do not.
remote: *** 912-#endif
remote: *** 913:
remote: *** 914-
remote: *** error: lines with trailing whitespace found
...
remote: *** error: sysdeps/unix/sysv/linux/statx_cp.c: trailing lines
I (and maybe one or two others) added a (C) to the copyright notice
regardless of the contribution checklist[1] not mentioning it. Fix all
these instances so that the notice reads as "Copyright The GNU Toolchain
Authors" across the source code.
[1] https://sourceware.org/glibc/wiki/Contribution%20checklist
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Bugfix 27256 has introduced another issue:
In conversion from ISO-2022-JP-3 encoding, it is possible
to force iconv to emit extra NUL character on internal state reset.
To do this, it is sufficient to feed iconv with escape sequence
which switches active character set.
The simplified check 'data->__statep->__count != ASCII_set'
introduced by the aforementioned bugfix picks that case and
behaves as if '\0' character has been queued thus emitting it.
To eliminate this issue, these steps are taken:
* Restore original condition
'(data->__statep->__count & ~7) != ASCII_set'.
It is necessary since bits 0-2 may contain
number of buffered input characters.
* Check that queued character is not NUL.
Similar step is taken for main conversion loop.
Bundled test case follows following logic:
* Try to convert ISO-2022-JP-3 escape sequence
switching active character set
* Reset internal state by providing NULL as input buffer
* Ensure that nothing has been converted.
Signed-off-by: Nikita Popov <npv1310@gmail.com>
Remove all malloc hook uses from core malloc functions and move it
into a new library libc_malloc_debug.so. With this, the hooks now no
longer have any effect on the core library.
libc_malloc_debug.so is a malloc interposer that needs to be preloaded
to get hooks functionality back so that the debugging features that
depend on the hooks, i.e. malloc-check, mcheck and mtrace work again.
Without the preloaded DSO these debugging features will be nops.
These features will be ported away from hooks in subsequent patches.
Similarly, legacy applications that need hooks functionality need to
preload libc_malloc_debug.so.
The symbols exported by libc_malloc_debug.so are maintained at exactly
the same version as libc.so.
Finally, static binaries will no longer be able to use malloc
debugging features since they cannot preload the debugging DSO.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reinstate gconv-modules as the main file so that the configuration
files in gconv-modules.d/ become add-on configuration. With this, the
effective user visible change is that GCONV_PATH can now have
supplementary configuration in GCONV_PATH/gconv-modules.d/ in addition
to the main GCONV_PATH/gconv-modules file.
Split module configuration so that only the bare minimum charsets,
i.e. ANSI_X3.110, ISO8859-15, ISO8859-1, CP1252, UNICODE, UTF-16,
UTF-32 and UTF-7 are configured in gconv-modules.conf. The remaining
module configurations are now in gconv-modules-extra.conf.
Reviewed-by: DJ Delorie <dj@redhat.com>
Move all gconv-modules configuration files to gconv-modules.conf.
That is, the S390 extensions now become gconv-modules-s390.conf. Move
both configuration files into gconv-modules.d.
Now GCONV_PATH/gconv-modules is read only for backward compatibility
for third-party gconv modules directories.
Reviewed-by: DJ Delorie <dj@redhat.com>
This commit removes the ELF constructor and internal variables from
dlfcn/dlfcn.c. The file now serves the same purpose as
nptl/libpthread-compat.c, so it is renamed to dlfcn/libdl-compat.c.
The use of libdl-shared-only-routines ensures that libdl.a is empty.
This commit adjusts the test suite not to use $(libdl). The libdl.so
symbolic link is no longer installed.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The conversion loop to the internal encoding does not follow
the interface contract that __GCONV_FULL_OUTPUT is only returned
after the internal wchar_t buffer has been filled completely. This
is enforced by the first of the two asserts in iconv/skeleton.c:
/* We must run out of output buffer space in this
rerun. */
assert (outbuf == outerr);
assert (nstatus == __GCONV_FULL_OUTPUT);
This commit solves this issue by queuing a second wide character
which cannot be written immediately in the state variable, like
other converters already do (e.g., BIG5-HKSCS or TSCII).
Reported-by: Tavis Ormandy <taviso@gmail.com>
I used these shell commands:
../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 6694 files FOO.
I then removed trailing white space from benchtests/bench-pthread-locks.c
and iconvdata/tst-iconv-big5-hkscs-to-2ucs4.c, to work around this
diagnostic from Savannah:
remote: *** pre-commit check failed ...
remote: *** error: lines with trailing whitespace found
remote: error: hook declined to update refs/heads/master
The byte 0xfe as input to the EUC-KR conversion denotes a user-defined
area and is not allowed. The from_euc_kr function used to skip two bytes
when told to skip over the unknown designation, potentially running over
the buffer end.
An input BIG5-HKSCS character may be converted into at most 2 wchar_t
characters. After outputting the second whcar_t character (which was
saved in the converter state) we must reset the state. If we fail
to reset the state we will be stuck continually copying that
character to the output even if we have further input to consider.
We add a new test case that covers the 4 BIG5-HKSCS characters
that may become 2 wchar_t characters.
Reviewed-by: Tom Honermann <tom@honermann.net>
This code page is identical to code page 850 except that X'D5'
has been changed from LI61 (dotless i) to SC20 (euro symbol).
The code points from /x01 to /x1f in the /localedata/charmaps/IBM858
file have the same mapping as those in localedata/charmaps/ANSI_X3.4-1968.
That means they disagree with with
ftp://ftp.software.ibm.com/software/globalization/gcoc/attachments/CP00858.txt
in that range.
For example, localedata/charmaps/IBM858 and localedata/charmaps/ANSI_X3.4-1968 have:
“<U0001> /x01 START OF HEADING (SOH)”
whereas CP00858.txt has:
“01 SS000000 Smiling Face”
That means that CP00858.txt is not really ASCII-compatible and to make
it ASCII-compatible we deviate fro CP00858.txt in the code points from /x01
to /x1f.
[BZ #21084]
* benchtests/strcoll-inputs/filelist#en_US.UTF-8: Add IBM858 and ibm858.c.
* iconvdata/Makefile: Add IBM858.
* iconvdata/gconv-modules: Add IBM858.
* iconvdata/ibm858.c: New file.
* iconvdata/tst-tables.sh: Add IBM858
* localedata/charmaps/IBM858: New file.
cppflags-iterator.mk no longer has anything to do with CPPFLAGS; all
it does is set libof-$(foo) for a list of files. extra-modules.mk
does the same thing, but with a different input variable, and doesn't
let the caller control the module. Therefore, this patch gives
cppflags-iterator.mk a better name, removes extra-modules.mk, and
updates all uses of both.
* extra-modules.mk: Delete file.
* cppflags-iterator.mk: Rename to ...
* libof-iterator.mk: ...this. Adjust comments.
* Makerules, extra-lib.mk, benchtests/Makefile, elf/Makefile
* elf/rtld-Rules, iconv/Makefile, locale/Makefile, malloc/Makefile
* nscd/Makefile, sunrpc/Makefile, sysdeps/s390/Makefile:
Use libof-iterator.mk instead of cppflags-iterator.mk or
extra-modules.mk.
* benchtests/strcoll-inputs/filelist#en_US.UTF-8: Remove
extra-modules.mk and cppflags-iterator.mk, add libof-iterator.mk.
According to the latest Unicode standard, a conversion from/to UTF-xx has
to report an error if the character value is in range of an utf16 surrogate
(0xd800..0xdfff). See https://sourceware.org/ml/libc-help/2015-12/msg00015.html.
Thus this patch fixes this behaviour for converting from utf32 to internal and
from internal to utf8.
Furthermore the conversion from utf16 to internal does not report an error if the
input-stream consists of two low-surrogate values. If an uint16_t value is in the
range of 0xd800 .. 0xdfff, the next uint16_t value is checked, if it is in the
range of a low surrogate (0xdc00 .. 0xdfff). Afterwards these two uint16_t
values are interpreted as a high- and low-surrogates pair. But there is no test
if the first uint16_t value is really in the range of a high-surrogate
(0xd800 .. 0xdbff). If there would be two uint16_t values in the range of a low
surrogate, then they will be treated as a valid high- and low-surrogates pair.
This patch adds this test.
This patch also adds a new testcase, which checks UTF conversions with input
values in range of UTF16 surrogates. The test converts from UTF-xx to INTERNAL,
INTERNAL to UTF-xx and directly between UTF-xx to UTF-yy. The latter conversion
is needed because s390 has iconv-modules, which converts from/to UTF in one step.
The new testcase was tested on a s390, power and intel machine.
ChangeLog:
[BZ #19727]
* iconvdata/utf-16.c (BODY): Report an error if first word is not a
valid high surrogate.
* iconvdata/utf-32.c (BODY): Report an error if the value is in range
of an utf16 surrogate.
* iconv/gconv_simple.c (BODY): Likewise.
* iconvdata/bug-iconv12.c: New file.
* iconvdata/Makefile (tests): Add bug-iconv12.
rename test
This patch introduces a way to provide an architecture dependent gconv-modules
file. Before this patch, the gconv-modules file was normally installed from
src-dir/iconvdata/gconv-modules. The S390 Makefile had overridden the
installation recipe (with a make warning) in order to install the
gconv-module-s390 file from build-dir.
The iconvdata/Makefile provides another recipe, which copies the gconv-modules
file from src to build dir, which are used by the testcases.
Thus the testcases does not use the currently build s390-modules.
This patch uses build-dir/iconvdata/gconv-modules for installation, which
is generated by concatenating src-dir/iconvdata/gconv-modules and the
architecture specific one. The latter one can be specified by setting the variable
sysdeps-gconv-modules in sysdeps/.../Makefile.
The architecture specific gconv-modules file is emitted before the common one
because these modules aren't used in all possible conversions. E.g. the converting
from INTERNAL to UTF-16 used the common UTF-16.so module instead of UTF16_UTF32_Z9.so.
This way, the s390-Makefile does not need to override the recipe for gconv-modules
and no warning is emitted anymore.
Since we no longer support empty objpfx the conditional test in iconvdata/Makefile
is removed.
ChangeLog:
* iconvdata/Makefile ($(inst_gconvdir)/gconv-modules):
Install file from $(objpfx)gconv-modules.
($(objpfx)gconv-modules): Concatenate architecture specific file
in variable sysdeps-gconv-modules and gconv-modules in src dir.
* sysdeps/s390/gconv-modules: New file.
* sysdeps/s390/s390-64/Makefile: ($(inst_gconvdir)/gconv-modules):
Deleted.
($(objpfx)gconv-modules-s390): Deleted.
(sysdeps-gconv-modules): New variable.
IBM907, and IBM909.
Patch for bug #17197 changes the encoder to avoid generating redundant
shift sequences. However, those sequences may already be present in
data encododed by prior versions of the encoder. This change modifies
the decoder to also avoid rejecting redundant shift sequences.
[BZ #19432]
* iconvdata/Makefile: Add bug-iconv11.
* iconvdata/bug-iconv11.c: New test.
* iconvdata/ibm930.c: Do not reject redundant shift sequences.
* iconvdata/ibm933.c: Same.
* iconvdata/ibm935.c: Same.
* iconvdata/ibm937.c: Same.
* iconvdata/ibm939.c: Same.
The current scheme to identify which module a translation unit is
built in depends on defining multiple macros IS_IN_* and also defining
NOT_IN_libc if we're building a non-libc module. In addition, there
is an IN_LIB macro that does effectively the same thing, but for
different modules (notably the systemtap probes). This macro scheme
unifies both ideas to use just one macro IN_MODULE and assign it a
value depending on the module it is being built into. If the module
is not defined, it defaults to MODULE_libc.
Patches that follow will replace uses of IS_IN_* variables with the
IS_IN() macro. libc-symbols.h has been converted already to give an
example of how such a transition will look.
Verified that there are no relevant binary changes. One source change
that will crop up repeatedly is that of nscd_stat, since it uses the
build timestamp as a constant in its logic.
* Makeconfig (in-module): Get value of libof set for the
translation unit.
(CPPFLAGS): Use $(in-module).
* Makerules: Don't suffix routine names for nonlib.
* include/libc-modules.h: New file.
* include/libc-symbols.h: Include libc-modules.h
(IS_IN): New macro to replace IS_IN_* macros.
* elf/Makefile: Set libof-* for each routine.
* elf/rtld-Rules: Likewise.
* extra-modules.mk: Likewise.
* iconv/Makefile: Likewise.
* iconvdata/Makefile: Likewise.
* locale/Makefile: Likewise.
* malloc/Makefile: Likewise.
* nss/Makefile: Likewise.
* sysdeps/gnu/Makefile: Likewise.
* sysdeps/ieee754/ldbl-opt/Makefile: Likewise.
* sysdeps/unix/sysv/linux/Makefile: Likewise.
* sysdeps/s390/s390-64/Makefile: Likewise.
* nscd/Makefile: Set libof-* for each routine. Set CFLAGS and
CPPFLAGS for nscd instead of nonlib.
The glibc makefiles have a standard variable, $(rtld-prefix), to run
the dynamic linker with a default --library-path option; this is used
as the basis of lots of other variables for running programs compiled
with the newly built library.
A few places however use $(elf-objpfx)ld.so or
$(elf-objpfx)${rtld-installed-name} directly, with such a
--library-path option. This patch makes such places use
$(rtld-prefix) instead. I'm not aware of any significance in these
cases to the choice of ld.so or ${rtld-installed-name} when running
the dynamic linker, or to whether $(patsubst
%,:%,$(sysdep-library-path)) is included in the library-path as it is
in $(rtld-prefix) and just one of the places being changed.
Tested x86_64.
* elf/Makefile ($(objpfx)tst-unused-dep.out): Use $(rtld-prefix).
* iconvdata/Makefile ($(inst_gconvdir)/gconv-modules)
[$(cross-compiling) = no]: Likewise.
* sysdeps/s390/s390-64/Makefile ($(inst_gconvdir)/gconv-modules)
[$(cross-compiling) = no]: Likewise.
localedata/ChangeLog:
* Makefile (LOCALEDEF): Use $(rtld-prefix).
Various glibc build / install / test code has C locale settings that
are redundant with LC_ALL=C.
LC_ALL takes precedence over LANG, so anywhere that sets LC_ALL=C
(explicitly, or through it being in the default environment for
running tests) does not need to set LANG=C. LC_ALL=C also takes
precedence over LANGUAGE, since
2001-01-02 Ulrich Drepper <drepper@redhat.com>
* intl/dcigettext.c (guess_category_value): Rewrite so that LANGUAGE
value is ignored if the selected locale is the C locale.
* intl/tst-gettext.c: Set locale for above change.
* intl/tst-translit.c: Likewise.
and so settings of LANGUAGE=C are also redundant when LC_ALL=C is
set. One test also had LC_ALL=C in its -ENV setting, although it's
part of the default environment used for tests.
This patch removes the redundant settings. It removes a suggestion in
install.texi of setting LANGUAGE=C LC_ALL=C for "make install"; the
Makefile.in target "install" already sets LC_ALL_C so there's no need
for the user to set it (and nor should there be any need for the user
to set it).
If some build machine tool used by "make install" uses a version of
libintl predating that 2001 change, and the user has LANGUAGE set, the
removal of LANGUAGE=C from the Makefile.in "install" rule could in
principle affect the user's installation. However, I don't think we
need to be concerned about pre-2001 build tools.
Tested x86_64.
* Makefile (install): Don't set LANGUAGE.
* Makefile.in (install): Likewise.
* assert/Makefile (test-assert-ENV): Remove variable.
(test-assert-perr-ENV): Likewise.
* elf/Makefile (neededtest4-ENV): Likewise.
* iconvdata/Makefile ($(inst_gconvdir)/gconv-modules)
[$(cross-compiling) = no]: Don't set LANGUAGE.
* io/ftwtest-sh (LANG): Remove variable.
* libio/Makefile (tst-widetext-ENV): Likewise.
* manual/install.texi (Running make install): Don't refer to
environment settings for make install.
* INSTALL: Regenerated.
* nptl/tst-tls6.sh: Don't set LANG.
* posix/globtest.sh (LANG): Remove variable.
* string/Makefile (tester-ENV): Likewise.
(inl-tester-ENV): Likewise.
(noinl-tester-ENV): Likewise.
* sysdeps/s390/s390-64/Makefile ($(inst_gconvdir)/gconv-modules)
[$(cross-compiling) = no]: Don't set LANGUAGE.
* timezone/Makefile (build-testdata): Use $(built-program-cmd)
without explicit environment settings.
localedata/ChangeLog:
* tst-fmon.sh: Don't set LANGUAGE.
* tst-locale.sh: Likewise.
One wart in the original support for test wrappers for cross testing,
as noted in
<https://sourceware.org/ml/libc-alpha/2012-10/msg00722.html>, is the
requirement for test wrappers to pass a poorly-defined set of
environment variables from the build system to the system running the
glibc under test. Although some variables are passed explicitly via
$(test-wrapper-env), including LD_* variables that simply can't be
passed implicitly because of the side effects they'd have on the build
system's dynamic linker, others are passed implicitly, including
variables such as GCONV_PATH and LOCPATH that could potentially affect
the build system's libc (so effectively relying on any such effects
not breaking the wrappers). In addition, the code in
cross-test-ssh.sh for preserving environment variables is fragile (it
depends on how bash formats a list of exported variables, and could
well break for multi-line variable definitions where the contents
contain things looking like other variable definitions).
This patch moves to explicitly passing environment variables via
$(test-wrapper-env). Makefile variables that previously used
$(test-wrapper) are split up into -before-env and -after-env parts
that can be passed separately to the various .sh files used in
testing, so those files can then insert environment settings between
the two parts.
The common default environment settings in make-test-out are made into
a separate makefile variable that can also be passed to scripts,
rather than many scripts duplicating those settings (for testing an
installed glibc, it is desirable to have the GCONV_PATH setting on
just one place, so just that one place needs to support it pointing to
an installed sysroot instead of the build tree). The default settings
are included in the variables such as $(test-program-prefix), so that
if tests do not need any non-default settings they can continue to use
single variables rather than the split-up variables.
Although this patch cleans up LC_ALL=C settings (that being part of
the common defaults), various LANG=C and LANGUAGE=C settings remain.
Those are generally unnecessary and I propose a subsequent cleanup to
remove them. LC_ALL takes precedence over LANG, and while LANGUAGE
takes precedence over LC_ALL, it only does so for settings other than
LC_ALL=C. So LC_ALL=C on its own is sufficient to ensure the C
locale, and anything that gets LC_ALL=C does not need the other
settings.
While preparing this patch I noticed some tests with .sh files that
appeared to do nothing beyond what the generic makefile support for
tests can do (localedata/tst-wctype.sh - the makefiles support -ENV
variables and .input files - and localedata/tst-mbswcs.sh - just runs
five tests that could be run individually from the makefile). So I
propose another subsequent cleanup to move those to using the generic
support instead of special .sh files.
Tested x86_64 (native) and powerpc32 (cross).
* Makeconfig (run-program-env): New variable.
(run-program-prefix-before-env): Likewise.
(run-program-prefix-after-env): Likewise.
(run-program-prefix): Define in terms of new variables.
(built-program-cmd-before-env): New variable.
(built-program-cmd-after-env): Likewise.
(built-program-cmd): Define in terms of new variables.
(test-program-prefix-before-env): New variable.
(test-program-prefix-after-env): Likewise.
(test-program-prefix): Define in terms of new variables.
(test-program-cmd-before-env): New variable.
(test-program-cmd-after-env): Likewise.
(test-program-cmd): Define in terms of new variables.
* Rules (make-test-out): Use $(run-program-env).
* scripts/cross-test-ssh.sh (env_blacklist): Remove variable.
(help): Do not mention environment variables. Mention
--timeoutfactor option.
(timeoutfactor): New variable.
(blacklist_exports): Remove function.
(exports): Remove variable.
(command): Do not include ${exports}.
* manual/install.texi (Configuring and compiling): Do not mention
test wrappers preserving environment variables. Mention that last
assignment to a variable must take precedence.
* INSTALL: Regenerated.
* benchtests/Makefile (run-bench): Use $(run-program-env).
* catgets/Makefile ($(objpfx)test1.cat): Use
$(built-program-cmd-before-env), $(run-program-env) and
$(built-program-cmd-after-env).
($(objpfx)test2.cat): Do not specify environment variables
explicitly.
($(objpfx)de/libc.cat): Use $(built-program-cmd-before-env),
$(run-program-env) and $(built-program-cmd-after-env).
($(objpfx)test-gencat.out): Use $(test-program-cmd-before-env),
$(run-program-env) and $(test-program-cmd-after-env).
($(objpfx)sample.SJIS.cat): Do not specify environment variables
explicitly.
* catgets/test-gencat.sh: Use test_program_cmd_before_env,
run_program_env and test_program_cmd_after_env arguments.
* elf/Makefile ($(objpfx)tst-pathopt.out): Use $(run-program-env).
* elf/tst-pathopt.sh: Use run_program_env argument.
* iconvdata/Makefile ($(objpfx)iconv-test.out): Use
$(test-wrapper-env) and $(run-program-env).
* iconvdata/run-iconv-test.sh: Use test_wrapper_env and
run_program_env arguments.
* iconvdata/tst-table.sh: Do not set GCONV_PATH explicitly.
* intl/Makefile ($(objpfx)tst-gettext.out): Use
$(test-program-prefix-before-env), $(run-program-env) and
$(test-program-prefix-after-env).
($(objpfx)tst-gettext2.out): Likewise.
* intl/tst-gettext.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
* intl/tst-gettext2.sh: Likewise.
* intl/tst-gettext4.sh: Do not set environment variables
explicitly.
* intl/tst-gettext6.sh: Likewise.
* intl/tst-translit.sh: Likewise.
* malloc/Makefile ($(objpfx)tst-mtrace.out): Use
$(test-program-prefix-before-env), $(run-program-env) and
$(test-program-prefix-after-env).
* malloc/tst-mtrace.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
* math/Makefile (run-regen-ulps): Use $(run-program-env).
* nptl/Makefile ($(objpfx)tst-tls6.out): Use $(run-program-env).
* nptl/tst-tls6.sh: Use run_program_env argument. Set LANG=C
explicitly with each use of ${test_wrapper_env}.
* posix/Makefile ($(objpfx)wordexp-tst.out): Use
$(test-program-prefix-before-env), $(run-program-env) and
$(test-program-prefix-after-env).
* posix/tst-getconf.sh: Do not set environment variables
explicitly.
* posix/wordexp-tst.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
* stdio-common/tst-printf.sh: Do not set environment variables
explicitly.
* stdlib/Makefile ($(objpfx)tst-fmtmsg.out): Use
$(test-program-prefix-before-env), $(run-program-env) and
$(test-program-prefix-after-env).
* stdlib/tst-fmtmsg.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
Split $test calls into $test_pre and $test.
* timezone/Makefile (build-testdata): Use
$(built-program-cmd-before-env), $(run-program-env) and
$(built-program-cmd-after-env).
localedata/ChangeLog:
* Makefile ($(addprefix $(objpfx),$(CTYPE_FILES))): Use
$(built-program-cmd-before-env), $(run-program-env) and
$(built-program-cmd-after-env).
($(objpfx)sort-test.out): Use $(test-program-prefix-before-env),
$(run-program-env) and $(test-program-prefix-after-env).
($(objpfx)tst-fmon.out): Use $(run-program-prefix-before-env),
$(run-program-env) and $(run-program-prefix-after-env).
($(objpfx)tst-locale.out): Use $(built-program-cmd-before-env),
$(run-program-env) and $(built-program-cmd-after-env).
($(objpfx)tst-trans.out): Use $(run-program-prefix-before-env),
$(run-program-env), $(run-program-prefix-after-env),
$(test-program-prefix-before-env) and
$(test-program-prefix-after-env).
($(objpfx)tst-ctype.out): Use $(test-program-cmd-before-env),
$(run-program-env) and $(test-program-cmd-after-env).
($(objpfx)tst-wctype.out): Likewise.
($(objpfx)tst-langinfo.out): Likewise.
($(objpfx)tst-langinfo-static.out): Likewise.
* gen-locale.sh: Use localedef_before_env, run_program_env and
localedef_after_env arguments.
* sort-test.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
* tst-ctype.sh: Use tst_ctype_before_env, run_program_env and
tst_ctype_after_env arguments.
* tst-fmon.sh: Use run_program_prefix_before_env, run_program_env
and run_program_prefix_after_env arguments.
* tst-langinfo.sh: Use tst_langinfo_before_env, run_program_env
and tst_langinfo_after_env arguments.
* tst-locale.sh: Use localedef_before_env, run_program_env and
localedef_after_env arguments.
* tst-mbswcs.sh: Do not set environment variables explicitly.
* tst-numeric.sh: Likewise.
* tst-rpmatch.sh: Likewise.
* tst-trans.sh: Use run_program_prefix_before_env,
run_program_env, run_program_prefix_after_env,
test_program_prefix_before_env and test_program_prefix_after_env
arguments.
* tst-wctype.sh: Use tst_wctype_before_env, run_program_env and
tst_wctype_after_env arguments.
Tests run using the default $(make-test-out) automatically get
GCONV_PATH and LC_ALL set, whether or not those environment variables
are actually needed for the individual test. However, they do not get
LOCPATH set, meaning that a large number of tests have -ENV settings
just to set LOCPATH.
This patch moves LOCPATH into the default environment used for all
tests, on the principle that like GCONV_PATH any settings needed to
use files associated with the newly built library, rather than any old
installed files, are appropriate to use by default.
A further motivation is that various tests using .sh files also set
some combination of LC_ALL, GCONV_PATH and LOCPATH. Preferably .sh
files should also use the default environment with any additions
required for the individual test. Now, it was suggested in
<https://sourceware.org/ml/libc-alpha/2014-05/msg00715.html> that
various Makefile variables used in testing should be derived by
composing the -before-env and -after-env variables used when explicit
environment settings are required. With such a change, it's also
natural for those variables to include the default settings (via some
intermediate makefile variable also used in make-test-out).
Because some .sh files only set variables that correspond to the
default settings, or a subset thereof, and this applies to more of the
.sh files once LOCPATH is in the default settings, doing so reduces
the size of a revised version of
<https://sourceware.org/ml/libc-alpha/2014-05/msg00596.html>: scripts
only needing the (expanded) default settings will not need to receive
the separate -before-env and -after-env variables, only the single
variable they do at present. So moving LOCPATH into the default
settings can reduce churn caused by subsequent patches.
Tested x86_64 and x86.
* Rules (make-test-out): Include
LOCPATH=$(common-objpfx)localedata in default environment.
* debug/Makefile (tst-chk1-ENV): Remove variable.
(tst-chk2-ENV): Likewise.
(tst-chk3-ENV): Likewise.
(tst-chk4-ENV): Likewise.
(tst-chk5-ENV): Likewise.
(tst-chk6-ENV): Likewise.
(tst-lfschk1-ENV): Likewise.
(tst-lfschk2-ENV): Likewise.
(tst-lfschk3-ENV): Likewise.
(tst-lfschk4-ENV): Likewise.
(tst-lfschk5-ENV): Likewise.
(tst-lfschk6-ENV): Likewise.
* iconvdata/Makefile (bug-iconv6-ENV): Likewise.
(tst-iconv7-ENV): Likewise.
* intl/Makefile (LOCPATH-ENV): Likewise.
(tst-codeset-ENV): Likewise.
(tst-gettext3-ENV): Likewise.
(tst-gettext5-ENV): Likewise.
* libio/Makefile (tst-widetext-ENV): Don't set LOCPATH.
(tst-fopenloc-ENV): Likewise.
(tst-fgetws-ENV): Remove variable.
(tst-ungetwc1-ENV): Likewise.
(tst-ungetwc2-ENV): Likewise.
(bug-ungetwc2-ENV): Likewise.
(tst-swscanf-ENV): Likewise.
(bug-ftell-ENV): Likewise.
(tst-fgetwc-ENV): Likewise.
(tst-fseek-ENV): Likewise.
(tst-ftell-partial-wide-ENV): Likewise.
(tst-ftell-active-handler-ENV): Likewise.
(tst-ftell-append-ENV): Likewise.
* posix/Makefile (tst-fnmatch-ENV): Likewise.
(tst-regexloc-ENV): Likewise.
(bug-regex1-ENV): Likewise.
(tst-regex-ENV): Likewise.
(tst-regex2-ENV): Likewise.
(bug-regex5-ENV): Likewise.
(bug-regex6-ENV): Likewise.
(bug-regex17-ENV): Likewise.
(bug-regex18-ENV): Likewise.
(bug-regex19-ENV): Likewise.
(bug-regex20-ENV): Likewise.
(bug-regex22-ENV): Likewise.
(bug-regex23-ENV): Likewise.
(bug-regex25-ENV): Likewise.
(bug-regex26-ENV): Likewise.
(bug-regex30-ENV): Likewise.
(bug-regex32-ENV): Likewise.
(bug-regex33-ENV): Likewise.
(bug-regex34-ENV): Likewise.
(bug-regex35-ENV): Likewise.
(tst-rxspencer-ENV): Likewise.
(tst-rxspencer-no-utf8-ENV): Likewise.
* stdio-common/Makefile (tst-sprintf-ENV): Likewise.
(tst-sscanf-ENV): Likewise.
(tst-swprintf-ENV): Likewise.
(tst-swscanf-ENV): Likewise.
(test-vfprintf-ENV): Likewise.
(scanf13-ENV): Likewise.
(bug14-ENV): Likewise.
(tst-grouping-ENV): Likewise.
* stdlib/Makefile (tst-strtod-ENV): Likewise.
(tst-strtod3-ENV): Likewise.
(tst-strtod4-ENV): Likewise.
(tst-strtod5-ENV): Likewise.
(testmb2-ENV): Likewise./
* string/Makefile (tst-strxfrm-ENV): Likewise.
(tst-strxfrm2-ENV): Likewise.
(bug-strcoll1-ENV): Likewise.
(test-strcasecmp-ENV): Likewise.
(test-strncasecmp-ENV): Likewise.
* time/Makefile (tst-strptime-ENV): Likewise.
(tst-ftime_l-ENV): Likewise.
* wcsmbs/Makefile (tst-btowc-ENV): Likewise.
(tst-mbrtowc-ENV): Likewise.
(tst-wcrtomb-ENV): Likewise.
(tst-mbrtowc2-ENV): Likewise.
(tst-c16c32-1-ENV): Likewise.
(tst-mbsnrtowcs-ENV): Likewise.
localedata/ChangeLog:
* Makefile (TEST_MBWC_ENV): Remove variable.
(tst_iswalnum-ENV): Likewise.
(tst_iswalpha-ENV): Likewise.
(tst_iswcntrl-ENV): Likewise.
(tst_iswctype-ENV): Likewise.
(tst_iswdigit-ENV): Likewise.
(tst_iswgraph-ENV): Likewise.
(tst_iswlower-ENV): Likewise.
(tst_iswprint-ENV): Likewise.
(tst_iswpunct-ENV): Likewise.
(tst_iswspace-ENV): Likewise.
(tst_iswupper-ENV): Likewise.
(tst_iswxdigit-ENV): Likewise.
(tst_mblen-ENV): Likewise.
(tst_mbrlen-ENV): Likewise.
(tst_mbrtowc-ENV): Likewise.
(tst_mbsrtowcs-ENV): Likewise.
(tst_mbstowcs-ENV): Likewise.
(tst_mbtowc-ENV): Likewise.
(tst_strcoll-ENV): Likewise.
(tst_strfmon-ENV): Likewise.
(tst_strxfrm-ENV): Likewise.
(tst_swscanf-ENV): Likewise.
(tst_towctrans-ENV): Likewise.
(tst_towlower-ENV): Likewise.
(tst_towupper-ENV): Likewise.
(tst_wcrtomb-ENV): Likewise.
(tst_wcscat-ENV): Likewise.
(tst_wcschr-ENV): Likewise.
(tst_wcscmp-ENV): Likewise.
(tst_wcscoll-ENV): Likewise.
(tst_wcscpy-ENV): Likewise.
(tst_wcscspn-ENV): Likewise.
(tst_wcslen-ENV): Likewise.
(tst_wcsncat-ENV): Likewise.
(tst_wcsncmp-ENV): Likewise.
(tst_wcsncpy-ENV): Likewise.
(tst_wcspbrk-ENV): Likewise.
(tst_wcsrtombs-ENV): Likewise.
(tst_wcsspn-ENV): Likewise.
(tst_wcsstr-ENV): Likewise.
(tst_wcstod-ENV): Likewise.
(tst_wcstok-ENV): Likewise.
(tst_wcstombs-ENV): Likewise.
(tst_wcswidth-ENV): Likewise.
(tst_wcsxfrm-ENV): Likewise.
(tst_wctob-ENV): Likewise.
(tst_wctomb-ENV): Likewise.
(tst_wctrans-ENV): Likewise.
(tst_wctype-ENV): Likewise.
(tst_wcwidth-ENV): Likewise.
(tst-digits-ENV): Likewise.
(tst-mbswcs6-ENV): Likewise.
(tst-xlocale1-ENV): Likewise.
(tst-xlocale2-ENV): Likewise.
(tst-strfmon1-ENV): Likewise.
(tst-strptime-ENV): Likewise.
(tst-setlocale-ENV): Don't set LOCPATH.
(bug-iconv-trans-ENV): Remove variable.
(tst-sscanf-ENV): Likewise.
(tst-leaks-ENV): Don't set LOCPATH.
(bug-setlocale1-ENV): Remove variable.
(bug-setlocale1-static-ENV): Likewise.
(tst-setlocale2-ENV): Likewise.
As previously noted
<https://sourceware.org/ml/libc-alpha/2013-05/msg00696.html>,
$(elf-objpfx) and $(elfobjdir) are redundant and should be
consolidated. This patch consolidates on $(elf-objpfx) (for
consistency with $(csu-objpfx)), also changing direct uses of
$(common-objpfx)elf/ to use $(elf-objpfx).
Tested x86_64, including that installed shared libraries are unchanged
by the patch.
* Makeconfig [$(build-hardcoded-path-in-tests) = yes]
(rtld-tests-LDFLAGS): Use $(elf-objpfx) instead of
$(common-objpfx)elf/.
(link-libc-before-gnulib): Likewise.
(elfobjdir): Remove variable.
* Makefile (install): Use $(elf-objpfx) instead of
$(common-objpfx)elf/.
* Makerules (link-libc-args): Use $(elf-objpfx) instead of
$(elfobjdir)/.
(link-libc-deps): Likewise.
($(common-objpfx)libc.so): Likewise.
($(common-objpfx)linkobj/libc.so): Likewise.
[$(cross-compiling) = no] (symbolic-link-prog): Use $(elf-objpfx)
instead of $(common-objpfx)elf/.
(symbolic-link-list): Likewise.
* iconvdata/Makefile ($(inst_gconvdir)/gconv-modules)
[$(cross-compiling) = no]: Likewise.
* sysdeps/arm/Makefile (gnulib-arch): Use $(elf-objpfx) instead of
$(elfobjdir)/.
(static-gnulib-arch): Likewise.
* sysdeps/s390/s390-64/Makefile ($(inst_gconvdir)/gconv-modules)
[$(cross-compiling) = no]: Use $(elf-objpfx) instead of
$(common-objpfx)elf/.
localedata/ChangeLog:
* Makefile (LOCALEDEF): Use $(elf-objpfx) instead of
$(common-objpfx)elf/.
This patch systematically renames miscellaneous tests so their outputs
use a *.out name (unless the test is just running some glibc program
with its conventional output file name, rather than a special program
at all, as in catgets tests generating *.cat). In the case of the
iconv test test-iconvconfig, output is redirected where it wasn't
before.
In various places the "generated" variable is updated to reflect the
revised test names; in iconvdata/Makefile a typo (mmtrace-tst-loading)
is also fixed. resolv/Makefile sets both "generate" (which appears
unused) and "generated". Bitrot in the settings of these variables
could no doubt be fixed so that "make clean" after build and testing
leaves results the same as after configure (and indeed the
tests-special / xtests-special variables could be used to simplify
things, by removing those files automatically rather than listing them
manually in these variables), and "make distclean" leaves an empty
build directory, but right now it appears various files don't get
deleted. I think they are liable to continue to bitrot in the absence
of routine testing that these targets actually work, given that
building in the source directory isn't supported and that was the main
use of such makefile targets.
Tested x86_64.
* elf/Makefile (tests-special): Rename tests to end with .out.
($(objpfx)noload-mem): Likewise.
($(objpfx)tst-leaks1-mem): Likewise.
($(objpfx)tst-leaks1-static-mem.out): Likewise.
* iconv/Makefile (xtests-special): Change test-iconvconfig to
$(objpfx)test-iconvconfig.out.
(test-iconvconfig): Change to $(objpfx)test-iconvconfig.out. Use
set -e inside subshell and redirect output to file.
* iconvdata/Makefile (generated): Rename tests to end with .out.
Correct type.
(tests-special): Rename tests to end with .out.
($(objpfx)mtrace-tst-loading): Likewise.
* intl/Makefile (generated): Likewise.
(tests-special): Likewise.
($(objpfx)mtrace-tst-gettext): Likewise.
* misc/Makefile (generated): Likewise.
(tests-special): Likewise.
($(objpfx)tst-error1-mem): Likewise.
* nptl/Makefile (tests-special): Likewise.
($(objpfx)tst-stack3-mem): Likewise.
(generated): Likewise.
* posix/Makefile (generated): Likewise.
(tests-special): Likewise.
(xtests-special): Likewise.
($(objpfx)tst-fnmatch-mem): Likewise.
($(objpfx)bug-regex2-mem): Likewise.
($(objpfx)bug-regex14-mem): Likewise.
($(objpfx)bug-regex21-mem): Likewise.
($(objpfx)bug-regex31-mem): Likewise.
($(objpfx)tst-vfork3-mem): Likewise.
($(objpfx)tst-rxspencer-no-utf8-mem): Likewise.
($(objpfx)tst-pcre-mem): Likewise.
($(objpfx)tst-boost-mem): Likewise.
($(objpfx)bug-ga2-mem): Likewise.
($(objpfx)bug-glob2-mem): Likewise.
* resolv/Makefile (generate): Likewise.
(tests-special): Likewise.
(xtests-special): Likewise.
(generated): Likewise.
($(objpfx)mtrace-tst-leaks): Likewise.
($(objpfx)mtrace-tst-leaks2): Likewise.
localedata:
* Makefile (generated): Rename tests to end with .out.
(tests-special): Likewise.
($(objpfx)mtrace-tst-leaks): Likewise.
This patch is a revised and updated version of
<https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html>.
In order to generate overall summaries of the results of all tests in
the glibc testsuite, we need to identify and concatenate the files
with the results of individual tests.
Tomas Dohnalek's patch used $(common-objpfx)*/*.test-result for this.
However, the normal glibc approach is explicit enumeration of the
expected set of files with a given property, rather than all files
matching some pattern like that. Furthermore, we would like to be
able to mark tests as UNRESOLVED if the file with their results is for
some reason missing, and in future we would like to be able to mark
tests as UNSUPPORTED if they are disabled for a particular
configuration (rather than simply having them missing from the list of
tests as at present). Such handling of tests that were not run or did
not record results requires an explicit enumeration of tests.
For the tests following the default makefile rules, $(tests) (and
$(xtests)) provides such an enumeration. Others, however, are added
directly as dependencies of the "tests" and "xtests" makefile
targets. This patch changes the makefiles to put them in variables
tests-special and xtests-special, with appropriate dependencies on the
tests listed there then being added centrally.
Those variables are used in Rules and so need to be set before Rules
is included in a subdirectory makefile, which is often earlier in the
makefile than the dependencies were present before. We previously
discussed the question of where to include Rules; see the question at
<https://sourceware.org/ml/libc-alpha/2012-11/msg00798.html>, and a
discussion in
<https://sourceware.org/ml/libc-alpha/2013-01/msg00337.html> of why
Rules is included early rather than late in subdirectory makefiles.
It was necessary to avoid an indirection through the check-abi target
and get the check-abi-* targets for individual libraries into the
tests-special variable. The intl/ test $(objpfx)tst-gettext.out,
previously built only because of dependencies from other tests, was
also added to tests-special for the same reason.
The entries in tests-special are the full makefile targets, complete
with $(objpfx) and .out. If a future change causes tests to be named
consistently with a .out suffix, this can be changed to include just
the path relative to $(objpfx), without .out.
Tested x86_64, including that the same set of files is generated in
the build directory by a build and testsuite run both before and after
the patch (except for changes to the
elf/tst-null-argv.debug.out.<number> file name), and a build with
run-built-tests=no to verify there aren't any more obvious instances
of the issue Marcus Shawcroft reported with a previous version in
<https://sourceware.org/ml/libc-alpha/2014-01/msg00462.html>.
* Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(tests): Depend on $(tests-special).
* Makerules (check-abi-list): New variable.
(check-abi): Depend on $(check-abi-list).
[$(subdir) = elf] (tests-special): Add
$(objpfx)check-abi-libc.out.
[$(build-shared) = yes && subdir] (tests-special): Add
$(check-abi-list).
[$(build-shared) = yes && subdir] (tests): Do not depend on
check-abi.
* Rules (tests): Depend on $(tests-special).
(xtests): Depend on $(xtests-special).
* catgets/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* conform/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* elf/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* grp/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* iconv/Makefile (xtests): Change dependencies to ....
(xtests-special): ... additions to this variable.
* iconvdata/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* intl/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable. Also add
$(objpfx)tst-gettext.out.
* io/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* libio/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* malloc/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* misc/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* nptl/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* nptl_db/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* posix/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(xtests): Change dependencies to ....
(xtests-special): ... additions to this variable.
* resolv/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(xtests): Change dependencies to ....
(xtests-special): ... additions to this variable.
* stdio-common/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(do-tst-unbputc): Remove target.
(do-tst-printf): Likewise.
* stdlib/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* string/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* sysdeps/x86/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
localedata:
* Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
In <https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html> I
noted it was necessary to add includes of Makeconfig early in various
subdirectory makefiles for the tests-special variable settings added
by that patch to be conditional on configuration information. No-one
commented on the general question there of whether Makeconfig should
always be included immediately after the definition of subdir.
This patch implements that early inclusion of Makeconfig in each
directory (which is a lot easier than consistent placement of includes
of Rules). Includes are added if needed, or moved up if already
present. Subdirectory "all:" targets are removed, since Makeconfig
provides one.
There is potential for further cleanups I haven't done. Rules and
Makerules have code such as
ifneq "$(findstring env,$(origin headers))" ""
headers :=
endif
to override to empty any value of various variables that came from the
environment. I think there is a case for Makeconfig setting all the
subdirectory variables (other than subdir) to empty to ensure no
outside value is going to take effect if a subdirectory fails to
define a variable. (A list of such variables, possibly out of date
and incomplete, is in manual/maint.texi.) Rules and Makerules would
give errors if Makeconfig hadn't already been included, instead of
including it themselves. The special code to override values coming
from the environment would then be obsolete and could be removed.
Tested x86_64, including that installed binaries are identical before
and after the patch.
* argp/Makefile: Include Makeconfig immediately after defining
subdir.
* assert/Makefile: Likewise.
* benchtests/Makefile: Likewise.
* catgets/Makefile: Likewise.
* conform/Makefile: Likewise.
* crypt/Makefile: Likewise.
* csu/Makefile: Likewise.
(all): Remove target.
* ctype/Makefile: Include Makeconfig immediately after defining
subdir.
* debug/Makefile: Likewise.
* dirent/Makefile: Likewise.
* dlfcn/Makefile: Likewise.
* gmon/Makefile: Likewise.
* gnulib/Makefile: Likewise.
* grp/Makefile: Likewise.
* gshadow/Makefile: Likewise.
* hesiod/Makefile: Likewise.
* hurd/Makefile: Likewise.
(all): Remove target.
* iconvdata/Makefile: Include Makeconfig immediately after
defining subdir.
* inet/Makefile: Likewise.
* intl/Makefile: Likewise.
* io/Makefile: Likewise.
* libio/Makefile: Likewise.
(all): Remove target.
* locale/Makefile: Include Makeconfig immediately after defining
subdir.
* login/Makefile: Likewise.
* mach/Makefile: Likewise.
(all): Remove target.
* malloc/Makefile: Include Makeconfig immediately after defining
subdir.
(all): Remove target.
* manual/Makefile: Include Makeconfig immediately after defining
subdir.
* math/Makefile: Likewise.
* misc/Makefile: Likewise.
* nis/Makefile: Likewise.
* nss/Makefile: Likewise.
* po/Makefile: Likewise.
(all): Remove target.
* posix/Makefile: Include Makeconfig immediately after defining
subdir.
* pwd/Makefile: Likewise.
* resolv/Makefile: Likewise.
* resource/Makefile: Likewise.
* rt/Makefile: Likewise.
* setjmp/Makefile: Likewise.
* shadow/Makefile: Likewise.
* signal/Makefile: Likewise.
* socket/Makefile: Likewise.
* soft-fp/Makefile: Likewise.
* stdio-common/Makefile: Likewise.
* stdlib/Makefile: Likewise.
* streams/Makefile: Likewise.
* string/Makefile: Likewise.
* sunrpc/Makefile: Likewise.
(all): Remove target.
* sysvipc/Makefile: Include Makeconfig immediately after defining
subdir.
* termios/Makefile: Likewise.
* time/Makefile: Likewise.
* timezone/Makefile: Likewise.
(all): Remove target.
* wcsmbs/Makefile: Include Makeconfig immediately after defining
subdir.
* wctype/Makefile: Likewise.
libidn/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
localedata/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
(all): Remove target.
nptl/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
nptl_db/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
Paul Eggert