Commit graph

30 commits

Author SHA1 Message Date
Adhemerval Zanella 2b51742531 nptl: Move cancel state out of cancelhandling
Now that thread cancellation state is not accessed concurrently anymore,
it is possible to move it out the 'cancelhandling'.

The code is also simplified: CANCELLATION_P is replaced with a
internal pthread_testcancel call and the CANCELSTATE_BIT{MASK} is
removed.

With this behavior pthread_setcancelstate does not require to act on
cancellation if cancel type is asynchronous (is already handled either
by pthread_setcanceltype or by the signal handler).

Checked on x86_64-linux-gnu and aarch64-linux-gnu.
2021-06-09 15:16:45 -03:00
Adhemerval Zanella 26cfbb7162 nptl: Remove CANCELING_BITMASK
The CANCELING_BITMASK is used as an optimization to avoid sending
the signal when pthread_cancel is called in a concurrent manner.

This requires then to put both the cancellation state and type on a
shared state (cancelhandling), since 'pthread_cancel' checks whether
cancellation is enabled and asynchrnous to either cancel itself of
 sending the signal.

It also requires handle the CANCELING_BITMASK on
__pthread_disable_asynccancel, however this incurs in the same issues
described on BZ#12683: the cancellation is acted upon even *after*
syscall returns with user visible side-effects.

This patch removes this optimization and simplifies the pthread
cancellation implementation: pthread_cancel now first checks if
cancellation is already pending and if not always, sends a signal
if the target is not itself.  The SIGCANCEL handler is also simpified
since there is not need to setup a CAS loop.

It also allows to move both the cancellation state and mode out of
'cancelhadling' (it is done in subsequent patches).

Checked on x86_64-linux-gnu and aarch64-linux-gnu.
2021-06-09 15:16:45 -03:00
Florian Weimer ce0b7961ae nptl: Consolidate async cancel enable/disable implementation in libc
Previously, the source file nptl/cancellation.c was compiled multiple
times, for libc, libpthread, librt.  This commit switches to a single
implementation, with new __pthread_enable_asynccancel@@GLIBC_PRIVATE,
__pthread_disable_asynccancel@@GLIBC_PRIVATE exports.

The almost-unused CANCEL_ASYNC and CANCEL_RESET macros are replaced
by LIBC_CANCEL_ASYNC and LIBC_CANCEL_ASYNC macros.  They call the
__pthread_* functions unconditionally now.  The macros are still
needed because shared code uses them; Hurd has different definitions.

Reviewed-by: Adhemerval Zanella  <adhemerval.zanella@linaro.org>
2021-05-05 17:19:32 +02:00
Paul Eggert 2b778ceb40 Update copyright dates with scripts/update-copyrights
I used these shell commands:

../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")

and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 6694 files FOO.
I then removed trailing white space from benchtests/bench-pthread-locks.c
and iconvdata/tst-iconv-big5-hkscs-to-2ucs4.c, to work around this
diagnostic from Savannah:
remote: *** pre-commit check failed ...
remote: *** error: lines with trailing whitespace found
remote: error: hook declined to update refs/heads/master
2021-01-02 12:17:34 -08:00
Joseph Myers d614a75396 Update copyright dates with scripts/update-copyrights. 2020-01-01 00:14:33 +00:00
Carlos O'Donell 676b2f2050 nptl: Document AS-safe functions in cancellation.c.
Document in comments that __pthread_enable_asynccancel and
__pthread_disable_asynccancel must be AS-safe in general with
the exception of the act of cancellation.
2019-10-18 15:55:33 -04:00
Paul Eggert 5a82c74822 Prefer https to http for gnu.org and fsf.org URLs
Also, change sources.redhat.com to sourceware.org.
This patch was automatically generated by running the following shell
script, which uses GNU sed, and which avoids modifying files imported
from upstream:

sed -ri '
  s,(http|ftp)(://(.*\.)?(gnu|fsf|sourceware)\.org($|[^.]|\.[^a-z])),https\2,g
  s,(http|ftp)(://(.*\.)?)sources\.redhat\.com($|[^.]|\.[^a-z]),https\2sourceware.org\4,g
' \
  $(find $(git ls-files) -prune -type f \
      ! -name '*.po' \
      ! -name 'ChangeLog*' \
      ! -path COPYING ! -path COPYING.LIB \
      ! -path manual/fdl-1.3.texi ! -path manual/lgpl-2.1.texi \
      ! -path manual/texinfo.tex ! -path scripts/config.guess \
      ! -path scripts/config.sub ! -path scripts/install-sh \
      ! -path scripts/mkinstalldirs ! -path scripts/move-if-change \
      ! -path INSTALL ! -path  locale/programs/charmap-kw.h \
      ! -path po/libc.pot ! -path sysdeps/gnu/errlist.c \
      ! '(' -name configure \
            -execdir test -f configure.ac -o -f configure.in ';' ')' \
      ! '(' -name preconfigure \
            -execdir test -f preconfigure.ac ';' ')' \
      -print)

and then by running 'make dist-prepare' to regenerate files built
from the altered files, and then executing the following to cleanup:

  chmod a+x sysdeps/unix/sysv/linux/riscv/configure
  # Omit irrelevant whitespace and comment-only changes,
  # perhaps from a slightly-different Autoconf version.
  git checkout -f \
    sysdeps/csky/configure \
    sysdeps/hppa/configure \
    sysdeps/riscv/configure \
    sysdeps/unix/sysv/linux/csky/configure
  # Omit changes that caused a pre-commit check to fail like this:
  # remote: *** error: sysdeps/powerpc/powerpc64/ppc-mcount.S: trailing lines
  git checkout -f \
    sysdeps/powerpc/powerpc64/ppc-mcount.S \
    sysdeps/unix/sysv/linux/s390/s390-64/syscall.S
  # Omit change that caused a pre-commit check to fail like this:
  # remote: *** error: sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S: last line does not end in newline
  git checkout -f sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S
2019-09-07 02:43:31 -07:00
Joseph Myers 04277e02d7 Update copyright dates with scripts/update-copyrights.
* All files with FSF copyright notices: Update copyright dates
	using scripts/update-copyrights.
	* locale/programs/charmap-kw.h: Regenerated.
	* locale/programs/locfile-kw.h: Likewise.
2019-01-01 00:11:28 +00:00
Joseph Myers 688903eb3e Update copyright dates with scripts/update-copyrights.
* All files with FSF copyright notices: Update copyright dates
	using scripts/update-copyrights.
	* locale/programs/charmap-kw.h: Regenerated.
	* locale/programs/locfile-kw.h: Likewise.
2018-01-01 00:32:25 +00:00
Florian Weimer 83b09837ed nptl: Remove internal_function attribute 2017-08-31 18:52:00 +02:00
Joseph Myers bfff8b1bec Update copyright dates with scripts/update-copyrights. 2017-01-01 00:14:16 +00:00
Joseph Myers f7a9f785e5 Update copyright dates with scripts/update-copyrights. 2016-01-04 16:05:18 +00:00
Torvald Riegel a2f0363f81 Add and use new glibc-internal futex API.
This adds new functions for futex operations, starting with wait,
abstimed_wait, reltimed_wait, wake.  They add documentation and error
checking according to the current draft of the Linux kernel futex manpage.

Waiting with absolute or relative timeouts is split into separate functions.
This allows for removing a few cases of code duplication in pthreads code,
which uses absolute timeouts; also, it allows us to put platform-specific
code to go from an absolute to a relative timeout into the platform-specific
futex abstractions..

Futex operations that can be canceled are also split out into separate
functions suffixed by "_cancelable".

There are separate versions for both Linux and NaCl; while they currently
differ only slightly, my expectation is that the separate versions of
lowlevellock-futex.h will eventually be merged into futex-internal.h
when we get to move the lll_ functions over to the new futex API.
2015-07-10 13:47:09 +02:00
Joseph Myers b168057aaa Update copyright dates with scripts/update-copyrights. 2015-01-02 16:29:47 +00:00
Ondřej Bílka a1ffb40e32 Use glibc_likely instead __builtin_expect. 2014-02-10 15:07:12 +01:00
Allan McRae d4697bc93d Update copyright notices with scripts/update-copyrights 2014-01-01 22:00:23 +10:00
Joseph Myers 568035b787 Update copyright notices with scripts/update-copyrights. 2013-01-02 19:05:09 +00:00
Paul Eggert 59ba27a63a Replace FSF snail mail address with URLs. 2012-02-09 23:18:22 +00:00
Ulrich Drepper cba0ca7925 Unify source for async cancel handling.
Unify all three places where we enable async cancellation for
syscalls.  Optimize a bit.
2009-05-16 14:55:59 -07:00
Ulrich Drepper 9437b427ce Fix change to prevent cancel signal in unsafe places.
The bits tested to decide when to delay the return when switching
off async cancel mode were wrong.  Fix that.  Also close a race
condition in pthread_cancel where the bit indicating the cancellation
is unconditionally set even if the cancel type might have changed.
2009-05-15 20:42:36 -07:00
Ulrich Drepper 1a7f254b4b No cancel signal in unsafe places.
When disabling async cancellation we cannot return from the function
call if the thread is canceled.  This happens when the cancel bits
have been set before async cancel is disabled but the signal hasn't
been sent/received yet.  Delay for as long as necessary since
otherwise the signal might be received in an unsafe context.
2009-05-15 19:37:12 -07:00
Ulrich Drepper d5c157a978 * cancellation.c (__pthread_disable_asynccancel): Use THREAD_ATOMIC_AND
is available.
	* libc-cancellation.c (__libc_disable_asynccancel): Likewise.
	* sysdeps/x86_64/tls.h: Define THREAD_ATOMIC_AND.
	* sysdeps/i386/tls.h: Likewise.
	(tcbhead_t): Add __private_tm member.
2009-04-27 21:55:49 +00:00
Ulrich Drepper 6a998b09ec Remove __pthread_enable_asynccancel_2. 2003-05-26 02:09:08 +00:00
Ulrich Drepper b22d701bb7 Update.
2003-04-04  Ulrich Drepper  <drepper@redhat.com>

	* sysdeps/pthread/createthread.c (create_thread): Add some more
	comments explaining when to set multiple_threads and when not.

	* pthreadP.h: Define THREAD_ATOMIC_CMPXCHG_VAL and
	THREAD_ATOMIC_BIT_SET if not already defined.
	* sysdeps/i386/tls.h: Define THREAD_ATOMIC_CMPXCHG_VAL and
	THREAD_ATOMIC_BIT_SET:
	* sysdeps/x86_64/tls.h: Likewise.
	* cleanup_defer.c (_pthread_cleanup_push_defer): Rewrite to use
	THREAD_ATOMIC_CMPXCHG_VAL.
	(_pthread_cleanup_pop_restore): Likewise.
	* cancellation.c (__pthread_enable_asynccancel): Likewise.
	(__pthread_enable_asynccancel_2): Likewise.
	(__pthread_disable_asynccancel): Likewise.
	* libc-cancellation.c (__libc_enable_asynccancel): Likewise.
	(__libc_disable_asynccancel): Likewise.
	* init.c (sigcancel_handler): Likewise.
	* pthread_setcancelstate.c (__pthread_setcancelstate): Likewise.
	* pthread_setcanceltype.c (__pthread_setcanceltype): Likewise.
2003-04-05 05:21:15 +00:00
Ulrich Drepper 5a3ab2fc18 Update.
2003-03-21  Ulrich Drepper  <drepper@redhat.com>

	* cancellation.c: Adjust for new form of compare&exchange macros.
	* cleanup_defer.c: Likewise.
	* init.c: Likewise.
	* libc-cancellation.c: Likewise.
	* old_pthread_cond_broadcast.c: Likewise.
	* old_pthread_cond_signal.c: Likewise.
	* old_pthread_cond_timedwait.c: Likewise.
	* old_pthread_cond_wait.c: Likewise.
	* pthread_cancel.c: Likewise.
	* pthread_create.c: Likewise.
	* pthread_detach.c: Likewise.
	* pthread_join.c: Likewise.
	* pthread_key_delete.c: Likewise.
	* pthread_setcancelstate.c: Likewise.
	* pthread_setcanceltype.c: Likewise.
	* pthread_timedjoin.c: Likewise.
	* pthread_tryjoin.c: Likewise.
	* sysdeps/pthread/createthread.c: Likewise.
2003-03-21 08:03:25 +00:00
Ulrich Drepper 32a589b1ea Update.
* cancellation.c (__pthread_enable_asynccancel_2): New function.
	* pthreadP.h: Declare __pthread_enable_asynccancel_2.
	* sysdeps/unix/sysv/linux/i386/i486/pthread_cond_timedwait.S
	(__pthread_cond_timedwait): Use __pthread_enable_asynccancel_2
	instead of __pthread_enable_asynccancel.
	* sysdeps/unix/sysv/linux/i386/i486/pthread_cond_wait.S
	(__pthread_cond_wait): Likewise.
	* sysdeps/pthread/pthread_cond_timedwait.c
	(__pthread_cond_timedwait): Likewise.
	* sysdeps/pthread/pthread_cond_wait.c (__pthread_cond_wait): Likewise.
2003-03-11 23:26:35 +00:00
Ulrich Drepper 9ae0909b35 Update.
2002-12-13  Ulrich Drepper  <drepper@redhat.com>

	* misc/syslog.c (log_cleanup): Don't use parameter in
	__libc_lock_unlock call, use syslog_lock directly.  Adjust callers to
	pass NULL instead of a pointer to syslog_lock.
2002-12-13 10:59:14 +00:00
Ulrich Drepper da63009e0f Update.
* Makefile (tests): Add tst-cleanup1.
	* tst-cleanup1.c: New file.
	* cancellation.c (__cleanup_thread): Removed.
	(__do_cancel): Remove call to __cleanup_thread.
	* pthreadP.h: Remove __cleanup_thread prorotype.
2002-12-12 04:46:44 +00:00
Ulrich Drepper bdb04f9220 Update.
* scripts/output-format.sed: Fix bug in one of the s expressions
	which used / for one too many things.
2002-12-08 08:25:05 +00:00
Ulrich Drepper 76a50749f7 Initial revision
2002-11-26  Ulrich Drepper  <drepper@redhat.com>
	* allocatestack.c (queue_stack): Don't remove stack from list here.
	Do it in the caller.  Correct condition to prematurely terminate
	loop to free stacks.
	(__deallocate_stack): Remove stack from list here.
2002-11-26  Ulrich Drepper  <drepper@redhat.com>
	* Makefile (tests): Add tst-stack1.
	* tst-stack1.c: New file.
	* allocatestack.c (allocate_stack): Initialize the TCB on a user
	provided stack.
	* pthread_attr_getstack.c: Return bottom of the thread area.
2002-11-25  Ulrich Drepper  <drepper@redhat.com>
	* Makefile (libpthread-routines): Add pt-allocrtsig and
	pthread_kill_other_threads.
	* pt-allocrtsig.c: New file.
	* pthread_kill_other_threads.c: New file.
	* sysdeps/unix/sysv/linux/allocrtsig.c: Add additional aliases for
	all three functions.
	* sysdeps/unix/sysv/linux/Makefile (sysdep_routines): Remove
	allocrtsig.
	* sysdeps/unix/sysv/linux/Versions (libc:GLIBC_PRIVATE): Export
	__libc_current_sigrtmin_private, __libc_current_sigrtmax_private,
	and __libc_allocate_rtsig_private.
	* Versions (libpthread): Export pthread_kill_other_threads_np,
	__libc_current_sigrtmin, and __libc_current_sigrtmax.
2002-11-24  Ulrich Drepper  <drepper@redhat.com>

	* allocatestack.c (allocate_stack): stackaddr in attribute points to
	the end of the stack.  Adjust computations.
	When mprotect call fails dequeue stack and free it.
	* pthread_attr_setstack.c: Store top of the stack in stackaddr
	attribute.
	* pthread_getattr_np.c: Likewise.

	* descr.h (IS_DETACHED): Add some more parenthesis to prevent
	surprises.

2002-11-23  Ulrich Drepper  <drepper@redhat.com>

	* sysdeps/pthread/pthread.h (pthread_self): __THROW must come before
	attribute definitions.  Patch by Luca Barbieri <ldb@ldb.ods.org>.

2002-11-22  Ulrich Drepper  <drepper@redhat.com>

	* pthread_getspecific.c: Optimize access to first 2nd-level array.
	* pthread_setspecific.c: Likewise.

2002-11-21  Ulrich Drepper  <drepper@redhat.com>

	* sysdeps/unix/sysv/linux/i386/createthread.c: Remove CLONE_ flags
	definitions.  Get them from the official place.
	* sysdeps/unix/sysv/linux/i386/fork.c: Likewise.

	* sysdeps/unix/sysv/linux/i386/createthread.c: Update CLONE_* flags.
	Use new CLONE_ flags in clone() calls.

	* sysdeps/unix/sysv/linux/fork.c: Use ARCH_FORK to actually fork.
	* sysdeps/unix/sysv/linux/i386/fork.c: New file.

	* Versions: Add pthread_* functions for libc.
	* forward.c: New file.

	* sysdeps/pthread/Makefile (libpthread-sysdeps_routines): Add
	errno-loc.
	* herrno.c: New file.
	* res.c: New file.

	* Makefile (libpthread-routines): Remove sem_post, sem_wait,
	sem_trywait, and sem_timedwait.  Add herrno and res.
	* sem_init.c: Don't initialize lock and waiters members.
	* sem_open.c: Likewise.
	* sem_post.c: Removed.
	* sem_wait.c: Removed.
	* sem_trywait.c: Removed.
	* sem_timedwait.c: Removed.
	* sysdeps/unix/sysv/linux/i386/i486/lowlevelsem.S: Complete rewrite.
	Includes full implementations of sem_post, sem_wait, sem_trywait,
	and sem_timedwait.
	* sysdeps/unix/sysv/linux/i386/lowlevelsem.h (lll_sem_post): Adjust
	for new implementation.
	* sysdeps/unix/sysv/linux/internaltypes.h (struct sem): Remove lock
	and waiters fields.

	* tst-sem3.c: Improve error message.
	* tst-signal3.c: Likewise.

	* init.c (__pthread_initialize_minimal): Use set_tid_address syscall
	to tell the kernel about the termination futex and to initialize tid
	member.  Don't initialize main_thread.
	* descr.h (struct pthread): Remove main_thread member.
	* cancelllation.c (__do_cancel): Remove code handling main thread.
	The main thread is not special anymore.

	* allocatestack.c (__reclaim_stacks): Mark stacks as unused.  Add
	size of the stacks to stack_cache_actsize.

	* pt-readv.c: Add missing "defined".
	* pt-sigwait.c: Likewise.
	* pt-writev.c: Likewise.

2002-11-09  Ulrich Drepper  <drepper@redhat.com>

	* Versions: Export __connect from libpthread.
	Patch by Luca Barbieri <ldb@ldb.ods.org>.

	* Makefile (libpthread-routines): Add pt-raise.
	* sysdeps/unix/sysv/linux/raise.c: New file.
	* sysdeps/unix/sysv/linux/pt-raise.c: New file.
	* sysdeps/generic/pt-raise.c: New file.

	* pthread_cond_init.c: Initialize all data elements of the condvar
	structure.  Patch by Luca Barbieri <ldb@ldb.ods.org>.

	* pthread_attr_init.c: Actually implement 2.0 compatibility version.
	* pthread_create.c: Likewise.

	* Makefile (tests): Add tst-key1, tst-key2, tst-key3.
	* tst-key1.c: New file.
	* tst-key2.c: New file.
	* tst-key3.c: New file.

	* Versions: Export pthread_detach for version GLIBC_2.0.
	Reported by Saurabh Desai <sdesai@austin.ibm.com>.

2002-11-08  Ulrich Drepper  <drepper@redhat.com>

	* pthread_key_create.c: Terminate search after an unused key was found.
	Patch by Luca Barbieri <ldb@ldb.ods.org>.

	* sysdeps/unix/sysv/linux/i386/pthread_once.S: Return zero.
	Patch by Luca Barbieri <ldb@ldb.ods.org>.

2002-10-10  Ulrich Drepper  <drepper@redhat.com>

	* sysdeps/unix/sysv/linux/i386/i486/lowlevelsem.S: Use slow generic
	dynamic lookup for errno in PIC.

	* allocatestack.c (get_cached_stack): Rearrange code slightly to
	release the stack lock as soon as possible.
	Call _dl_allocate_tls_init for TCB from the cache to re-initialize
	the static TLS block.
	(allocate_stack): Call _dl_allocate_tls_init for user-provided stack.

	* cancellation.c: Renamed from cancelation.c.
	* Makefile: Adjust accordingly.
	* pthreadP.h (CANCELLATION_P): Renamed from CANCELATION_P.
	* cleanup_defer.c: Use CANCELLATION_P.
	* pthread_testcancel.c: Likewise.
	* descr.h: Fix spelling in comments.
	* init.c: Likewise.
	* pthread_getattr_np.c: Likewise.
	* pthread_getschedparam.c: Likewise.
	* pthread_setschedparam.c: Likewise.
	* Versions: Likewise.

	* pt-pselect.c: New file.
	* Makefile (libpthread-routines): Add pt-pselect.
	* Versions: Add pselect.

	* tst-cancel4.c: New file.
	* Makefile (tests): Add tst-cancel4.

2002-10-09  Ulrich Drepper  <drepper@redhat.com>

	* pthread_mutex_lock.c: Always record lock ownership.
	* pthread_mutex_timedlock.c: Likewise.
	* pthread_mutex_trylock.c: Likewise.

	* pt-readv.c: New file.
	* pt-writev.c: New file.
	* pt-creat.c: New file.
	* pt-msgrcv.c: New file.
	* pt-msgsnd.c: New file.
	* pt-poll.c: New file.
	* pt-select.c: New file.
	* pt-sigpause.c: New file.
	* pt-sigsuspend.c: New file.
	* pt-sigwait.c: New file.
	* pt-sigwaitinfo.c: New file.
	* pt-waitid.c: New file.
	* Makefile (libpthread-routines): Add pt-readv, pt-writev, pt-creat,
	pt-msgrcv, pt-msgsnd, pt-poll, pt-select, pt-sigpause, pt-sigsuspend,
	pt-sigwait, pt-sigwaitinfo, and pt-waitid.
	* Versions: Add all the new functions.

	* tst-exit1.c: New file.
	* Makefile (tests): Add tst-exit1.

	* sem_timedwait.c: Minor optimization for more optimal fastpath.

2002-10-08  Ulrich Drepper  <drepper@redhat.com>

	* pt-fcntl.c: Only enable asynchronous cancellation for F_SETLKW.

	* pthread_join.c: Enable asynchronous cancellation around lll_wait_tid
	call.  pthread_join is an official cancellation point.
	* pthread_timedjoin.c: Likewise.

	* pthread_cond_wait.c: Revert order in which internal lock are dropped
	and the condvar's mutex are retrieved.
	* pthread_cond_timedwait.c: Likewise.
	Reported by dice@saros.East.Sun.COM.

2002-10-07  Ulrich Drepper  <drepper@redhat.com>

	* pthreadP.h: Cut out all type definitions and move them...
	* sysdeps/unix/sysv/linux/internaltypes.h: ...here.  New file.
	* pthreadP.h: Include <internaltypes.h>.

	* sysdeps/unix/sysv/linux/i386/lowlevelsem.h (lll_sem_post): Little
	performance tweaks.

	* sem_trywait.c: Shuffle #includes around to get right order.
	* sem_timedwait.c: Likewise.
	* sem_post.c: Likewise.
	* sem_wait.c: Likewise.

	* nptl 0.3 released.

	* Makefile (tests): Add tst-signal3.
	* tst-signal3.c: New file.

2002-10-05  Ulrich Drepper  <drepper@redhat.com>

	* sysdeps/unix/sysv/linux/i386/lowlevelsem.h: Tell the compiler that
	the asms modify the sem object.
	(__lll_sem_timedwait): Now takes struct sem* as first parameter.

	* sysdeps/unix/sysv/linux/i386/bits/semaphore.h (sem_t): Don't expose
	the actual members.
	* pthreadP.h (struct sem): New type.  Actual semaphore type.
	* semaphoreP.h: Include pthreadP.h.
	* sem_getvalue.c: Adjust to sem_t change.
	* sem_init.c: Likewise.
	* sem_open.c: Likewise.
	* sem_post.c: Likewise.
	* sem_timedwait.c: Likewise.
	* sem_trywait.c: Likewise.
	* sem_wait.c: Likewise.

2002-10-04  Ulrich Drepper  <drepper@redhat.com>

	* Makefile (tests): Add tst-basic2, tst-exec1, tst-exec3, tst-exec3.
	* tst-basic2.c: New file.
	* tst-exec1.c: New file.
	* tst-exec2.c: New file.
	* tst-exec3.c: New file.

	* tst-fork1.c: Remove extra */.

	* nptl 0.2 released.  The API for IA-32 is complete.
2002-11-26 22:50:54 +00:00