The glob might pass a different stat struct for gl_stat and gl_lstat
when GLOB_ALTDIRFUNC is used. This requires add a new 64-bit time
version that also uses 64-bit time stat functions.
Checked on i686-linux-gnu and x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
A new build flag, _TIME_BITS, enables the usage of the newer 64-bit
time symbols for legacy ABI (where 32-bit time_t is default). The 64
bit time support is only enabled if LFS (_FILE_OFFSET_BITS=64) is
also used.
Different than LFS support, the y2038 symbols are added only for the
required ABIs (armhf, csky, hppa, i386, m68k, microblaze, mips32,
mips64-n32, nios2, powerpc32, sparc32, s390-32, and sh). The ABIs with
64-bit time support are unchanged, both for symbol and types
redirection.
On Linux the full 64-bit time support requires a minimum of kernel
version v5.1. Otherwise, the 32-bit fallbacks are used and might
results in error with overflow return code (EOVERFLOW).
The i686-gnu does not yet support 64-bit time.
This patch exports following rediretions to support 64-bit time:
* libc:
adjtime
adjtimex
clock_adjtime
clock_getres
clock_gettime
clock_nanosleep
clock_settime
cnd_timedwait
ctime
ctime_r
difftime
fstat
fstatat
futimens
futimes
futimesat
getitimer
getrusage
gettimeofday
gmtime
gmtime_r
localtime
localtime_r
lstat_time
lutimes
mktime
msgctl
mtx_timedlock
nanosleep
nanosleep
ntp_gettime
ntp_gettimex
ppoll
pselec
pselect
pthread_clockjoin_np
pthread_cond_clockwait
pthread_cond_timedwait
pthread_mutex_clocklock
pthread_mutex_timedlock
pthread_rwlock_clockrdlock
pthread_rwlock_clockwrlock
pthread_rwlock_timedrdlock
pthread_rwlock_timedwrlock
pthread_timedjoin_np
recvmmsg
sched_rr_get_interval
select
sem_clockwait
semctl
semtimedop
sem_timedwait
setitimer
settimeofday
shmctl
sigtimedwait
stat
thrd_sleep
time
timegm
timerfd_gettime
timerfd_settime
timespec_get
utime
utimensat
utimes
utimes
wait3
wait4
* librt:
aio_suspend
mq_timedreceive
mq_timedsend
timer_gettime
timer_settime
* libanl:
gai_suspend
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
The getdate is basically a wrapper localtime and mktime. The 64-bit
time support is done calling the 64-bit internal functions, there is
no need to add a new symbol version.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
It is only used for !__USE_MISC, the default way uses the kernel
headers. The patch also adds the SO_TIMESTAMP, SO_TIMESTAMPNS, and
SO_TIMESTAMPING which uses new values for 64-bit time_t kernel
interfaces.
The __USE_TIME_BITS64 is not defined internally yet, although the
internal header is used when building the 64-bit stat implementations.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Instead of replicate the same definitions from struct_shmid64_ds.h
on the multiple struct_shmid_ds.h, use a common header which is included
when required (struct_shmid64_ds_helper.h).
The __USE_TIME_BITS64 is not defined internally yet, although the
internal header is used when building the 64-bit semctl implementation.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Instead of replicate the same definitions from struct_semid64_ds.h
on the multiple struct_semid_ds.h, use a common header which is included
when required (struct_semid64_ds_helper.h).
The __USE_TIME_BITS64 is not defined internally yet, although the
internal header is used when building the 64-bit semctl implementation.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Instead of replicate the same definitions from struct_msqid64_ds.h
on the multiple struct_msqid_ds.h, use a common header which is included
when required (struct_msqid64_ds_helper.h).
The __USE_TIME_BITS64 is not defined internally yet, although the
internal header is used when building the 64-bit stat implementations.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Instead of replicate the same definitions from struct_stat_time64.h
on the multiple struct_stat.h, use a common header which is included
when required (struct_stat_time64_helper.h). The 64-bit time support
is added only for LFS support.
The __USE_TIME_BITS64 is not defined internally yet, although the
internal header is used when building the 64-bit stat implementations.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
The __USE_TIME_BITS64 is not defined internally yet.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
The __USE_TIME_BITS64 is not defined internally yet.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
The __USE_TIME_BITS64 is not defined internally yet.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
The __USE_TIME_BITS64 is not defined internally yet.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
The __USE_TIME_BITS64 is not defined internally yet.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Handle the SO_TIMESTAMP{NS} similar to recvmsg: for
!__ASSUME_TIME64_SYSCALLS it converts the first 32-bit time SO_TIMESTAMP
or SO_TIMESTAMPNS and appends it to the control buffer if has extra
space or returns MSG_CTRUNC otherwise. The 32-bit time field is kept
as-is.
Also for !__ASSUME_TIME64_SYSCALLS it limits the maximum number of
'struct mmsghdr *' to IOV_MAX (and also increases the stack size
requirement to IOV_MAX times sizeof (socklen_t)). The Linux imposes
a similar limit to sendmmsg, so bound the array size on recvmmsg is not
unreasonable. And this will be used only on older when building with
32-bit time support.
Checked on x86_64-linux-gnu and i686-linux-gnu (on 5.4 and on 4.15
kernel).
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
The recvmsg handling is more complicated because it requires check the
returned kernel control message and make some convertions. For
!__ASSUME_TIME64_SYSCALLS it converts the first 32-bit time SO_TIMESTAMP
or SO_TIMESTAMPNS and appends it to the control buffer if has extra
space or returns MSG_CTRUNC otherwise. The 32-bit time field is kept
as-is.
Calls with __TIMESIZE=32 will see the converted 64-bit time control
messages as spurious control message of unknown type. Calls with
__TIMESIZE=64 running on pre-time64 kernels will see the original
message as a spurious control ones of unknown typ while running on
kernel with native 64-bit time support will only see the time64 version
of the control message.
Checked on x86_64-linux-gnu and i686-linux-gnu (on 5.4 and on 4.15
kernel).
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
The constant values will be changed for __TIMESIZE=64, so binaries built
with 64-bit time support might fail to work properly on old kernels.
Both {get,set}sockopt will retry the syscall with the old constant
values and the timeout value adjusted when kernel returns ENOTPROTOPT.
It also adds an internal only SO_{RCV,SND}TIMEO where
COMPAT_SO_{RCV,SND}TIMEO_OLD indicates pre 32-bit time support and
COMPAT_SO_{RCV,SND}TIMEO_NEW indicates time64 support. It allows to
refer to constant independently of the time_t ABI and kernel version
used.
Checked on x86_64-linux-gnu and i686-linux-gnu (on 5.4 and on 4.15
kernel).
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
The s390 will require the 64-bit time symbols for y2038 support.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
The n32 will require the 64-bit time symbols for y2038 support.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
The n32 will require the 64-bit time symbols for y2038 support.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reinstate gconv-modules as the main file so that the configuration
files in gconv-modules.d/ become add-on configuration. With this, the
effective user visible change is that GCONV_PATH can now have
supplementary configuration in GCONV_PATH/gconv-modules.d/ in addition
to the main GCONV_PATH/gconv-modules file.
Commit 68ab82f566 added support for the scv
syscall ABI on powerpc. Since then systems that have kernel and processor
support started using scv. However adding the proper support for a new syscall
ABI requires changes to several other projects (e.g. qemu, valgrind, strace,
kernel), which are gradually receiving support.
Meanwhile, having a way to disable scv on glibc at build time can be useful for
distros that may encounter conflicts with projects that still do not support the
scv ABI, buying time until proper support is added.
This commit adds a --disable-scv option that disables scv support and uses sc
for all syscalls, like before commit 68ab82f566.
Reviewed-by: Raphael M Zinsly <rzinsly@linux.ibm.com>
support_stat_nanoseconds cannot restore the ctime time, and
this may lead to sporadic test failures. Therefore, probe for
nanoseconds support before the initial statx call.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The testcase provided on BZ#19366 may update __nptl_nthreads in a wrong
order, triggering an early process exit because the thread decrement
the value twice.
The issue is once the thread exits without acting on cancellation,
it decreaments '__nptl_nthreads' and then atomically set
'cancelhandling' with EXITING_BIT (thus preventing further cancellation
handler to act). The issue happens if a SIGCANCEL is received between
checking '__ntpl_nthreads' and setting EXITING_BIT. To avoid it, the
'__nptl_nthreads' decrement is moved after EXITING_BIT.
It does fully follow the POSIX XSH 2.9.5 Thread Cancellation under
the heading Thread Cancellation Cleanup Handlers that states that
when a cancellation request is acted upon, or when a thread calls
pthread_exit(), the thread first disables cancellation by setting its
cancelability state to PTHREAD_CANCEL_DISABLE and its cancelability type
to PTHREAD_CANCEL_DEFERRED. The issue is '__pthread_enable_asynccancel'
explicit enabled assynchrnous cancellation, so an interrupted syscall
within the cancellation cleanup handlers might see an invalid cancelling
type (a possible fix might be possible with my proposed solution to
BZ#12683).
Trying to come up with a test is quite hard since it requires to
mimic the timing issue described below, however I see that the
bug report reproducer does not early exit anymore.
Checked on x86_64-linux-gnu.
It consolidates the tgkill call and it is the first step of making
pthread_cancel async-signal-safe. It also fix a possible issue
where the 'struct pthread' tid is not read atomically, which might
send an invalid cancellation signal (similar to what
db988e50a87f613cb6b9e98a2fc66a4848bc3546 fixed for pthread_join).
Checked on x86_64-linux-gnu and aarch64-linux-gnu.
Now that pthread_kill is provided by libc.so it is possible to
implement the generic POSIX implementation as
'pthread_kill(pthread_self(), sig)'.
For Linux implementation, pthread_kill read the targeting TID from
the TCB. For raise, this it not possible because it would make raise
fail when issue after vfork (where creates the resulting process
has a different TID from the parent, but its TCB is not updated as
for pthread_create). To make raise use pthread_kill, it is make
usable from vfork by getting the target thread id through gettid
syscall.
Checked on x86_64-linux-gnu and aarch64-linux-gnu.
Now that the thread cancellation type is not accessed concurrently
anymore, it is possible to move it out the cancelhandling.
By removing the cancel state out of the internal thread cancel handling
state there is no need to check if cancelled bit was set in CAS
operation.
It allows simplifing the cancellation wrappers and the
CANCEL_CANCELED_AND_ASYNCHRONOUS is removed.
Checked on x86_64-linux-gnu and aarch64-linux-gnu.
Now that thread cancellation state is not accessed concurrently anymore,
it is possible to move it out the 'cancelhandling'.
The code is also simplified: CANCELLATION_P is replaced with a
internal pthread_testcancel call and the CANCELSTATE_BIT{MASK} is
removed.
With this behavior pthread_setcancelstate does not require to act on
cancellation if cancel type is asynchronous (is already handled either
by pthread_setcanceltype or by the signal handler).
Checked on x86_64-linux-gnu and aarch64-linux-gnu.
The CANCELING_BITMASK is used as an optimization to avoid sending
the signal when pthread_cancel is called in a concurrent manner.
This requires then to put both the cancellation state and type on a
shared state (cancelhandling), since 'pthread_cancel' checks whether
cancellation is enabled and asynchrnous to either cancel itself of
sending the signal.
It also requires handle the CANCELING_BITMASK on
__pthread_disable_asynccancel, however this incurs in the same issues
described on BZ#12683: the cancellation is acted upon even *after*
syscall returns with user visible side-effects.
This patch removes this optimization and simplifies the pthread
cancellation implementation: pthread_cancel now first checks if
cancellation is already pending and if not always, sends a signal
if the target is not itself. The SIGCANCEL handler is also simpified
since there is not need to setup a CAS loop.
It also allows to move both the cancellation state and mode out of
'cancelhadling' (it is done in subsequent patches).
Checked on x86_64-linux-gnu and aarch64-linux-gnu.
Now that cancellation is not used anymore to handle thread setup
creation failure, the sighandle can be installed only when
pthread_cancel is actually used.
Checked on x86_64-linux-gnu and aarch64-linux-gnu.
To setup either the thread scheduling parameters or affinity,
pthread_create enforce synchronization on created thread to wait until
its parent either release PD ownership or send a cancellation signal if
a failure occurs.
However, cancelling the thread does not deallocate the newly created
stack since cancellation expects that a pthread_join to deallocate any
allocated thread resouces (threads stack or TLS).
This patch changes on how the thread resource is deallocate in case of
failure to be synchronous, where the creating thread will signal the
created thread to exit early so it could be joined. The creating thread
will be reponsible for the resource cleanup before returning to the
caller.
To signal the creating thread that a failure has occured, an unused
'struct pthread' member, parent_cancelhandling_unsed, now indicates
whether the setup has failed so creating thread can proper exit.
This strategy also simplifies by not using thread cancellation and
thus not running libgcc_so load in the signal handler (which is
avoided in thread cancellation since 'pthread_cancel' is the one
responsible to dlopen libgcc_s). Another advantage is since the
early exit is move to first step at thread creation, the signal
mask is not already set and thus it can not act on change ID setxid
handler.
Checked on x86_64-linux-gnu and aarch64-linux-gnu.
Since commit 0c1c3a771e
("dlfcn: Move dlopen into libc") libdl.a is empty, so linking
against it is no longer necessary.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The testcase elf/tst-tls9-static sometimes fails with:
cannot open 'tst-tlsmod5.so': tst-tlsmod5.so: cannot open shared object file: No such file or directory
cannot open 'tst-tlsmod6.so': tst-tlsmod6.so: cannot open shared object file: No such file or directory
After recent commit
6f1c701026
"dlfcn: Cleanups after -ldl is no longer required"
the libdl variable is not set anymore and thus the
dependencies were missing.
Split module configuration so that only the bare minimum charsets,
i.e. ANSI_X3.110, ISO8859-15, ISO8859-1, CP1252, UNICODE, UTF-16,
UTF-32 and UTF-7 are configured in gconv-modules.conf. The remaining
module configurations are now in gconv-modules-extra.conf.
Reviewed-by: DJ Delorie <dj@redhat.com>
Move all gconv-modules configuration files to gconv-modules.conf.
That is, the S390 extensions now become gconv-modules-s390.conf. Move
both configuration files into gconv-modules.d.
Now GCONV_PATH/gconv-modules is read only for backward compatibility
for third-party gconv modules directories.
Reviewed-by: DJ Delorie <dj@redhat.com>
Read configuration files with names ending in .conf in
GCONV_PATH/gconv-modules.d to mirror configuration flexibility in
iconvconfig into the iconv program and function.
Reviewed-by: DJ Delorie <dj@redhat.com>
In addition to GCONV_PATH/gconv-modules, also read module
configuration from *.conf files in GCONV_PATH/gconv-modules.d. This
allows a single gconv directory to have multiple sets of gconv modules
but at the same time, a single modules cache.
With this feature, one could separate the glibc supported gconv
modules into a minimal essential set (ISO-8859-*, UTF, etc.) from the
remaining modules. In future, these could be further segregated into
langpack-associated sets with their own
gconv-modules.d/someconfig.conf.
Reviewed-by: DJ Delorie <dj@redhat.com>
Split out configuration file handling code from handle_dir into its
own function so that it can be reused for multiple configuration
files.
Reviewed-by: DJ Delorie <dj@redhat.com>
Add inline assembler for the roundeven functions.
Passes GLIBC regression. Note GCC does not inline the builtin (PR100966),
so this cannot be used for now.
This patch replaced obsolete AC_TRY_COMPILE to AC_COMPILE_IFELSE or
AC_PREPROC_IFELSE.
It has been confirmed that GNU 'autoconf' 2.69 suppressed obsolete
warnings, updated the following files:
- configure
- sysdeps/mach/configure
- sysdeps/mach/hurd/configure
- sysdeps/s390/configure
- sysdeps/unix/sysv/linux/configure
and didn't change the following files:
- sysdeps/ieee754/ldbl-opt/configure
- sysdeps/unix/sysv/linux/powerpc/configure
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch covers the following condition:
Strings start with different alignments and end with length less than or
equal to 512 byte.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Consolidate all hooks structures into a single one. There are
no static dlopen ABI concerns because glibc 2.34 already comes
with substantial ABI-incompatible changes in this area. (Static
dlopen requires the exact same dynamic glibc version that was used
for static linking.)
The new approach uses a pointer to the hooks structure into
_rtld_global_ro and initalizes it in __rtld_static_init. This avoids
a back-and-forth with various callback functions.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The test appears to use _dlfcn_hook@@GLIBC_PRIVATE as a way to
test dlvsym without having to know the appropriate symbol version.
With <first-versions.h>, we can use a public symbol and the symbol
version at which it was defined first.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This commit removes the ELF constructor and internal variables from
dlfcn/dlfcn.c. The file now serves the same purpose as
nptl/libpthread-compat.c, so it is renamed to dlfcn/libdl-compat.c.
The use of libdl-shared-only-routines ensures that libdl.a is empty.
This commit adjusts the test suite not to use $(libdl). The libdl.so
symbolic link is no longer installed.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
