Since aligned loads and stores are huge performance
advantage the implementation always tries to do aligned
access. Among the cases when src and dst addresses are
aligned or unaligned evenly there are cases of not evenly
unaligned src and dst. For such cases (if the length is
big enough) ext instruction is used to merge-and-shift
two memory chunks loaded from two adjacent aligned
locations and then the adjusted chunk gets stored to
aligned address.
Performance gain against the current T2 implementation:
memcpy-large: 65K-32M: +40% - +10%
memcpy-walk: 128-32M: +20% - +2%
The bits/sem.h headers for architectures using the Linux kernel vary
in a few ways:
* x32 uses __syscall_ulong_t instead of unsigned long int.
* The x86 header uses padding after time fields unconditionally
(including for both x86_64 ABIs), not just for 32-bit time (unlike
in msqid_ds where there is only padding for 32-bit time). Because
this padding is present for x32, and is __syscall_ulong_t there, it
does have to be __syscall_ulong_t, not unsigned long int.
* The MIPS header never uses padding around time fields, even when
32-bit (unlike in msqid_ds where it has endian-dependent padding for
32-bit time).
* Some older 32-bit big-endian architectures have padding before
rather than after time fields, although the preferred generic
approach is padding after the time fields independent of endianness.
(There are also insubstantial differences such as use of unsigned int
for padding instead of unsigned long int, which makes no difference to
layout since the padding fields using unsigned int are only present on
32-bit architectures.)
For the first, __syscall_ulong_t can be used in the generic version as
it's the same as unsigned long int everywhere except x32. For the
other differences, this patch adds macros __SEM_PAD_BEFORE_TIME and
__SEM_PAD_AFTER_TIME in a new bits/sem-pad.h header, so that header is
the only one needing to be provided on architectures with differences
in this area, and everything else can go in a single common bits/sem.h
header.
Tested for x86_64 and x86, and with build-many-glibcs.py.
* sysdeps/unix/sysv/linux/Makefile (sysdep_headers): Add
bits/sem-pad.h.
* sysdeps/unix/sysv/linux/bits/sem.h: Include <bits/sem-pad.h>
instead of <bits/wordsize.h>.
(__SEM_PAD_TIME): New macro, depending on [__SEM_PAD_BEFORE_TIME]
and [__SEM_PAD_AFTER_TIME].
(struct semid_ds): Define time fields using __SEM_PAD_TIME. Use
__syscall_ulong_t instead of unsigned long int.
* sysdeps/unix/sysv/linux/bits/sem-pad.h: New file.
* sysdeps/unix/sysv/linux/hppa/bits/sem-pad.h: Likewise.
* sysdeps/unix/sysv/linux/mips/bits/sem-pad.h: Likewise.
* sysdeps/unix/sysv/linux/powerpc/bits/sem-pad.h: Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/sem-pad.h: Likewise.
* sysdeps/unix/sysv/linux/x86/bits/sem-pad.h: Likewise.
* sysdeps/unix/sysv/linux/hppa/bits/sem.h: Remove.
* sysdeps/unix/sysv/linux/mips/bits/sem.h: Likewise.
* sysdeps/unix/sysv/linux/powerpc/bits/sem.h: Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/sem.h: Likewise.
* sysdeps/unix/sysv/linux/x86/bits/sem.h: Likewise.
[BZ#23744]
This refactoring was prompted by a problem when the regex code is
used as part of Gnulib and when the builder’s compiler does not grok
__builtin_expect. Problem reported for Gawk by Nelson H.F. Beebe in:
https://lists.gnu.org/r/bug-gnulib/2018-09/msg00137.html
Although this refactoring does not fix the problem directly,
we might as well have Gawk use the now-preferred glibc style for when
__builtin_expect is unavailable.
* posix/regex_internal.h (BE): Remove.
All uses replaced by __glibc_unlikely or __glibc_likely.
The bits/msq.h headers for architectures using the Linux kernel vary
in a few ways:
* x32 uses __syscall_ulong_t instead of unsigned long int.
* x32 has 64-bit time_t, so no padding around time fields despite
__WORDSIZE == 32.
* Some older 32-bit big-endian architectures have padding before
rather than after time fields, although the preferred generic
approach is padding after the time fields independent of endianness.
(There are also insubstantial differences such as use of unsigned int
for padding instead of unsigned long int, which makes no difference to
layout since the padding fields using unsigned int are only present on
32-bit architectures.)
For the first, __syscall_ulong_t can be used in the generic version as
it's the same as unsigned long int everywhere except x32. For the
other two differences, this patch adds macros __MSQ_PAD_BEFORE_TIME
and __MSQ_PAD_AFTER_TIME in a new bits/msq-pad.h header, so that
header is the only one needing to be provided on architectures with
differences in this area, and everything else can go in a single
common bits/msq.h header. Once we have __TIMESIZE, the generic
bits/msq-pad.h can change to use that instead of __WORDSIZE, at which
point the x86 version of bits/msq-pad.h won't be needed either.
Tested for x86_64 and x86, and with build-many-glibcs.py.
* sysdeps/unix/sysv/linux/Makefile (sysdep_headers): Add
bits/msq-pad.h.
* sysdeps/unix/sysv/linux/bits/msq.h: Include <bits/msq-pad.h>
instead of <bits/wordsize.h>.
(msgqnum_t): Define as __syscall_ulong_t.
(msglen_t): Likewise.
(__MSQ_PAD_TIME): New macro, depending on [__MSQ_PAD_BEFORE_TIME]
and [__MSQ_PAD_AFTER_TIME].
(struct msqid_ds): Define time fields using __MSQ_PAD_TIME. Use
__syscall_ulong_t instead of unsigned long int.
* sysdeps/unix/sysv/linux/bits/msq-pad.h: New file.
* sysdeps/unix/sysv/linux/hppa/bits/msq-pad.h: Likewise.
* sysdeps/unix/sysv/linux/mips/bits/msq-pad.h: Likewise.
* sysdeps/unix/sysv/linux/powerpc/bits/msq-pad.h: Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/msq-pad.h: Likewise.
* sysdeps/unix/sysv/linux/x86/bits/msq-pad.h: Likewise.
* sysdeps/unix/sysv/linux/hppa/bits/msq.h: Remove.
* sysdeps/unix/sysv/linux/mips/bits/msq.h: Likewise.
* sysdeps/unix/sysv/linux/powerpc/bits/msq.h: Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/msq.h: Likewise.
* sysdeps/unix/sysv/linux/x86/bits/msq.h: Likewise.
sysdeps/unix/sysv/linux/bits/shm.h has padding after time fields in
struct shmid_ds unconditionally, and thus is only suitable for 32-bit
architectures (no 64-bit configurations use this file);
sysdeps/unix/sysv/linux/generic/bits/shm.h is substantively the same,
except that the padding is conditioned on __WORDSIZE == 32, and so it
can be used for 64-bit architectures as well.
This patch adds the conditionals to
sysdeps/unix/sysv/linux/bits/shm.h. The linux/generic/ version is
then no longer needed and so is removed, as are the alpha and s390
versions which are also no longer needed. The other
architecture-specific versions have different padding, layout, types
or SHMLBA definitions and so are still needed after this change.
This is essentially the same change for bits/shm.h as the bits/msq.h
patch and the bits/sem.h patch. However, the details of the padding
variations for the architectures that aren't changed are not all the
same between msqid_ds, shmid_ds and semid_ds.
Tested with build-many-glibcs.py.
* sysdeps/unix/sysv/linux/bits/shm.h: Include <bits/wordsize.h>.
(struct shmid_ds): Condition padding after time fields on
[__WORDSIZE == 32].
* sysdeps/unix/sysv/linux/alpha/bits/shm.h: Remove file.
* sysdeps/unix/sysv/linux/generic/bits/shm.h: Likewise.
* sysdeps/unix/sysv/linux/s390/bits/shm.h: Likewise.
sysdeps/unix/sysv/linux/bits/sem.h has padding after time fields in
struct semid_ds unconditionally, and thus is only suitable for 32-bit
architectures (no 64-bit configurations use this file);
sysdeps/unix/sysv/linux/generic/bits/sem.h is substantively the same,
except that the padding is conditioned on __WORDSIZE == 32, and so it
can be used for 64-bit architectures as well.
This patch adds the conditionals to
sysdeps/unix/sysv/linux/bits/sem.h. The linux/generic/ version is
then no longer needed and so is removed, as are the alpha, ia64 and
s390 versions which are also no longer needed. The other
architecture-specific versions have different padding or types and so
are still needed after this change.
This is essentially the same change for bits/sem.h as the bits/msq.h
patch. However, the details of the padding variations for the
architectures that aren't changed are not all the same between
msqid_ds and semid_ds.
Tested with build-many-glibcs.py.
* sysdeps/unix/sysv/linux/bits/sem.h: Include <bits/wordsize.h>.
(struct semid_ds): Condition padding after time fields on
[__WORDSIZE == 32].
* sysdeps/unix/sysv/linux/alpha/bits/sem.h: Remove file.
* sysdeps/unix/sysv/linux/generic/bits/sem.h: Likewise.
* sysdeps/unix/sysv/linux/ia64/bits/sem.h: Likewise.
* sysdeps/unix/sysv/linux/s390/bits/sem.h: Likewise.
sysdeps/unix/sysv/linux/bits/msq.h has padding after time fields in
struct msqid_ds unconditionally, and thus is only suitable for 32-bit
architectures (no 64-bit configurations use this file);
sysdeps/unix/sysv/linux/generic/bits/msq.h is substantively the same,
except that the padding is conditioned on __WORDSIZE == 32, and so it
can be used for 64-bit architectures as well.
This patch adds the conditionals to
sysdeps/unix/sysv/linux/bits/msq.h. The linux/generic/ version is
then no longer needed and so is removed, as are the alpha, ia64 and
s390 versions which are also no longer needed. The other
architecture-specific versions have different padding or types and so
are still needed after this change.
Tested with build-many-glibcs.py.
* sysdeps/unix/sysv/linux/bits/msq.h: Include <bits/wordsize.h>.
(struct msqid_ds): Condition padding after time fields on
[__WORDSIZE == 32].
* sysdeps/unix/sysv/linux/alpha/bits/msq.h: Remove file.
* sysdeps/unix/sysv/linux/generic/bits/msq.h: Likewise.
* sysdeps/unix/sysv/linux/ia64/bits/msq.h: Likewise.
* sysdeps/unix/sysv/linux/s390/bits/msq.h: Likewise.
Increase timeout from the default 20s to 40s. This test makes close to
2 million syscalls with distribution:
1180249 connect
297952 getsockname
144040 lseek
143734 read
14466 close
...
connect can be slow, so the default timeout was not enough on slow
systems.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* nss/tst-nss-files-hosts-multi.c (TIMEOUT): Define.
Increase timeout from the default 20s to 100s. This test makes close to
20 million syscalls with distribution:
12327675 read
4143204 lseek
929475 close
929471 openat
92817 fstat
1431 write
...
The default timeout assumes each can finish in 1us on average which
is not true on slow machines.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* libio/tst-readline.c (TIMEOUT): Define.
[BZ#23745]
This fix affects only Gnulib. Problem discovered when
mktime.c was used as part of Gnulib in bleeding-edge Coreutils.
* time/mktime.c:
(my_tzset) [!_LIBC && !NEED_MKTIME_WORKING && !NEED_MKTIME_WINDOWS]:
Do not define since it is not used. Defining an unused static
function prompts a warning from GCC when Coreutils is configured
with --enable-gcc-warnings.
Otherwise, we see the following runtime error when using the parameter:
File "./glibc/benchtests/scripts/compare_bench.py", line 46, in do_compare
if d > threshold:
TypeError: '>' not supported between instances of 'float' and 'str'
* benchtests/scripts/compare_bench.py (main): set float type on
threshold argument.
Month names as provided by Oqaasileriffik, the official Greenlandic
language regulator. They have recently reached the consensus regarding
the orthography of the month names.
Date formats updated to match the correct Greenlandic order which is MDY.
[BZ #23740]
* localedata/locales/kl_GL (mon): Update, the relative case.
(alt_mon): Add, fill with month names in the nominative case.
(d_t_fmt): Set to "%a %b %d %Y %T %Z".
(d_fmt): Set to "%b %d %Y".
hppa currently has a bits/mman.h that does not include
bits/mman-linux.h, unlike all other architectures using the Linux
kernel. This sort of variation between architectures is generally
unhelpful when making global changes for new constants added to new
Linux kernel releases.
This patch changes hppa to use bits/mman-linux.h, overriding constants
with different values as necessary (including with #undef after
bits/mman.h inclusion when needed, as already done for alpha). While
there could possibly be further improvements through e.g. splitting
more sets of definitions into separate bits/ headers, I think this is
still an improvement on the current state. diffstat shows 27 lines
added, 51 deleted (and some of that is actually existing lines moving
to a different place in the file).
Tested with build-many-glibcs.py for hppa-linux-gnu.
* sysdeps/unix/sysv/linux/hppa/bits/mman.h: Include
<bits/mman-linux.h>.
(PROT_READ): Don't define here.
(PROT_WRITE): Likewise.
(PROT_EXEC): Likewise.
(PROT_NONE): Likewise.
(PROT_GROWSDOWN): Likewise.
(PROT_GROWSUP): Likewise.
(MAP_SHARED): Likewise.
(MAP_PRIVATE): Likewise.
[__USE_MISC] (MAP_SHARED_VALIDATE): Likewise.
[__USE_MISC] (MAP_FILE): Likewise.
[__USE_MISC] (MAP_ANONYMOUS): Likewise.
[__USE_MISC] (MAP_ANON): Likewise.
[__USE_MISC] (MAP_HUGE_SHIFT): Likewise.
[__USE_MISC] (MAP_HUGE_MASK): Likewise.
(MCL_CURRENT): Likewise.
(MCL_FUTURE): Likewise.
(MCL_ONFAULT): Likewise.
[__USE_MISC] (MADV_NORMAL): Likewise.
[__USE_MISC] (MADV_RANDOM): Likewise.
[__USE_MISC] (MADV_SEQUENTIAL): Likewise.
[__USE_MISC] (MADV_WILLNEED): Likewise.
[__USE_MISC] (MADV_DONTNEED): Likewise.
[__USE_MISC] (MADV_FREE): Likewise.
[__USE_MISC] (MADV_REMOVE): Likewise.
[__USE_MISC] (MADV_DONTFORK): Likewise.
[__USE_MISC] (MADV_DOFORK): Likewise.
[__USE_MISC] (MADV_HWPOISON): Likewise.
[__USE_XOPEN2K] (POSIX_MADV_NORMAL): Likewise.
[__USE_XOPEN2K] (POSIX_MADV_RANDOM): Likewise.
[__USE_XOPEN2K] (POSIX_MADV_SEQUENTIAL): Likewise.
[__USE_XOPEN2K] (POSIX_MADV_WILLNEED): Likewise.
[__USE_XOPEN2K] (POSIX_MADV_DONTNEED): Likewise.
(__MAP_ANONYMOUS): New macro.
[__USE_MISC] (MAP_TYPE): Undefine and redefine after
<bits/mman-linux.h> inclusion.
(MAP_FIXED): Likewise.
(MS_SYNC): Likewise.
(MS_ASYNC): Likewise.
(MS_INVALIDATE): Likewise.
[__USE_MISC] (MADV_MERGEABLE): Likewise.
[__USE_MISC] (MADV_UNMERGEABLE): Likewise.
[__USE_MISC] (MADV_HUGEPAGE): Likewise.
[__USE_MISC] (MADV_NOHUGEPAGE): Likewise.
[__USE_MISC] (MADV_DONTDUMP): Likewise.
[__USE_MISC] (MADV_DODUMP): Likewise.
[__USE_MISC] (MADV_WIPEONFORK): Likewise.
[__USE_MISC] (MADV_KEEPONFORK): Likewise.
The redirection of built-in functions such as sqrt in include/math.h
applies when the wrappers for those functions in libnldbl_nonshared.a
are built, resulting in references to internal names such as
__ieee754_sqrt that aren't actually exported from the shared libm.
(This applies for sqrt in 2.28, also for the round-to-integer
functions in current master because of my changes there.) This patch
arranges for NO_MATH_REDIRECT to be used for all the affected
functions, and adds a test for those functions in
libnldbl_nonshared.a.
(We could of course choose to obsolete libnldbl_nonshared.a and
require that people building with -mlong-double-64 either include the
relevant headers and have a compiler supporting asm redirection, or
have some other means of achieving that redirection at compile time if
not including those headers. But while we have libnldbl_nonshared.a,
it seems appropriate to fix such bugs in it.)
Tested for powerpc, and with build-many-glibcs.py.
[BZ #23735]
* sysdeps/ieee754/ldbl-opt/nldbl-compat.h (NO_MATH_REDIRECT):
Define.
* sysdeps/ieee754/ldbl-opt/test-nldbl-redirect.c: New file.
* sysdeps/ieee754/ldbl-opt/Makefile [$(subdir) = math] (tests):
Add test-nldbl-redirect.
[$(subdir) = math] (CFLAGS-test-nldbl-redirect.c): New variable.
[$(subdir) = math] ($(objpfx)test-nldbl-redirect): Depend on
$(objpfx)libnldbl_nonshared.a.
The test-container.c file assumes that ld.so is always named
something like /elf/ld-linux-*.
But e.g. on s390x it is named ld64.so.1 or ld.so.1 on s390.
There are other architectures like power or mips with similar names.
This patch introduces the new global variable support_objdir_elf_ldso
which contains the absolute path to the runtime linker used by the
testsuite, e.g. OBJDIR_PATH/elf/ld-linux-x86-64.so.2.
The check in test-container.c is now comparing against this path.
Without this patch, test-container.c is searching invalid files / directories
and fails to find glibc/nss/tst-nss-test3.root/tst-nss-test3.script.
Then the test tst-nss-test3 fails!
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
ChangeLog:
* support/support.h (support_objdir_elf_ldso): New variable.
* support/support_paths.c (support_objdir_elf_ldso): Likewise.
* support/Makefile (CFLAGS-support_paths.c): Add definition
for OBJDIR_ELF_LDSO_PATH.
* support/test-container.c (main): Search for the ld.so
which is also used by the testsuite.
Although CLDR says otherwise, it is confirmed by Oqaasileriffik, the
official Greenlandic language regulator, that this change is correct.
[BZ #20209]
* localedata/locales/kl_GL: (abday): Fix spelling of Sun (Sunday),
should be "sap" rather than "sab".
(day): Fix spelling of Sunday, should be "sapaat" rather than
"sabaat".
In my review
<https://sourceware.org/ml/libc-alpha/2018-06/msg00375.html> of a
patch for bug 23584, I expressed concern that the proposed changes
didn't deal with certain cases similar to the ones in the bug but
where test coverage was missing.
This patch adds such tests of fma (Inf, finite, finite) and fma
(finite, Inf, finite) to libm-test-fma.inc. It does *not* do anything
to fix the bug, simply adds test coverage to provide stronger evidence
of whether any proposed revised fix does address the cases I was
concerned with.
Tested for x86_64 and x86.
* math/libm-test-fma.inc (fma_test_data): Add more tests.
* with -O, -O1, -Os it fails with:
In file included from ../soft-fp/soft-fp.h:318,
from ../sysdeps/ieee754/soft-fp/s_fdiv.c:28:
../sysdeps/ieee754/soft-fp/s_fdiv.c: In function '__fdiv':
../soft-fp/op-2.h:98:25: error: 'R_f1' may be used uninitialized in this function [-Werror=maybe-uninitialized]
X##_f0 = (X##_f1 << (_FP_W_TYPE_SIZE - (N)) | X##_f0 >> (N) \
^~
../sysdeps/ieee754/soft-fp/s_fdiv.c:38:14: note: 'R_f1' was declared here
FP_DECL_D (R);
^
../soft-fp/op-2.h:37:36: note: in definition of macro '_FP_FRAC_DECL_2'
_FP_W_TYPE X##_f0 _FP_ZERO_INIT, X##_f1 _FP_ZERO_INIT
^
../soft-fp/double.h:95:24: note: in expansion of macro '_FP_DECL'
# define FP_DECL_D(X) _FP_DECL (2, X)
^~~~~~~~
../sysdeps/ieee754/soft-fp/s_fdiv.c:38:3: note: in expansion of macro 'FP_DECL_D'
FP_DECL_D (R);
^~~~~~~~~
../soft-fp/op-2.h:101:17: error: 'R_f0' may be used uninitialized in this function [-Werror=maybe-uninitialized]
: (X##_f0 << (_FP_W_TYPE_SIZE - (N))) != 0)); \
^~
../sysdeps/ieee754/soft-fp/s_fdiv.c:38:14: note: 'R_f0' was declared here
FP_DECL_D (R);
^
../soft-fp/op-2.h:37:14: note: in definition of macro '_FP_FRAC_DECL_2'
_FP_W_TYPE X##_f0 _FP_ZERO_INIT, X##_f1 _FP_ZERO_INIT
^
../soft-fp/double.h:95:24: note: in expansion of macro '_FP_DECL'
# define FP_DECL_D(X) _FP_DECL (2, X)
^~~~~~~~
../sysdeps/ieee754/soft-fp/s_fdiv.c:38:3: note: in expansion of macro 'FP_DECL_D'
FP_DECL_D (R);
^~~~~~~~~
Build tested with Yocto for ARM, AARCH64, X86, X86_64, PPC, MIPS, MIPS64
with -O, -O1, -Os.
For AARCH64 it needs one more fix in locale for -Os.
[BZ #19444]
* sysdeps/ieee754/soft-fp/s_fdiv.c: Include <libc-diag.h> and use
DIAG_PUSH_NEEDS_COMMENT, DIAG_IGNORE_NEEDS_COMMENT and
DIAG_POP_NEEDS_COMMENT to disable -Wmaybe-uninitialized.
Since RTM intrinsics are supported in GCC 4.9, we can use them in
pthread mutex lock elision.
* sysdeps/unix/sysv/linux/x86/Makefile (CFLAGS-elision-lock.c):
Add -mrtm.
(CFLAGS-elision-unlock.c): Likewise.
(CFLAGS-elision-timed.c): Likewise.
(CFLAGS-elision-trylock.c): Likewise.
* sysdeps/unix/sysv/linux/x86/hle.h: Rewritten.
As POSIX states [1] a freopen call should first flush the stream as if by a
call fflush. C99 (n1256) and C11 (n1570) only states the function should
first close any file associated with the specific stream. Although current
implementation only follow C specification, current BSD and other libc
implementation (musl) are in sync with POSIX and fflush the stream.
This patch change freopen{64} to fflush the stream before actually reopening
it (or returning if the stream does not support reopen). It also changes the
Linux implementation to avoid a dynamic allocation on 'fd_to_filename'.
Checked on x86_64-linux-gnu.
[BZ #21037]
* libio/Makefile (tests): Add tst-memstream4 and tst-wmemstream4.
* libio/freopen.c (freopen): Sync stream before reopen and adjust to
new fd_to_filename interface.
* libio/freopen64.c (freopen64): Likewise.
* libio/tst-memstream.h: New file.
* libio/tst-memstream4.c: Likewise.
* libio/tst-wmemstream4.c: Likewise.
* sysdeps/generic/fd_to_filename.h (fd_to_filename): Change signature.
* sysdeps/unix/sysv/linux/fd_to_filename.h (fd_to_filename): Likewise
and remove internal dynamic allocation.
[1] http://pubs.opengroup.org/onlinepubs/9699919799/
The MREMAP_* flags are identical between bits/mman-linux.h and the
hppa bits/mman.h; thus, they should be in bits/mman-shared.h instead
to avoid unnecessary duplication. This patch moves them there.
Tested for x86_64, and with build-many-glibcs.py.
* sysdeps/unix/sysv/linux/bits/mman-linux.h [__USE_GNU]
(MREMAP_MAYMOVE): Do not define here.
[__USE_GNU] (MREMAP_FIXED): Likewise.
* sysdeps/unix/sysv/linux/bits/mman-shared.h [__USE_GNU]
(MREMAP_MAYMOVE): Define here instead.
[__USE_GNU] (MREMAP_FIXED): Likewise.
* sysdeps/unix/sysv/linux/hppa/bits/mman.h [__USE_GNU]
(MREMAP_MAYMOVE): Remove.
[__USE_GNU] (MREMAP_FIXED): Likewise.
After my changes to move various macros, inlines and other content
from math_private.h to more specific headers, many files including
math_private.h no longer need to do so. Furthermore, since the
optimized inlines of various functions have been moved to
include/fenv.h or replaced by use of function names GCC inlines
automatically, a missing math_private.h include where one is
appropriate will reliably cause a build failure rather than possibly
causing code to be less well optimized while still building
successfully. Thus, this patch removes includes of math_private.h
that are now unnecessary. In the case of two RISC-V files, the
include is replaced by one of stdbool.h because the files in question
were relying on math_private.h to get a definition of bool.
Tested for x86_64 and x86, and with build-many-glibcs.py.
* math/fromfp.h: Do not include <math_private.h>.
* math/s_cacosh_template.c: Likewise.
* math/s_casin_template.c: Likewise.
* math/s_casinh_template.c: Likewise.
* math/s_ccos_template.c: Likewise.
* math/s_cproj_template.c: Likewise.
* math/s_fdim_template.c: Likewise.
* math/s_fmaxmag_template.c: Likewise.
* math/s_fminmag_template.c: Likewise.
* math/s_iseqsig_template.c: Likewise.
* math/s_ldexp_template.c: Likewise.
* math/s_nextdown_template.c: Likewise.
* math/w_log1p_template.c: Likewise.
* math/w_scalbln_template.c: Likewise.
* sysdeps/aarch64/fpu/feholdexcpt.c: Likewise.
* sysdeps/aarch64/fpu/fesetround.c: Likewise.
* sysdeps/aarch64/fpu/fgetexcptflg.c: Likewise.
* sysdeps/aarch64/fpu/ftestexcept.c: Likewise.
* sysdeps/aarch64/fpu/s_llrint.c: Likewise.
* sysdeps/aarch64/fpu/s_llrintf.c: Likewise.
* sysdeps/aarch64/fpu/s_lrint.c: Likewise.
* sysdeps/aarch64/fpu/s_lrintf.c: Likewise.
* sysdeps/i386/fpu/s_atanl.c: Likewise.
* sysdeps/i386/fpu/s_f32xaddf64.c: Likewise.
* sysdeps/i386/fpu/s_f32xsubf64.c: Likewise.
* sysdeps/i386/fpu/s_fdim.c: Likewise.
* sysdeps/i386/fpu/s_logbl.c: Likewise.
* sysdeps/i386/fpu/s_rintl.c: Likewise.
* sysdeps/i386/fpu/s_significandl.c: Likewise.
* sysdeps/ia64/fpu/s_matherrf.c: Likewise.
* sysdeps/ia64/fpu/s_matherrl.c: Likewise.
* sysdeps/ieee754/dbl-64/s_atan.c: Likewise.
* sysdeps/ieee754/dbl-64/s_cbrt.c: Likewise.
* sysdeps/ieee754/dbl-64/s_fma.c: Likewise.
* sysdeps/ieee754/dbl-64/s_fmaf.c: Likewise.
* sysdeps/ieee754/flt-32/s_cbrtf.c: Likewise.
* sysdeps/ieee754/k_standardf.c: Likewise.
* sysdeps/ieee754/k_standardl.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_copysignl.c: Likewise.
* sysdeps/ieee754/ldbl-64-128/s_finitel.c: Likewise.
* sysdeps/ieee754/ldbl-64-128/s_fpclassifyl.c: Likewise.
* sysdeps/ieee754/ldbl-64-128/s_isinfl.c: Likewise.
* sysdeps/ieee754/ldbl-64-128/s_isnanl.c: Likewise.
* sysdeps/ieee754/ldbl-64-128/s_signbitl.c: Likewise.
* sysdeps/ieee754/ldbl-96/s_cbrtl.c: Likewise.
* sysdeps/ieee754/ldbl-96/s_fma.c: Likewise.
* sysdeps/ieee754/ldbl-96/s_fmal.c: Likewise.
* sysdeps/ieee754/s_signgam.c: Likewise.
* sysdeps/powerpc/power5+/fpu/s_modf.c: Likewise.
* sysdeps/powerpc/power5+/fpu/s_modff.c: Likewise.
* sysdeps/powerpc/power7/fpu/s_logbf.c: Likewise.
* sysdeps/riscv/rv64/rvd/s_ceil.c: Likewise.
* sysdeps/riscv/rv64/rvd/s_floor.c: Likewise.
* sysdeps/riscv/rv64/rvd/s_nearbyint.c: Likewise.
* sysdeps/riscv/rv64/rvd/s_round.c: Likewise.
* sysdeps/riscv/rv64/rvd/s_roundeven.c: Likewise.
* sysdeps/riscv/rv64/rvd/s_trunc.c: Likewise.
* sysdeps/riscv/rvd/s_finite.c: Likewise.
* sysdeps/riscv/rvd/s_fmax.c: Likewise.
* sysdeps/riscv/rvd/s_fmin.c: Likewise.
* sysdeps/riscv/rvd/s_fpclassify.c: Likewise.
* sysdeps/riscv/rvd/s_isinf.c: Likewise.
* sysdeps/riscv/rvd/s_isnan.c: Likewise.
* sysdeps/riscv/rvd/s_issignaling.c: Likewise.
* sysdeps/riscv/rvf/fegetround.c: Likewise.
* sysdeps/riscv/rvf/feholdexcpt.c: Likewise.
* sysdeps/riscv/rvf/fesetenv.c: Likewise.
* sysdeps/riscv/rvf/fesetround.c: Likewise.
* sysdeps/riscv/rvf/feupdateenv.c: Likewise.
* sysdeps/riscv/rvf/fgetexcptflg.c: Likewise.
* sysdeps/riscv/rvf/ftestexcept.c: Likewise.
* sysdeps/riscv/rvf/s_ceilf.c: Likewise.
* sysdeps/riscv/rvf/s_finitef.c: Likewise.
* sysdeps/riscv/rvf/s_floorf.c: Likewise.
* sysdeps/riscv/rvf/s_fmaxf.c: Likewise.
* sysdeps/riscv/rvf/s_fminf.c: Likewise.
* sysdeps/riscv/rvf/s_fpclassifyf.c: Likewise.
* sysdeps/riscv/rvf/s_isinff.c: Likewise.
* sysdeps/riscv/rvf/s_isnanf.c: Likewise.
* sysdeps/riscv/rvf/s_issignalingf.c: Likewise.
* sysdeps/riscv/rvf/s_nearbyintf.c: Likewise.
* sysdeps/riscv/rvf/s_roundevenf.c: Likewise.
* sysdeps/riscv/rvf/s_roundf.c: Likewise.
* sysdeps/riscv/rvf/s_truncf.c: Likewise.
* sysdeps/riscv/rv64/rvd/s_rint.c: Include <stdbool.h> instead of
<math_private.h>.
* sysdeps/riscv/rvf/s_rintf.c: Likewise.
When elf_machine_runtime_setup is called to set up resolver, it should
use _dl_runtime_resolve_shstk or _dl_runtime_profile_shstk if SHSTK is
enabled by kernel.
Tested on i686 with and without --enable-cet as well as on CET emulator
with --enable-cet.
[BZ #23716]
* sysdeps/i386/dl-cet.c: Removed.
* sysdeps/i386/dl-machine.h (_dl_runtime_resolve_shstk): New
prototype.
(_dl_runtime_profile_shstk): Likewise.
(elf_machine_runtime_setup): Use _dl_runtime_profile_shstk or
_dl_runtime_resolve_shstk if SHSTK is enabled by kernel.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
The fallback code of Linux wrapper for preadv2/pwritev2 executes
regardless of the errno code for preadv2, instead of the case where
the syscall is not supported.
This fixes it by calling the fallback code iff errno is ENOSYS. The
patch also adds tests for both invalid file descriptor and invalid
iov_len and vector count.
The only discrepancy between preadv2 and fallback code regarding
error reporting is when an invalid flags are used. The fallback code
bails out earlier with ENOTSUP instead of EINVAL/EBADF when the syscall
is used.
Checked on x86_64-linux-gnu on a 4.4.0 and 4.15.0 kernel.
[BZ #23579]
* misc/tst-preadvwritev2-common.c (do_test_with_invalid_fd): New
test.
* misc/tst-preadvwritev2.c, misc/tst-preadvwritev64v2.c (do_test):
Call do_test_with_invalid_fd.
* sysdeps/unix/sysv/linux/preadv2.c (preadv2): Use fallback code iff
errno is ENOSYS.
* sysdeps/unix/sysv/linux/preadv64v2.c (preadv64v2): Likewise.
* sysdeps/unix/sysv/linux/pwritev2.c (pwritev2): Likewise.
* sysdeps/unix/sysv/linux/pwritev64v2.c (pwritev64v2): Likewise.
Continuing the move to use, within libm, public names for libm
functions that can be inlined as built-in functions on many
architectures, this patch moves calls to __round functions to call the
corresponding round names instead, with asm redirection to __round
when the calls are not inlined.
An additional complication arises in
sysdeps/ieee754/ldbl-128ibm/e_expl.c, where a call to roundl, with the
result converted to int, gets converted by the compiler to call
lroundl in the case of 32-bit long, so resulting in localplt test
failures. It's logically correct to let the compiler make such an
optimization; an appropriate asm redirection of lroundl to __lroundl
is thus added to that file (it's not needed anywhere else).
Tested for x86_64, and with build-many-glibcs.py.
* include/math.h [!_ISOMAC && !(__FINITE_MATH_ONLY__ &&
__FINITE_MATH_ONLY__ > 0) && !NO_MATH_REDIRECT] (round): Redirect
using MATH_REDIRECT.
* sysdeps/aarch64/fpu/s_round.c: Define NO_MATH_REDIRECT before
header inclusion.
* sysdeps/aarch64/fpu/s_roundf.c: Likewise.
* sysdeps/ieee754/dbl-64/s_round.c: Likewise.
* sysdeps/ieee754/dbl-64/wordsize-64/s_round.c: Likewise.
* sysdeps/ieee754/float128/s_roundf128.c: Likewise.
* sysdeps/ieee754/flt-32/s_roundf.c: Likewise.
* sysdeps/ieee754/ldbl-128/s_roundl.c: Likewise.
* sysdeps/ieee754/ldbl-96/s_roundl.c: Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_round.c: Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_roundf.c: Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_round.c: Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_roundf.c: Likewise.
* sysdeps/riscv/rv64/rvd/s_round.c: Likewise.
* sysdeps/riscv/rvf/s_roundf.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_roundl.c: Likewise.
(round): Redirect to __round.
(__roundl): Call round instead of __round.
* sysdeps/powerpc/fpu/math_private.h [_ARCH_PWR5X] (__round):
Remove macro.
[_ARCH_PWR5X] (__roundf): Likewise.
* sysdeps/ieee754/dbl-64/e_gamma_r.c (gamma_positive): Use round
functions instead of __round variants.
* sysdeps/ieee754/flt-32/e_gammaf_r.c (gammaf_positive): Likewise.
* sysdeps/ieee754/ldbl-128/e_gammal_r.c (gammal_positive):
Likewise.
* sysdeps/ieee754/ldbl-128ibm/e_gammal_r.c (gammal_positive):
Likewise.
* sysdeps/ieee754/ldbl-96/e_gammal_r.c (gammal_positive):
Likewise.
* sysdeps/x86/fpu/powl_helper.c (__powl_helper): Likewise.
* sysdeps/ieee754/ldbl-128ibm/e_expl.c (lroundl): Redirect to
__lroundl.
(__ieee754_expl): Call roundl instead of __roundl.
The function f1a, executed on a stack of size 32k, allocates an object of
size 32k on the stack. Make the stack variables static to reduce
excessive stack usage.
Continuing bits/mman.h unification between architectures using the
Linux kernel, this patch arranges for the common set of MAP_* flags to
be used by two more architectures. That common set is moved to
bits/mman-map-flags-generic.h, which is included by bits/mman.h, to
allow architectures to use that common set even if they also have
architecture-specific additions to it. As well as the generic
bits/mman.h, the versions for x86 and ia64 are also then made to
include bits/mman-map-flags-generic.h, so while they still need
architecture-specific bits/mman.h (for MAP_32BIT and MAP_GROWSUP
respectively), they do not need to duplicate the generic flag
definitions in there.
Tested for x86_64 and x86, and with build-many-glibcs.py.
* sysdeps/unix/sysv/linux/bits/mman-map-flags-generic.h: New
file. Most contents moved from ....
* sysdeps/unix/sysv/linux/bits/mman.h: ... here. Move contents to
and include <bits/mman-map-flags-generic.h>.
* sysdeps/unix/sysv/linux/Makefile [$(subdir) = misc]
(sysdep_headers): Add bits/mman-map-flags-generic.h.
* sysdeps/unix/sysv/linux/ia64/bits/mman.h: Include
<bits/mman-map-flags-generic.h>.
[__USE_MISC] (MAP_GROWSUP): Only define this macro, not other
macros defined in <bits/mman-map-flags-generic.h>.
* sysdeps/unix/sysv/linux/x86/bits/mman.h: Include
<bits/mman-map-flags-generic.h>.
[__USE_MISC] (MAP_32BIT): Only define this macro, not other macros
defined in <bits/mman-map-flags-generic.h>.
Currently, DT_TEXTREL is incompatible with IFUNC. When DT_TEXTREL or
DF_TEXTREL is seen, the dynamic linker calls __mprotect on the segments
with PROT_READ|PROT_WRITE before applying dynamic relocations. It leads
to segfault when performing IFUNC resolution (which requires PROT_EXEC
as well for the IFUNC resolver).
This patch makes it call __mprotect with extra PROT_WRITE bit, which
will keep the PROT_EXEC bit if exists, and thus fixes the segfault.
FreeBSD rtld libexec/rtld-elf/rtld.c (reloc_textrel_prot) does the same.
Checked on x86_64-linux-gnu, i686-linux-gnu, aarch64-linux-gnu,
sparc64-linux-gnu, sparcv9-linux-gnu, and armv8-linux-gnueabihf.
Adam J. Richte <adam_richter2004@yahoo.com>
Adhemerval Zanella <adhemerval.zanella@linaro.org>
Fangrui Song <maskray@google.com>
[BZ #20480]
* config.h.in (CAN_TEXTREL_IFUNC): New define.
* configure.ac: Add check if linker supports textrel relocation with
ifunc.
* elf/dl-reloc.c (_dl_relocate_object): Use all required flags on
DT_TEXTREL segments, not only PROT_READ and PROT_WRITE.
* elf/Makefile (ifunc-pie-tests): Add tst-ifunc-textrel.
(CFLAGS-tst-ifunc-textrel.c): New rule.
* elf/tst-ifunc-textrel.c: New file.
This patch completes the process of unifying sys/procfs.h headers for
architectures using the Linux kernel by making alpha use the generic
version.
That was previously deferred because alpha has different definitions
of prgregset_t and prfpregset_t from other architectures, so changing
to the common definitions would change C++ name mangling. To avoid
such a change, a header bits/procfs-prregset.h is added, and alpha
gets its own version of that header.
Tested for x86_64 and x86, and with build-many-glibcs.py.
* sysdeps/unix/sysv/linux/sys/procfs.h: Include
<bits/procfs-prregset.h>.
(prgregset_t): Define using __prgregset_t.
(prfpregset_t): Define using __prfpregset_t.
* sysdeps/unix/sysv/linux/Makefile [$(subdir) = misc]
(sysdep_headers): Add bits/procfs-prregset.h.
* sysdeps/unix/sysv/linux/bits/procfs-prregset.h: New file.
* sysdeps/unix/sysv/linux/alpha/bits/procfs-prregset.h: Likewise.
* sysdeps/unix/sysv/linux/alpha/bits/procfs.h: Likewise.
* sysdeps/unix/sysv/linux/alpha/sys/procfs.h: Remove file.
This patch continues the process of unifying sys/procfs.h headers for
architectures using the Linux kernel.
A bits/procfs-id.h header is added to define __pr_uid_t and __pr_gid_t
for the types of pr_uid and pr_gid; the default version of this header
uses unsigned int. On some architectures, sys/procfs.h has copies of
32-bit structures for 64-bit builds; those move into a
bits/procfs-extra.h header (they can't go in bits/procfs.h because
they have to come *after* other declarations from sys/procfs.h).
Given appropriate versions of these headers, six more architectures
can then move to providing only bits/procfs*.h without duplicating the
rest of the contents of sys/procfs.h. Only alpha needs a further
bits/ header to be added before it can stop having its own
sys/procfs.h.
Tested for x86_64 and x86, and with build-many-glibcs.py.
* sysdeps/unix/sysv/linux/sys/procfs.h: Include
<bits/procfs-id.h> and <bits/procfs-extra.h>.
(struct elf_prpsinfo): Use __pr_uid_t and __pr_gid_t as types of
pr_uid and pr_gid.
* sysdeps/unix/sysv/linux/Makefile [$(subdir) = misc]
(sysdep_headers): Add bits/procfs-id.h and bits/procfs-extra.h.
* sysdeps/unix/sysv/linux/bits/procfs-extra.h: New file.
* sysdeps/unix/sysv/linux/bits/procfs-id.h: Likewise.
* sysdeps/unix/sysv/linux/arm/bits/procfs-id.h: Likewise.
* sysdeps/unix/sysv/linux/arm/bits/procfs.h: Likewise.
* sysdeps/unix/sysv/linux/m68k/bits/procfs-id.h: Likewise.
* sysdeps/unix/sysv/linux/m68k/bits/procfs.h: Likewise.
* sysdeps/unix/sysv/linux/s390/bits/procfs-extra.h: Likewise.
* sysdeps/unix/sysv/linux/s390/bits/procfs-id.h: Likewise.
* sysdeps/unix/sysv/linux/s390/bits/procfs.h: Likewise.
* sysdeps/unix/sysv/linux/sh/bits/procfs-id.h: Likewise.
* sysdeps/unix/sysv/linux/sh/bits/procfs.h: Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/procfs-extra.h: Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/procfs-id.h: Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/procfs.h: Likewise.
* sysdeps/unix/sysv/linux/x86/bits/procfs-id.h: Likewise.
* sysdeps/unix/sysv/linux/x86/bits/procfs.h: Likewise.
* sysdeps/unix/sysv/linux/arm/sys/procfs.h: Remove file.
* sysdeps/unix/sysv/linux/m68k/sys/procfs.h: Likewise.
* sysdeps/unix/sysv/linux/s390/sys/procfs.h: Likewise.
* sysdeps/unix/sysv/linux/sh/sys/procfs.h: Likewise.
* sysdeps/unix/sysv/linux/sparc/sys/procfs.h: Likewise.
* sysdeps/unix/sysv/linux/x86/sys/procfs.h: Likewise.
As per recent discussions, this patch unifies some of the sys/procfs.h
headers for architectures using the Linux kernel, producing a generic
version that can hopefully be used by all new architectures as well.
The new generic version is based on the AArch64 one. The register
definitions, the only part that generally needs to vary by
architecture, go in a new bits/procfs.h header (which each
architecture using the generic version needs to provide); that header
also has any #includes that were in the architecture-specific
sys/procfs.h, where those includes went beyond the generic set.
The generic version is used for eight architectures where the generic
definitions were the same as the architecture-specific ones. (Some of
those architectures had #if 0 fields, now removed; some defined types
or fields using different type names which were typedefs for the same
underlying types.)
Six of the remaining architectures with their own sys/procfs.h use
unsigned short for pr_uid / pr_gid in some cases; moving those to the
generic header will require a bits/ header to define a typedef for the
type of those fields. In the case of alpha, the generic sys/procfs.h
uses elf_gregset_t (= unsigned long int[33]) to define prgregset_t and
elf_fpregset_t (= double[32]) to define prfpregset_t, but the alpha
version uses gregset_t (= long int[33]) and fpregset_t (= long
int[32]), so avoiding unnecessarily changing the underlying types (and
thus C++ name mangling) again means a bits/ header will need to be
able to define a different choice for those typedefs.
bits/procfs.h is included outside the __BEGIN_DECLS / __END_DECLS pair
(whereas the definitions it contains were previously inside that pair
in various sys/procfs.h headers), because it sometimes includes other
headers and putting those other #includes inside that pair seems
risky. Because none of the declarations in bits/procfs.h are of
functions or variables or involve function types, I don't think it
makes any difference whether they are inside or outside an extern "C"
context.
Tested with build-many-glibcs.py (again, that does not provide much
validation for the correctness of this patch).
* sysdeps/unix/sysv/linux/sys/procfs.h: Replace with file based on
AArch64 version. Include <bits/procfs.h>.
* sysdeps/unix/sysv/linux/Makefile [$(subdir) = misc]
(sysdep_headers): Add bits/procfs.h.
* sysdeps/unix/sysv/linux/bits/procfs.h: New file.
* sysdeps/unix/sysv/linux/aarch64/bits/procfs.h: Likewise.
* sysdeps/unix/sysv/linux/hppa/bits/procfs.h: Likewise.
* sysdeps/unix/sysv/linux/ia64/bits/procfs.h: Likewise.
* sysdeps/unix/sysv/linux/microblaze/bits/procfs.h: Likewise.
* sysdeps/unix/sysv/linux/mips/bits/procfs.h: Likewise.
* sysdeps/unix/sysv/linux/nios2/bits/procfs.h: Likewise.
* sysdeps/unix/sysv/linux/powerpc/bits/procfs.h: Likewise.
* sysdeps/unix/sysv/linux/riscv/bits/procfs.h: Likewise.
* sysdeps/unix/sysv/linux/aarch64/sys/procfs.h: Remove file.
* sysdeps/unix/sysv/linux/hppa/sys/procfs.h: Likewise.
* sysdeps/unix/sysv/linux/ia64/sys/procfs.h: Likewise.
* sysdeps/unix/sysv/linux/microblaze/sys/procfs.h: Likewise.
* sysdeps/unix/sysv/linux/mips/sys/procfs.h: Likewise.
* sysdeps/unix/sysv/linux/nios2/sys/procfs.h: Likewise.
* sysdeps/unix/sysv/linux/powerpc/sys/procfs.h: Likewise.
* sysdeps/unix/sysv/linux/riscv/sys/procfs.h: Likewise.
The variables __gconv_path_elem, __gconv_max_path_elem_len and function
__gconv_get_path declared in, as well as the type path_elem and macro
GCONV_NCHAR_GOAL defined in gconv_int.h are all used in only one iconv
compilation unit each. In addition, the extern declaration of the variable
__gconv_nmodules refers to a variable that does not exist any more.
Considering this, these symbols do not need to be exposed via a header file.
This patch removes the extern declarations from the header file and moves
the definitions to the compilation units where they are used.
For architectures and ABIs that are added in version 2.29 or later the
option --enable-obsolete-nsl is no longer available, and no libnsl
compatibility library is built.
Linux from 3.9 through 4.2 does not abort HTM transaction on syscalls,
instead it suspend and resume it when leaving the kernel. The
side-effects of the syscall will always remain visible, even if the
transaction is aborted. This is an issue when transaction is used along
with futex syscall, on pthread_cond_wait for instance, where the futex
call might succeed but the transaction is rolled back leading the
pthread_cond object in an inconsistent state.
Glibc used to prevent it by always aborting a transaction before issuing
a syscall. Linux 4.2 also decided to abort active transaction in
syscalls which makes the glibc workaround superfluous. Worse, glibc
transaction abortion leads to a performance issue on recent kernels
where the HTM state is saved/restore lazily (v4.9). By aborting a
transaction on every syscalls, regardless whether a transaction has being
initiated before, GLIBS makes the kernel always save/restore HTM state
(it can not even lazily disable it after a certain number of syscall
iterations).
Because of this shortcoming, Transactional Lock Elision is just enabled
when it has been explicitly set (either by tunables of by a configure
switch) and if kernel aborts HTM transactions on syscalls
(PPC_FEATURE2_HTM_NOSC). It is reported that using simple benchmark [1],
the context-switch is about 5% faster by not issuing a tabort in every
syscall in newer kernels.
Checked on powerpc64le-linux-gnu with 4.4.0 kernel (Ubuntu 16.04).
* NEWS: Add note about new TLE support on powerpc64le.
* sysdeps/powerpc/nptl/tcb-offsets.sym (TM_CAPABLE): Remove.
* sysdeps/powerpc/nptl/tls.h (tcbhead_t): Rename tm_capable to
__ununsed1.
(TLS_INIT_TP, TLS_DEFINE_INIT_TP): Remove tm_capable setup.
(THREAD_GET_TM_CAPABLE, THREAD_SET_TM_CAPABLE): Remove macros.
* sysdeps/powerpc/powerpc32/sysdep.h,
sysdeps/powerpc/powerpc64/sysdep.h (ABORT_TRANSACTION_IMPL,
ABORT_TRANSACTION): Remove macros.
* sysdeps/powerpc/sysdep.h (ABORT_TRANSACTION): Likewise.
* sysdeps/unix/sysv/linux/powerpc/elision-conf.c (elision_init): Set
__pthread_force_elision iff PPC_FEATURE2_HTM_NOSC is set.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/sysdep.h,
sysdeps/unix/sysv/linux/powerpc/powerpc64/sysdep.h
sysdeps/unix/sysv/linux/powerpc/syscall.S (ABORT_TRANSACTION): Remove
usage.
* sysdeps/unix/sysv/linux/powerpc/not-errno.h: Remove file.
Reported-by: Breno Leitão <leitao@debian.org>
Synchronize some values with CLDR and apply some suggestions from Bugzilla.
[BZ #10425]
* localedata/locales/it_IT (d_t_fmt): Use "%a %-d %b %Y, %T".
(date_fmt): Use "%a %-d %b %Y, %T, %Z".
* localedata/locales/it_CH (d_t_fmt): Use "%a %-d %b %Y, %T"
which is the same as in it_IT.
(d_fmt): Use "%d.%m.%Y" which is the same as in de_CH.
(date_fmt): Use "%a %-d %b %Y, %T, %Z" which is the same as in it_IT.
I noticed that sysdeps/x86/cpu-features.h had conditionals on whether
to define HAS_CPUID, HAS_I586 and HAS_I686 with a long list of
preprocessor macros for i686-and-later processors which however was
out of date. This patch avoids the problem of the list getting out of
date by instead having conditionals on all the (few, old) pre-i686
processors for which GCC has preprocessor macros, rather than the
(many, expanding list) i686-and-later processors. It seems HAS_I586
and HAS_I686 are unused so the only effect of these macros being
missing is that 32-bit glibc built for one of these processors would
end up doing runtime detection of CPUID availability.
i386 builds are prevented by a configure test so there is no need to
allow for them here. __geode__ (no long nops?) and __k6__ (no CMOV,
at least according to GCC) are conservatively handled as i586, not
i686, here (as noted above, this is a theoretical distinction at
present in that only HAS_CPUID appears to be used).
Tested for x86.
* sysdeps/x86/cpu-features.h [__geode__ || __k6__]: Handle like
[__i586__ || __pentium__].
[__i486__]: Handle explicitly.
(HAS_CPUID): Define to 1 if above macros are undefined.
(HAS_I586): Likewise.
(HAS_I686): Likewise.
If the compiler reduces the stack usage in function f1 before calling
into function f2, then when we swapcontext back to f1 and continue
execution we may overwrite registers that were spilled to the stack
while f2 was executing. Later when we return to f2 the corrupt
registers will be reloaded from the stack and the test will crash. This
was most commonly observed on i686 with __x86.get_pc_thunk.dx and
needing to save and restore $edx. Overall i686 has few registers and
the spilling to the stack is bound to happen, therefore the solution to
making this test robust is to split function f1 into two parts f1a and
f1b, and allocate f1b it's own stack such that subsequent execution does
not overwrite the stack in use by function f2.
Tested on i686 and x86_64.
Signed-off-by: Carlos O'Donell <carlos@redhat.com>
[BZ #23603]
* include/time.h (__mktime_internal): The localtime offset is now
of type long int instead of time_t. This is the longstanding type
in glibc, and it is more than enough to represent difference
between localtime and gmtime even if it is 32 bits and time_t is
64. Changing it now will let us avoid an unnecessary change when
time_t is widened to 64 bits on 32-bit platforms.
* time/mktime-internal.h (mktime_offset_t): Now long int.
[BZ #23603][BZ #16346]
This fixes some obscure problems with integer overflow.
Although it looks scary, it is almost all a byte-for-byte copy
from Gnulib, and the Gnulib code has been tested reasonably well.
* include/intprops.h: New file, copied from Gnulib.
* include/verify.h, time/mktime-internal.h:
New tiny files, simplified from Gnulib.
* time/mktime.c: Copy from Gnulib. This has the following changes:
Do not include config.h if DEBUG_MKTIME is nonzero.
Include stdbool.h, intprops.h, verify.h.
Include string.h only if needed.
Include stdlib.h on MS-Windows.
Include mktime-internal.h.
(DEBUG_MKTIME): Default to 0, and simplify later uses.
(NEED_MKTIME_INTERNAL, NEED_MKTIME_WINDOWS)
(NEED_MKTIME_WORKING): Give default values to pacify -Wundef,
which glibc uses. Default NEED_MKTIME_WORKING to DEBUG_MKTIME, to
simplify later conditionals; default the others to zero. Use
these conditionals to express only the code needed on the current
platform. In uses of these conditionals, explicitly spell out how
_LIBC affects things, so it’s easier to review from a glibc
viewpoint.
(WRAPV): Remove; no longer needed now that we have
systematic overflow checking.
(my_tzset, __tzset) [!_LIBC]: New function and macro, to better
compartmentalize tzset issues. Move system-dependent tzsettish
code here from mktime.
(verify): Remove; now done by verify.h. All uses changed.
(long_int): Use a more-conservative definition, to avoid
integer overflow.
(SHR): Remove, replacing with ...
(shr): New function, which means we needn’t worry about side
effects in args, and conversion analysis is simpler.
(TYPE_IS_INTEGER, TYPE_TWOS_COMPLEMENT, TYPE_SIGNED, TYPE_MINIMUM)
(TYPE_MAXIMUM, TIME_T_MIN, TIME_T_MAX, TIME_T_MIDPOINT)
(time_t_avg, time_t_add_ok): Remove.
(mktime_min, mktime_max): New constants.
(leapyear, isdst_differ): Use bool for booleans.
(ydhms_diff, guess_time_tm, ranged_convert, __mktime_internal):
Use long_int, not time_t, for mktime differences.
(long_int_avg): New function, replacing time_t_avg.
INT_ADD_WRAPV replaces time_t_add_ok.
(guess_time_tm): 6th arg is now long_int, not time_t const *.
All uses changed.
(convert_time): New function.
(ranged_convert): Use it.
(__mktime_internal): Last arg now points to mktime_offset_t, not
time_t. All uses changed. This is a no-op on glibc, where
mktime_offset_t is always time_t. Use int, not time_t, for UTC
offset guess. Directly check for integer overflow instead of
using a heuristic that works only 99.9...% of the time.
Access *OFFSET only once, to avoid an unlikely race if the
compiler delays a load and if this cascades into a signed integer
overflow.
(mktime): Move tzsettish code to my_tzset, and move
localtime_offset to within mktime so that it doesn’t
need a separate ifdef.
(main) [DEBUG_MKTIME]: Speed up by using localtime_r
instead of localtime.
* time/timegm.c: Copy from Gnulib. This has the following changes:
Include mktime-internal.h.
[!_LIBC]: Include config.h and time.h. Do not include
timegm.h or time_r.h. Make __mktime_internal a macro,
and include mktime-internal.h to get its declaration.
(timegm): Temporary is now mktime_offset_t, not time_t.
This affects only Gnulib.
The generic strstr in GLIBC 2.28 fails to match huge needles. The optimized
AVAILABLE macro reads ahead a large fixed amount to reduce the overhead of
repeatedly checking for the end of the string. However if the needle length
is larger than this, two_way_long_needle may confuse this as meaning the end
of the string and return NULL. This is fixed by adding the needle length to
the amount to read ahead.
[BZ #23637]
* string/test-strstr.c (pr23637): New function.
(test_main): Add tests with longer needles.
* string/strcasestr.c (AVAILABLE): Fix readahead distance.
* string/strstr.c (AVAILABLE): Likewise.
