glibc/sysdeps/ia64/fpu/e_sinhf.S
Siddhesh Poyarekar 30891f35fa Remove "Contributed by" lines
We stopped adding "Contributed by" or similar lines in sources in 2012
in favour of git logs and keeping the Contributors section of the
glibc manual up to date.  Removing these lines makes the license
header a bit more consistent across files and also removes the
possibility of error in attribution when license blocks or files are
copied across since the contributed-by lines don't actually reflect
reality in those cases.

Move all "Contributed by" and similar lines (Written by, Test by,
etc.) into a new file CONTRIBUTED-BY to retain record of these
contributions.  These contributors are also mentioned in
manual/contrib.texi, so we just maintain this additional record as a
courtesy to the earlier developers.

The following scripts were used to filter a list of files to edit in
place and to clean up the CONTRIBUTED-BY file respectively.  These
were not added to the glibc sources because they're not expected to be
of any use in future given that this is a one time task:

https://gist.github.com/siddhesh/b5ecac94eabfd72ed2916d6d8157e7dc
https://gist.github.com/siddhesh/15ea1f5e435ace9774f485030695ee02

Reviewed-by: Carlos O'Donell <carlos@redhat.com>
2021-09-03 22:06:44 +05:30

749 lines
21 KiB
ArmAsm

.file "sinhf.s"
// Copyright (c) 2000 - 2005, Intel Corporation
// All rights reserved.
//
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are
// met:
//
// * Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
//
// * Redistributions in binary form must reproduce the above copyright
// notice, this list of conditions and the following disclaimer in the
// documentation and/or other materials provided with the distribution.
//
// * The name of Intel Corporation may not be used to endorse or promote
// products derived from this software without specific prior written
// permission.
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL INTEL OR ITS
// CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
// EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
// PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
// PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
// OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY OR TORT (INCLUDING
// NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
// SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
//
// Intel Corporation is the author of this code, and requests that all
// problem reports or change requests be submitted to it directly at
// http://www.intel.com/software/products/opensource/libraries/num.htm.
// History
//*********************************************************************
// 02/02/00 Initial version
// 04/04/00 Unwind support added
// 08/15/00 Bundle added after call to __libm_error_support to properly
// set [the previously overwritten] GR_Parameter_RESULT.
// 10/12/00 Update to set denormal operand and underflow flags
// 01/22/01 Fixed to set inexact flag for small args.
// 05/02/01 Reworked to improve speed of all paths
// 05/20/02 Cleaned up namespace and sf0 syntax
// 11/20/02 Improved algorithm based on expf
// 03/31/05 Reformatted delimiters between data tables
//
// API
//*********************************************************************
// float sinhf(float)
//
// Overview of operation
//*********************************************************************
// Case 1: 0 < |x| < 2^-60
// Result = x, computed by x+sgn(x)*x^2) to handle flags and rounding
//
// Case 2: 2^-60 < |x| < 0.25
// Evaluate sinh(x) by a 9th order polynomial
// Care is take for the order of multiplication; and A2 is not exactly 1/5!,
// A3 is not exactly 1/7!, etc.
// sinh(x) = x + (A1*x^3 + A2*x^5 + A3*x^7 + A4*x^9)
//
// Case 3: 0.25 < |x| < 89.41598
// Algorithm is based on the identity sinh(x) = ( exp(x) - exp(-x) ) / 2.
// The algorithm for exp is described as below. There are a number of
// economies from evaluating both exp(x) and exp(-x). Although we
// are evaluating both quantities, only where the quantities diverge do we
// duplicate the computations. The basic algorithm for exp(x) is described
// below.
//
// Take the input x. w is "how many log2/128 in x?"
// w = x * 64/log2
// NJ = int(w)
// x = NJ*log2/64 + R
// NJ = 64*n + j
// x = n*log2 + (log2/64)*j + R
//
// So, exp(x) = 2^n * 2^(j/64)* exp(R)
//
// T = 2^n * 2^(j/64)
// Construct 2^n
// Get 2^(j/64) table
// actually all the entries of 2^(j/64) table are stored in DP and
// with exponent bits set to 0 -> multiplication on 2^n can be
// performed by doing logical "or" operation with bits presenting 2^n
// exp(R) = 1 + (exp(R) - 1)
// P = exp(R) - 1 approximated by Taylor series of 3rd degree
// P = A3*R^3 + A2*R^2 + R, A3 = 1/6, A2 = 1/2
//
// The final result is reconstructed as follows
// exp(x) = T + T*P
// Special values
//*********************************************************************
// sinhf(+0) = +0
// sinhf(-0) = -0
// sinhf(+qnan) = +qnan
// sinhf(-qnan) = -qnan
// sinhf(+snan) = +qnan
// sinhf(-snan) = -qnan
// sinhf(-inf) = -inf
// sinhf(+inf) = +inf
// Overflow and Underflow
//*********************************************************************
// sinhf(x) = largest single normal when
// x = 89.41598 = 0x42b2d4fc
//
// Underflow is handled as described in case 1 above
// Registers used
//*********************************************************************
// Floating Point registers used:
// f8 input, output
// f6,f7, f9 -> f15, f32 -> f45
// General registers used:
// r2, r3, r16 -> r38
// Predicate registers used:
// p6 -> p15
// Assembly macros
//*********************************************************************
// integer registers used
// scratch
rNJ = r2
rNJ_neg = r3
rJ_neg = r16
rN_neg = r17
rSignexp_x = r18
rExp_x = r18
rExp_mask = r19
rExp_bias = r20
rAd1 = r21
rAd2 = r22
rJ = r23
rN = r24
rTblAddr = r25
rA3 = r26
rExpHalf = r27
rLn2Div64 = r28
rGt_ln = r29
r17ones_m1 = r29
rRightShifter = r30
rJ_mask = r30
r64DivLn2 = r31
rN_mask = r31
// stacked
GR_SAVE_PFS = r32
GR_SAVE_B0 = r33
GR_SAVE_GP = r34
GR_Parameter_X = r35
GR_Parameter_Y = r36
GR_Parameter_RESULT = r37
GR_Parameter_TAG = r38
// floating point registers used
FR_X = f10
FR_Y = f1
FR_RESULT = f8
// scratch
fRightShifter = f6
f64DivLn2 = f7
fNormX = f9
fNint = f10
fN = f11
fR = f12
fLn2Div64 = f13
fA2 = f14
fA3 = f15
// stacked
fP = f32
fT = f33
fMIN_SGL_OFLOW_ARG = f34
fMAX_SGL_NORM_ARG = f35
fRSqr = f36
fA1 = f37
fA21 = f37
fA4 = f38
fA43 = f38
fA4321 = f38
fX4 = f39
fTmp = f39
fGt_pln = f39
fWre_urm_f8 = f40
fXsq = f40
fP_neg = f41
fX3 = f41
fT_neg = f42
fExp = f43
fExp_neg = f44
fAbsX = f45
RODATA
.align 16
LOCAL_OBJECT_START(_sinhf_table)
data4 0x42b2d4fd // Smallest single arg to overflow single result
data4 0x42b2d4fc // Largest single arg to give normal single result
data4 0x00000000 // pad
data4 0x00000000 // pad
//
// 2^(j/64) table, j goes from 0 to 63
data8 0x0000000000000000 // 2^(0/64)
data8 0x00002C9A3E778061 // 2^(1/64)
data8 0x000059B0D3158574 // 2^(2/64)
data8 0x0000874518759BC8 // 2^(3/64)
data8 0x0000B5586CF9890F // 2^(4/64)
data8 0x0000E3EC32D3D1A2 // 2^(5/64)
data8 0x00011301D0125B51 // 2^(6/64)
data8 0x0001429AAEA92DE0 // 2^(7/64)
data8 0x000172B83C7D517B // 2^(8/64)
data8 0x0001A35BEB6FCB75 // 2^(9/64)
data8 0x0001D4873168B9AA // 2^(10/64)
data8 0x0002063B88628CD6 // 2^(11/64)
data8 0x0002387A6E756238 // 2^(12/64)
data8 0x00026B4565E27CDD // 2^(13/64)
data8 0x00029E9DF51FDEE1 // 2^(14/64)
data8 0x0002D285A6E4030B // 2^(15/64)
data8 0x000306FE0A31B715 // 2^(16/64)
data8 0x00033C08B26416FF // 2^(17/64)
data8 0x000371A7373AA9CB // 2^(18/64)
data8 0x0003A7DB34E59FF7 // 2^(19/64)
data8 0x0003DEA64C123422 // 2^(20/64)
data8 0x0004160A21F72E2A // 2^(21/64)
data8 0x00044E086061892D // 2^(22/64)
data8 0x000486A2B5C13CD0 // 2^(23/64)
data8 0x0004BFDAD5362A27 // 2^(24/64)
data8 0x0004F9B2769D2CA7 // 2^(25/64)
data8 0x0005342B569D4F82 // 2^(26/64)
data8 0x00056F4736B527DA // 2^(27/64)
data8 0x0005AB07DD485429 // 2^(28/64)
data8 0x0005E76F15AD2148 // 2^(29/64)
data8 0x0006247EB03A5585 // 2^(30/64)
data8 0x0006623882552225 // 2^(31/64)
data8 0x0006A09E667F3BCD // 2^(32/64)
data8 0x0006DFB23C651A2F // 2^(33/64)
data8 0x00071F75E8EC5F74 // 2^(34/64)
data8 0x00075FEB564267C9 // 2^(35/64)
data8 0x0007A11473EB0187 // 2^(36/64)
data8 0x0007E2F336CF4E62 // 2^(37/64)
data8 0x00082589994CCE13 // 2^(38/64)
data8 0x000868D99B4492ED // 2^(39/64)
data8 0x0008ACE5422AA0DB // 2^(40/64)
data8 0x0008F1AE99157736 // 2^(41/64)
data8 0x00093737B0CDC5E5 // 2^(42/64)
data8 0x00097D829FDE4E50 // 2^(43/64)
data8 0x0009C49182A3F090 // 2^(44/64)
data8 0x000A0C667B5DE565 // 2^(45/64)
data8 0x000A5503B23E255D // 2^(46/64)
data8 0x000A9E6B5579FDBF // 2^(47/64)
data8 0x000AE89F995AD3AD // 2^(48/64)
data8 0x000B33A2B84F15FB // 2^(49/64)
data8 0x000B7F76F2FB5E47 // 2^(50/64)
data8 0x000BCC1E904BC1D2 // 2^(51/64)
data8 0x000C199BDD85529C // 2^(52/64)
data8 0x000C67F12E57D14B // 2^(53/64)
data8 0x000CB720DCEF9069 // 2^(54/64)
data8 0x000D072D4A07897C // 2^(55/64)
data8 0x000D5818DCFBA487 // 2^(56/64)
data8 0x000DA9E603DB3285 // 2^(57/64)
data8 0x000DFC97337B9B5F // 2^(58/64)
data8 0x000E502EE78B3FF6 // 2^(59/64)
data8 0x000EA4AFA2A490DA // 2^(60/64)
data8 0x000EFA1BEE615A27 // 2^(61/64)
data8 0x000F50765B6E4540 // 2^(62/64)
data8 0x000FA7C1819E90D8 // 2^(63/64)
LOCAL_OBJECT_END(_sinhf_table)
LOCAL_OBJECT_START(sinh_p_table)
data8 0x3ec749d84bc96d7d // A4
data8 0x3f2a0168d09557cf // A3
data8 0x3f811111326ed15a // A2
data8 0x3fc55555552ed1e2 // A1
LOCAL_OBJECT_END(sinh_p_table)
.section .text
GLOBAL_IEEE754_ENTRY(sinhf)
{ .mlx
getf.exp rSignexp_x = f8 // Must recompute if x unorm
movl r64DivLn2 = 0x40571547652B82FE // 64/ln(2)
}
{ .mlx
addl rTblAddr = @ltoff(_sinhf_table),gp
movl rRightShifter = 0x43E8000000000000 // DP Right Shifter
}
;;
{ .mfi
// point to the beginning of the table
ld8 rTblAddr = [rTblAddr]
fclass.m p6, p0 = f8, 0x0b // Test for x=unorm
addl rA3 = 0x3E2AA, r0 // high bits of 1.0/6.0 rounded to SP
}
{ .mfi
nop.m 0
fnorm.s1 fNormX = f8 // normalized x
addl rExpHalf = 0xFFFE, r0 // exponent of 1/2
}
;;
{ .mfi
setf.d f64DivLn2 = r64DivLn2 // load 64/ln(2) to FP reg
fclass.m p15, p0 = f8, 0x1e3 // test for NaT,NaN,Inf
nop.i 0
}
{ .mlx
// load Right Shifter to FP reg
setf.d fRightShifter = rRightShifter
movl rLn2Div64 = 0x3F862E42FEFA39EF // DP ln(2)/64 in GR
}
;;
{ .mfi
mov rExp_mask = 0x1ffff
fcmp.eq.s1 p13, p0 = f0, f8 // test for x = 0.0
shl rA3 = rA3, 12 // 0x3E2AA000, approx to 1.0/6.0 in SP
}
{ .mfb
nop.m 0
nop.f 0
(p6) br.cond.spnt SINH_UNORM // Branch if x=unorm
}
;;
SINH_COMMON:
{ .mfi
setf.exp fA2 = rExpHalf // load A2 to FP reg
nop.f 0
mov rExp_bias = 0xffff
}
{ .mfb
setf.d fLn2Div64 = rLn2Div64 // load ln(2)/64 to FP reg
(p15) fma.s.s0 f8 = f8, f1, f0 // result if x = NaT,NaN,Inf
(p15) br.ret.spnt b0 // exit here if x = NaT,NaN,Inf
}
;;
{ .mfi
// min overflow and max normal threshold
ldfps fMIN_SGL_OFLOW_ARG, fMAX_SGL_NORM_ARG = [rTblAddr], 8
nop.f 0
and rExp_x = rExp_mask, rSignexp_x // Biased exponent of x
}
{ .mfb
setf.s fA3 = rA3 // load A3 to FP reg
nop.f 0
(p13) br.ret.spnt b0 // exit here if x=0.0, return x
}
;;
{ .mfi
sub rExp_x = rExp_x, rExp_bias // True exponent of x
fmerge.s fAbsX = f0, fNormX // Form |x|
nop.i 0
}
;;
{ .mfi
nop.m 0
// x*(64/ln(2)) + Right Shifter
fma.s1 fNint = fNormX, f64DivLn2, fRightShifter
add rTblAddr = 8, rTblAddr
}
{ .mfb
cmp.gt p7, p0 = -2, rExp_x // Test |x| < 2^(-2)
fma.s1 fXsq = fNormX, fNormX, f0 // x*x for small path
(p7) br.cond.spnt SINH_SMALL // Branch if 0 < |x| < 2^-2
}
;;
{ .mfi
nop.m 0
// check for overflow
fcmp.ge.s1 p12, p13 = fAbsX, fMIN_SGL_OFLOW_ARG
mov rJ_mask = 0x3f // 6-bit mask for J
}
;;
{ .mfb
nop.m 0
fms.s1 fN = fNint, f1, fRightShifter // n in FP register
// branch out if overflow
(p12) br.cond.spnt SINH_CERTAIN_OVERFLOW
}
;;
{ .mfi
getf.sig rNJ = fNint // bits of n, j
// check for possible overflow
fcmp.gt.s1 p13, p0 = fAbsX, fMAX_SGL_NORM_ARG
nop.i 0
}
;;
{ .mfi
addl rN = 0xFFBF - 63, rNJ // biased and shifted n-1,j
fnma.s1 fR = fLn2Div64, fN, fNormX // R = x - N*ln(2)/64
and rJ = rJ_mask, rNJ // bits of j
}
{ .mfi
sub rNJ_neg = r0, rNJ // bits of n, j for -x
nop.f 0
andcm rN_mask = -1, rJ_mask // 0xff...fc0 to mask N
}
;;
{ .mfi
shladd rJ = rJ, 3, rTblAddr // address in the 2^(j/64) table
nop.f 0
and rN = rN_mask, rN // biased, shifted n-1
}
{ .mfi
addl rN_neg = 0xFFBF - 63, rNJ_neg // -x biased, shifted n-1,j
nop.f 0
and rJ_neg = rJ_mask, rNJ_neg // bits of j for -x
}
;;
{ .mfi
ld8 rJ = [rJ] // Table value
nop.f 0
shl rN = rN, 46 // 2^(n-1) bits in DP format
}
{ .mfi
shladd rJ_neg = rJ_neg, 3, rTblAddr // addr in 2^(j/64) table -x
nop.f 0
and rN_neg = rN_mask, rN_neg // biased, shifted n-1 for -x
}
;;
{ .mfi
ld8 rJ_neg = [rJ_neg] // Table value for -x
nop.f 0
shl rN_neg = rN_neg, 46 // 2^(n-1) bits in DP format for -x
}
;;
{ .mfi
or rN = rN, rJ // bits of 2^n * 2^(j/64) in DP format
nop.f 0
nop.i 0
}
;;
{ .mmf
setf.d fT = rN // 2^(n-1) * 2^(j/64)
or rN_neg = rN_neg, rJ_neg // -x bits of 2^n * 2^(j/64) in DP
fma.s1 fRSqr = fR, fR, f0 // R^2
}
;;
{ .mfi
setf.d fT_neg = rN_neg // 2^(n-1) * 2^(j/64) for -x
fma.s1 fP = fA3, fR, fA2 // A3*R + A2
nop.i 0
}
{ .mfi
nop.m 0
fnma.s1 fP_neg = fA3, fR, fA2 // A3*R + A2 for -x
nop.i 0
}
;;
{ .mfi
nop.m 0
fma.s1 fP = fP, fRSqr, fR // P = (A3*R + A2)*R^2 + R
nop.i 0
}
{ .mfi
nop.m 0
fms.s1 fP_neg = fP_neg, fRSqr, fR // P = (A3*R + A2)*R^2 + R, -x
nop.i 0
}
;;
{ .mfi
nop.m 0
fmpy.s0 fTmp = fLn2Div64, fLn2Div64 // Force inexact
nop.i 0
}
;;
{ .mfi
nop.m 0
fma.s1 fExp = fP, fT, fT // exp(x)/2
nop.i 0
}
{ .mfb
nop.m 0
fma.s1 fExp_neg = fP_neg, fT_neg, fT_neg // exp(-x)/2
// branch out if possible overflow result
(p13) br.cond.spnt SINH_POSSIBLE_OVERFLOW
}
;;
{ .mfb
nop.m 0
// final result in the absence of overflow
fms.s.s0 f8 = fExp, f1, fExp_neg // result = (exp(x)-exp(-x))/2
// exit here in the absence of overflow
br.ret.sptk b0 // Exit main path, 0.25 <= |x| < 89.41598
}
;;
// Here if 0 < |x| < 0.25. Evaluate 9th order polynomial.
SINH_SMALL:
{ .mfi
add rAd1 = 0x200, rTblAddr
fcmp.lt.s1 p7, p8 = fNormX, f0 // Test sign of x
cmp.gt p6, p0 = -60, rExp_x // Test |x| < 2^(-60)
}
{ .mfi
add rAd2 = 0x210, rTblAddr
nop.f 0
nop.i 0
}
;;
{ .mmb
ldfpd fA4, fA3 = [rAd1]
ldfpd fA2, fA1 = [rAd2]
(p6) br.cond.spnt SINH_VERY_SMALL // Branch if |x| < 2^(-60)
}
;;
{ .mfi
nop.m 0
fma.s1 fX3 = fXsq, fNormX, f0
nop.i 0
}
{ .mfi
nop.m 0
fma.s1 fX4 = fXsq, fXsq, f0
nop.i 0
}
;;
{ .mfi
nop.m 0
fma.s1 fA43 = fXsq, fA4, fA3
nop.i 0
}
{ .mfi
nop.m 0
fma.s1 fA21 = fXsq, fA2, fA1
nop.i 0
}
;;
{ .mfi
nop.m 0
fma.s1 fA4321 = fX4, fA43, fA21
nop.i 0
}
;;
// Dummy multiply to generate inexact
{ .mfi
nop.m 0
fmpy.s0 fTmp = fA4, fA4
nop.i 0
}
{ .mfb
nop.m 0
fma.s.s0 f8 = fA4321, fX3, fNormX
br.ret.sptk b0 // Exit if 2^-60 < |x| < 0.25
}
;;
SINH_VERY_SMALL:
// Here if 0 < |x| < 2^-60
// Compute result by x + sgn(x)*x^2 to get properly rounded result
.pred.rel "mutex",p7,p8
{ .mfi
nop.m 0
(p7) fnma.s.s0 f8 = fNormX, fNormX, fNormX // If x<0 result ~ x-x^2
nop.i 0
}
{ .mfb
nop.m 0
(p8) fma.s.s0 f8 = fNormX, fNormX, fNormX // If x>0 result ~ x+x^2
br.ret.sptk b0 // Exit if |x| < 2^-60
}
;;
SINH_POSSIBLE_OVERFLOW:
// Here if fMAX_SGL_NORM_ARG < x < fMIN_SGL_OFLOW_ARG
// This cannot happen if input is a single, only if input higher precision.
// Overflow is a possibility, not a certainty.
// Recompute result using status field 2 with user's rounding mode,
// and wre set. If result is larger than largest single, then we have
// overflow
{ .mfi
mov rGt_ln = 0x1007f // Exponent for largest single + 1 ulp
fsetc.s2 0x7F,0x42 // Get user's round mode, set wre
nop.i 0
}
;;
{ .mfi
setf.exp fGt_pln = rGt_ln // Create largest single + 1 ulp
fma.s.s2 fWre_urm_f8 = fP, fT, fT // Result with wre set
nop.i 0
}
;;
{ .mfi
nop.m 0
fsetc.s2 0x7F,0x40 // Turn off wre in sf2
nop.i 0
}
;;
{ .mfi
nop.m 0
fcmp.ge.s1 p6, p0 = fWre_urm_f8, fGt_pln // Test for overflow
nop.i 0
}
;;
{ .mfb
nop.m 0
nop.f 0
(p6) br.cond.spnt SINH_CERTAIN_OVERFLOW // Branch if overflow
}
;;
{ .mfb
nop.m 0
fma.s.s0 f8 = fP, fT, fT
br.ret.sptk b0 // Exit if really no overflow
}
;;
// here if overflow
SINH_CERTAIN_OVERFLOW:
{ .mfi
addl r17ones_m1 = 0x1FFFE, r0
fcmp.lt.s1 p6, p7 = fNormX, f0 // Test for x < 0
nop.i 0
}
;;
{ .mmf
alloc r32 = ar.pfs, 0, 3, 4, 0 // get some registers
setf.exp fTmp = r17ones_m1
fmerge.s FR_X = f8,f8
}
;;
{ .mfi
mov GR_Parameter_TAG = 128
(p6) fnma.s.s0 FR_RESULT = fTmp, fTmp, f0 // Set I,O and -INF result
nop.i 0
}
{ .mfb
nop.m 0
(p7) fma.s.s0 FR_RESULT = fTmp, fTmp, f0 // Set I,O and +INF result
br.cond.sptk __libm_error_region
}
;;
// Here if x unorm
SINH_UNORM:
{ .mfb
getf.exp rSignexp_x = fNormX // Must recompute if x unorm
fcmp.eq.s0 p6, p0 = f8, f0 // Set D flag
br.cond.sptk SINH_COMMON // Return to main path
}
;;
GLOBAL_IEEE754_END(sinhf)
libm_alias_float_other (__sinh, sinh)
LOCAL_LIBM_ENTRY(__libm_error_region)
.prologue
{ .mfi
add GR_Parameter_Y=-32,sp // Parameter 2 value
nop.f 0
.save ar.pfs,GR_SAVE_PFS
mov GR_SAVE_PFS=ar.pfs // Save ar.pfs
}
{ .mfi
.fframe 64
add sp=-64,sp // Create new stack
nop.f 0
mov GR_SAVE_GP=gp // Save gp
};;
{ .mmi
stfs [GR_Parameter_Y] = FR_Y,16 // Store Parameter 2 on stack
add GR_Parameter_X = 16,sp // Parameter 1 address
.save b0, GR_SAVE_B0
mov GR_SAVE_B0=b0 // Save b0
};;
.body
{ .mfi
stfs [GR_Parameter_X] = FR_X // Store Parameter 1 on stack
nop.f 0
add GR_Parameter_RESULT = 0,GR_Parameter_Y // Parameter 3 address
}
{ .mib
stfs [GR_Parameter_Y] = FR_RESULT // Store Parameter 3 on stack
add GR_Parameter_Y = -16,GR_Parameter_Y
br.call.sptk b0=__libm_error_support# // Call error handling function
};;
{ .mmi
add GR_Parameter_RESULT = 48,sp
nop.m 0
nop.i 0
};;
{ .mmi
ldfs f8 = [GR_Parameter_RESULT] // Get return result off stack
.restore sp
add sp = 64,sp // Restore stack pointer
mov b0 = GR_SAVE_B0 // Restore return address
};;
{ .mib
mov gp = GR_SAVE_GP // Restore gp
mov ar.pfs = GR_SAVE_PFS // Restore ar.pfs
br.ret.sptk b0 // Return
};;
LOCAL_LIBM_END(__libm_error_region)
.type __libm_error_support#,@function
.global __libm_error_support#