glibc/sysdeps/unix/sysv/linux/configure.in
Ulrich Drepper 003a02c6ae Update.
* sysdeps/unix/sysv/linux/configure.in: Allow architecture
	specific minimal supported kernel versions to be specified.
2000-06-13 03:49:12 +00:00

180 lines
5.8 KiB
Plaintext

sinclude(./aclocal.m4)dnl Autoconf lossage
GLIBC_PROVIDES dnl See aclocal.m4 in the top level source directory.
# Local configure fragment for sysdeps/unix/sysv/linux.
# On Linux, the default is to use libio instead of stdio.
test $stdio = default && stdio=libio
# Don't bother trying to generate any glue code to be compatible with the
# existing system library, because we are the only system library.
inhibit_glue=yes
define([LIBC_LINUX_VERSION],[2.0.10])dnl
if test -n "$sysheaders"; then
OLD_CPPFLAGS=$CPPFLAGS
CPPFLAGS="$CPPFLAGS $SYSINCLUDES"
fi
define([libc_cv_linuxVER], [libc_cv_linux]patsubst(LIBC_LINUX_VERSION,[\.]))dnl
AC_CACHE_CHECK(installed Linux kernel header files, libc_cv_linuxVER, [dnl
AC_EGREP_CPP([eat flaming death], [#include <linux/version.h>
#if !defined LINUX_VERSION_CODE || LINUX_VERSION_CODE < ]dnl
patsubst(LIBC_LINUX_VERSION,[^\([^.]*\)\.\([^.]*\)\.\([^.]*\)$],dnl
[ (\1 *65536+ \2 *256+ \3) /* \1.\2.\3 */])[
eat flaming death
#endif],
libc_cv_linuxVER='TOO OLD!',
libc_cv_linuxVER='LIBC_LINUX_VERSION or later')])
if test "$libc_cv_linuxVER" != 'LIBC_LINUX_VERSION or later'; then
AC_MSG_ERROR([GNU libc requires kernel header files from
Linux LIBC_LINUX_VERSION or later to be installed before configuring.
The kernel header files are found usually in /usr/include/asm and
/usr/include/linux; make sure these directories use files from
Linux LIBC_LINUX_VERSION or later. This check uses <linux/version.h>, so
make sure that file was built correctly when installing the kernel header
files. To use kernel headers not from /usr/include/linux, use the
configure option --with-headers.])
fi
# If the user gave a minimal version number test whether the available
# kernel headers are young enough. Additionally we have minimal
# kernel versions for some architectures.
if test -n "$minimum_kernel"; then
case "$machine" in
sh*)
arch_minimum_kernel=2.3.99
;;
*)
;;
esac
user_version=$((`echo $minimum_kernel.0.0.0 | sed 's/\([0-9]*\)\.\([0-9]*\)\.\([0-9]*\).*/\1 \* 65536 + \2 \* 256 + \3/'`))
arch_version=$((`echo $arch_minimum_kernel.0.0.0 | sed 's/\([0-9]*\)\.\([0-9]*\)\.\([0-9]*\).*/\1 \* 65536 + \2 \* 256 + \3/'`))
if test $user_version -lt $arch_minimum_kernel; then
AC_MSG_WARN([minimum kernel version reset to $arch_minimum_kernel])
minimum_kernel=$arch_minimum_kernel
fi
else
case "$machine" in
sh*)
minimum_kernel = 2.3.99
;;
*)
;;
esac
fi
if test -n "$minimum_kernel"; then
AC_MSG_CHECKING(for kernel header at least $minimum_kernel)
changequote(,)dnl
decnum=`echo "$minimum_kernel.0.0.0" | sed 's/\([0-9]*\)\.\([0-9]*\)\.\([0-9]*\).*/(\1 * 65536 + \2 * 256 + \3)/'`;
changequote([,])dnl
AC_EGREP_CPP([eat flaming death], [#include <linux/version.h>
#if LINUX_VERSION_CODE < $decnum
eat flaming death
#endif], libc_minimum_kernel='too old!', libc_minimum_kernel=ok)
AC_MSG_RESULT($libc_minimum_kernel)
if test "$libc_minimum_kernel" = ok; then
AC_DEFINE_UNQUOTED(__LINUX_KERNEL_VERSION, $decnum)
else
AC_MSG_ERROR([*** The available kernel headers are older than the requested
*** compatible kernel version])
fi
fi
if test -n "$sysheaders"; then
CPPFLAGS=$OLD_CPPFLAGS
fi
# The Linux filesystem standard prescribes where to place "essential"
# files. I.e., when the installation prefix is "/usr" we have to place
# shared library objects and the configuration files on the root partition
# in /lib and /etc.
if test "$prefix" = "/usr" -o "$prefix" = "/usr/"; then
# 64bit libraries on sparc go to /lib64 and not /lib
if test "$machine" = "sparc/sparc64"; then
libc_cv_slibdir="/lib64"
if test "$libdir" = '${exec_prefix}/lib'; then
libdir='${exec_prefix}/lib64';
# Locale data can be shared between 32bit and 64bit libraries
libc_cv_localedir='${exec_prefix}/lib/locale'
fi
else
libc_cv_slibdir="/lib"
fi
libc_cv_sysconfdir="/etc"
libc_cv_rootsbindir="/sbin"
fi
# Under Linux the LinuxThreads add-on should be available.
case $add_ons in
# It is available. Good.
*linuxthreads*)
message=
;;
*)
message="\
*** WARNING: Are you sure you do not want to use the \`linuxthreads'
*** add-on?"
;;
esac
if test "$message"; then
if test $enable_sanity = yes; then
echo "\
*** You should not compile the GNU libc without the \`linuxthreads'
*** add-on. Not using them risks being incompatible with the
*** libraries of other systems. Consider getting the add-on and restarting
*** the configuration.
*** If you really mean to not use this add-on, run configure again
*** using the extra parameter \`--disable-sanity-checks'."
exit 1
else
echo "$message"
fi
fi
# One Linux we use ldconfig.
use_ldconfig=yes
# We need some extensions to the `ldd' script.
changequote(,)
case "$machine" in
i[3456]86* | m68*)
ldd_rewrite_script=../sysdeps/unix/sysv/linux/ldd-rewrite.sed
;;
sparc*)
ldd_rewrite_script=../sysdeps/unix/sysv/linux/sparc/ldd-rewrite.sed
;;
*)
;;
esac
changequote([,])
if test $host = $build; then
# If $prefix/include/{net,scsi} are symlinks, make install will
# clobber what they're linked to (probably a kernel tree).
# test -L ought to work on all Linux boxes.
if test "x$prefix" != xNONE; then
ac_prefix=$prefix
else
ac_prefix=$ac_default_prefix
fi
AC_MSG_CHECKING([for symlinks in ${ac_prefix}/include])
ac_message=
if test -L ${ac_prefix}/include/net; then
ac_message="$ac_message
${ac_prefix}/include/net is a symlink"
fi
if test -L ${ac_prefix}/include/scsi; then
ac_message="$ac_message
${ac_prefix}/include/scsi is a symlink"
fi
if test -n "$ac_message"; then
AC_MSG_ERROR([$ac_message
\`make install' will destroy the target of the link(s).
Delete the links and re-run configure, or better still, move the entire
${ac_prefix}/include directory out of the way.])
else
AC_MSG_RESULT(ok)
fi
fi