glibc/INSTALL

833 lines
37 KiB
Plaintext

Library Maintenance
*******************
How to Install the GNU C Library
================================
Installation of the GNU C library is relatively simple.
You need the latest version of GNU `make'. Modifying the GNU C
Library to work with other `make' programs would be so hard that we
recommend you port GNU `make' instead. *Really.*
To configure the GNU C library for your system, run the shell script
`configure' with `sh'. Use an argument which is the conventional GNU
name for your system configuration--for example, `sparc-sun-sunos4.1',
for a Sun 4 running Sunos 4.1. *Note Installation:
(gcc.info)Installation, for a full description of standard GNU
configuration names. If you omit the configuration name, `configure'
will try to guess one for you by inspecting the system it is running
on. It may or may not be able to come up with a guess, and the its
guess might be wrong. `configure' will tell you the canonical name of
the chosen configuration before proceeding.
The GNU C Library currently supports configurations that match the
following patterns:
alpha-dec-osf1
i386-ANYTHING-bsd4.3
i386-ANYTHING-gnu
i386-ANYTHING-isc2.2
i386-ANYTHING-isc3.N
i386-ANYTHING-sco3.2
i386-ANYTHING-sco3.2v4
i386-ANYTHING-sysv
i386-ANYTHING-sysv4
i386-force_cpu386-none
i386-sequent-bsd
i960-nindy960-none
m68k-hp-bsd4.3
m68k-mvme135-none
m68k-mvme136-none
m68k-sony-newsos3
m68k-sony-newsos4
m68k-sun-sunos4.N
mips-dec-ultrix4.N
mips-sgi-irix4.N
sparc-sun-solaris2.N
sparc-sun-sunos4.N
While no other configurations are supported, there are handy aliases
for these few. (These aliases work in other GNU software as well.)
decstation
hp320-bsd4.3 hp300bsd
i386-sco
i386-sco3.2v4
i386-sequent-dynix
i386-svr4
news
sun3-sunos4.N sun3
sun4-solaris2.N sun4-sunos5.N
sun4-sunos4.N sun4
Here are some options that you should specify (if appropriate) when
you run `configure':
`--with-gnu-ld'
Use this option if you plan to use GNU `ld' to link programs with
the GNU C Library. (We strongly recommend that you do.) This
option enables use of features that exist only in GNU `ld'; so if
you configure for GNU `ld' you must use GNU `ld' *every time* you
link with the GNU C Library, and when building it.
`--with-gnu-as'
Use this option if you plan to use the GNU assembler, `gas', when
building the GNU C Library. On some systems, the library may not
build properly if you do *not* use `gas'.
`--nfp'
Use this option if your computer lacks hardware floating point
support.
`--prefix=DIRECTORY'
Install machine-independent data files in subdirectories of
`DIRECTORY'. (You can also set this in `configparms'; see below.)
`--exec-prefix=DIRECTORY'
Install the library and other machine-dependent files in
subdirectories of `DIRECTORY'. (You can also set this in
`configparms'; see below.)
The simplest way to run `configure' is to do it in the directory
that contains the library sources. This prepares to build the library
in that very directory.
You can prepare to build the library in some other directory by going
to that other directory to run `configure'. In order to run configure,
you will have to specify a directory for it, like this:
mkdir sun4
cd sun4
../configure sparc-sun-sunos4.1
`configure' looks for the sources in whatever directory you specified
for finding `configure' itself. It does not matter where in the file
system the source and build directories are--as long as you specify the
source directory when you run `configure', you will get the proper
results.
This feature lets you keep sources and binaries in different
directories, and that makes it easy to build the library for several
different machines from the same set of sources. Simply create a build
directory for each target machine, and run `configure' in that
directory specifying the target machine's configuration name.
The library has a number of special-purpose configuration parameters.
These are defined in the file `Makeconfig'; see the comments in that
file for the details.
But don't edit the file `Makeconfig' yourself--instead, create a
file `configparms' in the directory where you are building the library,
and define in that file the parameters you want to specify.
`configparms' should *not* be an edited copy of `Makeconfig'; specify
only the parameters that you want to override. To see how to set these
parameters, find the section of `Makeconfig' that says "These are the
configuration variables." Then for each parameter that you want to
change, copy the definition from `Makeconfig' to your new `configparms'
file, and change the value as appropriate for your system.
It is easy to configure the GNU C library for cross-compilation by
setting a few variables in `configparms'. Set `CC' to the
cross-compiler for the target you configured the library for; it is
important to use this same `CC' value when running `configure', like
this: `CC=TARGET-gcc configure TARGET'. Set `BUILD_CC' to the compiler
to use for for programs run on the build system as part of compiling
the library. You may need to set `AR' and `RANLIB' to cross-compiling
versions of `ar' and `ranlib' if the native tools are not configured to
work with object files for the target you configured for.
Some of the machine-dependent code for some machines uses extensions
in the GNU C compiler, so you may need to compile the library with GCC.
(In fact, all of the existing complete ports require GCC.)
The current release of the C library contains some header files that
the compiler normally provides: `stddef.h', `stdarg.h', and several
files with names of the form `va-MACHINE.h'. The versions of these
files that came with older releases of GCC do not work properly with
the GNU C library. The `stddef.h' file in release 2.2 and later of GCC
is correct. If you have release 2.2 or later of GCC, use its version
of `stddef.h' instead of the C library's. To do this, put the line
`override stddef.h =' in `configparms'. The other files are corrected
in release 2.3 and later of GCC. `configure' will automatically detect
whether the installed `stdarg.h' and `va-MACHINE.h' files are
compatible with the C library, and use its own if not.
There is a potential problem with the `size_t' type and versions of
GCC prior to release 2.4. ANSI C requires that `size_t' always be an
unsigned type. For compatibility with existing systems' header files,
GCC defines `size_t' in `stddef.h' to be whatever type the system's
`sys/types.h' defines it to be. Most Unix systems that define `size_t'
in `sys/types.h', define it to be a signed type. Some code in the
library depends on `size_t' being an unsigned type, and will not work
correctly if it is signed.
The GNU C library code which expects `size_t' to be unsigned is
correct. The definition of `size_t' as a signed type is incorrect.
Versions 2.4 and later of GCC always define `size_t' as an unsigned
type, and GCC's `fixincludes' script massages the system's
`sys/types.h' so as not to conflict with this.
In the meantime, we work around this problem by telling GCC
explicitly to use an unsigned type for `size_t' when compiling the GNU C
library. `configure' will automatically detect what type GCC uses for
`size_t' arrange to override it if necessary.
To build the library, type `make lib'. This will produce a lot of
output, some of which looks like errors from `make' (but isn't). Look
for error messages from `make' containing `***'. Those indicate that
something is really wrong.
To build and run some test programs which exercise some of the
library facilities, type `make tests'. This will produce several files
with names like `PROGRAM.out'.
To format the `GNU C Library Reference Manual' for printing, type
`make dvi'. To format the Info version of the manual for on line
reading with `C-h i' in Emacs or with the `info' program, type
`make info'.
To install the library and its header files, and the Info files of
the manual, type `make install', after setting the installation
directories in `configparms'. This will build things if necessary,
before installing them.
Reporting Bugs
==============
There are probably bugs in the GNU C library. There are certainly
errors and omissions in this manual. If you report them, they will get
fixed. If you don't, no one will ever know about them and they will
remain unfixed for all eternity, if not longer.
To report a bug, first you must find it. Hopefully, this will be the
hard part. Once you've found a bug, make sure it's really a bug. A
good way to do this is to see if the GNU C library behaves the same way
some other C library does. If so, probably you are wrong and the
libraries are right (but not necessarily). If not, one of the libraries
is probably wrong.
Once you're sure you've found a bug, try to narrow it down to the
smallest test case that reproduces the problem. In the case of a C
library, you really only need to narrow it down to one library function
call, if possible. This should not be too difficult.
The final step when you have a simple test case is to report the bug.
When reporting a bug, send your test case, the results you got, the
results you expected, what you think the problem might be (if you've
thought of anything), your system type, and the version of the GNU C
library which you are using. Also include the files `config.status'
and `config.make' which are created by running `configure'; they will
be in whatever directory was current when you ran `configure'.
If you think you have found some way in which the GNU C library does
not conform to the ANSI and POSIX standards (*note Standards and
Portability::.), that is definitely a bug. Report it!
Send bug reports to the Internet address `bug-glibc@prep.ai.mit.edu'
or the UUCP path `mit-eddie!prep.ai.mit.edu!bug-glibc'. If you have
other problems with installation or use, please report those as well.
If you are not sure how a function should behave, and this manual
doesn't tell you, that's a bug in the manual. Report that too! If the
function's behavior disagrees with the manual, then either the library
or the manual has a bug, so report the disagreement. If you find any
errors or omissions in this manual, please report them to the Internet
address `bug-glibc-manual@prep.ai.mit.edu' or the UUCP path
`mit-eddie!prep.ai.mit.edu!bug-glibc-manual'.
Adding New Functions
====================
The process of building the library is driven by the makefiles, which
make heavy use of special features of GNU `make'. The makefiles are
very complex, and you probably don't want to try to understand them.
But what they do is fairly straightforward, and only requires that you
define a few variables in the right places.
The library sources are divided into subdirectories, grouped by
topic. The `string' subdirectory has all the string-manipulation
functions, `stdio' has all the standard I/O functions, etc.
Each subdirectory contains a simple makefile, called `Makefile',
which defines a few `make' variables and then includes the global
makefile `Rules' with a line like:
include ../Rules
The basic variables that a subdirectory makefile defines are:
`subdir'
The name of the subdirectory, for example `stdio'. This variable
*must* be defined.
`headers'
The names of the header files in this section of the library, such
as `stdio.h'.
`routines'
`aux'
The names of the modules (source files) in this section of the
library. These should be simple names, such as `strlen' (rather
than complete file names, such as `strlen.c'). Use `routines' for
modules that define functions in the library, and `aux' for
auxiliary modules containing things like data definitions. But the
values of `routines' and `aux' are just concatenated, so there
really is no practical difference.
`tests'
The names of test programs for this section of the library. These
should be simple names, such as `tester' (rather than complete file
names, such as `tester.c'). `make tests' will build and run all
the test programs. If a test program needs input, put the test
data in a file called `TEST-PROGRAM.input'; it will be given to
the test program on its standard input. If a test program wants
to be run with arguments, put the arguments (all on a single line)
in a file called `TEST-PROGRAM.args'.
`others'
The names of "other" programs associated with this section of the
library. These are programs which are not tests per se, but are
other small programs included with the library. They are built by
`make others'.
`install-lib'
`install-data'
`install'
Files to be installed by `make install'. Files listed in
`install-lib' are installed in the directory specified by `libdir'
in `configparms' or `Makeconfig' (*note Installation::.). Files
listed in `install-data' are installed in the directory specified
by `datadir' in `configparms' or `Makeconfig'. Files listed in
`install' are installed in the directory specified by `bindir' in
`configparms' or `Makeconfig'.
`distribute'
Other files from this subdirectory which should be put into a
distribution tar file. You need not list here the makefile itself
or the source and header files listed in the other standard
variables. Only define `distribute' if there are files used in an
unusual way that should go into the distribution.
`generated'
Files which are generated by `Makefile' in this subdirectory.
These files will be removed by `make clean', and they will never
go into a distribution.
`extra-objs'
Extra object files which are built by `Makefile' in this
subdirectory. This should be a list of file names like `foo.o';
the files will actually be found in whatever directory object
files are being built in. These files will be removed by
`make clean'. This variable is used for secondary object files
needed to build `others' or `tests'.
Porting the GNU C Library
=========================
The GNU C library is written to be easily portable to a variety of
machines and operating systems. Machine- and operating system-dependent
functions are well separated to make it easy to add implementations for
new machines or operating systems. This section describes the layout of
the library source tree and explains the mechanisms used to select
machine-dependent code to use.
All the machine-dependent and operating system-dependent files in the
library are in the subdirectory `sysdeps' under the top-level library
source directory. This directory contains a hierarchy of
subdirectories (*note Hierarchy Conventions::.).
Each subdirectory of `sysdeps' contains source files for a
particular machine or operating system, or for a class of machine or
operating system (for example, systems by a particular vendor, or all
machines that use IEEE 754 floating-point format). A configuration
specifies an ordered list of these subdirectories. Each subdirectory
implicitly appends its parent directory to the list. For example,
specifying the list `unix/bsd/vax' is equivalent to specifying the list
`unix/bsd/vax unix/bsd unix'. A subdirectory can also specify that it
implies other subdirectories which are not directly above it in the
directory hierarchy. If the file `Implies' exists in a subdirectory,
it lists other subdirectories of `sysdeps' which are appended to the
list, appearing after the subdirectory containing the `Implies' file.
Lines in an `Implies' file that begin with a `#' character are ignored
as comments. For example, `unix/bsd/Implies' contains:
# BSD has Internet-related things.
unix/inet
and `unix/Implies' contains:
posix
So the final list is `unix/bsd/vax unix/bsd unix/inet unix posix'.
`sysdeps' has two "special" subdirectories, called `generic' and
`stub'. These two are always implicitly appended to the list of
subdirectories (in that order), so you needn't put them in an `Implies'
file, and you should not create any subdirectories under them.
`generic' is for things that can be implemented in machine-independent
C, using only other machine-independent functions in the C library.
`stub' is for "stub" versions of functions which cannot be implemented
on a particular machine or operating system. The stub functions always
return an error, and set `errno' to `ENOSYS' (Function not
implemented). *Note Error Reporting::.
A source file is known to be system-dependent by its having a
version in `generic' or `stub'; every system-dependent function should
have either a generic or stub implementation (there is no point in
having both).
If you come across a file that is in one of the main source
directories (`string', `stdio', etc.), and you want to write a machine-
or operating system-dependent version of it, move the file into
`sysdeps/generic' and write your new implementation in the appropriate
system-specific subdirectory. Note that if a file is to be
system-dependent, it *must not* appear in one of the main source
directories.
There are a few special files that may exist in each subdirectory of
`sysdeps':
`Makefile'
A makefile for this machine or operating system, or class of
machine or operating system. This file is included by the library
makefile `Makerules', which is used by the top-level makefile and
the subdirectory makefiles. It can change the variables set in the
including makefile or add new rules. It can use GNU `make'
conditional directives based on the variable `subdir' (see above)
to select different sets of variables and rules for different
sections of the library. It can also set the `make' variable
`sysdep-routines', to specify extra modules to be included in the
library. You should use `sysdep-routines' rather than adding
modules to `routines' because the latter is used in determining
what to distribute for each subdirectory of the main source tree.
Each makefile in a subdirectory in the ordered list of
subdirectories to be searched is included in order. Since several
system-dependent makefiles may be included, each should append to
`sysdep-routines' rather than simply setting it:
sysdep-routines := $(sysdep-routines) foo bar
`Subdirs'
This file contains the names of new whole subdirectories under the
top-level library source tree that should be included for this
system. These subdirectories are treated just like the
system-independent subdirectories in the library source tree, such
as `stdio' and `math'.
Use this when there are completely new sets of functions and header
files that should go into the library for the system this
subdirectory of `sysdeps' implements. For example,
`sysdeps/unix/inet/Subdirs' contains `inet'; the `inet' directory
contains various network-oriented operations which only make sense
to put in the library on systems that support the Internet.
`Dist'
This file contains the names of files (relative to the
subdirectory of `sysdeps' in which it appears) which should be
included in the distribution. List any new files used by rules in
the `Makefile' in the same directory, or header files used by the
source files in that directory. You don't need to list files that
are implementations (either C or assembly source) of routines
whose names are given in the machine-independent makefiles in the
main source tree.
`configure'
This file is a shell script fragment to be run at configuration
time. The top-level `configure' script uses the shell `.' command
to read the `configure' file in each system-dependent directory
chosen, in order. The `configure' files are often generated from
`configure.in' files using Autoconf.
A system-dependent `configure' script will usually add things to
the shell variables `DEFS' and `config_vars'; see the top-level
`configure' script for details. The script can check for
`--with-PACKAGE' options that were passed to the top-level
`configure'. For an option `--with-PACKAGE=VALUE' `configure'
sets the shell variable `with_PACKAGE' (with any dashes in PACKAGE
converted to underscores) to VALUE; if the option is just
`--with-PACKAGE' (no argument), then it sets `with_PACKAGE' to
`yes'.
`configure.in'
This file is an Autoconf input fragment to be processed into the
file `configure' in this subdirectory. *Note Introduction:
(autoconf.info)Introduction, for a description of Autoconf. You
should write either `configure' or `configure.in', but not both.
The first line of `configure.in' should invoke the `m4' macro
`GLIBC_PROVIDES'. This macro does several `AC_PROVIDE' calls for
Autoconf macros which are used by the top-level `configure'
script; without this, those macros might be invoked again
unnecessarily by Autoconf.
That is the general system for how system-dependencies are isolated.
Layout of the `sysdeps' Directory Hierarchy
-------------------------------------------
A GNU configuration name has three parts: the CPU type, the
manufacturer's name, and the operating system. `configure' uses these
to pick the list of system-dependent directories to look for. If the
`--nfp' option is *not* passed to `configure', the directory
`MACHINE/fpu' is also used. The operating system often has a "base
operating system"; for example, if the operating system is `sunos4.1',
the base operating system is `unix/bsd'. The algorithm used to pick
the list of directories is simple: `configure' makes a list of the base
operating system, manufacturer, CPU type, and operating system, in that
order. It then concatenates all these together with slashes in
between, to produce a directory name; for example, the configuration
`sparc-sun-sunos4.1' results in `unix/bsd/sun/sparc/sunos4.1'.
`configure' then tries removing each element of the list in turn, so
`unix/bsd/sparc' and `sun/sparc' are also tried, among others. Since
the precise version number of the operating system is often not
important, and it would be very inconvenient, for example, to have
identical `sunos4.1.1' and `sunos4.1.2' directories, `configure' tries
successively less specific operating system names by removing trailing
suffixes starting with a period.
As an example, here is the complete list of directories that would be
tried for the configuration `sparc-sun-sunos4.1' (without the `--nfp'
option):
sparc/fpu
unix/bsd/sun/sunos4.1/sparc
unix/bsd/sun/sunos4.1
unix/bsd/sun/sunos4/sparc
unix/bsd/sun/sunos4
unix/bsd/sun/sunos/sparc
unix/bsd/sun/sunos
unix/bsd/sun/sparc
unix/bsd/sun
unix/bsd/sunos4.1/sparc
unix/bsd/sunos4.1
unix/bsd/sunos4/sparc
unix/bsd/sunos4
unix/bsd/sunos/sparc
unix/bsd/sunos
unix/bsd/sparc
unix/bsd
unix/sun/sunos4.1/sparc
unix/sun/sunos4.1
unix/sun/sunos4/sparc
unix/sun/sunos4
unix/sun/sunos/sparc
unix/sun/sunos
unix/sun/sparc
unix/sun
unix/sunos4.1/sparc
unix/sunos4.1
unix/sunos4/sparc
unix/sunos4
unix/sunos/sparc
unix/sunos
unix/sparc
unix
sun/sunos4.1/sparc
sun/sunos4.1
sun/sunos4/sparc
sun/sunos4
sun/sunos/sparc
sun/sunos
sun/sparc
sun
sunos4.1/sparc
sunos4.1
sunos4/sparc
sunos4
sunos/sparc
sunos
sparc
Different machine architectures are conventionally subdirectories at
the top level of the `sysdeps' directory tree. For example,
`sysdeps/sparc' and `sysdeps/m68k'. These contain files specific to
those machine architectures, but not specific to any particular
operating system. There might be subdirectories for specializations of
those architectures, such as `sysdeps/m68k/68020'. Code which is
specific to the floating-point coprocessor used with a particular
machine should go in `sysdeps/MACHINE/fpu'.
There are a few directories at the top level of the `sysdeps'
hierarchy that are not for particular machine architectures.
`generic'
`stub'
As described above (*note Porting::.), these are the two
subdirectories that every configuration implicitly uses after all
others.
`ieee754'
This directory is for code using the IEEE 754 floating-point
format, where the C type `float' is IEEE 754 single-precision
format, and `double' is IEEE 754 double-precision format. Usually
this directory is referred to in the `Implies' file in a machine
architecture-specific directory, such as `m68k/Implies'.
`posix'
This directory contains implementations of things in the library in
terms of POSIX.1 functions. This includes some of the POSIX.1
functions themselves. Of course, POSIX.1 cannot be completely
implemented in terms of itself, so a configuration using just
`posix' cannot be complete.
`unix'
This is the directory for Unix-like things. *Note Porting to
Unix::. `unix' implies `posix'. There are some special-purpose
subdirectories of `unix':
`unix/common'
This directory is for things common to both BSD and System V
release 4. Both `unix/bsd' and `unix/sysv/sysv4' imply
`unix/common'.
`unix/inet'
This directory is for `socket' and related functions on Unix
systems. The `inet' top-level subdirectory is enabled by
`unix/inet/Subdirs'. `unix/common' implies `unix/inet'.
`mach'
This is the directory for things based on the Mach microkernel
from CMU (including the GNU operating system). Other basic
operating systems (VMS, for example) would have their own
directories at the top level of the `sysdeps' hierarchy, parallel
to `unix' and `mach'.
Porting the GNU C Library to Unix Systems
-----------------------------------------
Most Unix systems are fundamentally very similar. There are
variations between different machines, and variations in what
facilities are provided by the kernel. But the interface to the
operating system facilities is, for the most part, pretty uniform and
simple.
The code for Unix systems is in the directory `unix', at the top
level of the `sysdeps' hierarchy. This directory contains
subdirectories (and subdirectory trees) for various Unix variants.
The functions which are system calls in most Unix systems are
implemented in assembly code in files in `sysdeps/unix'. These files
are named with a suffix of `.S'; for example, `__open.S'. Files ending
in `.S' are run through the C preprocessor before being fed to the
assembler.
These files all use a set of macros that should be defined in
`sysdep.h'. The `sysdep.h' file in `sysdeps/unix' partially defines
them; a `sysdep.h' file in another directory must finish defining them
for the particular machine and operating system variant. See
`sysdeps/unix/sysdep.h' and the machine-specific `sysdep.h'
implementations to see what these macros are and what they should do.
The system-specific makefile for the `unix' directory (that is, the
file `sysdeps/unix/Makefile') gives rules to generate several files
from the Unix system you are building the library on (which is assumed
to be the target system you are building the library *for*). All the
generated files are put in the directory where the object files are
kept; they should not affect the source tree itself. The files
generated are `ioctls.h', `errnos.h', `sys/param.h', and `errlist.c'
(for the `stdio' section of the library).
Contributors to the GNU C Library
=================================
The GNU C library was written almost entirely by Roland McGrath, who
now maintains it. Some parts of the library were contributed or worked
on by other people.
* The `getopt' function and related code were written by Richard
Stallman, David J. MacKenzie, and Roland McGrath.
* Most of the math functions are taken from 4.4 BSD; they have been
modified only slightly to work with the GNU C library. The
Internet-related code (most of the `inet' subdirectory) and several
other miscellaneous functions and header files have been included
with little or no modification.
All code incorporated from 4.4 BSD is under the following
copyright:
Copyright (C) 1991 Regents of the University of California.
All rights reserved.
Redistribution and use in source and binary forms, with or
without modification, are permitted provided that the
following conditions are met:
1. Redistributions of source code must retain the above
copyright notice, this list of conditions and the
following disclaimer.
2. Redistributions in binary form must reproduce the above
copyright notice, this list of conditions and the
following disclaimer in the documentation and/or other
materials provided with the distribution.
3. All advertising materials mentioning features or use of
this software must display the following acknowledgement:
This product includes software developed by the
University of California, Berkeley and its
contributors.
4. Neither the name of the University nor the names of its
contributors may be used to endorse or promote products
derived from this software without specific prior
written permission.
THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS "AS
IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
OF SUCH DAMAGE.
* The random number generation functions `random', `srandom',
`setstate' and `initstate', which are also the basis for the
`rand' and `srand' functions, were written by Earl T. Cohen for
the University of California at Berkeley and are copyrighted by the
Regents of the University of California. They have undergone minor
changes to fit into the GNU C library and to fit the ANSI C
standard, but the functional code is Berkeley's.
* The merge sort function `qsort' was written by Michael J. Haertel.
* The quick sort function used as a fallback by `qsort' was written
by Douglas C. Schmidt.
* The memory allocation functions `malloc', `realloc' and `free' and
related code were written by Michael J. Haertel.
* Fast implementations of many of the string functions (`memcpy',
`strlen', etc.) were written by Torbjorn Granlund.
* Some of the support code for Mach is taken from Mach 3.0 by CMU,
and is under the following copyright terms:
Mach Operating System
Copyright (C) 1991,1990,1989 Carnegie Mellon University
All Rights Reserved.
Permission to use, copy, modify and distribute this software
and its documentation is hereby granted, provided that both
the copyright notice and this permission notice appear in all
copies of the software, derivative works or modified
versions, and any portions thereof, and that both notices
appear in supporting documentation.
CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN ITS "AS
IS" CONDITION. CARNEGIE MELLON DISCLAIMS ANY LIABILITY OF
ANY KIND FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF
THIS SOFTWARE.
Carnegie Mellon requests users of this software to return to
Software Distribution Coordinator
School of Computer Science
Carnegie Mellon University
Pittsburgh PA 15213-3890
or `Software.Distribution@CS.CMU.EDU' any improvements or
extensions that they make and grant Carnegie Mellon the
rights to redistribute these changes.
* The `tar.h' header file was written by David J. MacKenzie.
* The port to the MIPS DECStation running Ultrix 4
(`mips-dec-ultrix4') was contributed by Brendan Kehoe and Ian
Lance Taylor.
* The DES encryption function `crypt' and related functions were
contributed by Michael Glad.
* The `ftw' function was contributed by Ian Lance Taylor.
* The code to support SunOS shared libraries was contributed by Tom
Quinn.
* The `mktime' function was contributed by Noel Cragg.
* The port to the Sequent Symmetry running Dynix version 3
(`i386-sequent-bsd') was contributed by Jason Merrill.
* The timezone support code is derived from the public-domain
timezone package by Arthur David Olson.
* The Internet resolver code is taken directly from BIND 4.9.1,
which is under both the Berkeley copyright above and also:
Portions Copyright (C) 1993 by Digital Equipment Corporation.
Permission to use, copy, modify, and distribute this software
for any purpose with or without fee is hereby granted,
provided that the above copyright notice and this permission
notice appear in all copies, and that the name of Digital
Equipment Corporation not be used in advertising or publicity
pertaining to distribution of the document or software
without specific, written prior permission.
THE SOFTWARE IS PROVIDED "AS IS" AND DIGITAL EQUIPMENT CORP.
DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS. IN NO EVENT SHALL DIGITAL EQUIPMENT CORPORATION BE
LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION
WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
* The port to the DEC Alpha running OSF/1 (`alpha-dec-osf1') was
contributed by Brendan Kehoe, using some code written by Roland
McGrath.
* The floating-point printing function used by `printf' and friends
was written by Roland McGrath and Torbjorn Granlund. The
multi-precision integer functions used in that function are taken
from GNU MP, which was contributed by Torbjorn Granlund.
* The code to support Sun RPC is taken verbatim from Sun's
RPCSRC-4.0 distribution, and is covered by this copyright:
Copyright (C) 1984, Sun Microsystems, Inc.
Sun RPC is a product of Sun Microsystems, Inc. and is
provided for unrestricted use provided that this legend is
included on all tape media and as a part of the software
program in whole or part. Users may copy or modify Sun RPC
without charge, but are not authorized to license or
distribute it to anyone else except as part of a product or
program developed by the user.
SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND
INCLUDING THE WARRANTIES OF DESIGN, MERCHANTIBILITY AND
FITNESS FOR A PARTICULAR PURPOSE, OR ARISING FROM A COURSE OF
DEALING, USAGE OR TRADE PRACTICE.
Sun RPC is provided with no support and without any
obligation on the part of Sun Microsystems, Inc. to assist in
its use, correction, modification or enhancement.
SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT
TO THE INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY
PATENTS BY SUN RPC OR ANY PART THEREOF.
In no event will Sun Microsystems, Inc. be liable for any
lost revenue or profits or other special, indirect and
consequential damages, even if Sun has been advised of the
possibility of such damages.
Sun Microsystems, Inc.
2550 Garcia Avenue
Mountain View, California 94043
* The port to SGI machines running Irix 4 (`mips-sgi-irix4') was
contributed by Tom Quinn.
* The port of the Mach and Hurd code to the MIPS architecture
(`mips-ANYTHING-gnu') was contribued by Kazumoto Kojima.