858045ad1c
ISO C2X has made some changes to the handling of feature test macros related to features from the floating-point TSes, and to exactly what such features are present in what headers, that require corresponding changes in glibc. * For the few features that were controlled by __STDC_WANT_IEC_60559_BFP_EXT__ (and the corresponding DFP macro) in C2X, there is now instead a new feature test macro __STDC_WANT_IEC_60559_EXT__ covering both binary and decimal FP. This controls CR_DECIMAL_DIG in <float.h> (provided by GCC; I implemented support for the new feature test macro for GCC 11) and the totalorder and payload functions in <math.h>. C2X no longer says anything about __STDC_WANT_IEC_60559_BFP_EXT__ (so it's appropriate for that macro to continue to enable exactly the features from TS 18661-1). * The SNAN macros for each floating-point type have moved to <float.h> (and been renamed in the process). Thus, the copies in <math.h> should only be defined for __STDC_WANT_IEC_60559_BFP_EXT__, not for C2X. * The fmaxmag and fminmag functions have been removed (replaced by new functions for the new min/max operations in IEEE 754-2019). Thus those should also only be declared for __STDC_WANT_IEC_60559_BFP_EXT__. * The _FloatN / _FloatNx handling for the last two points in glibc is trickier, since __STDC_WANT_IEC_60559_TYPES_EXT__ is still in C2X (the integration of TS 18661-3 as an Annex, that is, which hasn't yet been merged into the C standard git repository but has been accepted by WG14), so C2X with that macro should not declare some things that are declared for older standards with that macro. The approach taken here is to provide the declarations (when __STDC_WANT_IEC_60559_TYPES_EXT__ is enabled) only when (defined __USE_GNU || !__GLIBC_USE (ISOC2X)), so if C2X features are enabled then those declarations (that are only in TS 18661-3 and not in C2X) will only be provided if _GNU_SOURCE is defined as well. Thus _GNU_SOURCE remains a superset of the TS features as well as of C2X. Some other somewhat related changes in C2X are not addressed here. There's an open proposal not to include the fmin and fmax functions for the _FloatN / _FloatNx types, given the new min/max operations, which could be handled like the previous point if adopted. And the fromfp functions have been changed to return a result in floating type rather than intmax_t / uintmax_t; my inclination there is to treat that like that change of totalorder type (new symbol versions etc. for the ABI change; old versions become compat symbols and are no longer supported as an API). Tested for x86_64 and x86.
296 lines
12 KiB
Plaintext
296 lines
12 KiB
Plaintext
@node Feature Test Macros
|
|
@subsection Feature Test Macros
|
|
|
|
@cindex feature test macros
|
|
The exact set of features available when you compile a source file
|
|
is controlled by which @dfn{feature test macros} you define.
|
|
|
|
If you compile your programs using @samp{gcc -ansi}, you get only the
|
|
@w{ISO C} library features, unless you explicitly request additional
|
|
features by defining one or more of the feature macros.
|
|
@xref{Invoking GCC,, GNU CC Command Options, gcc, The GNU CC Manual},
|
|
for more information about GCC options.@refill
|
|
|
|
You should define these macros by using @samp{#define} preprocessor
|
|
directives at the top of your source code files. These directives
|
|
@emph{must} come before any @code{#include} of a system header file. It
|
|
is best to make them the very first thing in the file, preceded only by
|
|
comments. You could also use the @samp{-D} option to GCC, but it's
|
|
better if you make the source files indicate their own meaning in a
|
|
self-contained way.
|
|
|
|
This system exists to allow the library to conform to multiple standards.
|
|
Although the different standards are often described as supersets of each
|
|
other, they are usually incompatible because larger standards require
|
|
functions with names that smaller ones reserve to the user program. This
|
|
is not mere pedantry --- it has been a problem in practice. For instance,
|
|
some non-GNU programs define functions named @code{getline} that have
|
|
nothing to do with this library's @code{getline}. They would not be
|
|
compilable if all features were enabled indiscriminately.
|
|
|
|
This should not be used to verify that a program conforms to a limited
|
|
standard. It is insufficient for this purpose, as it will not protect you
|
|
from including header files outside the standard, or relying on semantics
|
|
undefined within the standard.
|
|
|
|
@defvr Macro _POSIX_SOURCE
|
|
@standards{POSIX.1, (none)}
|
|
If you define this macro, then the functionality from the POSIX.1
|
|
standard (IEEE Standard 1003.1) is available, as well as all of the
|
|
@w{ISO C} facilities.
|
|
|
|
The state of @code{_POSIX_SOURCE} is irrelevant if you define the
|
|
macro @code{_POSIX_C_SOURCE} to a positive integer.
|
|
@end defvr
|
|
|
|
@defvr Macro _POSIX_C_SOURCE
|
|
@standards{POSIX.2, (none)}
|
|
Define this macro to a positive integer to control which POSIX
|
|
functionality is made available. The greater the value of this macro,
|
|
the more functionality is made available.
|
|
|
|
If you define this macro to a value greater than or equal to @code{1},
|
|
then the functionality from the 1990 edition of the POSIX.1 standard
|
|
(IEEE Standard 1003.1-1990) is made available.
|
|
|
|
If you define this macro to a value greater than or equal to @code{2},
|
|
then the functionality from the 1992 edition of the POSIX.2 standard
|
|
(IEEE Standard 1003.2-1992) is made available.
|
|
|
|
If you define this macro to a value greater than or equal to @code{199309L},
|
|
then the functionality from the 1993 edition of the POSIX.1b standard
|
|
(IEEE Standard 1003.1b-1993) is made available.
|
|
|
|
If you define this macro to a value greater than or equal to
|
|
@code{199506L}, then the functionality from the 1995 edition of the
|
|
POSIX.1c standard (IEEE Standard 1003.1c-1995) is made available.
|
|
|
|
If you define this macro to a value greater than or equal to
|
|
@code{200112L}, then the functionality from the 2001 edition of the
|
|
POSIX standard (IEEE Standard 1003.1-2001) is made available.
|
|
|
|
If you define this macro to a value greater than or equal to
|
|
@code{200809L}, then the functionality from the 2008 edition of the
|
|
POSIX standard (IEEE Standard 1003.1-2008) is made available.
|
|
|
|
Greater values for @code{_POSIX_C_SOURCE} will enable future extensions.
|
|
The POSIX standards process will define these values as necessary, and
|
|
@theglibc{} should support them some time after they become standardized.
|
|
The 1996 edition of POSIX.1 (ISO/IEC 9945-1: 1996) states that
|
|
if you define @code{_POSIX_C_SOURCE} to a value greater than
|
|
or equal to @code{199506L}, then the functionality from the 1996
|
|
edition is made available. In general, in @theglibc{}, bugfixes to
|
|
the standards are included when specifying the base version; e.g.,
|
|
POSIX.1-2004 will always be included with a value of @code{200112L}.
|
|
@end defvr
|
|
|
|
@defvr Macro _XOPEN_SOURCE
|
|
@defvrx Macro _XOPEN_SOURCE_EXTENDED
|
|
@standards{X/Open, (none)}
|
|
If you define this macro, functionality described in the X/Open
|
|
Portability Guide is included. This is a superset of the POSIX.1 and
|
|
POSIX.2 functionality and in fact @code{_POSIX_SOURCE} and
|
|
@code{_POSIX_C_SOURCE} are automatically defined.
|
|
|
|
As the unification of all Unices, functionality only available in
|
|
BSD and SVID is also included.
|
|
|
|
If the macro @code{_XOPEN_SOURCE_EXTENDED} is also defined, even more
|
|
functionality is available. The extra functions will make all functions
|
|
available which are necessary for the X/Open Unix brand.
|
|
|
|
If the macro @code{_XOPEN_SOURCE} has the value @math{500} this includes
|
|
all functionality described so far plus some new definitions from the
|
|
Single Unix Specification, @w{version 2}. The value @math{600}
|
|
(corresponding to the sixth revision) includes definitions from SUSv3,
|
|
and using @math{700} (the seventh revision) includes definitions from
|
|
SUSv4.
|
|
@end defvr
|
|
|
|
@defvr Macro _LARGEFILE_SOURCE
|
|
@standards{X/Open, (NONE)}
|
|
If this macro is defined some extra functions are available which
|
|
rectify a few shortcomings in all previous standards. Specifically,
|
|
the functions @code{fseeko} and @code{ftello} are available. Without
|
|
these functions the difference between the @w{ISO C} interface
|
|
(@code{fseek}, @code{ftell}) and the low-level POSIX interface
|
|
(@code{lseek}) would lead to problems.
|
|
|
|
This macro was introduced as part of the Large File Support extension (LFS).
|
|
@end defvr
|
|
|
|
@defvr Macro _LARGEFILE64_SOURCE
|
|
@standards{X/Open, (NONE)}
|
|
If you define this macro an additional set of functions is made available
|
|
which enables @w{32 bit} systems to use files of sizes beyond
|
|
the usual limit of 2GB. This interface is not available if the system
|
|
does not support files that large. On systems where the natural file
|
|
size limit is greater than 2GB (i.e., on @w{64 bit} systems) the new
|
|
functions are identical to the replaced functions.
|
|
|
|
The new functionality is made available by a new set of types and
|
|
functions which replace the existing ones. The names of these new objects
|
|
contain @code{64} to indicate the intention, e.g., @code{off_t}
|
|
vs. @code{off64_t} and @code{fseeko} vs. @code{fseeko64}.
|
|
|
|
This macro was introduced as part of the Large File Support extension
|
|
(LFS). It is a transition interface for the period when @w{64 bit}
|
|
offsets are not generally used (see @code{_FILE_OFFSET_BITS}).
|
|
@end defvr
|
|
|
|
@defvr Macro _FILE_OFFSET_BITS
|
|
@standards{X/Open, (NONE)}
|
|
This macro determines which file system interface shall be used, one
|
|
replacing the other. Whereas @code{_LARGEFILE64_SOURCE} makes the @w{64
|
|
bit} interface available as an additional interface,
|
|
@code{_FILE_OFFSET_BITS} allows the @w{64 bit} interface to
|
|
replace the old interface.
|
|
|
|
If @code{_FILE_OFFSET_BITS} is undefined, or if it is defined to the
|
|
value @code{32}, nothing changes. The @w{32 bit} interface is used and
|
|
types like @code{off_t} have a size of @w{32 bits} on @w{32 bit}
|
|
systems.
|
|
|
|
If the macro is defined to the value @code{64}, the large file interface
|
|
replaces the old interface. I.e., the functions are not made available
|
|
under different names (as they are with @code{_LARGEFILE64_SOURCE}).
|
|
Instead the old function names now reference the new functions, e.g., a
|
|
call to @code{fseeko} now indeed calls @code{fseeko64}.
|
|
|
|
This macro should only be selected if the system provides mechanisms for
|
|
handling large files. On @w{64 bit} systems this macro has no effect
|
|
since the @code{*64} functions are identical to the normal functions.
|
|
|
|
This macro was introduced as part of the Large File Support extension
|
|
(LFS).
|
|
@end defvr
|
|
|
|
@defvr Macro _ISOC99_SOURCE
|
|
@standards{GNU, (none)}
|
|
If this macro is defined, features from ISO C99 are included. Since
|
|
these features are included by default, this macro is mostly relevant
|
|
when the compiler uses an earlier language version.
|
|
@end defvr
|
|
|
|
@defvr Macro _ISOC11_SOURCE
|
|
@standards{C11, (none)}
|
|
If this macro is defined, ISO C11 extensions to ISO C99 are included.
|
|
@end defvr
|
|
|
|
@defvr Macro _ISOC2X_SOURCE
|
|
@standards{C2X, (none)}
|
|
If this macro is defined, ISO C2X extensions to ISO C11 are included.
|
|
Only some features from this draft standard are supported by
|
|
@theglibc{}.
|
|
@end defvr
|
|
|
|
@defvr Macro __STDC_WANT_LIB_EXT2__
|
|
@standards{ISO, (none)}
|
|
If you define this macro to the value @code{1}, features from ISO/IEC
|
|
TR 24731-2:2010 (Dynamic Allocation Functions) are enabled. Only some
|
|
of the features from this TR are supported by @theglibc{}.
|
|
@end defvr
|
|
|
|
@defvr Macro __STDC_WANT_IEC_60559_BFP_EXT__
|
|
@standards{ISO, (none)}
|
|
If you define this macro, features from ISO/IEC TS 18661-1:2014
|
|
(Floating-point extensions for C: Binary floating-point arithmetic)
|
|
are enabled. Only some of the features from this TS are supported by
|
|
@theglibc{}.
|
|
@end defvr
|
|
|
|
@defvr Macro __STDC_WANT_IEC_60559_FUNCS_EXT__
|
|
@standards{ISO, (none)}
|
|
If you define this macro, features from ISO/IEC TS 18661-4:2015
|
|
(Floating-point extensions for C: Supplementary functions) are
|
|
enabled. Only some of the features from this TS are supported by
|
|
@theglibc{}.
|
|
@end defvr
|
|
|
|
@defvr Macro __STDC_WANT_IEC_60559_TYPES_EXT__
|
|
@standards{ISO, (none)}
|
|
If you define this macro, features from ISO/IEC TS 18661-3:2015
|
|
(Floating-point extensions for C: Interchange and extended types) are
|
|
enabled. Only some of the features from this TS are supported by
|
|
@theglibc{}.
|
|
@end defvr
|
|
|
|
@defvr Macro __STDC_WANT_IEC_60559_EXT__
|
|
@standards{ISO, (none)}
|
|
If you define this macro, ISO C2X features defined in Annex F of that
|
|
standard are enabled. This affects declarations of the
|
|
@code{totalorder} functions and functions related to NaN payloads.
|
|
@end defvr
|
|
|
|
@defvr Macro _GNU_SOURCE
|
|
@standards{GNU, (none)}
|
|
If you define this macro, everything is included: @w{ISO C89}, @w{ISO
|
|
C99}, POSIX.1, POSIX.2, BSD, SVID, X/Open, LFS, and GNU extensions. In
|
|
the cases where POSIX.1 conflicts with BSD, the POSIX definitions take
|
|
precedence.
|
|
@end defvr
|
|
|
|
@defvr Macro _DEFAULT_SOURCE
|
|
@standards{GNU, (none)}
|
|
If you define this macro, most features are included apart from
|
|
X/Open, LFS and GNU extensions: the effect is to enable features from
|
|
the 2008 edition of POSIX, as well as certain BSD and SVID features
|
|
without a separate feature test macro to control them.
|
|
|
|
Be aware that compiler options also affect included features:
|
|
|
|
@itemize
|
|
@item
|
|
If you use a strict conformance option, features beyond those from the
|
|
compiler's language version will be disabled, though feature test
|
|
macros may be used to enable them.
|
|
|
|
@item
|
|
Features enabled by compiler options are not overridden by feature
|
|
test macros.
|
|
@end itemize
|
|
@end defvr
|
|
|
|
@defvr Macro _ATFILE_SOURCE
|
|
@standards{GNU, (none)}
|
|
If this macro is defined, additional @code{*at} interfaces are
|
|
included.
|
|
@end defvr
|
|
|
|
@defvr Macro _FORTIFY_SOURCE
|
|
@standards{GNU, (none)}
|
|
If this macro is defined to @math{1}, security hardening is added to
|
|
various library functions. If defined to @math{2}, even stricter
|
|
checks are applied. If defined to @math{3}, @theglibc{} may also use
|
|
checks that may have an additional performance overhead.
|
|
@end defvr
|
|
|
|
@defvr Macro _SC_SIGSTKSZ_SOURCE
|
|
@standards{GNU, (none)}
|
|
If this macro is defined, correct (but non compile-time constant)
|
|
MINSIGSTKSZ and SIGSTKSZ are defined.
|
|
@end defvr
|
|
|
|
@defvr Macro _REENTRANT
|
|
@defvrx Macro _THREAD_SAFE
|
|
@standards{Obsolete, (none)}
|
|
These macros are obsolete. They have the same effect as defining
|
|
@code{_POSIX_C_SOURCE} with the value @code{199506L}.
|
|
|
|
Some very old C libraries required one of these macros to be defined
|
|
for basic functionality (e.g.@: @code{getchar}) to be thread-safe.
|
|
@end defvr
|
|
|
|
We recommend you use @code{_GNU_SOURCE} in new programs. If you don't
|
|
specify the @samp{-ansi} option to GCC, or other conformance options
|
|
such as @option{-std=c99}, and don't define any of these macros
|
|
explicitly, the effect is the same as defining @code{_DEFAULT_SOURCE}
|
|
to 1.
|
|
|
|
When you define a feature test macro to request a larger class of features,
|
|
it is harmless to define in addition a feature test macro for a subset of
|
|
those features. For example, if you define @code{_POSIX_C_SOURCE}, then
|
|
defining @code{_POSIX_SOURCE} as well has no effect. Likewise, if you
|
|
define @code{_GNU_SOURCE}, then defining either @code{_POSIX_SOURCE} or
|
|
@code{_POSIX_C_SOURCE} as well has no effect.
|