glibc/libio/fileops.c
Ulrich Drepper 8619129f3f Update.
1998-04-20 18:00  Ulrich Drepper  <drepper@cygnus.com>

	* libc.map: Add __dgettext to GLIBC_2.0 and __libc_longjmp, and
	__libc_siglongjmp to GLIBC_2.1.

	* elf/dl-minimal.c (__assert_perror_fail): Don't use strerror, use
	__strerror_r.

	* iconv/Makefile: Don't run tests now.

	* iconv/iconv_prog.c (process_block): If loop is repeated, call iconv
	with correct output buffer.

	Major rewrite of the low-level gconv functionality.
	* iconv/gconv.c: Rewritten.
	* iconv/gconv.h: Likewise.
	* iconv/gconv_builtin.c: Likewise.
	* iconv/gconv_builtin.h: Likewise.
	* iconv/gconv_conf.c: Likewise.
	* iconv/gconv_int.h: Likewise.
	* iconv/gconv_open.c: Likewise.
	* iconv/gconv_simple.c: Likewise.
	* iconv/iconv.c: Likewise.
	* iconvdata/8bit-gap.c: Likewise.
	* iconvdata/8bit-generic.c: Likewise.
	* iconvdata/Makefile: Likewise.
	* iconvdata/big5.c: Likewise.
	* iconvdata/cns11643.c: Likewise.
	* iconvdata/cns11643.h: Likewise.
	* iconvdata/cns11643l1.c: Likewise.
	* iconvdata/cns11643l1.h: Likewise.
	* iconvdata/ebcdic-at-de-a.c: Likewise.
	* iconvdata/ebcdic-at-de.c: Likewise.
	* iconvdata/ebcdic-ca-fr.c: Likewise.
	* iconvdata/euccn.c: Likewise.
	* iconvdata/eucjp.c: Likewise.
	* iconvdata/euckr.c: Likewise.
	* iconvdata/euctw.c: Likewise.
	* iconvdata/gb2312.c: Likewise.
	* iconvdata/gb2312.h: Likewise.
	* iconvdata/hp-roman8.c: Likewise.
	* iconvdata/iso646.c: Likewise.
	* iconvdata/iso6937.c: Likewise.
	* iconvdata/iso8859-1.c: Likewise.
	* iconvdata/iso8859-10.c: Likewise.
	* iconvdata/iso8859-2.c: Likewise.
	* iconvdata/iso8859-3.c: Likewise.
	* iconvdata/iso8859-4.c: Likewise.
	* iconvdata/iso8859-5.c: Likewise.
	* iconvdata/iso8859-6.c: Likewise.
	* iconvdata/iso8859-7.c: Likewise.
	* iconvdata/iso8859-8.c: Likewise.
	* iconvdata/iso8859-9.c: Likewise.
	* iconvdata/jis0201.c: Likewise.
	* iconvdata/jis0201.h: Likewise.
	* iconvdata/jis0208.c: Likewise.
	* iconvdata/jis0208.h: Likewise.
	* iconvdata/jis0212.c: Likewise.
	* iconvdata/jis0212.h: Likewise.
	* iconvdata/johab.c: Likewise.
	* iconvdata/koi-8.c: Likewise.
	* iconvdata/koi8-r.c: Likewise.
	* iconvdata/ksc5601.c: Likewise.
	* iconvdata/ksc5601.h: Likewise.
	* iconvdata/latin-greek-1.c: Likewise.
	* iconvdata/latin-greek.c: Likewise.
	* iconvdata/run-iconv-test.sh: Likewise.
	* iconvdata/sjis.c: Likewise.
	* iconvdata/t61.c: Likewise.
	* iconvdata/uhc.c: Likewise.
	* wcsmbs/btowc.c: Likewise.
	* wcsmbs/mbrtowc.c: Likewise.
	* wcsmbs/mbsnrtowcs.c: Likewise.
	* wcsmbs/mbsrtowcs.c: Likewise.
	* wcsmbs/wcrtomb.c: Likewise.
	* wcsmbs/wcsmbsload.c: Likewise.
	* wcsmbs/wcsnrtombs.c: Likewise.
	* wcsmbs/wcsrtombs.c: Likewise.
	* wcsmbs/wctob.c: Likewise.
	* iconv/loop.c: New file.
	* iconv/skeleton.c: New file.

	* stdlib/mblen.c: Handle empty input string correctly.
	* stdlib/mbtowc.c: Likewise.

	* posix/getopt.c: Various cleanups.

	* sysdeps/arm/bits/setjmp.h: Add copyright text.
	* sysdeps/i386/bits/setjmp.h: Likewise.
	* sysdeps/m68k/bits/setjmp.h: Likewise.
	* sysdeps/powerpc/bits/setjmp.h: Likewise.
	* sysdeps/sparc/sparc32/bits/setjmp.h: Likewise.

	* sysdeps/generic/longjmp.c: Rename function to __libc_siglongjmp
	and make longjmp weak alias.

1998-04-18 20:29  Philip Blundell  <Philip.Blundell@pobox.com>

	* iconv/Makefile (routines): Only include gconv_dl if building for
	an ELF system - dynamic linking is not available on a.out.
	(CFLAGS-gconv_conf.c): Define STATIC_GCONV if omitting gconv_dl
	due to above check.
	* iconv/gconv_db.c: If STATIC_GCONV defined, don't try to call
	routines from gconv_dl.

1998-04-17  Gordon Matzigkeit  <gord@profitpress.com>

	* csu/init.c (_IO_stdin_used): Protect with USE_IN_LIBIO so that
	we can compile without libio.

1998-04-20 16:28  Ulrich Drepper  <drepper@cygnus.com>

	* sysdeps/mach/hurd/Subdirs: Remove login.

1998-04-11  Gordon Matzigkeit  <gord@profitpress.com>

	* db2/compat.h: Include <errno.h>, to make sure we get the
	definition of EFTYPE before we define it ourselves.

1998-04-10  Gordon Matzigkeit  <gord@profitpress.com>

	* sysdeps/generic/bits/socket.h: Protect against multiple inclusion.
	* sysdeps/mach/hurd/bits/ioctls.h: Likewise.
	Fix typo to allow inclusion from sys/ioctl.h again.

1998-04-16  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>

	* iconvdata/*.[ch]: Clean up namespace.  Optimize character lookup.

1998-04-16  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>

	* libc.map: Export __strerror_r.  Remove _strerror_internal.

1998-04-16  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>

	* sysdeps/generic/strcasestr.c: Undefine strcasestr, not strstr.
	Also undefine __strcasestr.

1998-04-16  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>

	* posix/regex.c: Rename __re_max_failures back to re_max_failures,
	aliases do not work with global variables due to copy relocations.

1998-04-20 15:12  Ulrich Drepper  <drepper@cygnus.com>

	* manual/creature.texi: Fix type.  Patch by Andreas Schwab.

1998-04-20 13:47  Ulrich Drepper  <drepper@cygnus.com>

	* signal/sighold.c: Include stddef.h for NULL definition.
	* signal/sigrelse.c: Likewise.
	* sysdeps/posix/sigignore.c: Likewise.
	* sysdeps/posix/sigset.c: Likewise.
	* sysdeps/posix/waitid.c: Likewise.
	* sysdeps/unix/sysv/linux/rt_sigsuspend.c: Likewise.
	* sysdeps/unix/sysv/linux/rt_sigtimedwait.c: Likewise.
	* sysdeps/unix/sysv/linux/sigwaitinfo.c: Likewise.
	* wcsmbs/mbsrtowcs.c: Include stdlib.h for MB_CUR_MAX.
	Patch by Franz Sirl <Franz.Sirl-kernel@lauterbach.com>.

1998-04-13  Mark Kettenis  <kettenis@phys.uva.nl>

	* login/Makefile (headers): Remove utmpx.h and bits/utmpx.h.
	* login/getutent.c (getutxent): Remove alias.
	* login/getutent_r.c (setutxent, pututxline, endutxent):
	Remove aliases.
	* login/getutid.c (getutxid): Remove alias.
	* login/getutline.c (getutxline): Remove alias.
	* login/utmp.h: Add prototypes for __updwtmp, __getutent,
	__getutid, __getutline and __pututline.
	* login/utmpx.h: Moved to ...
	* sysdeps/gnu/utmpx.h: ... here.  [__USE_GNU]: Define UTMPX_FILE,
	UTMPX_FILENAME, WTMPX_FILE and WTMPX_FILENAME, declare utmpxname
	and updwtmpx.
	* login/updwtmp.c: Moved to ...
	* sysdeps/generic/updwtmp.c: ... here.  (updwtmp): Generalized by
	allowing file name transformation.
	* sysdeps/gnu/updwtmp.c: New file.  Use generic implementation with
	additional file name transformation.
	* sysdeps/unix/sysv/linux/updwtmp.c: Likewise.
	* login/utmp_file.c: Moved to ...
	* sysdeps/generic/utmp_file.c: ... here.  (setutent_file):
	Generalized by allowing file name transformation.  Do not
	print error message.  Library functions should not print them.
	Reported by Jim Meyering.
	* sysdeps/gnu/utmp_file.c: New file.  Use generic implementation
	with additional file name transformation.
	* sysdeps/unix/sysv/linux/utmp_file.c: Likewise.
	* sysdeps/gnu/Makefile [$(subdir)=login] (sysdep_routines): Add
	setutxent, getutxent, endutxent, getutxid, getutxid, getutxline,
	pututxline, utmpxname and updwtmpx.  (sysdep_headers): Add utmpx.h
	and bits/utmpx.h.
	* sysdeps/gnu/bits/utmpx.h [__USE_GNU] Include paths.h.
	(_PATH_UTMPX): Define to _PATH_UTMP.  (_PATH_WTMPX): Define to
	_PATH_WTMPX.  (RUN_LVL): Define only if __USE_GNU.  (ACCOUNTING):
	Define if __USE_GNU.
	* sysdeps/gnu/setutxent.c: New file.
	* sysdeps/gnu/getutxent.c: New file.
	* sysdeps/gnu/endutxent.c: New file.
	* sysdeps/gnu/getutxid.c: New file.
	* sysdeps/gnu/getutxline.c: New file.
	* sysdeps/gnu/pututxline.c: New file.
	* sysdeps/gnu/utmpxname.c: New file.
	* sysdeps/gnu/updwtmpx.c: New file.
	* sysdeps/unix/sysv/linux/paths.h (_PATH_UTMP_DB): Remove.
	* sysdeps/generic/bits/utmpx.h: Remove.

1998-04-20  Ulrich Drepper  <drepper@cygnus.com>

	* posix/wordexp-test.c (main): Initialize ifs element of ts for
	~root test.

1998-04-17 07:53  H.J. Lu  <hjl@gnu.org>

	* sysdeps/unix/sysv/linux/i386/s_pread64.S: Fix a typo.

1998-04-17 11:32  Ulrich Drepper  <drepper@cygnus.com>

	* libio/oldfileops.c (_IO_old_file_seekoff): Define temporary st
	variable using _G_stat64.
	* libio/fileops.c: Remove macro definition of fstat, it is in the
	global header.
	Reported by Thorsten Kukuk <kukuk@weber.uni-paderborn.de>.

1998-04-17  Philip Blundell  <pb@nexus.co.uk>

	* sysdeps/arm/strlen.S: New file, based on code by Matthew Wilcox
	<willy@odie.barnet.ac.uk>.

1998-04-16  Philip Blundell  <Philip.Blundell@pobox.com>

	* inet/netinet/in.h (IN6_IS_ADDR_MC_NODELOCAL): New macro,
	required by IPv6 Basic API.
	(IN6_IS_ADDR_MC_LINKLOCAL): Likewise.
	(IN6_IS_ADDR_MC_SITELOCAL): Likewise.
	(IN6_IS_ADDR_MC_ORGLOCAL): Likewise.
	(IN6_IS_ADDR_MC_GLOBAL): Likewise.
1998-04-20 18:41:05 +00:00

889 lines
23 KiB
C

/* Copyright (C) 1993, 1995, 1997, 1998 Free Software Foundation, Inc.
This file is part of the GNU IO Library.
Written by Per Bothner <bothner@cygnus.com>.
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU General Public License as
published by the Free Software Foundation; either version 2, or (at
your option) any later version.
This library is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
General Public License for more details.
You should have received a copy of the GNU General Public License
along with this library; see the file COPYING. If not, write to
the Free Software Foundation, 59 Temple Place - Suite 330, Boston,
MA 02111-1307, USA.
As a special exception, if you link this library with files
compiled with a GNU compiler to produce an executable, this does
not cause the resulting executable to be covered by the GNU General
Public License. This exception does not however invalidate any
other reasons why the executable file might be covered by the GNU
General Public License. */
#ifndef _POSIX_SOURCE
# define _POSIX_SOURCE
#endif
#include "libioP.h"
#include <fcntl.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <string.h>
#include <errno.h>
#ifndef errno
extern int errno;
#endif
#ifndef __set_errno
# define __set_errno(Val) errno = (Val)
#endif
#ifdef _LIBC
# define open(Name, Flags, Prot) __open (Name, Flags, Prot)
# define close(FD) __close (FD)
# define lseek(FD, Offset, Whence) __lseek (FD, Offset, Whence)
# define read(FD, Buf, NBytes) __read (FD, Buf, NBytes)
# define write(FD, Buf, NBytes) __write (FD, Buf, NBytes)
#endif
/* An fstream can be in at most one of put mode, get mode, or putback mode.
Putback mode is a variant of get mode.
In a filebuf, there is only one current position, instead of two
separate get and put pointers. In get mode, the current position
is that of gptr(); in put mode that of pptr().
The position in the buffer that corresponds to the position
in external file system is normally _IO_read_end, except in putback
mode, when it is _IO_save_end.
If the field _fb._offset is >= 0, it gives the offset in
the file as a whole corresponding to eGptr(). (?)
PUT MODE:
If a filebuf is in put mode, then all of _IO_read_ptr, _IO_read_end,
and _IO_read_base are equal to each other. These are usually equal
to _IO_buf_base, though not necessarily if we have switched from
get mode to put mode. (The reason is to maintain the invariant
that _IO_read_end corresponds to the external file position.)
_IO_write_base is non-NULL and usually equal to _IO_base_base.
We also have _IO_write_end == _IO_buf_end, but only in fully buffered mode.
The un-flushed character are those between _IO_write_base and _IO_write_ptr.
GET MODE:
If a filebuf is in get or putback mode, eback() != egptr().
In get mode, the unread characters are between gptr() and egptr().
The OS file position corresponds to that of egptr().
PUTBACK MODE:
Putback mode is used to remember "excess" characters that have
been sputbackc'd in a separate putback buffer.
In putback mode, the get buffer points to the special putback buffer.
The unread characters are the characters between gptr() and egptr()
in the putback buffer, as well as the area between save_gptr()
and save_egptr(), which point into the original reserve buffer.
(The pointers save_gptr() and save_egptr() are the values
of gptr() and egptr() at the time putback mode was entered.)
The OS position corresponds to that of save_egptr().
LINE BUFFERED OUTPUT:
During line buffered output, _IO_write_base==base() && epptr()==base().
However, ptr() may be anywhere between base() and ebuf().
This forces a call to filebuf::overflow(int C) on every put.
If there is more space in the buffer, and C is not a '\n',
then C is inserted, and pptr() incremented.
UNBUFFERED STREAMS:
If a filebuf is unbuffered(), the _shortbuf[1] is used as the buffer.
*/
#define CLOSED_FILEBUF_FLAGS \
(_IO_IS_FILEBUF+_IO_NO_READS+_IO_NO_WRITES+_IO_TIED_PUT_GET)
void
_IO_file_init (fp)
_IO_FILE *fp;
{
/* POSIX.1 allows another file handle to be used to change the position
of our file descriptor. Hence we actually don't know the actual
position before we do the first fseek (and until a following fflush). */
fp->_offset = _IO_pos_BAD;
fp->_IO_file_flags |= CLOSED_FILEBUF_FLAGS;
_IO_link_in(fp);
fp->_fileno = -1;
}
int
_IO_file_close_it (fp)
_IO_FILE *fp;
{
int write_status, close_status;
if (!_IO_file_is_open (fp))
return EOF;
write_status = _IO_do_flush (fp);
_IO_unsave_markers(fp);
close_status = _IO_SYSCLOSE (fp);
/* Free buffer. */
_IO_setb (fp, NULL, NULL, 0);
_IO_setg (fp, NULL, NULL, NULL);
_IO_setp (fp, NULL, NULL);
_IO_un_link (fp);
fp->_flags = _IO_MAGIC|CLOSED_FILEBUF_FLAGS;
fp->_fileno = EOF;
fp->_offset = _IO_pos_BAD;
return close_status ? close_status : write_status;
}
void
_IO_file_finish (fp, dummy)
_IO_FILE *fp;
int dummy;
{
if (_IO_file_is_open (fp))
{
_IO_do_flush (fp);
if (!(fp->_flags & _IO_DELETE_DONT_CLOSE))
_IO_SYSCLOSE (fp);
}
_IO_default_finish (fp, 0);
}
#if defined __GNUC__ && __GNUC__ >= 2
__inline__
#endif
_IO_FILE *
_IO_file_open (fp, filename, posix_mode, prot, read_write, is32not64)
_IO_FILE *fp;
const char *filename;
int posix_mode;
int prot;
int read_write;
int is32not64;
{
int fdesc;
#ifdef _G_OPEN64
fdesc = (is32not64
? open (filename, posix_mode, prot)
: _G_OPEN64 (filename, posix_mode, prot));
#else
fdesc = open (filename, posix_mode, prot);
#endif
if (fdesc < 0)
return NULL;
fp->_fileno = fdesc;
_IO_mask_flags (fp, read_write,_IO_NO_READS+_IO_NO_WRITES+_IO_IS_APPENDING);
if (read_write & _IO_IS_APPENDING)
if (_IO_SEEKOFF (fp, (_IO_off64_t)0, _IO_seek_end, _IOS_INPUT|_IOS_OUTPUT)
== _IO_pos_BAD && errno != ESPIPE)
return NULL;
_IO_link_in (fp);
return fp;
}
_IO_FILE *
_IO_file_fopen (fp, filename, mode, is32not64)
_IO_FILE *fp;
const char *filename;
const char *mode;
int is32not64;
{
int oflags = 0, omode;
int read_write;
int oprot = 0666;
int i;
if (_IO_file_is_open (fp))
return 0;
switch (*mode)
{
case 'r':
omode = O_RDONLY;
read_write = _IO_NO_WRITES;
break;
case 'w':
omode = O_WRONLY;
oflags = O_CREAT|O_TRUNC;
read_write = _IO_NO_READS;
break;
case 'a':
omode = O_WRONLY;
oflags = O_CREAT|O_APPEND;
read_write = _IO_NO_READS|_IO_IS_APPENDING;
break;
default:
__set_errno (EINVAL);
return NULL;
}
for (i = 1; i < 4; ++i)
{
switch (*++mode)
{
case '\0':
break;
case '+':
omode = O_RDWR;
read_write &= _IO_IS_APPENDING;
continue;
case 'x':
oflags |= O_EXCL;
continue;
case 'b':
default:
/* Ignore. */
continue;
}
break;
}
return _IO_file_open (fp, filename, omode|oflags, oprot, read_write,
is32not64);
}
_IO_FILE *
_IO_file_attach (fp, fd)
_IO_FILE *fp;
int fd;
{
if (_IO_file_is_open (fp))
return NULL;
fp->_fileno = fd;
fp->_flags &= ~(_IO_NO_READS+_IO_NO_WRITES);
fp->_flags |= _IO_DELETE_DONT_CLOSE;
/* Get the current position of the file. */
/* We have to do that since that may be junk. */
fp->_offset = _IO_pos_BAD;
if (_IO_SEEKOFF (fp, (_IO_off64_t)0, _IO_seek_cur, _IOS_INPUT|_IOS_OUTPUT)
== _IO_pos_BAD && errno != ESPIPE)
return NULL;
return fp;
}
_IO_FILE *
_IO_file_setbuf (fp, p, len)
_IO_FILE *fp;
char *p;
_IO_ssize_t len;
{
if (_IO_default_setbuf (fp, p, len) == NULL)
return NULL;
fp->_IO_write_base = fp->_IO_write_ptr = fp->_IO_write_end
= fp->_IO_buf_base;
_IO_setg (fp, fp->_IO_buf_base, fp->_IO_buf_base, fp->_IO_buf_base);
return fp;
}
/* Write TO_DO bytes from DATA to FP.
Then mark FP as having empty buffers. */
int
_IO_do_write (fp, data, to_do)
_IO_FILE *fp;
const char *data;
_IO_size_t to_do;
{
_IO_size_t count;
if (to_do == 0)
return 0;
if (fp->_flags & _IO_IS_APPENDING)
/* On a system without a proper O_APPEND implementation,
you would need to sys_seek(0, SEEK_END) here, but is
is not needed nor desirable for Unix- or Posix-like systems.
Instead, just indicate that offset (before and after) is
unpredictable. */
fp->_offset = _IO_pos_BAD;
else if (fp->_IO_read_end != fp->_IO_write_base)
{
_IO_fpos64_t new_pos
= _IO_SYSSEEK (fp, fp->_IO_write_base - fp->_IO_read_end, 1);
if (new_pos == _IO_pos_BAD)
return EOF;
fp->_offset = new_pos;
}
count = _IO_SYSWRITE (fp, data, to_do);
if (fp->_cur_column)
fp->_cur_column = _IO_adjust_column (fp->_cur_column - 1, data, to_do) + 1;
_IO_setg (fp, fp->_IO_buf_base, fp->_IO_buf_base, fp->_IO_buf_base);
fp->_IO_write_base = fp->_IO_write_ptr = fp->_IO_buf_base;
fp->_IO_write_end = ((fp->_flags & (_IO_LINE_BUF+_IO_UNBUFFERED))
? fp->_IO_buf_base : fp->_IO_buf_end);
return count != to_do ? EOF : 0;
}
int
_IO_file_underflow (fp)
_IO_FILE *fp;
{
_IO_ssize_t count;
#if 0
/* SysV does not make this test; take it out for compatibility */
if (fp->_flags & _IO_EOF_SEEN)
return (EOF);
#endif
if (fp->_flags & _IO_NO_READS)
{
__set_errno (EBADF);
return EOF;
}
if (fp->_IO_read_ptr < fp->_IO_read_end)
return *(unsigned char *) fp->_IO_read_ptr;
if (fp->_IO_buf_base == NULL)
_IO_doallocbuf (fp);
/* Flush all line buffered files before reading. */
/* FIXME This can/should be moved to genops ?? */
if (fp->_flags & (_IO_LINE_BUF|_IO_UNBUFFERED))
_IO_flush_all_linebuffered ();
_IO_switch_to_get_mode (fp);
/* This is very tricky. We have to adjust those
pointers before we call _IO_SYSREAD () since
we may longjump () out while waiting for
input. Those pointers may be screwed up. H.J. */
fp->_IO_read_base = fp->_IO_read_ptr = fp->_IO_buf_base;
fp->_IO_read_end = fp->_IO_buf_base;
fp->_IO_write_base = fp->_IO_write_ptr = fp->_IO_write_end
= fp->_IO_buf_base;
count = _IO_SYSREAD (fp, fp->_IO_buf_base,
fp->_IO_buf_end - fp->_IO_buf_base);
if (count <= 0)
{
if (count == 0)
fp->_flags |= _IO_EOF_SEEN;
else
fp->_flags |= _IO_ERR_SEEN, count = 0;
}
fp->_IO_read_end += count;
if (count == 0)
return EOF;
if (fp->_offset != _IO_pos_BAD)
_IO_pos_adjust (fp->_offset, count);
return *(unsigned char *) fp->_IO_read_ptr;
}
int
_IO_file_overflow (f, ch)
_IO_FILE *f;
int ch;
{
if (f->_flags & _IO_NO_WRITES) /* SET ERROR */
{
f->_flags |= _IO_ERR_SEEN;
__set_errno (EBADF);
return EOF;
}
/* If currently reading or no buffer allocated. */
if ((f->_flags & _IO_CURRENTLY_PUTTING) == 0)
{
/* Allocate a buffer if needed. */
if (f->_IO_write_base == 0)
{
_IO_doallocbuf (f);
_IO_setg (f, f->_IO_buf_base, f->_IO_buf_base, f->_IO_buf_base);
}
/* Otherwise must be currently reading.
If _IO_read_ptr (and hence also _IO_read_end) is at the buffer end,
logically slide the buffer forwards one block (by setting the
read pointers to all point at the beginning of the block). This
makes room for subsequent output.
Otherwise, set the read pointers to _IO_read_end (leaving that
alone, so it can continue to correspond to the external position). */
if (f->_IO_read_ptr == f->_IO_buf_end)
f->_IO_read_end = f->_IO_read_ptr = f->_IO_buf_base;
f->_IO_write_ptr = f->_IO_read_ptr;
f->_IO_write_base = f->_IO_write_ptr;
f->_IO_write_end = f->_IO_buf_end;
f->_IO_read_base = f->_IO_read_ptr = f->_IO_read_end;
if (f->_flags & (_IO_LINE_BUF+_IO_UNBUFFERED))
f->_IO_write_end = f->_IO_write_ptr;
f->_flags |= _IO_CURRENTLY_PUTTING;
}
if (ch == EOF)
return _IO_do_flush (f);
if (f->_IO_write_ptr == f->_IO_buf_end ) /* Buffer is really full */
if (_IO_do_flush (f) == EOF)
return EOF;
*f->_IO_write_ptr++ = ch;
if ((f->_flags & _IO_UNBUFFERED)
|| ((f->_flags & _IO_LINE_BUF) && ch == '\n'))
if (_IO_do_flush (f) == EOF)
return EOF;
return (unsigned char) ch;
}
int
_IO_file_sync (fp)
_IO_FILE *fp;
{
_IO_size_t delta;
int retval = 0;
_IO_cleanup_region_start ((void (*) __P ((void *))) _IO_funlockfile, fp);
_IO_flockfile (fp);
/* char* ptr = cur_ptr(); */
if (fp->_IO_write_ptr > fp->_IO_write_base)
if (_IO_do_flush(fp)) return EOF;
delta = fp->_IO_read_ptr - fp->_IO_read_end;
if (delta != 0)
{
#ifdef TODO
if (_IO_in_backup (fp))
delta -= eGptr () - Gbase ();
#endif
_IO_off64_t new_pos = _IO_SYSSEEK (fp, delta, 1);
if (new_pos != (_IO_off64_t) EOF)
fp->_IO_read_end = fp->_IO_read_ptr;
#ifdef ESPIPE
else if (errno == ESPIPE)
; /* Ignore error from unseekable devices. */
#endif
else
retval = EOF;
}
if (retval != EOF)
fp->_offset = _IO_pos_BAD;
/* FIXME: Cleanup - can this be shared? */
/* setg(base(), ptr, ptr); */
_IO_cleanup_region_end (1);
return retval;
}
_IO_fpos64_t
_IO_file_seekoff (fp, offset, dir, mode)
_IO_FILE *fp;
_IO_off64_t offset;
int dir;
int mode;
{
_IO_fpos64_t result;
_IO_off64_t delta, new_offset;
long count;
/* POSIX.1 8.2.3.7 says that after a call the fflush() the file
offset of the underlying file must be exact. */
int must_be_exact = (fp->_IO_read_base == fp->_IO_read_end
&& fp->_IO_write_base == fp->_IO_write_ptr);
if (mode == 0)
dir = _IO_seek_cur, offset = 0; /* Don't move any pointers. */
/* Flush unwritten characters.
(This may do an unneeded write if we seek within the buffer.
But to be able to switch to reading, we would need to set
egptr to ptr. That can't be done in the current design,
which assumes file_ptr() is eGptr. Anyway, since we probably
end up flushing when we close(), it doesn't make much difference.)
FIXME: simulate mem-papped files. */
if (fp->_IO_write_ptr > fp->_IO_write_base || _IO_in_put_mode (fp))
if (_IO_switch_to_get_mode (fp))
return EOF;
if (fp->_IO_buf_base == NULL)
{
_IO_doallocbuf (fp);
_IO_setp (fp, fp->_IO_buf_base, fp->_IO_buf_base);
_IO_setg (fp, fp->_IO_buf_base, fp->_IO_buf_base, fp->_IO_buf_base);
}
switch (dir)
{
case _IO_seek_cur:
/* Adjust for read-ahead (bytes is buffer). */
offset -= fp->_IO_read_end - fp->_IO_read_ptr;
if (fp->_offset == _IO_pos_BAD)
goto dumb;
/* Make offset absolute, assuming current pointer is file_ptr(). */
offset += _IO_pos_as_off (fp->_offset);
dir = _IO_seek_set;
break;
case _IO_seek_set:
break;
case _IO_seek_end:
{
struct _G_stat64 st;
if (_IO_SYSSTAT (fp, &st) == 0 && S_ISREG (st.st_mode))
{
offset += st.st_size;
dir = _IO_seek_set;
}
else
goto dumb;
}
}
/* At this point, dir==_IO_seek_set. */
/* If destination is within current buffer, optimize: */
if (fp->_offset != _IO_pos_BAD && fp->_IO_read_base != NULL
&& !_IO_in_backup (fp))
{
/* Offset relative to start of main get area. */
_IO_fpos64_t rel_offset = (offset - fp->_offset
+ (fp->_IO_read_end - fp->_IO_read_base));
if (rel_offset >= 0)
{
#if 0
if (_IO_in_backup (fp))
_IO_switch_to_main_get_area (fp);
#endif
if (rel_offset <= fp->_IO_read_end - fp->_IO_read_base)
{
_IO_setg (fp, fp->_IO_buf_base, fp->_IO_buf_base + rel_offset,
fp->_IO_read_end);
_IO_setp (fp, fp->_IO_buf_base, fp->_IO_buf_base);
return offset;
}
#ifdef TODO
/* If we have streammarkers, seek forward by reading ahead. */
if (_IO_have_markers (fp))
{
int to_skip = rel_offset
- (fp->_IO_read_ptr - fp->_IO_read_base);
if (ignore (to_skip) != to_skip)
goto dumb;
return offset;
}
#endif
}
#ifdef TODO
if (rel_offset < 0 && rel_offset >= Bbase () - Bptr ())
{
if (!_IO_in_backup (fp))
_IO_switch_to_backup_area (fp);
gbump (fp->_IO_read_end + rel_offset - fp->_IO_read_ptr);
return offset;
}
#endif
}
#ifdef TODO
_IO_unsave_markers (fp);
#endif
if (fp->_flags & _IO_NO_READS)
goto dumb;
/* Try to seek to a block boundary, to improve kernel page management. */
new_offset = offset & ~(fp->_IO_buf_end - fp->_IO_buf_base - 1);
delta = offset - new_offset;
if (delta > fp->_IO_buf_end - fp->_IO_buf_base)
{
new_offset = offset;
delta = 0;
}
result = _IO_SYSSEEK (fp, new_offset, 0);
if (result < 0)
return EOF;
if (delta == 0)
count = 0;
else
{
count = _IO_SYSREAD (fp, fp->_IO_buf_base,
(must_be_exact
? delta : fp->_IO_buf_end - fp->_IO_buf_base));
if (count < delta)
{
/* We weren't allowed to read, but try to seek the remainder. */
offset = count == EOF ? delta : delta-count;
dir = _IO_seek_cur;
goto dumb;
}
}
_IO_setg (fp, fp->_IO_buf_base, fp->_IO_buf_base + delta,
fp->_IO_buf_base + count);
_IO_setp (fp, fp->_IO_buf_base, fp->_IO_buf_base);
fp->_offset = result + count;
_IO_mask_flags (fp, 0, _IO_EOF_SEEN);
return offset;
dumb:
_IO_unsave_markers (fp);
result = _IO_SYSSEEK (fp, offset, dir);
if (result != EOF)
_IO_mask_flags (fp, 0, _IO_EOF_SEEN);
fp->_offset = result;
_IO_setg (fp, fp->_IO_buf_base, fp->_IO_buf_base, fp->_IO_buf_base);
_IO_setp (fp, fp->_IO_buf_base, fp->_IO_buf_base);
return result;
}
_IO_ssize_t
_IO_file_read (fp, buf, size)
_IO_FILE *fp;
void *buf;
_IO_ssize_t size;
{
return read (fp->_fileno, buf, size);
}
_IO_fpos64_t
_IO_file_seek (fp, offset, dir)
_IO_FILE *fp;
_IO_off64_t offset;
int dir;
{
#ifdef _G_LSEEK64
return _G_LSEEK64 (fp->_fileno, offset, dir);
#else
return lseek (fp->_fileno, offset, dir);
#endif
}
int
_IO_file_stat (fp, st)
_IO_FILE *fp;
void *st;
{
#ifdef _G_FSTAT64
return _G_FSTAT64 (fp->_fileno, (struct _G_stat64 *) st);
#else
return fstat (fp->_fileno, (struct _G_stat64 *) st);
#endif
}
int
_IO_file_close (fp)
_IO_FILE *fp;
{
return close (fp->_fileno);
}
_IO_ssize_t
_IO_file_write (f, data, n)
_IO_FILE *f;
const void *data;
_IO_ssize_t n;
{
_IO_ssize_t to_do = n;
while (to_do > 0)
{
_IO_ssize_t count = write (f->_fileno, data, to_do);
if (count == EOF)
{
f->_flags |= _IO_ERR_SEEN;
break;
}
to_do -= count;
data = (void *) ((char *) data + count);
}
n -= to_do;
if (f->_offset >= 0)
f->_offset += n;
return n;
}
_IO_size_t
_IO_file_xsputn (f, data, n)
_IO_FILE *f;
const void *data;
_IO_size_t n;
{
register const char *s = (char *) data;
_IO_size_t to_do = n;
int must_flush = 0;
_IO_size_t count;
if (n <= 0)
return 0;
/* This is an optimized implementation.
If the amount to be written straddles a block boundary
(or the filebuf is unbuffered), use sys_write directly. */
/* First figure out how much space is available in the buffer. */
count = f->_IO_write_end - f->_IO_write_ptr; /* Space available. */
if ((f->_flags & _IO_LINE_BUF) && (f->_flags & _IO_CURRENTLY_PUTTING))
{
count = f->_IO_buf_end - f->_IO_write_ptr;
if (count >= n)
{
register const char *p;
for (p = s + n; p > s; )
{
if (*--p == '\n')
{
count = p - s + 1;
must_flush = 1;
break;
}
}
}
}
/* Then fill the buffer. */
if (count > 0)
{
if (count > to_do)
count = to_do;
if (count > 20)
{
#ifdef _LIBC
f->_IO_write_ptr = __mempcpy (f->_IO_write_ptr, s, count);
#else
memcpy (f->_IO_write_ptr, s, count);
f->_IO_write_ptr += count;
#endif
s += count;
}
else
{
register char *p = f->_IO_write_ptr;
register int i = (int) count;
while (--i >= 0)
*p++ = *s++;
f->_IO_write_ptr = p;
}
to_do -= count;
}
if (to_do + must_flush > 0)
{
_IO_size_t block_size, dont_write;
/* Next flush the (full) buffer. */
if (__overflow (f, EOF) == EOF)
return n - to_do;
/* Try to maintain alignment: write a whole number of blocks.
dont_write is what gets left over. */
block_size = f->_IO_buf_end - f->_IO_buf_base;
dont_write = block_size >= 128 ? to_do % block_size : 0;
count = to_do - dont_write;
if (_IO_do_write (f, s, count) == EOF)
return n - to_do;
to_do = dont_write;
/* Now write out the remainder. Normally, this will fit in the
buffer, but it's somewhat messier for line-buffered files,
so we let _IO_default_xsputn handle the general case. */
if (dont_write)
to_do -= _IO_default_xsputn (f, s+count, dont_write);
}
return n - to_do;
}
_IO_size_t
_IO_file_xsgetn (fp, data, n)
_IO_FILE *fp;
void *data;
_IO_size_t n;
{
register _IO_size_t want, have;
register _IO_ssize_t count;
register char *s = data;
want = n;
while (want > 0)
{
have = fp->_IO_read_end - fp->_IO_read_ptr;
if (want <= have)
{
memcpy (s, fp->_IO_read_ptr, want);
fp->_IO_read_ptr += want;
want = 0;
}
else
{
if (have > 0)
{
#ifdef _LIBC
s = __mempcpy (s, fp->_IO_read_ptr, have);
#else
memcpy (s, fp->_IO_read_ptr, have);
s += have;
#endif
want -= have;
fp->_IO_read_ptr += have;
}
/* Check for backup and repeat */
if (_IO_in_backup (fp))
{
_IO_switch_to_main_get_area (fp);
continue;
}
/* If we now want less than a buffer, underflow and repeat
the copy. Otherwise, _IO_SYSREAD directly to
the user buffer. */
if (fp->_IO_buf_base && want < fp->_IO_buf_end - fp->_IO_buf_base)
{
if (__underflow (fp) == EOF)
break;
continue;
}
/* These must be set before the sysread as we might longjmp out
waiting for input. */
_IO_setg (fp, fp->_IO_buf_base, fp->_IO_buf_base, fp->_IO_buf_base);
_IO_setp (fp, fp->_IO_buf_base, fp->_IO_buf_base);
/* Try to maintain alignment: read a whole number of blocks. */
count = want;
if (fp->_IO_buf_base)
{
_IO_size_t block_size = fp->_IO_buf_end - fp->_IO_buf_base;
if (block_size >= 128)
count -= want % block_size;
}
count = _IO_SYSREAD (fp, s, count);
if (count <= 0)
{
if (count == 0)
fp->_flags |= _IO_EOF_SEEN;
else
fp->_flags |= _IO_ERR_SEEN;
break;
}
s += count;
want -= count;
if (fp->_offset != _IO_pos_BAD)
_IO_pos_adjust (fp->_offset, count);
}
}
return n - want;
}
struct _IO_jump_t _IO_file_jumps =
{
JUMP_INIT_DUMMY,
JUMP_INIT(finish, _IO_file_finish),
JUMP_INIT(overflow, _IO_file_overflow),
JUMP_INIT(underflow, _IO_file_underflow),
JUMP_INIT(uflow, _IO_default_uflow),
JUMP_INIT(pbackfail, _IO_default_pbackfail),
JUMP_INIT(xsputn, _IO_file_xsputn),
JUMP_INIT(xsgetn, _IO_file_xsgetn),
JUMP_INIT(seekoff, _IO_file_seekoff),
JUMP_INIT(seekpos, _IO_default_seekpos),
JUMP_INIT(setbuf, _IO_file_setbuf),
JUMP_INIT(sync, _IO_file_sync),
JUMP_INIT(doallocate, _IO_file_doallocate),
JUMP_INIT(read, _IO_file_read),
JUMP_INIT(write, _IO_file_write),
JUMP_INIT(seek, _IO_file_seek),
JUMP_INIT(close, _IO_file_close),
JUMP_INIT(stat, _IO_file_stat),
JUMP_INIT(showmanyc, _IO_default_showmanyc),
JUMP_INIT(imbue, _IO_default_imbue)
};