glibc/sysdeps/unix/bsd/sun/sunos4/termbits.h
1995-02-18 01:27:10 +00:00

209 lines
7.1 KiB
C

/* termios type and macro definitions. SunOS 4 version.
Copyright (C) 1993, 1994 Free Software Foundation, Inc.
This file is part of the GNU C Library.
The GNU C Library is free software; you can redistribute it and/or
modify it under the terms of the GNU Library General Public License as
published by the Free Software Foundation; either version 2 of the
License, or (at your option) any later version.
The GNU C Library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
Library General Public License for more details.
You should have received a copy of the GNU Library General Public
License along with the GNU C Library; see the file COPYING.LIB. If
not, write to the Free Software Foundation, Inc., 675 Mass Ave,
Cambridge, MA 02139, USA. */
/* Type of terminal control flag masks. */
typedef unsigned long int tcflag_t;
/* Type of control characters. */
typedef unsigned char cc_t;
/* Type of baud rate specifiers. */
typedef unsigned int speed_t;
/* Terminal control structure. */
struct termios
{
/* Input modes. */
tcflag_t c_iflag;
#define IGNBRK 0x0001 /* Ignore break condition. */
#define BRKINT 0x0002 /* Signal interrupt on break. */
#define IGNPAR 0x0004 /* Ignore characters with parity errors. */
#define PARMRK 0x0008 /* Mark parity and framing errors. */
#define INPCK 0x0010 /* Enable input parity check. */
#define ISTRIP 0x0020 /* Strip 8th bit off characters. */
#define INLCR 0x0040 /* Map NL to CR on input. */
#define IGNCR 0x0080 /* Ignore CR. */
#define ICRNL 0x0100 /* Map CR to NL on input. */
#ifdef __USE_BSD
#define IUCLC 0x0200 /* Map upper case to lower case on input. */
#endif
#define IXON 0x0400 /* Enable start/stop output control. */
#define IXOFF 0x1000 /* Enable start/stop input control. */
#ifdef __USE_BSD
#define IXANY 0x0800 /* Any character will restart after stop. */
#define IMAXBEL 0x2000 /* Ring bell when input queue is full. */
#endif
/* Output modes. */
tcflag_t c_oflag;
#define OPOST 0x0001 /* Perform output processing. */
#ifdef __USE_BSD
#define OLCUC 0x00000002 /* Map lower case to upper case on output. */
#define ONLCR 0x00000004 /* Map NL to CR-NL on output. */
#define OCRNL 0x00000008
#define ONOCR 0x00000010
#define ONLRET 0x00000020
#define OFILL 0x00000040
#define OFDEL 0x00000080
#define NLDLY 0x00000100
#define NL0 0
#define NL1 0x00000100
#define CRDLY 0x00000600
#define CR0 0
#define CR1 0x00000200
#define CR2 0x00000400
#define CR3 0x00000600
#define TABDLY 0x00001800
#define TAB0 0
#define TAB1 0x00000800
#define TAB2 0x00001000
#define XTABS 0x00001800
#define TAB3 XTABS
#define BSDLY 0x00002000
#define BS0 0
#define BS1 0x00002000
#define VTDLY 0x00004000
#define VT0 0
#define VT1 0x00004000
#define FFDLY 0x00008000
#define FF0 0
#define FF1 0x00008000
#define PAGEOUT 0x00010000
#define WRAP 0x00020000
#endif
/* Control modes. */
tcflag_t c_cflag;
#define CSIZE (CS5|CS6|CS7|CS8) /* Number of bits per byte (mask). */
#define CS5 0 /* 5 bits per byte. */
#define CS6 0x00000010 /* 6 bits per byte. */
#define CS7 0x00000020 /* 7 bits per byte. */
#define CS8 0x00000030 /* 8 bits per byte. */
#define CSTOPB 0x00000040 /* Two stop bits instead of one. */
#define CREAD 0x00000080 /* Enable receiver. */
#define PARENB 0x00000100 /* Parity enable. */
#define PARODD 0x00000200 /* Odd parity instead of even. */
#define HUPCL 0x00000400 /* Hang up on last close. */
#define CLOCAL 0x00000800 /* Ignore modem status lines. */
#ifdef __USE_BSD
#define LOBLK 0x00001000
#define CRTSCTS 0x80000000
#define CIBAUD 0x000f0000 /* Mask for input speed from c_cflag. */
#define CBAUD 0x0000000f /* Mask for output speed from c_cflag. */
#define IBSHIFT 16 /* Bits to shift for input speed. */
#endif
/* Input and output baud rates. These are encoded in c_cflag. */
#define B0 0
#define B50 1
#define B75 2
#define B110 3
#define B134 4
#define B150 5
#define B200 6
#define B300 7
#define B600 8
#define B1200 9
#define B1800 10
#define B2400 11
#define B4800 12
#define B9600 13
#define B19200 14
#define B38400 15
#ifdef __USE_BSD
#define EXTA 14
#define EXTB 15
#endif
/* Local modes. */
tcflag_t c_lflag;
#ifdef __USE_BSD
#define ECHOKE 0x00000800 /* Visual erase for KILL. */
#endif
#define ECHOE 0x00000010 /* Visual erase for ERASE. */
#define ECHOK 0x00000020 /* Echo NL after KILL. */
#define ECHO 0x00000008 /* Enable echo. */
#define ECHONL 0x00000040 /* Echo NL even if ECHO is off. */
#ifdef __USE_BSD
#define ECHOPRT 0x00000400 /* Hardcopy visual erase. */
#define ECHOCTL 0x00000200 /* Echo control characters as ^X. */
#endif
#define ISIG 0x00000001 /* Enable signals. */
#define ICANON 0x00000002 /* Do erase and kill processing. */
#define IEXTEN 0x00008000 /* Enable DISCARD and LNEXT. */
#define TOSTOP 0x00000100 /* Send SIGTTOU for background output. */
#ifdef __USE_BSD
#define PENDIN 0x00004000 /* Retype pending input (state). */
#endif
#define NOFLSH 0x00000080 /* Disable flush after interrupt. */
char c_line; /* Line discipline (?) */
/* Control characters. */
#define VEOF 4 /* End-of-file character [ICANON]. */
#define VEOL 5 /* End-of-line character [ICANON]. */
#ifdef __USE_BSD
#define VEOL2 6 /* Second EOL character [ICANON]. */
#define VSWTCH 7 /* ??? */
#endif
#define VERASE 2 /* Erase character [ICANON]. */
#ifdef __USE_BSD
#define VWERASE 14 /* Word-erase character [ICANON]. */
#endif
#define VKILL 3 /* Kill-line character [ICANON]. */
#ifdef __USE_BSD
#define VREPRINT 12 /* Reprint-line character [ICANON]. */
#endif
#define VINTR 0 /* Interrupt character [ISIG]. */
#define VQUIT 1 /* Quit character [ISIG]. */
#define VSUSP 10 /* Suspend character [ISIG]. */
#ifdef __USE_BSD
#define VDSUSP 11 /* Delayed suspend character [ISIG]. */
#endif
#define VSTART 8 /* Start (X-ON) character [IXON, IXOFF]. */
#define VSTOP 9 /* Stop (X-OFF) character [IXON, IXOFF]. */
#ifdef __USE_BSD
#define VLNEXT 15 /* Literal-next character [IEXTEN]. */
#define VDISCARD 13 /* Discard character [IEXTEN]. */
#endif
#define VMIN VEOF /* Minimum number of bytes read at once [!ICANON]. */
#define VTIME VEOL /* Time-out value (tenths of a second) [!ICANON]. */
#define NCCS 17
cc_t c_cc[NCCS];
};
#define _IOT_termios /* Hurd ioctl type field. */ \
_IOT (_IOTS (cflag_t), 4, _IOTS (cc_t), NCCS, _IOTS (speed_t), 2)
/* Values for the OPTIONAL_ACTIONS argument to `tcsetattr'. */
#define TCSANOW 0 /* Change immediately. */
#define TCSADRAIN 1 /* Change when pending output is written. */
#define TCSAFLUSH 2 /* Flush pending input before changing. */
/* Values for the QUEUE_SELECTOR argument to `tcflush'. */
#define TCIFLUSH 0 /* Discard data received but not yet read. */
#define TCOFLUSH 1 /* Discard data written but not yet sent. */
#define TCIOFLUSH 2 /* Discard all pending data. */
/* Values for the ACTION argument to `tcflow'. */
#define TCOOFF 0 /* Suspend output. */
#define TCOON 1 /* Restart suspended output. */
#define TCIOFF 2 /* Send a STOP character. */
#define TCION 3 /* Send a START character. */