glibc/sysdeps/ia64/memset.S
Ulrich Drepper 85dd100310 Update.
* sysdeps/i386/fpu/ftestexcept.c: Also check SSE status word.

	* include/signal.h: Use libc_hidden_proto for sigaddset and sigdelset.
	* signal/sigaddset.c: Add libc_hidden_def.
	* signal/sigdelset.c: Likewise.

2003-04-29  Jakub Jelinek  <jakub@redhat.com>

	* sysdeps/i386/i486/string-inlines.c (__memcpy_g, __strchr_g): Move
	to the end of the file.

	* configure.in: Change __oline__ to $LINENO.
	(HAVE_BUILTIN_REDIRECTION): New check.
	* config.h.in (HAVE_BUILTIN_REDIRECTION): Add.
	* include/libc-symbols.h (libc_hidden_builtin_proto,
	libc_hidden_builtin_def, libc_hidden_builtin_weak,
	libc_hidden_builtin_ver): Define.
	* include/string.h (memchr, memcpy, memmove, memset, strcat, strchr,
	strcmp, strcpy, strcspn, strlen, strncmp, strncpy, strpbrk, strrchr,
	strspn, strstr): Add libc_hidden_builtin_proto.
	* intl/plural.y: Include string.h.
	* sysdeps/alpha/alphaev6/memchr.S (memchr): Add
	libc_hidden_builtin_def.
	* sysdeps/alpha/alphaev6/memcpy.S (memcpy): Likewise.
	* sysdeps/alpha/alphaev6/memset.S (memset): Likewise.
	* sysdeps/alpha/alphaev67/strcat.S (strcat): Likewise.
	* sysdeps/alpha/alphaev67/strchr.S (strchr): Likewise.
	* sysdeps/alpha/alphaev67/strlen.S (strlen): Likewise.
	* sysdeps/alpha/alphaev67/strrchr.S (strrchr): Likewise.
	* sysdeps/alpha/memchr.S (memchr): Likewise.
	* sysdeps/alpha/memset.S (memset): Likewise.
	* sysdeps/alpha/strcat.S (strcat): Likewise.
	* sysdeps/alpha/strchr.S (strchr): Likewise.
	* sysdeps/alpha/strcmp.S (strcmp): Likewise.
	* sysdeps/alpha/strcpy.S (strcpy): Likewise.
	* sysdeps/alpha/strlen.S (strlen): Likewise.
	* sysdeps/alpha/strncmp.S (strncmp): Likewise.
	* sysdeps/alpha/strncpy.S (strncpy): Likewise.
	* sysdeps/alpha/strrchr.S (strrchr): Likewise.
	* sysdeps/arm/memset.S (memset): Likewise.
	* sysdeps/arm/strlen.S (strlen): Likewise.
	* sysdeps/generic/memchr.c (memchr): Likewise.
	* sysdeps/generic/memcpy.c (memcpy): Likewise.
	* sysdeps/generic/memmove.c (memmove): Likewise.
	* sysdeps/generic/memset.c (memset): Likewise.
	* sysdeps/generic/strcat.c (strcat): Likewise.
	* sysdeps/generic/strchr.c (strchr): Likewise.
	* sysdeps/generic/strcmp.c (strcmp): Likewise.
	* sysdeps/generic/strcpy.c (strcpy): Likewise.
	* sysdeps/generic/strcspn.c (strcspn): Likewise.
	* sysdeps/generic/strlen.c (strlen): Likewise.
	* sysdeps/generic/strncmp.c (strncmp): Likewise.
	* sysdeps/generic/strncpy.c (strncpy): Likewise.
	* sysdeps/generic/strpbrk.c (strpbrk): Likewise.
	* sysdeps/generic/strrchr.c (strrchr): Likewise.
	* sysdeps/generic/strspn.c (strspn): Likewise.
	* sysdeps/generic/strstr.c (strstr): Likewise.
	* sysdeps/i386/i486/strcat.S (strcat): Likewise.
	* sysdeps/i386/i486/strlen.S (strlen): Likewise.
	* sysdeps/i386/i586/memcpy.S (memcpy): Likewise.
	* sysdeps/i386/i586/memset.S (memset): Likewise.
	* sysdeps/i386/i586/strchr.S (strchr): Likewise.
	* sysdeps/i386/i586/strcpy.S (strcpy): Likewise.
	* sysdeps/i386/i586/strlen.S (strlen): Likewise.
	* sysdeps/i386/i686/memcpy.S (memcpy): Likewise.
	* sysdeps/i386/i686/memmove.S (memmove): Likewise.
	* sysdeps/i386/i686/memset.S (memset): Likewise.
	* sysdeps/i386/i686/strcmp.S (strcmp): Likewise.
	* sysdeps/i386/memchr.S (memchr): Likewise.
	* sysdeps/i386/memset.c (memset): Likewise.
	* sysdeps/i386/strchr.S (strchr): Likewise.
	* sysdeps/i386/strcspn.S (strcspn): Likewise.
	* sysdeps/i386/strlen.c (strlen): Likewise.
	* sysdeps/i386/strpbrk.S (strpbrk): Likewise.
	* sysdeps/i386/strrchr.S (strrchr): Likewise.
	* sysdeps/i386/strspn.S (strspn): Likewise.
	* sysdeps/ia64/memchr.S (memchr): Likewise.
	* sysdeps/ia64/memcpy.S (memcpy): Likewise.
	* sysdeps/ia64/memmove.S (memmove): Likewise.
	* sysdeps/ia64/memset.S (memset): Likewise.
	* sysdeps/ia64/strcat.S (strcat): Likewise.
	* sysdeps/ia64/strchr.S (strchr): Likewise.
	* sysdeps/ia64/strcmp.S (strcmp): Likewise.
	* sysdeps/ia64/strcpy.S (strcpy): Likewise.
	* sysdeps/ia64/strlen.S (strlen): Likewise.
	* sysdeps/ia64/strncmp.S (strncmp): Likewise.
	* sysdeps/ia64/strncpy.S (strncpy): Likewise.
	* sysdeps/m68k/memchr.S (memchr): Likewise.
	* sysdeps/m68k/strchr.S (strchr): Likewise.
	* sysdeps/mips/mips64/memcpy.S (memcpy): Likewise.
	* sysdeps/mips/mips64/memset.S (memset): Likewise.
	* sysdeps/mips/memcpy.S (memcpy): Likewise.
	* sysdeps/mips/memset.S (memset): Likewise.
	* sysdeps/powerpc/powerpc32/memset.S (memset): Likewise.
	* sysdeps/powerpc/powerpc32/strchr.S (strchr): Likewise.
	* sysdeps/powerpc/powerpc32/strcmp.S (strcmp): Likewise.
	* sysdeps/powerpc/powerpc32/strcpy.S (strcpy): Likewise.
	* sysdeps/powerpc/powerpc32/strlen.S (strlen): Likewise.
	* sysdeps/powerpc/powerpc64/memcpy.S (memcpy): Likewise.
	* sysdeps/powerpc/powerpc64/memset.S (memset): Likewise.
	* sysdeps/powerpc/powerpc64/strchr.S (strchr): Likewise.
	* sysdeps/powerpc/powerpc64/strcmp.S (strcmp): Likewise.
	* sysdeps/powerpc/powerpc64/strcpy.S (strcpy): Likewise.
	* sysdeps/powerpc/powerpc64/strlen.S (strlen): Likewise.
	* sysdeps/powerpc/strcat.c (strcat): Likewise.
	* sysdeps/sparc/sparc32/memchr.S (memchr): Likewise.
	* sysdeps/sparc/sparc32/memcpy.S (memcpy): Likewise.
	* sysdeps/sparc/sparc32/memset.S (memset): Likewise.
	* sysdeps/sparc/sparc32/strcat.S (strcat): Likewise.
	* sysdeps/sparc/sparc32/strchr.S (strchr, strrchr): Likewise.
	* sysdeps/sparc/sparc32/strcmp.S (strcmp): Likewise.
	* sysdeps/sparc/sparc32/strcpy.S (strcpy): Likewise.
	* sysdeps/sparc/sparc32/strlen.S (strlen): Likewise.
	* sysdeps/sparc/sparc64/sparcv9b/memcpy.S (memcpy, memmove): Likewise.
	* sysdeps/sparc/sparc64/memchr.S (memchr): Likewise.
	* sysdeps/sparc/sparc64/memcpy.S (memcpy, memmove): Likewise.
	* sysdeps/sparc/sparc64/memset.S (memset): Likewise.
	* sysdeps/sparc/sparc64/strcat.S (strcat): Likewise.
	* sysdeps/sparc/sparc64/strchr.S (strchr, strrchr): Likewise.
	* sysdeps/sparc/sparc64/strcmp.S (strcmp): Likewise.
	* sysdeps/sparc/sparc64/strcpy.S (strcpy): Likewise.
	* sysdeps/sparc/sparc64/strcspn.S (strcspn): Likewise.
	* sysdeps/sparc/sparc64/strlen.S (strlen): Likewise.
	* sysdeps/sparc/sparc64/strncmp.S (strncmp): Likewise.
	* sysdeps/sparc/sparc64/strncpy.S (strncpy): Likewise.
	* sysdeps/sparc/sparc64/strpbrk.S (strpbrk): Likewise.
	* sysdeps/sparc/sparc64/strspn.S (strspn): Likewise.
	* sysdeps/sh/memcpy.S (memcpy): Likewise.
	* sysdeps/sh/memset.S (memset): Likewise.
	* sysdeps/sh/strlen.S (strlen): Likewise.
	* sysdeps/s390/s390-32/memchr.S (memchr): Likewise.
	* sysdeps/s390/s390-32/memcpy.S (memcpy): Likewise.
	* sysdeps/s390/s390-32/memset.S (memset): Likewise.
	* sysdeps/s390/s390-32/strcmp.S (strcmp): Likewise.
	* sysdeps/s390/s390-32/strcpy.S (strcpy): Likewise.
	* sysdeps/s390/s390-32/strncpy.S (strncpy): Likewise.
	* sysdeps/s390/s390-64/memchr.S (memchr): Likewise.
	* sysdeps/s390/s390-64/memcpy.S (memcpy): Likewise.
	* sysdeps/s390/s390-64/memset.S (memset): Likewise.
	* sysdeps/s390/s390-64/strcmp.S (strcmp): Likewise.
	* sysdeps/s390/s390-64/strcpy.S (strcpy): Likewise.
	* sysdeps/s390/s390-64/strncpy.S (strncpy): Likewise.
	* sysdeps/x86_64/memcpy.S (memcpy): Likewise.
	* sysdeps/x86_64/memset.S (memset): Likewise.
	* sysdeps/x86_64/strcat.S (strcat): Likewise.
	* sysdeps/x86_64/strchr.S (strchr): Likewise.
	* sysdeps/x86_64/strcmp.S (strcmp): Likewise.
	* sysdeps/x86_64/strcpy.S (strcpy): Likewise.
	* sysdeps/x86_64/strcspn.S (strcspn): Likewise.
	* sysdeps/x86_64/strlen.S (strlen): Likewise.
	* sysdeps/x86_64/strspn.S (strspn): Likewise.
	* string/string-inlines.c: Move...
	* sysdeps/generic/string-inlines.c: ...here.
	(__memcpy_g, __strchr_g): Remove.
	(__NO_INLINE__): Define before including <string.h>,
	undefine after.  Include bits/string.h and bits/string2.h.
	* sysdeps/i386/i486/string-inlines.c: New file.
	* sysdeps/i386/string-inlines.c: New file.
	* sysdeps/i386/i486/Versions: Remove.
	All GLIBC_2.1.1 symbols moved...
	* sysdeps/i386/Versions (libc): ...here.

2003-04-29  Ulrich Drepper  <drepper@redhat.com>
2003-04-29 22:49:58 +00:00

393 lines
10 KiB
ArmAsm

/* Optimized version of the standard memset() function.
This file is part of the GNU C Library.
Copyright (C) 2000, 2001, 2002, 2003 Free Software Foundation, Inc.
Contributed by Dan Pop for Itanium <Dan.Pop@cern.ch>.
Rewritten for McKinley by Sverre Jarp, HP Labs/CERN <Sverre.Jarp@cern.ch>
The GNU C Library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
The GNU C Library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public
License along with the GNU C Library; if not, write to the Free
Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
02111-1307 USA. */
/* Return: dest
Inputs:
in0: dest
in1: value
in2: count
The algorithm is fairly straightforward: set byte by byte until we
we get to a 16B-aligned address, then loop on 128 B chunks using an
early store as prefetching, then loop on 32B chucks, then clear remaining
words, finally clear remaining bytes.
Since a stf.spill f0 can store 16B in one go, we use this instruction
to get peak speed when value = 0. */
#include <sysdep.h>
#undef ret
#define dest in0
#define value in1
#define cnt in2
#define tmp r31
#define save_lc r30
#define ptr0 r29
#define ptr1 r28
#define ptr2 r27
#define ptr3 r26
#define ptr9 r24
#define loopcnt r23
#define linecnt r22
#define bytecnt r21
#define fvalue f6
// This routine uses only scratch predicate registers (p6 - p15)
#define p_scr p6 // default register for same-cycle branches
#define p_nz p7
#define p_zr p8
#define p_unalgn p9
#define p_y p11
#define p_n p12
#define p_yy p13
#define p_nn p14
#define movi0 mov
#define MIN1 15
#define MIN1P1HALF 8
#define LINE_SIZE 128
#define LSIZE_SH 7 // shift amount
#define PREF_AHEAD 8
#define USE_FLP
#if defined(USE_INT)
#define store st8
#define myval value
#elif defined(USE_FLP)
#define store stf8
#define myval fvalue
#endif
.align 64
ENTRY(memset)
{ .mmi
.prologue
alloc tmp = ar.pfs, 3, 0, 0, 0
lfetch.nt1 [dest]
.save ar.lc, save_lc
movi0 save_lc = ar.lc
} { .mmi
.body
mov ret0 = dest // return value
cmp.ne p_nz, p_zr = value, r0 // use stf.spill if value is zero
cmp.eq p_scr, p0 = cnt, r0
;; }
{ .mmi
and ptr2 = -(MIN1+1), dest // aligned address
and tmp = MIN1, dest // prepare to check for alignment
tbit.nz p_y, p_n = dest, 0 // Do we have an odd address? (M_B_U)
} { .mib
mov ptr1 = dest
mux1 value = value, @brcst // create 8 identical bytes in word
(p_scr) br.ret.dpnt.many rp // return immediately if count = 0
;; }
{ .mib
cmp.ne p_unalgn, p0 = tmp, r0
} { .mib // NB: # of bytes to move is 1 higher
sub bytecnt = (MIN1+1), tmp // than loopcnt
cmp.gt p_scr, p0 = 16, cnt // is it a minimalistic task?
(p_scr) br.cond.dptk.many .move_bytes_unaligned // go move just a few (M_B_U)
;; }
{ .mmi
(p_unalgn) add ptr1 = (MIN1+1), ptr2 // after alignment
(p_unalgn) add ptr2 = MIN1P1HALF, ptr2 // after alignment
(p_unalgn) tbit.nz.unc p_y, p_n = bytecnt, 3 // should we do a st8 ?
;; }
{ .mib
(p_y) add cnt = -8, cnt
(p_unalgn) tbit.nz.unc p_yy, p_nn = bytecnt, 2 // should we do a st4 ?
} { .mib
(p_y) st8 [ptr2] = value, -4
(p_n) add ptr2 = 4, ptr2
;; }
{ .mib
(p_yy) add cnt = -4, cnt
(p_unalgn) tbit.nz.unc p_y, p_n = bytecnt, 1 // should we do a st2 ?
} { .mib
(p_yy) st4 [ptr2] = value, -2
(p_nn) add ptr2 = 2, ptr2
;; }
{ .mmi
mov tmp = LINE_SIZE+1 // for compare
(p_y) add cnt = -2, cnt
(p_unalgn) tbit.nz.unc p_yy, p_nn = bytecnt, 0 // should we do a st1 ?
} { .mmi
setf.sig fvalue=value // transfer value to FLP side
(p_y) st2 [ptr2] = value, -1
(p_n) add ptr2 = 1, ptr2
;; }
{ .mmi
(p_yy) st1 [ptr2] = value
cmp.gt p_scr, p0 = tmp, cnt // is it a minimalistic task?
} { .mbb
(p_yy) add cnt = -1, cnt
(p_scr) br.cond.dpnt.many .fraction_of_line // go move just a few
;; }
{ .mib
nop.m 0
shr.u linecnt = cnt, LSIZE_SH
(p_zr) br.cond.dptk.many .l1b // Jump to use stf.spill
;; }
.align 32 // -------- // L1A: store ahead into cache lines; fill later
{ .mmi
and tmp = -(LINE_SIZE), cnt // compute end of range
mov ptr9 = ptr1 // used for prefetching
and cnt = (LINE_SIZE-1), cnt // remainder
} { .mmi
mov loopcnt = PREF_AHEAD-1 // default prefetch loop
cmp.gt p_scr, p0 = PREF_AHEAD, linecnt // check against actual value
;; }
{ .mmi
(p_scr) add loopcnt = -1, linecnt // start of stores
add ptr2 = 8, ptr1 // (beyond prefetch stores)
add ptr1 = tmp, ptr1 // first address beyond total
;; } // range
{ .mmi
add tmp = -1, linecnt // next loop count
movi0 ar.lc = loopcnt
;; }
.pref_l1a:
{ .mib
store [ptr9] = myval, 128 // Do stores one cache line apart
nop.i 0
br.cloop.dptk.few .pref_l1a
;; }
{ .mmi
add ptr0 = 16, ptr2 // Two stores in parallel
movi0 ar.lc = tmp
;; }
.l1ax:
{ .mmi
store [ptr2] = myval, 8
store [ptr0] = myval, 8
;; }
{ .mmi
store [ptr2] = myval, 24
store [ptr0] = myval, 24
;; }
{ .mmi
store [ptr2] = myval, 8
store [ptr0] = myval, 8
;; }
{ .mmi
store [ptr2] = myval, 24
store [ptr0] = myval, 24
;; }
{ .mmi
store [ptr2] = myval, 8
store [ptr0] = myval, 8
;; }
{ .mmi
store [ptr2] = myval, 24
store [ptr0] = myval, 24
;; }
{ .mmi
store [ptr2] = myval, 8
store [ptr0] = myval, 32
cmp.lt p_scr, p0 = ptr9, ptr1 // do we need more prefetching?
;; }
{ .mmb
store [ptr2] = myval, 24
(p_scr) store [ptr9] = myval, 128
br.cloop.dptk.few .l1ax
;; }
{ .mbb
cmp.le p_scr, p0 = 8, cnt // just a few bytes left ?
(p_scr) br.cond.dpnt.many .fraction_of_line // Branch no. 2
br.cond.dpnt.many .move_bytes_from_alignment // Branch no. 3
;; }
.align 32
.l1b: // ------------------ // L1B: store ahead into cache lines; fill later
{ .mmi
and tmp = -(LINE_SIZE), cnt // compute end of range
mov ptr9 = ptr1 // used for prefetching
and cnt = (LINE_SIZE-1), cnt // remainder
} { .mmi
mov loopcnt = PREF_AHEAD-1 // default prefetch loop
cmp.gt p_scr, p0 = PREF_AHEAD, linecnt // check against actual value
;; }
{ .mmi
(p_scr) add loopcnt = -1, linecnt
add ptr2 = 16, ptr1 // start of stores (beyond prefetch stores)
add ptr1 = tmp, ptr1 // first address beyond total range
;; }
{ .mmi
add tmp = -1, linecnt // next loop count
movi0 ar.lc = loopcnt
;; }
.pref_l1b:
{ .mib
stf.spill [ptr9] = f0, 128 // Do stores one cache line apart
nop.i 0
br.cloop.dptk.few .pref_l1b
;; }
{ .mmi
add ptr0 = 16, ptr2 // Two stores in parallel
movi0 ar.lc = tmp
;; }
.l1bx:
{ .mmi
stf.spill [ptr2] = f0, 32
stf.spill [ptr0] = f0, 32
;; }
{ .mmi
stf.spill [ptr2] = f0, 32
stf.spill [ptr0] = f0, 32
;; }
{ .mmi
stf.spill [ptr2] = f0, 32
stf.spill [ptr0] = f0, 64
cmp.lt p_scr, p0 = ptr9, ptr1 // do we need more prefetching?
;; }
{ .mmb
stf.spill [ptr2] = f0, 32
(p_scr) stf.spill [ptr9] = f0, 128
br.cloop.dptk.few .l1bx
;; }
{ .mib
cmp.gt p_scr, p0 = 8, cnt // just a few bytes left ?
(p_scr) br.cond.dpnt.many .move_bytes_from_alignment
;; }
.fraction_of_line:
{ .mib
add ptr2 = 16, ptr1
shr.u loopcnt = cnt, 5 // loopcnt = cnt / 32
;; }
{ .mib
cmp.eq p_scr, p0 = loopcnt, r0
add loopcnt = -1, loopcnt
(p_scr) br.cond.dpnt.many .store_words
;; }
{ .mib
and cnt = 0x1f, cnt // compute the remaining cnt
movi0 ar.lc = loopcnt
;; }
.align 32
.l2: // ---------------------------- // L2A: store 32B in 2 cycles
{ .mmb
store [ptr1] = myval, 8
store [ptr2] = myval, 8
;; } { .mmb
store [ptr1] = myval, 24
store [ptr2] = myval, 24
br.cloop.dptk.many .l2
;; }
.store_words:
{ .mib
cmp.gt p_scr, p0 = 8, cnt // just a few bytes left ?
(p_scr) br.cond.dpnt.many .move_bytes_from_alignment // Branch
;; }
{ .mmi
store [ptr1] = myval, 8 // store
cmp.le p_y, p_n = 16, cnt //
add cnt = -8, cnt // subtract
;; }
{ .mmi
(p_y) store [ptr1] = myval, 8 // store
(p_y) cmp.le.unc p_yy, p_nn = 16, cnt //
(p_y) add cnt = -8, cnt // subtract
;; }
{ .mmi // store
(p_yy) store [ptr1] = myval, 8 //
(p_yy) add cnt = -8, cnt // subtract
;; }
.move_bytes_from_alignment:
{ .mib
cmp.eq p_scr, p0 = cnt, r0
tbit.nz.unc p_y, p0 = cnt, 2 // should we terminate with a st4 ?
(p_scr) br.cond.dpnt.few .restore_and_exit
;; }
{ .mib
(p_y) st4 [ptr1] = value, 4
tbit.nz.unc p_yy, p0 = cnt, 1 // should we terminate with a st2 ?
;; }
{ .mib
(p_yy) st2 [ptr1] = value, 2
tbit.nz.unc p_y, p0 = cnt, 0
;; }
{ .mib
(p_y) st1 [ptr1] = value
;; }
.restore_and_exit:
{ .mib
nop.m 0
movi0 ar.lc = save_lc
br.ret.sptk.many rp
;; }
.move_bytes_unaligned:
{ .mmi
.pred.rel "mutex",p_y, p_n
.pred.rel "mutex",p_yy, p_nn
(p_n) cmp.le p_yy, p_nn = 4, cnt
(p_y) cmp.le p_yy, p_nn = 5, cnt
(p_n) add ptr2 = 2, ptr1
} { .mmi
(p_y) add ptr2 = 3, ptr1
(p_y) st1 [ptr1] = value, 1 // fill 1 (odd-aligned) byte
(p_y) add cnt = -1, cnt // [15, 14 (or less) left]
;; }
{ .mmi
(p_yy) cmp.le.unc p_y, p0 = 8, cnt
add ptr3 = ptr1, cnt // prepare last store
movi0 ar.lc = save_lc
} { .mmi
(p_yy) st2 [ptr1] = value, 4 // fill 2 (aligned) bytes
(p_yy) st2 [ptr2] = value, 4 // fill 2 (aligned) bytes
(p_yy) add cnt = -4, cnt // [11, 10 (o less) left]
;; }
{ .mmi
(p_y) cmp.le.unc p_yy, p0 = 8, cnt
add ptr3 = -1, ptr3 // last store
tbit.nz p_scr, p0 = cnt, 1 // will there be a st2 at the end ?
} { .mmi
(p_y) st2 [ptr1] = value, 4 // fill 2 (aligned) bytes
(p_y) st2 [ptr2] = value, 4 // fill 2 (aligned) bytes
(p_y) add cnt = -4, cnt // [7, 6 (or less) left]
;; }
{ .mmi
(p_yy) st2 [ptr1] = value, 4 // fill 2 (aligned) bytes
(p_yy) st2 [ptr2] = value, 4 // fill 2 (aligned) bytes
// [3, 2 (or less) left]
tbit.nz p_y, p0 = cnt, 0 // will there be a st1 at the end ?
} { .mmi
(p_yy) add cnt = -4, cnt
;; }
{ .mmb
(p_scr) st2 [ptr1] = value // fill 2 (aligned) bytes
(p_y) st1 [ptr3] = value // fill last byte (using ptr3)
br.ret.sptk.many rp
;; }
END(memset)
libc_hidden_builtin_def (memset)