glibc/Makeconfig
Carlos O'Donell 314f6deec9 Enable --localedir to set message catalog directory (Bug 14259)
In 1999 the project split "localedir" into "localedir" (path to compiled
locale archives) and "msgcatdir" (path to message catalogs). This
predates the 2002 change in the GNU Coding Standard to document the use
of "localedir" for the path to the message catalogs. It appears that
newlib, gcc, and several other projects also used "msgcatdir" at one
point or another in the past, and so it is in line with historical
precedent that glibc would also use "msgcatdir." However, given that the
GNU Coding Standard uses "localedir", we will switch to that for
consistency as a GNU project. Previous uses of --localdir didn't work
anyway (see bug 14259).

I am committing this patch in the understanding that nobody would object
to fixing #14259 as part of aligning our variable usage to the GNU
Coding Standard.

Given that previous "localedir" uses were converted to "complocaledir"
by [1], we can now convert "msgcatdir" to "localedir" and complete the
transition. With an addition to config.make.in we also fix bug 14259 and
allow users to specify the locale dependent data directory with
"--localedir" at configure time. There is still no way to control at
configure time the location of the *compiled* locale directory.

Tested on x86_64 with no regressions.

Tested using "--localedir" to specify alternate locale dependent data
directory and verified with "make install DESTDIR=/tmp/glibc".

[1] 90fe682d30
2016-02-24 20:06:04 -05:00

1165 lines
41 KiB
Plaintext
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

# Copyright (C) 1991-2016 Free Software Foundation, Inc.
# This file is part of the GNU C Library.
# The GNU C Library is free software; you can redistribute it and/or
# modify it under the terms of the GNU Lesser General Public
# License as published by the Free Software Foundation; either
# version 2.1 of the License, or (at your option) any later version.
# The GNU C Library is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# Lesser General Public License for more details.
# You should have received a copy of the GNU Lesser General Public
# License along with the GNU C Library; if not, see
# <http://www.gnu.org/licenses/>.
#
# Makefile configuration options for the GNU C library.
#
ifneq (,)
This makefile requires GNU Make.
endif
all: # Make this the default goal
ifneq "$(origin +included-Makeconfig)" "file"
+included-Makeconfig := yes
ifdef subdir
.. := ../
endif
# $(common-objdir) is the place to put objects and
# such that are not specific to a single subdir.
ifdef objdir
objpfx := $(patsubst %//,%/,$(objdir)/$(subdir)/)
common-objpfx = $(objdir)/
common-objdir = $(objdir)
else
objdir must be defined by the build-directory Makefile.
endif
# Root of the sysdeps tree.
sysdep_dir := $(..)sysdeps
export sysdep_dir := $(sysdep_dir)
# Get the values defined by options to `configure'.
include $(common-objpfx)config.make
# What flags to give to sources which call user provided callbacks
uses-callbacks = -fexceptions
# What flags to give to tests which test stack alignment
stack-align-test-flags =
# Complete path to sysdep dirs.
# `configure' writes a definition of `config-sysdirs' in `config.make'.
sysdirs := $(foreach D,$(config-sysdirs),$(firstword $(filter /%,$D) $(..)$D))
# Add-ons that contribute sysdeps trees get added to the include list
# after sysdeps/generic. This makes #include <sysdeps/...> work right
# to find specific add-on files without assuming the add-on directory name.
# It also means that headers can go into an add-on's base directory
# instead of the add-on needing a sysdeps/generic of its own.
sysdeps-srcdirs := $(foreach add-on,$(sysdeps-add-ons),\
$(firstword $(filter /%,$(add-on)) \
$(..)$(add-on)))
+sysdep_dirs = $(sysdirs) $(sysdeps-srcdirs)
ifdef objdir
+sysdep_dirs := $(objdir) $(+sysdep_dirs)
endif
# Run config.status to update config.make and config.h. We don't show the
# dependence of config.h to Make, because it is only touched when it
# changes and so config.status would be run every time; the dependence of
# config.make should suffice to force regeneration and re-exec, and the new
# image will notice if config.h changed.
$(common-objpfx)config.make: $(common-objpfx)config.status \
$(..)config.make.in $(..)config.h.in
cd $(<D); $(SHELL) $(<F)
# Find all the add-on and sysdeps configure fragments, to make sure we
# re-run configure when any of them changes.
$(common-objpfx)config.status: $(..)version.h $(..)configure \
$(foreach dir,$(sysdirs),\
$(wildcard $(dir)/Implies) \
$(patsubst %.ac,%,\
$(firstword $(wildcard \
$(addprefix $(dir)/,configure configure.ac))))) \
$(patsubst %.ac,%,\
$(wildcard $(..)sysdeps/*/preconfigure $(..)sysdeps/*/preconfigure.ac)) \
$(patsubst %.ac,%,\
$(foreach add-on,$(add-ons),\
$(firstword $(wildcard \
$(addprefix $(firstword $(filter /%,$(add-on)) $(..)$(add-on))/,\
configure configure.ac))) \
$(wildcard $(addprefix $(firstword $(filter /%,$(add-on)) $(..)$(add-on))/,\
sysdeps/*/preconfigure sysdeps/*/preconfigure.ac))))
@cd $(@D); if test -f $(@F); then exec $(SHELL) $(@F) --recheck; else \
echo The GNU C library has not been configured. >&2; \
echo Run \`configure\' to configure it before building. >&2; \
echo Try \`configure --help\' for more details. >&2; \
exit 1; fi
# We don't want CPPFLAGS to be exported to the command running configure.
unexport CPPFLAGS
# Get the user's configuration parameters.
ifneq ($(wildcard $(..)configparms),)
include $(..)configparms
endif
ifneq ($(objpfx),)
ifneq ($(wildcard $(common-objpfx)configparms),)
include $(common-objpfx)configparms
endif
endif
####
#### These are the configuration variables. You can define values for
#### the variables below in the file `configparms'.
#### Do NOT edit this file.
####
# Common prefix for machine-independent installation directories.
ifeq ($(origin prefix),undefined) # ifndef would override explicit empty value.
prefix = /usr/local
endif
# Decide whether we shall build the programs or not. We always do this
# unless the user tells us (in configparms) or we are building for a
# standalone target.
ifndef build-programs
ifneq ($(config-os),none)
build-programs=yes
else
build-programs=no
endif
endif
# Common prefix for machine-dependent installation directories.
ifeq ($(origin exec_prefix),undefined)
exec_prefix = $(prefix)
endif
# Where to install the library and object files.
ifndef libdir
libdir = $(exec_prefix)/lib
endif
inst_libdir = $(install_root)$(libdir)
# Where to install the shared library.
ifndef slibdir
slibdir = $(exec_prefix)/lib
endif
inst_slibdir = $(install_root)$(slibdir)
# Where to install the dynamic linker.
ifndef rtlddir
rtlddir = $(slibdir)
endif
inst_rtlddir = $(install_root)$(rtlddir)
# Prefix to put on files installed in $(libdir). For libraries `libNAME.a',
# the prefix is spliced between `lib' and the name, so the linker switch
# `-l$(libprefix)NAME' finds the library; for other files the prefix is
# just prepended to the whole file name.
ifeq ($(origin libprefix),undefined)
libprefix =
endif
# Where to install the header files.
ifndef includedir
includedir = $(prefix)/include
endif
inst_includedir = $(install_root)$(includedir)
# Where to install machine-independent data files.
# These are the timezone database, and the locale database.
ifndef datadir
datadir = $(prefix)/share
endif
inst_datadir = $(install_root)$(datadir)
# Where to install the timezone data files (which are machine-independent).
ifndef zonedir
zonedir = $(datadir)/zoneinfo
endif
inst_zonedir = $(install_root)$(zonedir)
# Where to install the compiled binary locale archive and compiled
# binary locale files.
ifndef complocaledir
complocaledir = $(libdir)/locale
endif
inst_complocaledir = $(install_root)$(complocaledir)
# Where to install the message catalog data files (which are
# machine-independent).
ifndef localedir
localedir = $(datadir)/locale
endif
inst_localedir = $(install_root)$(localedir)
# Where to install the locale charmap source files.
ifndef i18ndir
i18ndir = $(datadir)/i18n
endif
inst_i18ndir = $(install_root)$(i18ndir)
# Where to install the shared object for charset transformation.
ifndef gconvdir
gconvdir = $(libdir)/gconv
endif
inst_gconvdir = $(install_root)$(gconvdir)
# Where to install programs.
ifndef bindir
bindir = $(exec_prefix)/bin
endif
inst_bindir = $(install_root)$(bindir)
# Where to install internal programs.
ifndef libexecdir
libexecdir = $(exec_prefix)/libexec
endif
inst_libexecdir = $(install_root)$(libexecdir)
# Where to install administrative programs.
ifndef rootsbindir
rootsbindir = $(exec_prefix)/sbin
endif
inst_rootsbindir = $(install_root)$(rootsbindir)
ifndef sbindir
sbindir = $(exec_prefix)/sbin
endif
inst_sbindir = $(install_root)$(sbindir)
# Where to install the Info files.
ifndef infodir
infodir = $(prefix)/info
endif
inst_infodir = $(install_root)$(infodir)
# Where to install audit libraries.
ifndef auditdir
auditdir = $(libdir)/audit
endif
inst_auditdir = $(install_root)$(auditdir)
# Where to install default configuration files. These include the local
# timezone specification and network data base files.
ifndef sysconfdir
sysconfdir = $(prefix)/etc
endif
inst_sysconfdir = $(install_root)$(sysconfdir)
# Directory for the database files and Makefile for nss_db.
ifndef vardbdir
vardbdir = $(localstatedir)/db
endif
inst_vardbdir = $(install_root)$(vardbdir)
# Where to install the "localtime" timezone file; this is the file whose
# contents $(localtime) specifies. If this is a relative pathname, it is
# relative to $(zonedir). It is a good idea to put this somewhere
# other than there, so the zoneinfo directory contains only universal data,
# localizing the configuration data elsewhere.
ifndef localtime-file
localtime-file = $(sysconfdir)/localtime
endif
# What to use for leap second specifications in compiling the default
# timezone files. Set this to `/dev/null' for no leap second handling as
# 1003.1 requires, or to `leapseconds' for proper leap second handling.
# Both zone flavors are always available as `posix/ZONE' and `right/ZONE'.
# This variable determines the default: if it's `/dev/null',
# ZONE==posix/ZONE; if it's `leapseconds', ZONE==right/ZONE.
ifndef leapseconds
leapseconds = /dev/null
endif
# What timezone's DST rules should be used when a POSIX-style TZ
# environment variable doesn't specify any rules. For 1003.1 compliance
# this timezone must use rules that are as U.S. federal law defines DST.
# Run `make -C time echo-zonenames' to see a list of available zone names.
# This setting can be changed with `zic -p TIMEZONE' at any time.
# If you want POSIX.1 compatibility, use `America/New_York'.
ifndef posixrules
posixrules = America/New_York
endif
# Where to install the "posixrules" timezone file; this is file
# whose contents $(posixrules) specifies. If this is a relative
# pathname, it is relative to $(zonedir).
ifndef posixrules-file
posixrules-file = posixrules
endif
# Directory where your system's native header files live.
# This is used on Unix systems to generate some GNU libc header files.
ifndef sysincludedir
sysincludedir = /usr/include
endif
# Commands to install files.
ifndef INSTALL_DATA
INSTALL_DATA = $(INSTALL) -m 644
endif
ifndef INSTALL_SCRIPT
INSTALL_SCRIPT = $(INSTALL)
endif
ifndef INSTALL_PROGRAM
INSTALL_PROGRAM = $(INSTALL)
endif
ifndef INSTALL
INSTALL = install
endif
# The name of the C compiler.
# If you've got GCC, and it works, use it.
ifeq ($(origin CC),default)
CC := gcc
endif
# The name of the C compiler to use for compilations of programs to run on
# the host that is building the library. If you set CC to a
# cross-compiler, you must set this to the normal compiler.
ifndef BUILD_CC
BUILD_CC = $(CC)
endif
# Default flags to pass the C compiler.
ifndef default_cflags
ifeq ($(release),stable)
default_cflags := -g -O2
else
default_cflags := -g -O
endif
endif
# Flags to pass the C compiler when assembling preprocessed assembly code
# (`.S' files).
ifndef asm-CPPFLAGS
asm-CPPFLAGS =
endif
as-needed := -Wl,--as-needed
no-as-needed := -Wl,--no-as-needed
# Must be supported by the linker.
no-whole-archive = -Wl,--no-whole-archive
whole-archive = -Wl,--whole-archive
# Installed name of the startup code.
# The ELF convention is that the startfile is called crt1.o
start-installed-name = crt1.o
# On systems that do not need a special startfile for statically linked
# binaries, simply set it to the normal name.
ifndef static-start-installed-name
static-start-installed-name = $(start-installed-name)
endif
ifeq (yesyes,$(build-shared)$(have-z-combreloc))
combreloc-LDFLAGS = -Wl,-z,combreloc
LDFLAGS.so += $(combreloc-LDFLAGS)
LDFLAGS-rtld += $(combreloc-LDFLAGS)
endif
relro-LDFLAGS = -Wl,-z,relro
LDFLAGS.so += $(relro-LDFLAGS)
LDFLAGS-rtld += $(relro-LDFLAGS)
ifeq (yes,$(have-hash-style))
# For the time being we unconditionally use 'both'. At some time we
# should declare statically linked code as 'out of luck' and compile
# with --hash-style=gnu only.
hashstyle-LDFLAGS = -Wl,--hash-style=both
LDFLAGS.so += $(hashstyle-LDFLAGS)
LDFLAGS-rtld += $(hashstyle-LDFLAGS)
endif
# Command to run after every final link (executable or shared object).
# This is invoked with $(call after-link,...), so it should operate on
# the file $1. This can be set to do some sort of post-processing on
# binaries, or to perform some sort of static sanity check.
ifndef after-link
after-link =
endif
# Command for linking PIE programs with the C library.
ifndef +link-pie
+link-pie-before-libc = $(CC) -pie -Wl,-O1 -nostdlib -nostartfiles -o $@ \
$(sysdep-LDFLAGS) $(LDFLAGS) $(LDFLAGS-$(@F)) \
$(combreloc-LDFLAGS) $(relro-LDFLAGS) $(hashstyle-LDFLAGS) \
$(addprefix $(csu-objpfx),S$(start-installed-name)) \
$(+preinit) $(+prectorS) \
$(filter-out $(addprefix $(csu-objpfx),start.o \
S$(start-installed-name))\
$(+preinit) $(link-extra-libs) \
$(common-objpfx)libc% $(+postinit),$^) \
$(link-extra-libs)
+link-pie-after-libc = $(+postctorS) $(+postinit)
define +link-pie
$(+link-pie-before-libc) $(rtld-LDFLAGS) $(link-libc) $(+link-pie-after-libc)
$(call after-link,$@)
endef
define +link-pie-tests
$(+link-pie-before-libc) $(rtld-tests-LDFLAGS) $(link-libc-tests) \
$(+link-pie-after-libc)
$(call after-link,$@)
endef
endif
# Command for statically linking programs with the C library.
ifndef +link-static
+link-static-before-libc = $(CC) -nostdlib -nostartfiles -static -o $@ \
$(sysdep-LDFLAGS) $(LDFLAGS) $(LDFLAGS-$(@F)) \
$(addprefix $(csu-objpfx),$(static-start-installed-name)) \
$(+preinit) $(+prectorT) \
$(filter-out $(addprefix $(csu-objpfx),start.o \
$(start-installed-name))\
$(+preinit) $(link-extra-libs-static) \
$(common-objpfx)libc% $(+postinit),$^) \
$(link-extra-libs-static)
+link-static-after-libc = $(+postctorT) $(+postinit)
define +link-static
$(+link-static-before-libc) $(link-libc-static) $(+link-static-after-libc)
$(call after-link,$@)
endef
define +link-static-tests
$(+link-static-before-libc) $(link-libc-static-tests) $(+link-static-after-libc)
$(call after-link,$@)
endef
endif
# Commands for linking programs with the C library.
ifndef +link
ifeq (yes,$(build-shared))
ifeq (yes,$(build-pie-default))
no-pie-ldflag = -no-pie
+link = $(+link-pie)
+link-tests = $(+link-pie-tests)
else
+link-before-libc = $(CC) -nostdlib -nostartfiles -o $@ \
$(sysdep-LDFLAGS) $(LDFLAGS) $(LDFLAGS-$(@F)) \
$(combreloc-LDFLAGS) $(relro-LDFLAGS) $(hashstyle-LDFLAGS) \
$(addprefix $(csu-objpfx),$(start-installed-name)) \
$(+preinit) $(+prector) \
$(filter-out $(addprefix $(csu-objpfx),start.o \
$(start-installed-name))\
$(+preinit) $(link-extra-libs) \
$(common-objpfx)libc% $(+postinit),$^) \
$(link-extra-libs)
+link-after-libc = $(+postctor) $(+postinit)
define +link
$(+link-before-libc) $(rtld-LDFLAGS) $(link-libc) $(+link-after-libc)
$(call after-link,$@)
endef
define +link-tests
$(+link-before-libc) $(rtld-tests-LDFLAGS) $(link-libc-tests) \
$(+link-after-libc)
$(call after-link,$@)
endef
endif
else
+link = $(+link-static)
+link-tests = $(+link-static-tests)
endif
endif
ifeq (yes,$(build-shared))
ifndef rtld-LDFLAGS
rtld-LDFLAGS = -Wl,-dynamic-linker=$(rtlddir)/$(rtld-installed-name)
endif
ifndef rtld-tests-LDFLAGS
ifeq (yes,$(build-hardcoded-path-in-tests))
rtld-tests-LDFLAGS = -Wl,-dynamic-linker=$(elf-objpfx)ld.so
else
rtld-tests-LDFLAGS = $(rtld-LDFLAGS)
endif
endif
endif
ifndef link-libc
ifeq (yes,$(build-shared))
# We need the versioned name of libc.so in the deps of $(others) et al
# so that the symlink to libc.so is created before anything tries to
# run the linked programs.
link-libc-rpath-link = -Wl,-rpath-link=$(rpath-link)
ifeq (yes,$(build-hardcoded-path-in-tests))
link-libc-tests-rpath-link = -Wl,-rpath=$(rpath-link)
else
link-libc-tests-rpath-link = $(link-libc-rpath-link)
endif
link-libc-before-gnulib = $(common-objpfx)libc.so$(libc.so-version) \
$(common-objpfx)$(patsubst %,$(libtype.oS),c) \
$(as-needed) $(elf-objpfx)ld.so \
$(no-as-needed)
link-libc = $(link-libc-rpath-link) $(link-libc-before-gnulib) $(gnulib)
link-libc-tests = $(link-libc-tests-rpath-link) \
$(link-libc-before-gnulib) $(gnulib-tests)
# This is how to find at build-time things that will be installed there.
rpath-dirs = math elf dlfcn nss nis rt resolv crypt mathvec
rpath-link = \
$(common-objdir):$(subst $(empty) ,:,$(patsubst ../$(subdir),.,$(rpath-dirs:%=$(common-objpfx)%)))
else
link-libc = $(common-objpfx)libc.a $(otherlibs) $(gnulib) $(common-objpfx)libc.a $(gnulib)
link-libc-tests = $(common-objpfx)libc.a $(otherlibs) $(gnulib-tests) $(common-objpfx)libc.a $(gnulib-tests)
endif
endif
# Differences in the linkers on the various platforms.
LDFLAGS-rpath-ORIGIN = -Wl,-rpath,'$$ORIGIN'
LDFLAGS-soname-fname = -Wl,-soname,$(@F)
LDFLAGS-rdynamic = -rdynamic
LDFLAGS-Bsymbolic = -Bsymbolic
# Choose the default search path for the dynamic linker based on
# where we will install libraries.
ifneq ($(libdir),$(slibdir))
default-rpath = $(slibdir):$(libdir)
else
default-rpath = $(libdir)
endif
ifndef link-extra-libs
link-extra-libs = $(LDLIBS-$(@F))
link-extra-libs-static = $(link-extra-libs)
endif
# The static libraries.
link-libc-static = -Wl,--start-group $(common-objpfx)libc.a $(static-gnulib) -Wl,--end-group
link-libc-static-tests = -Wl,--start-group $(common-objpfx)libc.a $(static-gnulib-tests) -Wl,--end-group
# How to link against libgcc. Some libgcc functions, such as those
# for "long long" arithmetic or software floating point, can always be
# built without use of C library headers and do not have any global
# state so can safely be linked statically into any executable or
# shared library requiring them; these functions are in libgcc.a.
# Other functions, relating to exception handling, may require C
# library headers to build and it may not be safe to have more than
# one copy of them in a process; these functions are only in
# libgcc_s.so and libgcc_eh.a.
#
# To avoid circular dependencies when bootstrapping, it is desirable
# to avoid use of libgcc_s and libgcc_eh in building glibc. Where any
# glibc functionality (in particular, thread cancellation) requires
# exception handling, this is implemented through dlopen of libgcc_s
# to avoid unnecessary dependencies on libgcc_s by programs not using
# that functionality; executables built with glibc do not use
# exception handling other than through thread cancellation.
#
# Undefined references to functions from libgcc_eh or libgcc_s may
# arise for code built with -fexceptions. In the case of statically
# linked programs installed by glibc, unwinding will never actually
# occur at runtime and the use of elf/static-stubs.c to resolve these
# references is safe. In the case of statically linked test programs
# and test programs built with -fexceptions, unwinding may occur in
# some cases and it is preferable to link with libgcc_eh or libgcc_s
# so that the testing is as similar as possible to how programs will
# be built with the installed glibc.
#
# Some architectures have architecture-specific systems for exception
# handling that may involve undefined references to
# architecture-specific functions. On those architectures,
# gnulib-arch and static-gnulib-arch may be defined in sysdeps
# makefiles to use additional libraries for linking executables and
# shared libraries built by glibc.
ifndef gnulib
ifneq ($(have-cc-with-libunwind),yes)
libunwind =
else
libunwind = -lunwind
endif
libgcc_eh := -Wl,--as-needed -lgcc_s $(libunwind) -Wl,--no-as-needed
gnulib-arch =
gnulib = -lgcc $(gnulib-arch)
gnulib-tests := -lgcc $(libgcc_eh)
static-gnulib-arch =
# By default, elf/static-stubs.o, instead of -lgcc_eh, is used to
# statically link programs. When --disable-shared is used, we use
# -lgcc_eh since elf/static-stubs.o isn't sufficient.
ifeq (yes,$(build-shared))
static-gnulib = -lgcc $(static-gnulib-arch)
else
static-gnulib = -lgcc -lgcc_eh $(static-gnulib-arch)
endif
static-gnulib-tests := -lgcc -lgcc_eh $(libunwind)
libc.so-gnulib := -lgcc
endif
+preinit = $(addprefix $(csu-objpfx),crti.o)
+postinit = $(addprefix $(csu-objpfx),crtn.o)
+prector = `$(CC) $(sysdep-LDFLAGS) --print-file-name=crtbegin.o`
+postctor = `$(CC) $(sysdep-LDFLAGS) --print-file-name=crtend.o`
# Variants of the two previous definitions for linking PIE programs.
+prectorS = `$(CC) $(sysdep-LDFLAGS) --print-file-name=crtbeginS.o`
+postctorS = `$(CC) $(sysdep-LDFLAGS) --print-file-name=crtendS.o`
# Variants of the two previous definitions for statically linking programs.
+prectorT = `$(CC) $(sysdep-LDFLAGS) --print-file-name=crtbeginT.o`
+postctorT = `$(CC) $(sysdep-LDFLAGS) --print-file-name=crtend.o`
csu-objpfx = $(common-objpfx)csu/
elf-objpfx = $(common-objpfx)elf/
# A command that, prepended to the name and arguments of a program,
# and run on the build system, causes that program with those
# arguments to be run on the host for which the library is built.
ifndef test-wrapper
test-wrapper =
endif
# Likewise, but the name of the program is preceded by
# <variable>=<value> assignments for environment variables.
ifndef test-wrapper-env
test-wrapper-env = $(test-wrapper) env
endif
# Likewise, but the program's environment will be empty except for any
# explicit <variable>=<value> assignments preceding the program name.
ifndef test-wrapper-env-only
test-wrapper-env-only = $(test-wrapper) env -i
endif
# Whether to run test programs built for the library's host system.
ifndef run-built-tests
ifeq (yes|,$(cross-compiling)|$(test-wrapper))
run-built-tests = no
else
run-built-tests = yes
endif
endif
# Whether to stop immediately when a test fails. Nonempty means to
# stop, empty means not to stop.
ifndef stop-on-test-failure
stop-on-test-failure =
endif
# How to run a program we just linked with our library.
# The program binary is assumed to be $(word 2,$^).
built-program-file = $(dir $(word 2,$^))$(notdir $(word 2,$^))
rtld-prefix = $(elf-objpfx)$(rtld-installed-name) \
--library-path \
$(rpath-link)$(patsubst %,:%,$(sysdep-library-path))
ifeq (yes,$(build-shared))
comma = ,
sysdep-library-path = \
$(subst $(empty) ,:,$(strip $(patsubst -Wl$(comma)-rpath-link=%, %,\
$(filter -Wl$(comma)-rpath-link=%,\
$(sysdep-LDFLAGS)))))
# $(run-via-rtld-prefix) is a command that, when prepended to the name
# of a program built with the newly built library, produces a command
# that, executed on the host for which the library is built, runs that
# program. For tests listed in tests-static or xtests-static, it is
# empty.
run-via-rtld-prefix = \
$(if $(strip $(filter $(notdir $(built-program-file)), \
$(tests-static) $(xtests-static))),, $(rtld-prefix))
else
run-via-rtld-prefix =
endif
# $(run-program-env) is the default environment variable settings to
# use when running a program built with the newly built library.
run-program-env = GCONV_PATH=$(common-objpfx)iconvdata \
LOCPATH=$(common-objpfx)localedata LC_ALL=C
# $(run-program-prefix) is a command that, when prepended to the name
# of a program built with the newly built library, produces a command
# that, executed on the build system on which "make" is run, runs that
# program. $(run-program-prefix-before-env) and
# $(run-program-prefix-after-env) are similar, but separate parts
# before and after a list of environment variables.
run-program-prefix-before-env = $(test-wrapper-env)
run-program-prefix-after-env = $(run-via-rtld-prefix)
run-program-prefix = $(run-program-prefix-before-env) $(run-program-env) \
$(run-program-prefix-after-env)
# $(built-program-cmd) is a command that, executed on the build system
# on which "make" is run, runs the newly built program that is the
# second dependency of the makefile target in which
# $(built-program-cmd) is used. $(built-program-cmd-before-env) and
# $(built-program-cmd-after-env) are similar, before and after a list
# of environment variables.
built-program-cmd-before-env = $(test-wrapper-env)
built-program-cmd-after-env = $(run-via-rtld-prefix) $(built-program-file)
built-program-cmd = $(built-program-cmd-before-env) $(run-program-env) \
$(built-program-cmd-after-env)
# $(host-built-program-cmd) is a command that, executed on the host
# for which the library is built, runs the newly built program that is
# the second dependency of the makefile target in which
# $(host-built-program-cmd) is used.
host-built-program-cmd = $(run-via-rtld-prefix) $(built-program-file)
ifndef LD
LD := ld -X
endif
# $(test-via-rtld-prefix) is a command that, when prepended to the name
# of a test program built with the newly built library, produces a command
# that, executed on the host for which the library is built, runs that
# program. For tests listed in tests-static or xtests-static as well
# as when test programs are hardcoded to the newly built libraries, it
# is empty.
# $(test-program-prefix) is a command that, when prepended to the name
# of a test program built with the newly built library, produces a command
# that, executed on the build system on which "make" is run, runs that
# test program. $(test-program-prefix-before-env) and
# $(test-program-prefix-after-env) are similar, before and after a
# list of environment variables.
# $(test-program-cmd) is a command that, executed on the build system
# on which "make" is run, runs the newly built test program that is the
# second dependency of the makefile target in which
# $(test-program-cmd) is used. $(test-program-cmd-before-env) and
# $(test-program-cmd-after-env) are similar, before and after a list
# of environment variables.
# $(host-test-program-cmd) is a command that, executed on the host
# for which the library is built, runs the newly built test program that
# is the second dependency of the makefile target in which
# $(host-test-program-cmd) is used.
ifeq (yes,$(build-hardcoded-path-in-tests))
test-via-rtld-prefix =
test-program-prefix-before-env = $(test-wrapper-env)
test-program-prefix-after-env =
test-program-prefix = $(test-program-prefix-before-env) $(run-program-env) \
$(test-program-prefix-after-env)
test-program-cmd-before-env = $(test-wrapper-env)
test-program-cmd-after-env = $(built-program-file)
test-program-cmd = $(test-program-cmd-before-env) $(run-program-env) \
$(test-program-cmd-after-env)
host-test-program-cmd = $(built-program-file)
else
test-via-rtld-prefix = $(run-via-rtld-prefix)
test-program-prefix-before-env = $(run-program-prefix-before-env)
test-program-prefix-after-env = $(run-program-prefix-after-env)
test-program-prefix = $(run-program-prefix)
test-program-cmd-before-env = $(built-program-cmd-before-env)
test-program-cmd-after-env = $(built-program-cmd-after-env)
test-program-cmd = $(built-program-cmd)
host-test-program-cmd = $(host-built-program-cmd)
endif
# Extra flags to pass to GCC.
ifeq ($(all-warnings),yes)
+gccwarn := -Wall -Wwrite-strings -Wcast-qual -Wbad-function-cast -Wmissing-noreturn -Wmissing-prototypes -Wmissing-declarations -Wcomment -Wcomments -Wtrigraphs -Wsign-compare -Wfloat-equal -Wmultichar
else
+gccwarn := -Wall -Wwrite-strings
endif
+gccwarn += -Wundef
ifeq ($(enable-werror),yes)
+gccwarn += -Werror
endif
+gccwarn-c = -Wstrict-prototypes -Wold-style-definition
# We do not depend on the address of constants in different files to be
# actually different, so allow the compiler to merge them all.
+merge-constants = -fmerge-all-constants
# We have to assume that glibc functions are called in any rounding
# mode and also change the rounding mode in a few functions. So,
# disable any optimization that assume default rounding mode.
+math-flags = -frounding-math
# This is the program that generates makefile dependencies from C source files.
# The -MP flag tells GCC >= 3.2 (which we now require) to produce dummy
# targets for headers so that removed headers don't break the build.
ifndef +mkdep
+mkdep = $(CC) -M -MP
endif
# The program that makes Emacs-style TAGS files.
ETAGS := etags
# The `xgettext' program for producing .pot files from sources.
ifndef XGETTEXT
XGETTEXT = xgettext
endif
# The `m4' macro processor; this is used by sysdeps/sparc/Makefile (and
# perhaps others) to preprocess assembly code in some cases.
M4 = m4
# To force installation of files even if they are older than the
# installed files. This variable is included in the dependency list
# of all installation targets.
ifeq ($(force-install),yes)
+force = force-install
else
+force =
endif
####
#### End of configuration variables.
####
# This tells some versions of GNU make before 3.63 not to export all variables.
.NOEXPORT:
# We want to echo the commands we're running without
# umpteen zillion filenames along with it (we use `...' instead)
# but we don't want this echoing done when the user has said
# he doesn't want to see commands echoed by using -s.
ifneq "$(findstring s,$(MAKEFLAGS))" "" # if -s
+cmdecho := echo >/dev/null
else # not -s
+cmdecho := echo
endif # -s
# These are the flags given to the compiler to tell
# it what sort of optimization and/or debugging output to do.
ifndef +cflags
# If `CFLAGS' was defined, use that.
ifdef CFLAGS
+cflags := $(filter-out -I%,$(CFLAGS))
endif # CFLAGS
endif # +cflags
# If none of the above worked, default to "-g -O".
ifeq "$(strip $(+cflags))" ""
+cflags := $(default_cflags)
endif # $(+cflags) == ""
+cflags += $(cflags-cpu) $(+gccwarn) $(+merge-constants) $(+math-flags)
+gcc-nowarn := -w
# Don't duplicate options if we inherited variables from the parent.
+cflags := $(sort $(+cflags))
# Each sysdeps directory can contain header files that both will be
# used to compile and will be installed. Each can also contain an
# include/ subdirectory, whose header files will be used to compile
# but will not be installed, and will take precedence over the
# installed files. This mirrors the top-level include/ subdirectory.
+sysdep-includes := $(foreach dir,$(+sysdep_dirs),\
$(addprefix -I,$(wildcard $(dir)/include) $(dir)))
# These are flags given to the C compiler to tell it to look for
# include files (including ones given in angle brackets) in the parent
# library source directory, in the include directory, and in the
# current directory.
+includes = -I$(..)include $(if $(subdir),$(objpfx:%/=-I%)) \
$(+sysdep-includes) $(includes) \
$(patsubst %/,-I%,$(..)) $(libio-include) -I. $(sysincludes)
# Since libio has several internal header files, we use a -I instead
# of many little headers in the include directory.
libio-include = -I$(..)libio
# List of non-library modules that we build.
built-modules = iconvprogs iconvdata ldconfig lddlibc4 libmemusage \
libSegFault libpcprofile librpcsvc locale-programs \
memusagestat nonlib nscd extramodules libnldbl
in-module = $(subst -,_,$(firstword $(libof-$(basename $(@F))) \
$(libof-$(<F)) \
$(libof-$(@F)) \
libc))
# Build ld.so, libc.so and libpthread.so with -ftls-model=initial-exec
tls-model = $(if $(filter libpthread rtld \
libc,$(in-module)),-ftls-model=initial-exec,)
module-cppflags-real = -include $(common-objpfx)libc-modules.h \
-DMODULE_NAME=$(in-module)
# We don't need libc-modules.h and the MODULE_NAME definition for .v.i
# files. These targets don't (and will likely never need to) use the IS_IN
# facility. In fact, shlib-versions should not use it because that will
# create a circular dependency as libc-modules.h is generated from
# shlib-versions.
module-cppflags = $(if $(filter %.v.i,$(@F)),,$(module-cppflags-real))
# These are the variables that the implicit compilation rules use.
# Note that we can't use -std=* in CPPFLAGS, because it overrides
# the implicit -lang-asm and breaks cpp behavior for .S files--notably
# it causes cpp to stop predefining __ASSEMBLER__.
CPPFLAGS = $(config-extra-cppflags) $(CPPUNDEFS) $(CPPFLAGS-config) \
$($(subdir)-CPPFLAGS) \
$(+includes) $(defines) $(module-cppflags) \
-include $(..)include/libc-symbols.h $(sysdep-CPPFLAGS) \
$(CPPFLAGS-$(suffix $@)) \
$(foreach lib,$(libof-$(basename $(@F))) \
$(libof-$(<F)) $(libof-$(@F)),$(CPPFLAGS-$(lib))) \
$(CPPFLAGS-$(<F)) $(CPPFLAGS-$(@F)) $(CPPFLAGS-$(basename $(@F)))
override CFLAGS = -std=gnu11 -fgnu89-inline $(config-extra-cflags) \
$(filter-out %frame-pointer,$(+cflags)) $(+gccwarn-c) \
$(sysdep-CFLAGS) $(CFLAGS-$(suffix $@)) $(CFLAGS-$(<F)) \
$(CFLAGS-$(@F)) $(tls-model) \
$(foreach lib,$(libof-$(basename $(@F))) \
$(libof-$(<F)) $(libof-$(@F)),$(CFLAGS-$(lib)))
override CXXFLAGS = $(c++-sysincludes) \
$(filter-out %frame-pointer,$(+cflags)) $(sysdep-CFLAGS) \
$(CFLAGS-$(suffix $@)) $(CFLAGS-$(<F)) $(CFLAGS-$(@F))
# If everything is compiled with -fPIC (implicitly) we must tell this by
# defining the PIC symbol.
ifeq (yes,$(build-pic-default))
pic-default = -DPIC
endif
# Enable object files for different versions of the library.
# Various things use $(object-suffixes) to know what all to make.
# The compilation rules use $(CPPFLAGS-${SUFFIX}) and $(CFLAGS-${SUFFIX})
# to pass different flags for each flavor.
libtypes = $(foreach o,$(object-suffixes-for-libc),$(libtype$o))
all-object-suffixes := .o .os .op .og .oS
object-suffixes :=
CPPFLAGS-.o = $(pic-default)
CFLAGS-.o = $(filter %frame-pointer,$(+cflags))
libtype.o := lib%.a
object-suffixes += .o
ifeq (yes,$(build-shared))
# Under --enable-shared, we will build a shared library of PIC objects.
# The PIC object files are named foo.os.
object-suffixes += .os
CPPFLAGS-.os = -DPIC -DSHARED
CFLAGS-.os = $(filter %frame-pointer,$(+cflags)) $(pic-ccflag)
libtype.os := lib%_pic.a
# This can be changed by a sysdep makefile
pic-ccflag = -fPIC
# This one should always stay like this unless there is a very good reason.
PIC-ccflag = -fPIC
endif
# This can be changed by a sysdep makefile
pie-ccflag = -fpie
# This one should always stay like this unless there is a very good reason.
PIE-ccflag = -fPIE
ifeq (yes,$(build-profile))
# Under --enable-profile, we will build a static library of profiled objects.
# The profiled object files are named foo.op.
object-suffixes += .op
CPPFLAGS-.op = -DPROF $(pic-default)
CFLAGS-.op = -pg
libtype.op = lib%_p.a
endif
# Convenience variable for when we want to treat shared-library cases
# differently from the rest.
object-suffixes-noshared := $(filter-out .os,$(object-suffixes))
object-suffixes-for-libc := $(object-suffixes)
ifeq (yes,$(build-shared))
# Build special library that contains the static-only routines for libc.
object-suffixes-for-libc += .oS
# Must build the routines as PIC, though, because they can end up in (users')
# shared objects. We don't want to use CFLAGS-os because users may, for
# example, make that processor-specific.
CFLAGS-.oS = $(CFLAGS-.o) $(PIC-ccflag)
CPPFLAGS-.oS = $(CPPFLAGS-.o) -DPIC -DLIBC_NONSHARED=1
libtype.oS = lib%_nonshared.a
endif
# The assembler can generate debug information too.
ifndef ASFLAGS
ASFLAGS := $(filter -g% -fdebug-prefix-map=%,$(CFLAGS))
endif
ASFLAGS += -Werror=undef $(ASFLAGS-config) $(asflags-cpu)
ifndef BUILD_CC
BUILD_CC = $(CC)
endif
move-if-change = $(SHELL) $(..)scripts/move-if-change
-include $(common-objpfx)sysd-sorted
subdirs = $(sorted-subdirs)
subdir-srcdirs = $(foreach dir,$(subdirs),\
$(firstword $($(dir)-srcdir) $(..)$(dir)))
# This is a pair of implicit rules to preprocess a file with # comments,
# %ifdef et al, based on config.h settings or other %include'd files.
# We use chained rules instead of a pipeline here so that we can properly
# check the exit status of cpp rather than using its bad output when there
# is a preprocessing error. Another rule should depend on the output file
# `FOO.v', and along with that `FOO.v.i' should be given dependencies
# listing both its input files, and any header files that it may reference
# (but no commands).
%.v.i: $(common-objpfx)config.h $(..)Makeconfig
sed '/^[ ]*%/!s/#.*$$//;/^[ ]*$$/d;s/^[ ]*%/#/' \
$(filter-out FORCE %.h $(..)Makeconfig,$^) \
| $(CC) -E -undef $(CPPFLAGS) -x assembler-with-cpp - \
> $@T
mv -f $@T $@
%.v: %.v.i
sed '/^[ ]*#/d;/^[ ]*$$/d' $< > $@T
mv -f $@T $@
ifeq (yes, $(build-shared))
# To generate a header to support more than one ABI for different
# architecture variants, the CPU/Makefile defines abi-variants to be a
# list of names for those variants (e.g. 32 64), and, for each variant,
# defines abi-$(variant)-condition to be the condition for those options
# to use in a C #if condition. abi-includes may be defined to a list of
# headers to include in the generated header, if the default does not
# suffice. default-abi is defined to be the ABI for the current glibc
# build.
ifndef abi-includes
abi-includes := bits/wordsize.h
endif
# Process the shlib-versions file, which tells us what shared library
# version numbers to use when we install shared objects on this system.
# We need to wait until $(subdirs) is complete.
ifeq ($(sysd-sorted-done),t)
-include $(common-objpfx)soversions.mk
ifndef avoid-generated
# This lets add-ons give more-specific matches that override defaults
# in the top-level file.
$(common-objpfx)shlib-versions.v.i: \
$(wildcard $(+sysdep_dirs:=/shlib-versions) \
$(subdir-srcdirs:=/shlib-versions)) \
$(..)shlib-versions
$(common-objpfx)soversions.i: $(..)scripts/soversions.awk \
$(common-objpfx)shlib-versions.v
$(AWK) -f $^ > $@T
mv -f $@T $@
$(common-objpfx)soversions.mk: $(common-objpfx)soversions.i $(..)Makeconfig
(while read which lib number setname; do \
eval seen_$$which=1; \
test x"$$which" = xDEFAULT || continue; \
case $$number in \
[0-9]*) echo "$$lib.so-version=.$$number"; \
echo "all-sonames+=$$lib=$$lib.so\$$($$lib.so-version)";;\
*) echo "$$lib.so-version=$$number"; \
echo "all-sonames+=$$lib=\$$($$lib.so-version)";;\
esac; \
done; \
echo soversions.mk-done = t;) < $< > $@T; exit 0
mv -f $@T $@
endif
endif
postclean-generated += soversions.mk soversions.i \
shlib-versions.v shlib-versions.v.i
before-compile += $(common-objpfx)libc-modules.h
ifeq ($(soversions.mk-done),t)
# Generate a header with macro definitions for use with the IS_IN macro.
# These are the possible values for the MODULE_NAME macro defined when building
# sources, to identify which module the translation unit is going to be built
# into.
$(common-objpfx)libc-modules.h: $(common-objpfx)libc-modules.stmp; @:
$(common-objpfx)libc-modules.stmp: $(..)scripts/gen-libc-modules.awk \
$(common-objpfx)soversions.i
$(AWK) -v buildlist="$(subst -,_,$(built-modules))" -f $^ > ${@:stmp=T}
$(move-if-change) ${@:stmp=T} ${@:stmp=h}
touch $@
endif
common-generated += libc-modules.h libc-modules.stmp
# The name under which the run-time dynamic linker is installed.
# We are currently going for the convention that `/lib/ld.so.1'
# names the SVR4/ELF ABI-compliant dynamic linker.
ifndef rtld-installed-name
ifdef ld.so-version
rtld-installed-name = $(ld.so-version)
else
rtld-installed-name = ld.so.1
endif
endif
ifndef rtld-version-installed-name
rtld-version-installed-name = ld-$(version).so
endif
endif # build-shared
ifeq ($(build-shared),yes)
libdl = $(common-objpfx)dlfcn/libdl.so$(libdl.so-version)
else
libdl = $(common-objpfx)dlfcn/libdl.a
endif
ifeq ($(build-shared),yes)
libm = $(common-objpfx)math/libm.so$(libm.so-version)
libmvec = $(common-objpfx)mathvec/libmvec.so$(libmvec.so-version)
else
libm = $(common-objpfx)math/libm.a
libmvec = $(common-objpfx)mathvec/libmvec.a
endif
# These are the subdirectories containing the library source. The order
# is more or less arbitrary. The sorting step will take care of the
# dependencies.
all-subdirs = csu assert ctype locale intl catgets math setjmp signal \
stdlib stdio-common libio malloc string wcsmbs time dirent \
grp pwd posix io termios resource misc socket sysvipc gmon \
gnulib iconv iconvdata wctype manual shadow gshadow po argp \
crypt localedata timezone rt conform debug mathvec \
$(add-on-subdirs) dlfcn elf
ifndef avoid-generated
# sysd-sorted itself will contain rules making the sysd-sorted target
# depend on Depend files. But if you just added a Depend file to an
# existing directory not in all-subdirs, then sysd-sorted needs to
# be regenerated, so it depends on existing $(sorted-subdirs:=/Depend) files.
all-Depend-files := $(wildcard $(sort \
$(foreach dir,$(all-subdirs),\
$(firstword $($(dir)-srcdir) \
$(..)$(dir))/Depend) \
$(sorted-subdirs:=/Depend)))
$(common-objpfx)sysd-sorted: $(..)scripts/gen-sorted.awk \
$(common-objpfx)config.make $(..)Makeconfig \
$(wildcard $(sysdirs:=/Subdirs)) \
$(all-Depend-files)
$(AWK) -f $< \
-v subdirs='$(all-subdirs)' \
-v srcpfx='$(..)' \
$(filter %/Subdirs %/Depend,$^) > $@-tmp
mv -f $@-tmp $@
$(all-Depend-files): ;
endif
# This gives partial TARGET:SOURCE pattern pairs to have rules
# emitted into sysd-rules. A sysdeps Makeconfig fragment can
# add its own special object file prefix to this list with e.g. foo-%:%
# to have foo-*.? compiled from *.? using $(foo-CPPFLAGS).
sysd-rules-patterns := %:% rtld-%:rtld-% rtld-%:% m_%:s_%
# Let sysdeps/ subdirs contain a Makeconfig fragment for us to include here.
sysdep-makeconfigs := $(wildcard $(+sysdep_dirs:=/Makeconfig))
ifneq (,$(sysdep-makeconfigs))
include $(sysdep-makeconfigs)
endif
# Compute just the target patterns. Makeconfig has set sysd-rules-patterns.
sysd-rules-targets := $(sort $(foreach p,$(sysd-rules-patterns),\
$(firstword $(subst :, ,$p))))
# A sysdeps Makeconfig fragment may set libc-reentrant to yes.
ifeq (yes,$(libc-reentrant))
defines += -D_LIBC_REENTRANT
libio-mtsafe = -D_IO_MTSAFE_IO
endif
# The name to give to a test in test results summaries.
test-name = $(strip $(patsubst %.out, %, $(patsubst $(common-objpfx)%, %, $@)))
# Likewise, in XFAIL variable names.
test-xfail-name = $(strip $(patsubst %.out, %, $(patsubst $(objpfx)%, %, $@)))
# Command to output a test status line (such as PASS: test-name). If
# test-xfail-$(test-xfail-name) has a nonempty value, the status will be
# XPASS or XFAIL rather than PASS or FAIL.
evaluate-test = $(..)scripts/evaluate-test.sh $(test-name) $$? \
$(if $(test-xfail-$(test-xfail-name)),true,false) \
$(if $(stop-on-test-failure),true,false) \
> $(common-objpfx)$(test-name).test-result
endif # Makeconfig not yet included
# Local Variables:
# mode: makefile
# End: