diff --git a/Makefile.config.in b/Makefile.config.in index 08edcb86..fad077d8 100644 --- a/Makefile.config.in +++ b/Makefile.config.in @@ -15,6 +15,7 @@ SODIUM_LIBS = @SODIUM_LIBS@ LIBLZMA_LIBS = @LIBLZMA_LIBS@ SQLITE3_LIBS = @SQLITE3_LIBS@ LIBBROTLI_LIBS = @LIBBROTLI_LIBS@ +EDITLINE_LIBS = @EDITLINE_LIBS@ bash = @bash@ bindir = @bindir@ brotli = @brotli@ diff --git a/configure.ac b/configure.ac index 9c85182e..85fec77a 100644 --- a/configure.ac +++ b/configure.ac @@ -164,6 +164,8 @@ PKG_CHECK_MODULES([SQLITE3], [sqlite3 >= 3.6.19], [CXXFLAGS="$SQLITE3_CFLAGS $CX # Look for libcurl, a required dependency. PKG_CHECK_MODULES([LIBCURL], [libcurl], [CXXFLAGS="$LIBCURL_CFLAGS $CXXFLAGS"]) +# Look for editline, a required dependency. +PKG_CHECK_MODULES([EDITLINE], [libeditline], [CXXFLAGS="$EDITLINE_CFLAGS $CXXFLAGS"]) # Look for libsodium, an optional dependency. PKG_CHECK_MODULES([SODIUM], [libsodium], diff --git a/doc/manual/introduction/about-nix.xml b/doc/manual/introduction/about-nix.xml index e8c0a297..c21ed34d 100644 --- a/doc/manual/introduction/about-nix.xml +++ b/doc/manual/introduction/about-nix.xml @@ -262,12 +262,6 @@ xlink:href="http://nixos.org/">NixOS homepage. xlink:href="http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html">GNU LGPLv2.1 or (at your option) any later version. -Nix uses the linenoise-ng -library, which has the following license: - - - diff --git a/editline.nix b/editline.nix new file mode 100644 index 00000000..d9b5a2b6 --- /dev/null +++ b/editline.nix @@ -0,0 +1,24 @@ +{ stdenv, fetchFromGitHub, autoreconfHook }: + +stdenv.mkDerivation rec { + name = "editline-${version}"; + version = "1.15.3"; + src = fetchFromGitHub { + owner = "troglobit"; + repo = "editline"; + rev = version; + sha256 = "0dm5fgq0acpprr938idwml64nclg9l6c6avirsd8r6f40qicbgma"; + }; + + nativeBuildInputs = [ autoreconfHook ]; + + dontDisableStatic = true; + + meta = with stdenv.lib; { + homepage = http://troglobit.com/editline.html; + description = "A readline() replacement for UNIX without termcap (ncurses)"; + license = licenses.bsdOriginal; + maintainers = with maintainers; [ dtzWill ]; + platforms = platforms.all; + }; +} diff --git a/release-common.nix b/release-common.nix index ace2a4f9..690860ab 100644 --- a/release-common.nix +++ b/release-common.nix @@ -29,6 +29,8 @@ rec { ''; }); + editline = pkgs.editline or (pkgs.callPackage ./editline.nix {}); + configureFlags = [ "--enable-gc" @@ -49,7 +51,7 @@ rec { buildDeps = [ curl - bzip2 xz brotli + bzip2 xz brotli editline openssl pkgconfig sqlite boehmgc boost diff --git a/src/linenoise/ConvertUTF.cpp b/src/linenoise/ConvertUTF.cpp deleted file mode 100644 index f7e5915d..00000000 --- a/src/linenoise/ConvertUTF.cpp +++ /dev/null @@ -1,542 +0,0 @@ -/* - * Copyright 2001-2004 Unicode, Inc. - * - * Disclaimer - * - * This source code is provided as is by Unicode, Inc. No claims are - * made as to fitness for any particular purpose. No warranties of any - * kind are expressed or implied. The recipient agrees to determine - * applicability of information provided. If this file has been - * purchased on magnetic or optical media from Unicode, Inc., the - * sole remedy for any claim will be exchange of defective media - * within 90 days of receipt. - * - * Limitations on Rights to Redistribute This Code - * - * Unicode, Inc. hereby grants the right to freely use the information - * supplied in this file in the creation of products supporting the - * Unicode Standard, and to make copies of this file in any form - * for internal or external distribution as long as this notice - * remains attached. - */ - -/* --------------------------------------------------------------------- - - Conversions between UTF32, UTF-16, and UTF-8. Source code file. - Author: Mark E. Davis, 1994. - Rev History: Rick McGowan, fixes & updates May 2001. - Sept 2001: fixed const & error conditions per - mods suggested by S. Parent & A. Lillich. - June 2002: Tim Dodd added detection and handling of incomplete - source sequences, enhanced error detection, added casts - to eliminate compiler warnings. - July 2003: slight mods to back out aggressive FFFE detection. - Jan 2004: updated switches in from-UTF8 conversions. - Oct 2004: updated to use UNI_MAX_LEGAL_UTF32 in UTF-32 conversions. - - See the header file "ConvertUTF.h" for complete documentation. - ------------------------------------------------------------------------- */ - -#include "ConvertUTF.h" -#ifdef CVTUTF_DEBUG -#include -#endif - -namespace linenoise_ng { - -static const int halfShift = 10; /* used for shifting by 10 bits */ - -static const UTF32 halfBase = 0x0010000UL; -static const UTF32 halfMask = 0x3FFUL; - -#define UNI_SUR_HIGH_START (UTF32)0xD800 -#define UNI_SUR_HIGH_END (UTF32)0xDBFF -#define UNI_SUR_LOW_START (UTF32)0xDC00 -#define UNI_SUR_LOW_END (UTF32)0xDFFF -#define false 0 -#define true 1 - -/* --------------------------------------------------------------------- */ - -ConversionResult ConvertUTF32toUTF16 ( - const UTF32** sourceStart, const UTF32* sourceEnd, - char16_t** targetStart, char16_t* targetEnd, ConversionFlags flags) { - ConversionResult result = conversionOK; - const UTF32* source = *sourceStart; - char16_t* target = *targetStart; - while (source < sourceEnd) { - UTF32 ch; - if (target >= targetEnd) { - result = targetExhausted; break; - } - ch = *source++; - if (ch <= UNI_MAX_BMP) { /* Target is a character <= 0xFFFF */ - /* UTF-16 surrogate values are illegal in UTF-32; 0xffff or 0xfffe are both reserved values */ - if (ch >= UNI_SUR_HIGH_START && ch <= UNI_SUR_LOW_END) { - if (flags == strictConversion) { - --source; /* return to the illegal value itself */ - result = sourceIllegal; - break; - } else { - *target++ = UNI_REPLACEMENT_CHAR; - } - } else { - *target++ = (UTF16)ch; /* normal case */ - } - } else if (ch > UNI_MAX_LEGAL_UTF32) { - if (flags == strictConversion) { - result = sourceIllegal; - } else { - *target++ = UNI_REPLACEMENT_CHAR; - } - } else { - /* target is a character in range 0xFFFF - 0x10FFFF. */ - if (target + 1 >= targetEnd) { - --source; /* Back up source pointer! */ - result = targetExhausted; break; - } - ch -= halfBase; - *target++ = (UTF16)((ch >> halfShift) + UNI_SUR_HIGH_START); - *target++ = (UTF16)((ch & halfMask) + UNI_SUR_LOW_START); - } - } - *sourceStart = source; - *targetStart = target; - return result; -} - -/* --------------------------------------------------------------------- */ - -ConversionResult ConvertUTF16toUTF32 ( - const UTF16** sourceStart, const UTF16* sourceEnd, - UTF32** targetStart, UTF32* targetEnd, ConversionFlags flags) { - ConversionResult result = conversionOK; - const UTF16* source = *sourceStart; - UTF32* target = *targetStart; - UTF32 ch, ch2; - while (source < sourceEnd) { - const UTF16* oldSource = source; /* In case we have to back up because of target overflow. */ - ch = *source++; - /* If we have a surrogate pair, convert to UTF32 first. */ - if (ch >= UNI_SUR_HIGH_START && ch <= UNI_SUR_HIGH_END) { - /* If the 16 bits following the high surrogate are in the source buffer... */ - if (source < sourceEnd) { - ch2 = *source; - /* If it's a low surrogate, convert to UTF32. */ - if (ch2 >= UNI_SUR_LOW_START && ch2 <= UNI_SUR_LOW_END) { - ch = ((ch - UNI_SUR_HIGH_START) << halfShift) - + (ch2 - UNI_SUR_LOW_START) + halfBase; - ++source; - } else if (flags == strictConversion) { /* it's an unpaired high surrogate */ - --source; /* return to the illegal value itself */ - result = sourceIllegal; - break; - } - } else { /* We don't have the 16 bits following the high surrogate. */ - --source; /* return to the high surrogate */ - result = sourceExhausted; - break; - } - } else if (flags == strictConversion) { - /* UTF-16 surrogate values are illegal in UTF-32 */ - if (ch >= UNI_SUR_LOW_START && ch <= UNI_SUR_LOW_END) { - --source; /* return to the illegal value itself */ - result = sourceIllegal; - break; - } - } - if (target >= targetEnd) { - source = oldSource; /* Back up source pointer! */ - result = targetExhausted; break; - } - *target++ = ch; - } - *sourceStart = source; - *targetStart = target; -#ifdef CVTUTF_DEBUG -if (result == sourceIllegal) { - fprintf(stderr, "ConvertUTF16toUTF32 illegal seq 0x%04x,%04x\n", ch, ch2); - fflush(stderr); -} -#endif - return result; -} - -/* --------------------------------------------------------------------- */ - -/* - * Index into the table below with the first byte of a UTF-8 sequence to - * get the number of trailing bytes that are supposed to follow it. - * Note that *legal* UTF-8 values can't have 4 or 5-bytes. The table is - * left as-is for anyone who may want to do such conversion, which was - * allowed in earlier algorithms. - */ -static const char trailingBytesForUTF8[256] = { - 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, - 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, - 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, - 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, - 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, - 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, - 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1, 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1, - 2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2, 3,3,3,3,3,3,3,3,4,4,4,4,5,5,5,5 -}; - -/* - * Magic values subtracted from a buffer value during UTF8 conversion. - * This table contains as many values as there might be trailing bytes - * in a UTF-8 sequence. - */ -static const UTF32 offsetsFromUTF8[6] = { 0x00000000UL, 0x00003080UL, 0x000E2080UL, - 0x03C82080UL, 0xFA082080UL, 0x82082080UL }; - -/* - * Once the bits are split out into bytes of UTF-8, this is a mask OR-ed - * into the first byte, depending on how many bytes follow. There are - * as many entries in this table as there are UTF-8 sequence types. - * (I.e., one byte sequence, two byte... etc.). Remember that sequencs - * for *legal* UTF-8 will be 4 or fewer bytes total. - */ -static const UTF8 firstByteMark[7] = { 0x00, 0x00, 0xC0, 0xE0, 0xF0, 0xF8, 0xFC }; - -/* --------------------------------------------------------------------- */ - -/* The interface converts a whole buffer to avoid function-call overhead. - * Constants have been gathered. Loops & conditionals have been removed as - * much as possible for efficiency, in favor of drop-through switches. - * (See "Note A" at the bottom of the file for equivalent code.) - * If your compiler supports it, the "isLegalUTF8" call can be turned - * into an inline function. - */ - -/* --------------------------------------------------------------------- */ - -ConversionResult ConvertUTF16toUTF8 ( - const UTF16** sourceStart, const UTF16* sourceEnd, - UTF8** targetStart, UTF8* targetEnd, ConversionFlags flags) { - ConversionResult result = conversionOK; - const UTF16* source = *sourceStart; - UTF8* target = *targetStart; - while (source < sourceEnd) { - UTF32 ch; - unsigned short bytesToWrite = 0; - const UTF32 byteMask = 0xBF; - const UTF32 byteMark = 0x80; - const UTF16* oldSource = source; /* In case we have to back up because of target overflow. */ - ch = *source++; - /* If we have a surrogate pair, convert to UTF32 first. */ - if (ch >= UNI_SUR_HIGH_START && ch <= UNI_SUR_HIGH_END) { - /* If the 16 bits following the high surrogate are in the source buffer... */ - if (source < sourceEnd) { - UTF32 ch2 = *source; - /* If it's a low surrogate, convert to UTF32. */ - if (ch2 >= UNI_SUR_LOW_START && ch2 <= UNI_SUR_LOW_END) { - ch = ((ch - UNI_SUR_HIGH_START) << halfShift) - + (ch2 - UNI_SUR_LOW_START) + halfBase; - ++source; - } else if (flags == strictConversion) { /* it's an unpaired high surrogate */ - --source; /* return to the illegal value itself */ - result = sourceIllegal; - break; - } - } else { /* We don't have the 16 bits following the high surrogate. */ - --source; /* return to the high surrogate */ - result = sourceExhausted; - break; - } - } else if (flags == strictConversion) { - /* UTF-16 surrogate values are illegal in UTF-32 */ - if (ch >= UNI_SUR_LOW_START && ch <= UNI_SUR_LOW_END) { - --source; /* return to the illegal value itself */ - result = sourceIllegal; - break; - } - } - /* Figure out how many bytes the result will require */ - if (ch < (UTF32)0x80) { bytesToWrite = 1; - } else if (ch < (UTF32)0x800) { bytesToWrite = 2; - } else if (ch < (UTF32)0x10000) { bytesToWrite = 3; - } else if (ch < (UTF32)0x110000) { bytesToWrite = 4; - } else { bytesToWrite = 3; - ch = UNI_REPLACEMENT_CHAR; - } - - target += bytesToWrite; - if (target > targetEnd) { - source = oldSource; /* Back up source pointer! */ - target -= bytesToWrite; result = targetExhausted; break; - } - switch (bytesToWrite) { /* note: everything falls through. */ - case 4: *--target = (UTF8)((ch | byteMark) & byteMask); ch >>= 6; - case 3: *--target = (UTF8)((ch | byteMark) & byteMask); ch >>= 6; - case 2: *--target = (UTF8)((ch | byteMark) & byteMask); ch >>= 6; - case 1: *--target = (UTF8)(ch | firstByteMark[bytesToWrite]); - } - target += bytesToWrite; - } - *sourceStart = source; - *targetStart = target; - return result; -} - -/* --------------------------------------------------------------------- */ - -/* - * Utility routine to tell whether a sequence of bytes is legal UTF-8. - * This must be called with the length pre-determined by the first byte. - * If not calling this from ConvertUTF8to*, then the length can be set by: - * length = trailingBytesForUTF8[*source]+1; - * and the sequence is illegal right away if there aren't that many bytes - * available. - * If presented with a length > 4, this returns false. The Unicode - * definition of UTF-8 goes up to 4-byte sequences. - */ - -static Boolean isLegalUTF8(const UTF8 *source, int length) { - UTF8 a; - const UTF8 *srcptr = source+length; - switch (length) { - default: return false; - /* Everything else falls through when "true"... */ - case 4: if ((a = (*--srcptr)) < 0x80 || a > 0xBF) return false; - case 3: if ((a = (*--srcptr)) < 0x80 || a > 0xBF) return false; - case 2: if ((a = (*--srcptr)) > 0xBF) return false; - - switch (*source) { - /* no fall-through in this inner switch */ - case 0xE0: if (a < 0xA0) return false; break; - case 0xED: if (a > 0x9F) return false; break; - case 0xF0: if (a < 0x90) return false; break; - case 0xF4: if (a > 0x8F) return false; break; - default: if (a < 0x80) return false; - } - - case 1: if (*source >= 0x80 && *source < 0xC2) return false; - } - if (*source > 0xF4) return false; - return true; -} - -/* --------------------------------------------------------------------- */ - -/* - * Exported function to return whether a UTF-8 sequence is legal or not. - * This is not used here; it's just exported. - */ -Boolean isLegalUTF8Sequence(const UTF8 *source, const UTF8 *sourceEnd) { - int length = trailingBytesForUTF8[*source]+1; - if (source+length > sourceEnd) { - return false; - } - return isLegalUTF8(source, length); -} - -/* --------------------------------------------------------------------- */ - -ConversionResult ConvertUTF8toUTF16 ( - const UTF8** sourceStart, const UTF8* sourceEnd, - UTF16** targetStart, UTF16* targetEnd, ConversionFlags flags) { - ConversionResult result = conversionOK; - const UTF8* source = *sourceStart; - UTF16* target = *targetStart; - while (source < sourceEnd) { - UTF32 ch = 0; - unsigned short extraBytesToRead = trailingBytesForUTF8[*source]; - if (source + extraBytesToRead >= sourceEnd) { - result = sourceExhausted; break; - } - /* Do this check whether lenient or strict */ - if (! isLegalUTF8(source, extraBytesToRead+1)) { - result = sourceIllegal; - break; - } - /* - * The cases all fall through. See "Note A" below. - */ - switch (extraBytesToRead) { - case 5: ch += *source++; ch <<= 6; /* remember, illegal UTF-8 */ - case 4: ch += *source++; ch <<= 6; /* remember, illegal UTF-8 */ - case 3: ch += *source++; ch <<= 6; - case 2: ch += *source++; ch <<= 6; - case 1: ch += *source++; ch <<= 6; - case 0: ch += *source++; - } - ch -= offsetsFromUTF8[extraBytesToRead]; - - if (target >= targetEnd) { - source -= (extraBytesToRead+1); /* Back up source pointer! */ - result = targetExhausted; break; - } - if (ch <= UNI_MAX_BMP) { /* Target is a character <= 0xFFFF */ - /* UTF-16 surrogate values are illegal in UTF-32 */ - if (ch >= UNI_SUR_HIGH_START && ch <= UNI_SUR_LOW_END) { - if (flags == strictConversion) { - source -= (extraBytesToRead+1); /* return to the illegal value itself */ - result = sourceIllegal; - break; - } else { - *target++ = UNI_REPLACEMENT_CHAR; - } - } else { - *target++ = (UTF16)ch; /* normal case */ - } - } else if (ch > UNI_MAX_UTF16) { - if (flags == strictConversion) { - result = sourceIllegal; - source -= (extraBytesToRead+1); /* return to the start */ - break; /* Bail out; shouldn't continue */ - } else { - *target++ = UNI_REPLACEMENT_CHAR; - } - } else { - /* target is a character in range 0xFFFF - 0x10FFFF. */ - if (target + 1 >= targetEnd) { - source -= (extraBytesToRead+1); /* Back up source pointer! */ - result = targetExhausted; break; - } - ch -= halfBase; - *target++ = (UTF16)((ch >> halfShift) + UNI_SUR_HIGH_START); - *target++ = (UTF16)((ch & halfMask) + UNI_SUR_LOW_START); - } - } - *sourceStart = source; - *targetStart = target; - return result; -} - -/* --------------------------------------------------------------------- */ - -ConversionResult ConvertUTF32toUTF8 ( - const UTF32** sourceStart, const UTF32* sourceEnd, - UTF8** targetStart, UTF8* targetEnd, ConversionFlags flags) { - ConversionResult result = conversionOK; - const UTF32* source = *sourceStart; - UTF8* target = *targetStart; - while (source < sourceEnd) { - UTF32 ch; - unsigned short bytesToWrite = 0; - const UTF32 byteMask = 0xBF; - const UTF32 byteMark = 0x80; - ch = *source++; - if (flags == strictConversion ) { - /* UTF-16 surrogate values are illegal in UTF-32 */ - if (ch >= UNI_SUR_HIGH_START && ch <= UNI_SUR_LOW_END) { - --source; /* return to the illegal value itself */ - result = sourceIllegal; - break; - } - } - /* - * Figure out how many bytes the result will require. Turn any - * illegally large UTF32 things (> Plane 17) into replacement chars. - */ - if (ch < (UTF32)0x80) { bytesToWrite = 1; - } else if (ch < (UTF32)0x800) { bytesToWrite = 2; - } else if (ch < (UTF32)0x10000) { bytesToWrite = 3; - } else if (ch <= UNI_MAX_LEGAL_UTF32) { bytesToWrite = 4; - } else { bytesToWrite = 3; - ch = UNI_REPLACEMENT_CHAR; - result = sourceIllegal; - } - - target += bytesToWrite; - if (target > targetEnd) { - --source; /* Back up source pointer! */ - target -= bytesToWrite; result = targetExhausted; break; - } - switch (bytesToWrite) { /* note: everything falls through. */ - case 4: *--target = (UTF8)((ch | byteMark) & byteMask); ch >>= 6; - case 3: *--target = (UTF8)((ch | byteMark) & byteMask); ch >>= 6; - case 2: *--target = (UTF8)((ch | byteMark) & byteMask); ch >>= 6; - case 1: *--target = (UTF8) (ch | firstByteMark[bytesToWrite]); - } - target += bytesToWrite; - } - *sourceStart = source; - *targetStart = target; - return result; -} - -/* --------------------------------------------------------------------- */ - -ConversionResult ConvertUTF8toUTF32 ( - const UTF8** sourceStart, const UTF8* sourceEnd, - UTF32** targetStart, UTF32* targetEnd, ConversionFlags flags) { - ConversionResult result = conversionOK; - const UTF8* source = *sourceStart; - UTF32* target = *targetStart; - while (source < sourceEnd) { - UTF32 ch = 0; - unsigned short extraBytesToRead = trailingBytesForUTF8[*source]; - if (source + extraBytesToRead >= sourceEnd) { - result = sourceExhausted; break; - } - /* Do this check whether lenient or strict */ - if (! isLegalUTF8(source, extraBytesToRead+1)) { - result = sourceIllegal; - break; - } - /* - * The cases all fall through. See "Note A" below. - */ - switch (extraBytesToRead) { - case 5: ch += *source++; ch <<= 6; - case 4: ch += *source++; ch <<= 6; - case 3: ch += *source++; ch <<= 6; - case 2: ch += *source++; ch <<= 6; - case 1: ch += *source++; ch <<= 6; - case 0: ch += *source++; - } - ch -= offsetsFromUTF8[extraBytesToRead]; - - if (target >= targetEnd) { - source -= (extraBytesToRead+1); /* Back up the source pointer! */ - result = targetExhausted; break; - } - if (ch <= UNI_MAX_LEGAL_UTF32) { - /* - * UTF-16 surrogate values are illegal in UTF-32, and anything - * over Plane 17 (> 0x10FFFF) is illegal. - */ - if (ch >= UNI_SUR_HIGH_START && ch <= UNI_SUR_LOW_END) { - if (flags == strictConversion) { - source -= (extraBytesToRead+1); /* return to the illegal value itself */ - result = sourceIllegal; - break; - } else { - *target++ = UNI_REPLACEMENT_CHAR; - } - } else { - *target++ = ch; - } - } else { /* i.e., ch > UNI_MAX_LEGAL_UTF32 */ - result = sourceIllegal; - *target++ = UNI_REPLACEMENT_CHAR; - } - } - *sourceStart = source; - *targetStart = target; - return result; -} - -} - -/* --------------------------------------------------------------------- - - Note A. - The fall-through switches in UTF-8 reading code save a - temp variable, some decrements & conditionals. The switches - are equivalent to the following loop: - { - int tmpBytesToRead = extraBytesToRead+1; - do { - ch += *source++; - --tmpBytesToRead; - if (tmpBytesToRead) ch <<= 6; - } while (tmpBytesToRead > 0); - } - In UTF-8 writing code, the switches on "bytesToWrite" are - similarly unrolled loops. - - --------------------------------------------------------------------- */ diff --git a/src/linenoise/ConvertUTF.h b/src/linenoise/ConvertUTF.h deleted file mode 100755 index 8a296235..00000000 --- a/src/linenoise/ConvertUTF.h +++ /dev/null @@ -1,162 +0,0 @@ -/* - * Copyright 2001-2004 Unicode, Inc. - * - * Disclaimer - * - * This source code is provided as is by Unicode, Inc. No claims are - * made as to fitness for any particular purpose. No warranties of any - * kind are expressed or implied. The recipient agrees to determine - * applicability of information provided. If this file has been - * purchased on magnetic or optical media from Unicode, Inc., the - * sole remedy for any claim will be exchange of defective media - * within 90 days of receipt. - * - * Limitations on Rights to Redistribute This Code - * - * Unicode, Inc. hereby grants the right to freely use the information - * supplied in this file in the creation of products supporting the - * Unicode Standard, and to make copies of this file in any form - * for internal or external distribution as long as this notice - * remains attached. - */ - -/* --------------------------------------------------------------------- - - Conversions between UTF32, UTF-16, and UTF-8. Header file. - - Several funtions are included here, forming a complete set of - conversions between the three formats. UTF-7 is not included - here, but is handled in a separate source file. - - Each of these routines takes pointers to input buffers and output - buffers. The input buffers are const. - - Each routine converts the text between *sourceStart and sourceEnd, - putting the result into the buffer between *targetStart and - targetEnd. Note: the end pointers are *after* the last item: e.g. - *(sourceEnd - 1) is the last item. - - The return result indicates whether the conversion was successful, - and if not, whether the problem was in the source or target buffers. - (Only the first encountered problem is indicated.) - - After the conversion, *sourceStart and *targetStart are both - updated to point to the end of last text successfully converted in - the respective buffers. - - Input parameters: - sourceStart - pointer to a pointer to the source buffer. - The contents of this are modified on return so that - it points at the next thing to be converted. - targetStart - similarly, pointer to pointer to the target buffer. - sourceEnd, targetEnd - respectively pointers to the ends of the - two buffers, for overflow checking only. - - These conversion functions take a ConversionFlags argument. When this - flag is set to strict, both irregular sequences and isolated surrogates - will cause an error. When the flag is set to lenient, both irregular - sequences and isolated surrogates are converted. - - Whether the flag is strict or lenient, all illegal sequences will cause - an error return. This includes sequences such as: , , - or in UTF-8, and values above 0x10FFFF in UTF-32. Conformant code - must check for illegal sequences. - - When the flag is set to lenient, characters over 0x10FFFF are converted - to the replacement character; otherwise (when the flag is set to strict) - they constitute an error. - - Output parameters: - The value "sourceIllegal" is returned from some routines if the input - sequence is malformed. When "sourceIllegal" is returned, the source - value will point to the illegal value that caused the problem. E.g., - in UTF-8 when a sequence is malformed, it points to the start of the - malformed sequence. - - Author: Mark E. Davis, 1994. - Rev History: Rick McGowan, fixes & updates May 2001. - Fixes & updates, Sept 2001. - ------------------------------------------------------------------------- */ - -/* --------------------------------------------------------------------- - The following 4 definitions are compiler-specific. - The C standard does not guarantee that wchar_t has at least - 16 bits, so wchar_t is no less portable than unsigned short! - All should be unsigned values to avoid sign extension during - bit mask & shift operations. ------------------------------------------------------------------------- */ - -#if 0 -typedef unsigned long UTF32; /* at least 32 bits */ -typedef unsigned short UTF16; /* at least 16 bits */ -typedef unsigned char UTF8; /* typically 8 bits */ -#endif - -#include -#include - -namespace linenoise_ng { - -typedef uint32_t UTF32; -typedef uint16_t UTF16; -typedef uint8_t UTF8; -typedef unsigned char Boolean; /* 0 or 1 */ - -/* Some fundamental constants */ -#define UNI_REPLACEMENT_CHAR (UTF32)0x0000FFFD -#define UNI_MAX_BMP (UTF32)0x0000FFFF -#define UNI_MAX_UTF16 (UTF32)0x0010FFFF -#define UNI_MAX_UTF32 (UTF32)0x7FFFFFFF -#define UNI_MAX_LEGAL_UTF32 (UTF32)0x0010FFFF - -typedef enum { - conversionOK, /* conversion successful */ - sourceExhausted, /* partial character in source, but hit end */ - targetExhausted, /* insuff. room in target for conversion */ - sourceIllegal /* source sequence is illegal/malformed */ -} ConversionResult; - -typedef enum { - strictConversion = 0, - lenientConversion -} ConversionFlags; - -// /* This is for C++ and does no harm in C */ -// #ifdef __cplusplus -// extern "C" { -// #endif - -ConversionResult ConvertUTF8toUTF16 ( - const UTF8** sourceStart, const UTF8* sourceEnd, - UTF16** targetStart, UTF16* targetEnd, ConversionFlags flags); - -ConversionResult ConvertUTF16toUTF8 ( - const UTF16** sourceStart, const UTF16* sourceEnd, - UTF8** targetStart, UTF8* targetEnd, ConversionFlags flags); - -ConversionResult ConvertUTF8toUTF32 ( - const UTF8** sourceStart, const UTF8* sourceEnd, - UTF32** targetStart, UTF32* targetEnd, ConversionFlags flags); - -ConversionResult ConvertUTF32toUTF8 ( - const UTF32** sourceStart, const UTF32* sourceEnd, - UTF8** targetStart, UTF8* targetEnd, ConversionFlags flags); - -ConversionResult ConvertUTF16toUTF32 ( - const UTF16** sourceStart, const UTF16* sourceEnd, - UTF32** targetStart, UTF32* targetEnd, ConversionFlags flags); - -ConversionResult ConvertUTF32toUTF16 ( - const UTF32** sourceStart, const UTF32* sourceEnd, - char16_t** targetStart, char16_t* targetEnd, ConversionFlags flags); - -Boolean isLegalUTF8Sequence(const UTF8 *source, const UTF8 *sourceEnd); - -// #ifdef __cplusplus -// } -// #endif - -} - -/* --------------------------------------------------------------------- */ diff --git a/src/linenoise/LICENSE b/src/linenoise/LICENSE deleted file mode 100644 index b7c58c44..00000000 --- a/src/linenoise/LICENSE +++ /dev/null @@ -1,66 +0,0 @@ -linenoise.cpp -============= - -Copyright (c) 2010, Salvatore Sanfilippo -Copyright (c) 2010, Pieter Noordhuis - -All rights reserved. - -Redistribution and use in source and binary forms, with or without -modification, are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - * Neither the name of Redis nor the names of its contributors may be used - to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" -AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE -LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR -CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF -SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS -INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN -CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) -ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -POSSIBILITY OF SUCH DAMAGE. - - -wcwidth.cpp -=========== - -Markus Kuhn -- 2007-05-26 (Unicode 5.0) - -Permission to use, copy, modify, and distribute this software -for any purpose and without fee is hereby granted. The author -disclaims all warranties with regard to this software. - - - -ConvertUTF.cpp -============== - -Copyright 2001-2004 Unicode, Inc. - -Disclaimer - -This source code is provided as is by Unicode, Inc. No claims are -made as to fitness for any particular purpose. No warranties of any -kind are expressed or implied. The recipient agrees to determine -applicability of information provided. If this file has been -purchased on magnetic or optical media from Unicode, Inc., the -sole remedy for any claim will be exchange of defective media -within 90 days of receipt. - -Limitations on Rights to Redistribute This Code - -Unicode, Inc. hereby grants the right to freely use the information -supplied in this file in the creation of products supporting the -Unicode Standard, and to make copies of this file in any form -for internal or external distribution as long as this notice -remains attached. diff --git a/src/linenoise/linenoise.cpp b/src/linenoise/linenoise.cpp deleted file mode 100644 index c57505d2..00000000 --- a/src/linenoise/linenoise.cpp +++ /dev/null @@ -1,3450 +0,0 @@ -/* linenoise.c -- guerrilla line editing library against the idea that a - * line editing lib needs to be 20,000 lines of C code. - * - * Copyright (c) 2010, Salvatore Sanfilippo - * Copyright (c) 2010, Pieter Noordhuis - * - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * * Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Redis nor the names of its contributors may be used - * to endorse or promote products derived from this software without - * specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE - * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - * line editing lib needs to be 20,000 lines of C code. - * - * You can find the latest source code at: - * - * http://github.com/antirez/linenoise - * - * Does a number of crazy assumptions that happen to be true in 99.9999% of - * the 2010 UNIX computers around. - * - * References: - * - http://invisible-island.net/xterm/ctlseqs/ctlseqs.html - * - http://www.3waylabs.com/nw/WWW/products/wizcon/vt220.html - * - * Todo list: - * - Switch to gets() if $TERM is something we can't support. - * - Filter bogus Ctrl+ combinations. - * - Win32 support - * - * Bloat: - * - Completion? - * - History search like Ctrl+r in readline? - * - * List of escape sequences used by this program, we do everything just - * with three sequences. In order to be so cheap we may have some - * flickering effect with some slow terminal, but the lesser sequences - * the more compatible. - * - * CHA (Cursor Horizontal Absolute) - * Sequence: ESC [ n G - * Effect: moves cursor to column n (1 based) - * - * EL (Erase Line) - * Sequence: ESC [ n K - * Effect: if n is 0 or missing, clear from cursor to end of line - * Effect: if n is 1, clear from beginning of line to cursor - * Effect: if n is 2, clear entire line - * - * CUF (Cursor Forward) - * Sequence: ESC [ n C - * Effect: moves cursor forward of n chars - * - * The following are used to clear the screen: ESC [ H ESC [ 2 J - * This is actually composed of two sequences: - * - * cursorhome - * Sequence: ESC [ H - * Effect: moves the cursor to upper left corner - * - * ED2 (Clear entire screen) - * Sequence: ESC [ 2 J - * Effect: clear the whole screen - * - */ - -#ifdef _WIN32 - -#include -#include -#include - -#if defined(_MSC_VER) && _MSC_VER < 1900 -#define snprintf _snprintf // Microsoft headers use underscores in some names -#endif - -#if !defined GNUC -#define strcasecmp _stricmp -#endif - -#define strdup _strdup -#define isatty _isatty -#define write _write -#define STDIN_FILENO 0 - -#else /* _WIN32 */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#endif /* _WIN32 */ - -#include -#include -#include - -#include "linenoise.h" -#include "ConvertUTF.h" - -#include -#include -#include - -using std::string; -using std::vector; -using std::unique_ptr; -using namespace linenoise_ng; - -typedef unsigned char char8_t; - -static ConversionResult copyString8to32(char32_t* dst, size_t dstSize, - size_t& dstCount, const char* src) { - const UTF8* sourceStart = reinterpret_cast(src); - const UTF8* sourceEnd = sourceStart + strlen(src); - UTF32* targetStart = reinterpret_cast(dst); - UTF32* targetEnd = targetStart + dstSize; - - ConversionResult res = ConvertUTF8toUTF32( - &sourceStart, sourceEnd, &targetStart, targetEnd, lenientConversion); - - if (res == conversionOK) { - dstCount = targetStart - reinterpret_cast(dst); - - if (dstCount < dstSize) { - *targetStart = 0; - } - } - - return res; -} - -static ConversionResult copyString8to32(char32_t* dst, size_t dstSize, - size_t& dstCount, const char8_t* src) { - return copyString8to32(dst, dstSize, dstCount, - reinterpret_cast(src)); -} - -static size_t strlen32(const char32_t* str) { - const char32_t* ptr = str; - - while (*ptr) { - ++ptr; - } - - return ptr - str; -} - -static size_t strlen8(const char8_t* str) { - return strlen(reinterpret_cast(str)); -} - -static char8_t* strdup8(const char* src) { - return reinterpret_cast(strdup(src)); -} - -#ifdef _WIN32 -static const int FOREGROUND_WHITE = - FOREGROUND_RED | FOREGROUND_GREEN | FOREGROUND_BLUE; -static const int BACKGROUND_WHITE = - BACKGROUND_RED | BACKGROUND_GREEN | BACKGROUND_BLUE; -static const int INTENSITY = FOREGROUND_INTENSITY | BACKGROUND_INTENSITY; - -class WinAttributes { - public: - WinAttributes() { - CONSOLE_SCREEN_BUFFER_INFO info; - GetConsoleScreenBufferInfo(GetStdHandle(STD_OUTPUT_HANDLE), &info); - _defaultAttribute = info.wAttributes & INTENSITY; - _defaultColor = info.wAttributes & FOREGROUND_WHITE; - _defaultBackground = info.wAttributes & BACKGROUND_WHITE; - - _consoleAttribute = _defaultAttribute; - _consoleColor = _defaultColor | _defaultBackground; - } - - public: - int _defaultAttribute; - int _defaultColor; - int _defaultBackground; - - int _consoleAttribute; - int _consoleColor; -}; - -static WinAttributes WIN_ATTR; - -static void copyString32to16(char16_t* dst, size_t dstSize, size_t* dstCount, - const char32_t* src, size_t srcSize) { - const UTF32* sourceStart = reinterpret_cast(src); - const UTF32* sourceEnd = sourceStart + srcSize; - char16_t* targetStart = reinterpret_cast(dst); - char16_t* targetEnd = targetStart + dstSize; - - ConversionResult res = ConvertUTF32toUTF16( - &sourceStart, sourceEnd, &targetStart, targetEnd, lenientConversion); - - if (res == conversionOK) { - *dstCount = targetStart - reinterpret_cast(dst); - - if (*dstCount < dstSize) { - *targetStart = 0; - } - } -} -#endif - -static void copyString32to8(char* dst, size_t dstSize, size_t* dstCount, - const char32_t* src, size_t srcSize) { - const UTF32* sourceStart = reinterpret_cast(src); - const UTF32* sourceEnd = sourceStart + srcSize; - UTF8* targetStart = reinterpret_cast(dst); - UTF8* targetEnd = targetStart + dstSize; - - ConversionResult res = ConvertUTF32toUTF8( - &sourceStart, sourceEnd, &targetStart, targetEnd, lenientConversion); - - if (res == conversionOK) { - *dstCount = targetStart - reinterpret_cast(dst); - - if (*dstCount < dstSize) { - *targetStart = 0; - } - } -} - -static void copyString32to8(char* dst, size_t dstLen, const char32_t* src) { - size_t dstCount = 0; - copyString32to8(dst, dstLen, &dstCount, src, strlen32(src)); -} - -static void copyString32(char32_t* dst, const char32_t* src, size_t len) { - while (0 < len && *src) { - *dst++ = *src++; - --len; - } - - *dst = 0; -} - -static int strncmp32(const char32_t* left, const char32_t* right, size_t len) { - while (0 < len && *left) { - if (*left != *right) { - return *left - *right; - } - - ++left; - ++right; - --len; - } - - return 0; -} - -#ifdef _WIN32 -#include - -static size_t OutputWin(char16_t* text16, char32_t* text32, size_t len32) { - size_t count16 = 0; - - copyString32to16(text16, len32, &count16, text32, len32); - WriteConsoleW(GetStdHandle(STD_OUTPUT_HANDLE), text16, - static_cast(count16), nullptr, nullptr); - - return count16; -} - -static char32_t* HandleEsc(char32_t* p, char32_t* end) { - if (*p == '[') { - int code = 0; - - for (++p; p < end; ++p) { - char32_t c = *p; - - if ('0' <= c && c <= '9') { - code = code * 10 + (c - '0'); - } else if (c == 'm' || c == ';') { - switch (code) { - case 0: - WIN_ATTR._consoleAttribute = WIN_ATTR._defaultAttribute; - WIN_ATTR._consoleColor = - WIN_ATTR._defaultColor | WIN_ATTR._defaultBackground; - break; - - case 1: // BOLD - case 5: // BLINK - WIN_ATTR._consoleAttribute = - (WIN_ATTR._defaultAttribute ^ FOREGROUND_INTENSITY) & INTENSITY; - break; - - case 30: - WIN_ATTR._consoleColor = BACKGROUND_WHITE; - break; - - case 31: - WIN_ATTR._consoleColor = - FOREGROUND_RED | WIN_ATTR._defaultBackground; - break; - - case 32: - WIN_ATTR._consoleColor = - FOREGROUND_GREEN | WIN_ATTR._defaultBackground; - break; - - case 33: - WIN_ATTR._consoleColor = - FOREGROUND_RED | FOREGROUND_GREEN | WIN_ATTR._defaultBackground; - break; - - case 34: - WIN_ATTR._consoleColor = - FOREGROUND_BLUE | WIN_ATTR._defaultBackground; - break; - - case 35: - WIN_ATTR._consoleColor = - FOREGROUND_BLUE | FOREGROUND_RED | WIN_ATTR._defaultBackground; - break; - - case 36: - WIN_ATTR._consoleColor = FOREGROUND_BLUE | FOREGROUND_GREEN | - WIN_ATTR._defaultBackground; - break; - - case 37: - WIN_ATTR._consoleColor = FOREGROUND_GREEN | FOREGROUND_RED | - FOREGROUND_BLUE | - WIN_ATTR._defaultBackground; - break; - } - - code = 0; - } - - if (*p == 'm') { - ++p; - break; - } - } - } else { - ++p; - } - - auto handle = GetStdHandle(STD_OUTPUT_HANDLE); - SetConsoleTextAttribute(handle, - WIN_ATTR._consoleAttribute | WIN_ATTR._consoleColor); - - return p; -} - -static size_t WinWrite32(char16_t* text16, char32_t* text32, size_t len32) { - char32_t* p = text32; - char32_t* q = p; - char32_t* e = text32 + len32; - size_t count16 = 0; - - while (p < e) { - if (*p == 27) { - if (q < p) { - count16 += OutputWin(text16, q, p - q); - } - - q = p = HandleEsc(p + 1, e); - } else { - ++p; - } - } - - if (q < p) { - count16 += OutputWin(text16, q, p - q); - } - - return count16; -} -#endif - -static int write32(int fd, char32_t* text32, int len32) { -#ifdef _WIN32 - if (isatty(fd)) { - size_t len16 = 2 * len32 + 1; - unique_ptr text16(new char16_t[len16]); - size_t count16 = WinWrite32(text16.get(), text32, len32); - - return static_cast(count16); - } else { - size_t len8 = 4 * len32 + 1; - unique_ptr text8(new char[len8]); - size_t count8 = 0; - - copyString32to8(text8.get(), len8, &count8, text32, len32); - - return write(fd, text8.get(), static_cast(count8)); - } -#else - size_t len8 = 4 * len32 + 1; - unique_ptr text8(new char[len8]); - size_t count8 = 0; - - copyString32to8(text8.get(), len8, &count8, text32, len32); - - return write(fd, text8.get(), count8); -#endif -} - -class Utf32String { - public: - Utf32String() : _length(0), _data(nullptr) { - // note: parens intentional, _data must be properly initialized - _data = new char32_t[1](); - } - - explicit Utf32String(const char* src) : _length(0), _data(nullptr) { - size_t len = strlen(src); - // note: parens intentional, _data must be properly initialized - _data = new char32_t[len + 1](); - copyString8to32(_data, len + 1, _length, src); - } - - explicit Utf32String(const char8_t* src) : _length(0), _data(nullptr) { - size_t len = strlen(reinterpret_cast(src)); - // note: parens intentional, _data must be properly initialized - _data = new char32_t[len + 1](); - copyString8to32(_data, len + 1, _length, src); - } - - explicit Utf32String(const char32_t* src) : _length(0), _data(nullptr) { - for (_length = 0; src[_length] != 0; ++_length) { - } - - // note: parens intentional, _data must be properly initialized - _data = new char32_t[_length + 1](); - memcpy(_data, src, _length * sizeof(char32_t)); - } - - explicit Utf32String(const char32_t* src, int len) : _length(len), _data(nullptr) { - // note: parens intentional, _data must be properly initialized - _data = new char32_t[len + 1](); - memcpy(_data, src, len * sizeof(char32_t)); - } - - explicit Utf32String(int len) : _length(0), _data(nullptr) { - // note: parens intentional, _data must be properly initialized - _data = new char32_t[len](); - } - - explicit Utf32String(const Utf32String& that) : _length(that._length), _data(nullptr) { - // note: parens intentional, _data must be properly initialized - _data = new char32_t[_length + 1](); - memcpy(_data, that._data, sizeof(char32_t) * _length); - } - - Utf32String& operator=(const Utf32String& that) { - if (this != &that) { - delete[] _data; - _data = new char32_t[that._length](); - _length = that._length; - memcpy(_data, that._data, sizeof(char32_t) * _length); - } - - return *this; - } - - ~Utf32String() { delete[] _data; } - - public: - char32_t* get() const { return _data; } - - size_t length() const { return _length; } - - size_t chars() const { return _length; } - - void initFromBuffer() { - for (_length = 0; _data[_length] != 0; ++_length) { - } - } - - const char32_t& operator[](size_t pos) const { return _data[pos]; } - - char32_t& operator[](size_t pos) { return _data[pos]; } - - private: - size_t _length; - char32_t* _data; -}; - -class Utf8String { - Utf8String(const Utf8String&) = delete; - Utf8String& operator=(const Utf8String&) = delete; - - public: - explicit Utf8String(const Utf32String& src) { - size_t len = src.length() * 4 + 1; - _data = new char[len]; - copyString32to8(_data, len, src.get()); - } - - ~Utf8String() { delete[] _data; } - - public: - char* get() const { return _data; } - - private: - char* _data; -}; - -struct linenoiseCompletions { - vector completionStrings; -}; - -#define LINENOISE_DEFAULT_HISTORY_MAX_LEN 100 -#define LINENOISE_MAX_LINE 4096 - -// make control-characters more readable -#define ctrlChar(upperCaseASCII) (upperCaseASCII - 0x40) - -/** - * Recompute widths of all characters in a char32_t buffer - * @param text input buffer of Unicode characters - * @param widths output buffer of character widths - * @param charCount number of characters in buffer - */ -namespace linenoise_ng { -int mk_wcwidth(char32_t ucs); -} - -static void recomputeCharacterWidths(const char32_t* text, char* widths, - int charCount) { - for (int i = 0; i < charCount; ++i) { - widths[i] = mk_wcwidth(text[i]); - } -} - -/** - * Calculate a new screen position given a starting position, screen width and - * character count - * @param x initial x position (zero-based) - * @param y initial y position (zero-based) - * @param screenColumns screen column count - * @param charCount character positions to advance - * @param xOut returned x position (zero-based) - * @param yOut returned y position (zero-based) - */ -static void calculateScreenPosition(int x, int y, int screenColumns, - int charCount, int& xOut, int& yOut) { - xOut = x; - yOut = y; - int charsRemaining = charCount; - while (charsRemaining > 0) { - int charsThisRow = (x + charsRemaining < screenColumns) ? charsRemaining - : screenColumns - x; - xOut = x + charsThisRow; - yOut = y; - charsRemaining -= charsThisRow; - x = 0; - ++y; - } - if (xOut == screenColumns) { // we have to special-case line wrap - xOut = 0; - ++yOut; - } -} - -/** - * Calculate a column width using mk_wcswidth() - * @param buf32 text to calculate - * @param len length of text to calculate - */ -namespace linenoise_ng { -int mk_wcswidth(const char32_t* pwcs, size_t n); -} - -static int calculateColumnPosition(char32_t* buf32, int len) { - int width = mk_wcswidth(reinterpret_cast(buf32), len); - if (width == -1) - return len; - else - return width; -} - -static bool isControlChar(char32_t testChar) { - return (testChar < ' ') || // C0 controls - (testChar >= 0x7F && testChar <= 0x9F); // DEL and C1 controls -} - -struct PromptBase { // a convenience struct for grouping prompt info - Utf32String promptText; // our copy of the prompt text, edited - char* promptCharWidths; // character widths from mk_wcwidth() - int promptChars; // chars in promptText - int promptBytes; // bytes in promptText - int promptExtraLines; // extra lines (beyond 1) occupied by prompt - int promptIndentation; // column offset to end of prompt - int promptLastLinePosition; // index into promptText where last line begins - int promptPreviousInputLen; // promptChars of previous input line, for - // clearing - int promptCursorRowOffset; // where the cursor is relative to the start of - // the prompt - int promptScreenColumns; // width of screen in columns - int promptPreviousLen; // help erasing - int promptErrorCode; // error code (invalid UTF-8) or zero - - PromptBase() : promptPreviousInputLen(0) {} - - bool write() { - if (write32(1, promptText.get(), promptBytes) == -1) return false; - - return true; - } -}; - -struct PromptInfo : public PromptBase { - PromptInfo(const char* textPtr, int columns) { - promptExtraLines = 0; - promptLastLinePosition = 0; - promptPreviousLen = 0; - promptScreenColumns = columns; - Utf32String tempUnicode(textPtr); - - // strip control characters from the prompt -- we do allow newline - char32_t* pIn = tempUnicode.get(); - char32_t* pOut = pIn; - - int len = 0; - int x = 0; - - bool const strip = (isatty(1) == 0); - - while (*pIn) { - char32_t c = *pIn; - if ('\n' == c || !isControlChar(c)) { - *pOut = c; - ++pOut; - ++pIn; - ++len; - if ('\n' == c || ++x >= promptScreenColumns) { - x = 0; - ++promptExtraLines; - promptLastLinePosition = len; - } - } else if (c == '\x1b') { - if (strip) { - // jump over control chars - ++pIn; - if (*pIn == '[') { - ++pIn; - while (*pIn && ((*pIn == ';') || ((*pIn >= '0' && *pIn <= '9')))) { - ++pIn; - } - if (*pIn == 'm') { - ++pIn; - } - } - } else { - // copy control chars - *pOut = *pIn; - ++pOut; - ++pIn; - if (*pIn == '[') { - *pOut = *pIn; - ++pOut; - ++pIn; - while (*pIn && ((*pIn == ';') || ((*pIn >= '0' && *pIn <= '9')))) { - *pOut = *pIn; - ++pOut; - ++pIn; - } - if (*pIn == 'm') { - *pOut = *pIn; - ++pOut; - ++pIn; - } - } - } - } else { - ++pIn; - } - } - *pOut = 0; - promptChars = len; - promptBytes = static_cast(pOut - tempUnicode.get()); - promptText = tempUnicode; - - promptIndentation = len - promptLastLinePosition; - promptCursorRowOffset = promptExtraLines; - } -}; - -// Used with DynamicPrompt (history search) -// -static const Utf32String forwardSearchBasePrompt("(i-search)`"); -static const Utf32String reverseSearchBasePrompt("(reverse-i-search)`"); -static const Utf32String endSearchBasePrompt("': "); -static Utf32String - previousSearchText; // remembered across invocations of linenoise() - -// changing prompt for "(reverse-i-search)`text':" etc. -// -struct DynamicPrompt : public PromptBase { - Utf32String searchText; // text we are searching for - char* searchCharWidths; // character widths from mk_wcwidth() - int searchTextLen; // chars in searchText - int direction; // current search direction, 1=forward, -1=reverse - - DynamicPrompt(PromptBase& pi, int initialDirection) - : searchTextLen(0), direction(initialDirection) { - promptScreenColumns = pi.promptScreenColumns; - promptCursorRowOffset = 0; - Utf32String emptyString(1); - searchText = emptyString; - const Utf32String* basePrompt = - (direction > 0) ? &forwardSearchBasePrompt : &reverseSearchBasePrompt; - size_t promptStartLength = basePrompt->length(); - promptChars = - static_cast(promptStartLength + endSearchBasePrompt.length()); - promptBytes = promptChars; - promptLastLinePosition = promptChars; // TODO fix this, we are asssuming - // that the history prompt won't wrap - // (!) - promptPreviousLen = promptChars; - Utf32String tempUnicode(promptChars + 1); - memcpy(tempUnicode.get(), basePrompt->get(), - sizeof(char32_t) * promptStartLength); - memcpy(&tempUnicode[promptStartLength], endSearchBasePrompt.get(), - sizeof(char32_t) * (endSearchBasePrompt.length() + 1)); - tempUnicode.initFromBuffer(); - promptText = tempUnicode; - calculateScreenPosition(0, 0, pi.promptScreenColumns, promptChars, - promptIndentation, promptExtraLines); - } - - void updateSearchPrompt(void) { - const Utf32String* basePrompt = - (direction > 0) ? &forwardSearchBasePrompt : &reverseSearchBasePrompt; - size_t promptStartLength = basePrompt->length(); - promptChars = static_cast(promptStartLength + searchTextLen + - endSearchBasePrompt.length()); - promptBytes = promptChars; - Utf32String tempUnicode(promptChars + 1); - memcpy(tempUnicode.get(), basePrompt->get(), - sizeof(char32_t) * promptStartLength); - memcpy(&tempUnicode[promptStartLength], searchText.get(), - sizeof(char32_t) * searchTextLen); - size_t endIndex = promptStartLength + searchTextLen; - memcpy(&tempUnicode[endIndex], endSearchBasePrompt.get(), - sizeof(char32_t) * (endSearchBasePrompt.length() + 1)); - tempUnicode.initFromBuffer(); - promptText = tempUnicode; - } - - void updateSearchText(const char32_t* textPtr) { - Utf32String tempUnicode(textPtr); - searchTextLen = static_cast(tempUnicode.chars()); - searchText = tempUnicode; - updateSearchPrompt(); - } -}; - -class KillRing { - static const int capacity = 10; - int size; - int index; - char indexToSlot[10]; - vector theRing; - - public: - enum action { actionOther, actionKill, actionYank }; - action lastAction; - size_t lastYankSize; - - KillRing() : size(0), index(0), lastAction(actionOther) { - theRing.reserve(capacity); - } - - void kill(const char32_t* text, int textLen, bool forward) { - if (textLen == 0) { - return; - } - Utf32String killedText(text, textLen); - if (lastAction == actionKill && size > 0) { - int slot = indexToSlot[0]; - int currentLen = static_cast(theRing[slot].length()); - int resultLen = currentLen + textLen; - Utf32String temp(resultLen + 1); - if (forward) { - memcpy(temp.get(), theRing[slot].get(), currentLen * sizeof(char32_t)); - memcpy(&temp[currentLen], killedText.get(), textLen * sizeof(char32_t)); - } else { - memcpy(temp.get(), killedText.get(), textLen * sizeof(char32_t)); - memcpy(&temp[textLen], theRing[slot].get(), - currentLen * sizeof(char32_t)); - } - temp[resultLen] = 0; - temp.initFromBuffer(); - theRing[slot] = temp; - } else { - if (size < capacity) { - if (size > 0) { - memmove(&indexToSlot[1], &indexToSlot[0], size); - } - indexToSlot[0] = size; - size++; - theRing.push_back(killedText); - } else { - int slot = indexToSlot[capacity - 1]; - theRing[slot] = killedText; - memmove(&indexToSlot[1], &indexToSlot[0], capacity - 1); - indexToSlot[0] = slot; - } - index = 0; - } - } - - Utf32String* yank() { return (size > 0) ? &theRing[indexToSlot[index]] : 0; } - - Utf32String* yankPop() { - if (size == 0) { - return 0; - } - ++index; - if (index == size) { - index = 0; - } - return &theRing[indexToSlot[index]]; - } -}; - -class InputBuffer { - char32_t* buf32; // input buffer - char* charWidths; // character widths from mk_wcwidth() - int buflen; // buffer size in characters - int len; // length of text in input buffer - int pos; // character position in buffer ( 0 <= pos <= len ) - - void clearScreen(PromptBase& pi); - int incrementalHistorySearch(PromptBase& pi, int startChar); - int completeLine(PromptBase& pi); - void refreshLine(PromptBase& pi); - - public: - InputBuffer(char32_t* buffer, char* widthArray, int bufferLen) - : buf32(buffer), - charWidths(widthArray), - buflen(bufferLen - 1), - len(0), - pos(0) { - buf32[0] = 0; - } - void preloadBuffer(const char* preloadText) { - size_t ucharCount = 0; - copyString8to32(buf32, buflen + 1, ucharCount, preloadText); - recomputeCharacterWidths(buf32, charWidths, static_cast(ucharCount)); - len = static_cast(ucharCount); - pos = static_cast(ucharCount); - } - int getInputLine(PromptBase& pi); - int length(void) const { return len; } -}; - -// Special codes for keyboard input: -// -// Between Windows and the various Linux "terminal" programs, there is some -// pretty diverse behavior in the "scan codes" and escape sequences we are -// presented with. So ... we'll translate them all into our own pidgin -// pseudocode, trying to stay out of the way of UTF-8 and international -// characters. Here's the general plan. -// -// "User input keystrokes" (key chords, whatever) will be encoded as a single -// value. -// The low 21 bits are reserved for Unicode characters. Popular function-type -// keys -// get their own codes in the range 0x10200000 to (if needed) 0x1FE00000, -// currently -// just arrow keys, Home, End and Delete. Keypresses with Ctrl get ORed with -// 0x20000000, with Alt get ORed with 0x40000000. So, Ctrl+Alt+Home is encoded -// as 0x20000000 + 0x40000000 + 0x10A00000 == 0x70A00000. To keep things -// complicated, -// the Alt key is equivalent to prefixing the keystroke with ESC, so ESC -// followed by -// D is treated the same as Alt + D ... we'll just use Emacs terminology and -// call -// this "Meta". So, we will encode both ESC followed by D and Alt held down -// while D -// is pressed the same, as Meta-D, encoded as 0x40000064. -// -// Here are the definitions of our component constants: -// -// Maximum unsigned 32-bit value = 0xFFFFFFFF; // For reference, max 32-bit -// value -// Highest allocated Unicode char = 0x001FFFFF; // For reference, max -// Unicode value -static const int META = 0x40000000; // Meta key combination -static const int CTRL = 0x20000000; // Ctrl key combination -// static const int SPECIAL_KEY = 0x10000000; // Common bit for all special -// keys -static const int UP_ARROW_KEY = 0x10200000; // Special keys -static const int DOWN_ARROW_KEY = 0x10400000; -static const int RIGHT_ARROW_KEY = 0x10600000; -static const int LEFT_ARROW_KEY = 0x10800000; -static const int HOME_KEY = 0x10A00000; -static const int END_KEY = 0x10C00000; -static const int DELETE_KEY = 0x10E00000; -static const int PAGE_UP_KEY = 0x11000000; -static const int PAGE_DOWN_KEY = 0x11200000; - -static const char* unsupported_term[] = {"dumb", "cons25", "emacs", NULL}; -static linenoiseCompletionCallback* completionCallback = NULL; - -#ifdef _WIN32 -static HANDLE console_in, console_out; -static DWORD oldMode; -static WORD oldDisplayAttribute; -#else -static struct termios orig_termios; /* in order to restore at exit */ -#endif - -static KillRing killRing; - -static int rawmode = 0; /* for atexit() function to check if restore is needed*/ -static int atexit_registered = 0; /* register atexit just 1 time */ -static int historyMaxLen = LINENOISE_DEFAULT_HISTORY_MAX_LEN; -static int historyLen = 0; -static int historyIndex = 0; -static char8_t** history = NULL; - -// used to emulate Windows command prompt on down-arrow after a recall -// we use -2 as our "not set" value because we add 1 to the previous index on -// down-arrow, -// and zero is a valid index (so -1 is a valid "previous index") -static int historyPreviousIndex = -2; -static bool historyRecallMostRecent = false; - -static void linenoiseAtExit(void); - -static bool isUnsupportedTerm(void) { - char* term = getenv("TERM"); - if (term == NULL) return false; - for (int j = 0; unsupported_term[j]; ++j) - if (!strcasecmp(term, unsupported_term[j])) { - return true; - } - return false; -} - -static void beep() { - fprintf(stderr, "\x7"); // ctrl-G == bell/beep - fflush(stderr); -} - -void linenoiseHistoryFree(void) { - if (history) { - for (int j = 0; j < historyLen; ++j) free(history[j]); - historyLen = 0; - free(history); - history = 0; - } -} - -static int enableRawMode(void) { -#ifdef _WIN32 - if (!console_in) { - console_in = GetStdHandle(STD_INPUT_HANDLE); - console_out = GetStdHandle(STD_OUTPUT_HANDLE); - - GetConsoleMode(console_in, &oldMode); - SetConsoleMode(console_in, oldMode & - ~(ENABLE_LINE_INPUT | ENABLE_ECHO_INPUT | - ENABLE_PROCESSED_INPUT)); - } - return 0; -#else - struct termios raw; - - if (!isatty(STDIN_FILENO)) goto fatal; - if (!atexit_registered) { - atexit(linenoiseAtExit); - atexit_registered = 1; - } - if (tcgetattr(0, &orig_termios) == -1) goto fatal; - - raw = orig_termios; /* modify the original mode */ - /* input modes: no break, no CR to NL, no parity check, no strip char, - * no start/stop output control. */ - raw.c_iflag &= ~(BRKINT | ICRNL | INPCK | ISTRIP | IXON); - /* output modes - disable post processing */ - // this is wrong, we don't want raw output, it turns newlines into straight - // linefeeds - // raw.c_oflag &= ~(OPOST); - /* control modes - set 8 bit chars */ - raw.c_cflag |= (CS8); - /* local modes - echoing off, canonical off, no extended functions, - * no signal chars (^Z,^C) */ - raw.c_lflag &= ~(ECHO | ICANON | IEXTEN | ISIG); - /* control chars - set return condition: min number of bytes and timer. - * We want read to return every single byte, without timeout. */ - raw.c_cc[VMIN] = 1; - raw.c_cc[VTIME] = 0; /* 1 byte, no timer */ - - /* put terminal in raw mode after flushing */ - if (tcsetattr(0, TCSADRAIN, &raw) < 0) goto fatal; - rawmode = 1; - return 0; - -fatal: - errno = ENOTTY; - return -1; -#endif -} - -static void disableRawMode(void) { -#ifdef _WIN32 - SetConsoleMode(console_in, oldMode); - console_in = 0; - console_out = 0; -#else - if (rawmode && tcsetattr(0, TCSADRAIN, &orig_termios) != -1) rawmode = 0; -#endif -} - -// At exit we'll try to fix the terminal to the initial conditions -static void linenoiseAtExit(void) { disableRawMode(); } - -static int getScreenColumns(void) { - int cols; -#ifdef _WIN32 - CONSOLE_SCREEN_BUFFER_INFO inf; - GetConsoleScreenBufferInfo(GetStdHandle(STD_OUTPUT_HANDLE), &inf); - cols = inf.dwSize.X; -#else - struct winsize ws; - cols = (ioctl(1, TIOCGWINSZ, &ws) == -1) ? 80 : ws.ws_col; -#endif - // cols is 0 in certain circumstances like inside debugger, which creates - // further issues - return (cols > 0) ? cols : 80; -} - -static int getScreenRows(void) { - int rows; -#ifdef _WIN32 - CONSOLE_SCREEN_BUFFER_INFO inf; - GetConsoleScreenBufferInfo(GetStdHandle(STD_OUTPUT_HANDLE), &inf); - rows = 1 + inf.srWindow.Bottom - inf.srWindow.Top; -#else - struct winsize ws; - rows = (ioctl(1, TIOCGWINSZ, &ws) == -1) ? 24 : ws.ws_row; -#endif - return (rows > 0) ? rows : 24; -} - -static void setDisplayAttribute(bool enhancedDisplay, bool error) { -#ifdef _WIN32 - if (enhancedDisplay) { - CONSOLE_SCREEN_BUFFER_INFO inf; - GetConsoleScreenBufferInfo(console_out, &inf); - oldDisplayAttribute = inf.wAttributes; - BYTE oldLowByte = oldDisplayAttribute & 0xFF; - BYTE newLowByte; - switch (oldLowByte) { - case 0x07: - // newLowByte = FOREGROUND_BLUE | FOREGROUND_INTENSITY; // too dim - // newLowByte = FOREGROUND_BLUE; // even dimmer - newLowByte = FOREGROUND_BLUE | - FOREGROUND_GREEN; // most similar to xterm appearance - break; - case 0x70: - newLowByte = BACKGROUND_BLUE | BACKGROUND_INTENSITY; - break; - default: - newLowByte = oldLowByte ^ 0xFF; // default to inverse video - break; - } - inf.wAttributes = (inf.wAttributes & 0xFF00) | newLowByte; - SetConsoleTextAttribute(console_out, inf.wAttributes); - } else { - SetConsoleTextAttribute(console_out, oldDisplayAttribute); - } -#else - if (enhancedDisplay) { - char const* p = (error ? "\x1b[1;31m" : "\x1b[1;34m"); - if (write(1, p, 7) == -1) - return; /* bright blue (visible with both B&W bg) */ - } else { - if (write(1, "\x1b[0m", 4) == -1) return; /* reset */ - } -#endif -} - -/** - * Display the dynamic incremental search prompt and the current user input - * line. - * @param pi PromptBase struct holding information about the prompt and our - * screen position - * @param buf32 input buffer to be displayed - * @param len count of characters in the buffer - * @param pos current cursor position within the buffer (0 <= pos <= len) - */ -static void dynamicRefresh(PromptBase& pi, char32_t* buf32, int len, int pos) { - // calculate the position of the end of the prompt - int xEndOfPrompt, yEndOfPrompt; - calculateScreenPosition(0, 0, pi.promptScreenColumns, pi.promptChars, - xEndOfPrompt, yEndOfPrompt); - pi.promptIndentation = xEndOfPrompt; - - // calculate the position of the end of the input line - int xEndOfInput, yEndOfInput; - calculateScreenPosition(xEndOfPrompt, yEndOfPrompt, pi.promptScreenColumns, - calculateColumnPosition(buf32, len), xEndOfInput, - yEndOfInput); - - // calculate the desired position of the cursor - int xCursorPos, yCursorPos; - calculateScreenPosition(xEndOfPrompt, yEndOfPrompt, pi.promptScreenColumns, - calculateColumnPosition(buf32, pos), xCursorPos, - yCursorPos); - -#ifdef _WIN32 - // position at the start of the prompt, clear to end of previous input - CONSOLE_SCREEN_BUFFER_INFO inf; - GetConsoleScreenBufferInfo(console_out, &inf); - inf.dwCursorPosition.X = 0; - inf.dwCursorPosition.Y -= pi.promptCursorRowOffset /*- pi.promptExtraLines*/; - SetConsoleCursorPosition(console_out, inf.dwCursorPosition); - DWORD count; - FillConsoleOutputCharacterA(console_out, ' ', - pi.promptPreviousLen + pi.promptPreviousInputLen, - inf.dwCursorPosition, &count); - pi.promptPreviousLen = pi.promptIndentation; - pi.promptPreviousInputLen = len; - - // display the prompt - if (!pi.write()) return; - - // display the input line - if (write32(1, buf32, len) == -1) return; - - // position the cursor - GetConsoleScreenBufferInfo(console_out, &inf); - inf.dwCursorPosition.X = xCursorPos; // 0-based on Win32 - inf.dwCursorPosition.Y -= yEndOfInput - yCursorPos; - SetConsoleCursorPosition(console_out, inf.dwCursorPosition); -#else // _WIN32 - char seq[64]; - int cursorRowMovement = pi.promptCursorRowOffset - pi.promptExtraLines; - if (cursorRowMovement > 0) { // move the cursor up as required - snprintf(seq, sizeof seq, "\x1b[%dA", cursorRowMovement); - if (write(1, seq, strlen(seq)) == -1) return; - } - // position at the start of the prompt, clear to end of screen - snprintf(seq, sizeof seq, "\x1b[1G\x1b[J"); // 1-based on VT100 - if (write(1, seq, strlen(seq)) == -1) return; - - // display the prompt - if (!pi.write()) return; - - // display the input line - if (write32(1, buf32, len) == -1) return; - - // we have to generate our own newline on line wrap - if (xEndOfInput == 0 && yEndOfInput > 0) - if (write(1, "\n", 1) == -1) return; - - // position the cursor - cursorRowMovement = yEndOfInput - yCursorPos; - if (cursorRowMovement > 0) { // move the cursor up as required - snprintf(seq, sizeof seq, "\x1b[%dA", cursorRowMovement); - if (write(1, seq, strlen(seq)) == -1) return; - } - // position the cursor within the line - snprintf(seq, sizeof seq, "\x1b[%dG", xCursorPos + 1); // 1-based on VT100 - if (write(1, seq, strlen(seq)) == -1) return; -#endif - - pi.promptCursorRowOffset = - pi.promptExtraLines + yCursorPos; // remember row for next pass -} - -/** - * Refresh the user's input line: the prompt is already onscreen and is not - * redrawn here - * @param pi PromptBase struct holding information about the prompt and our - * screen position - */ -void InputBuffer::refreshLine(PromptBase& pi) { - // check for a matching brace/bracket/paren, remember its position if found - int highlight = -1; - bool indicateError = false; - if (pos < len) { - /* this scans for a brace matching buf32[pos] to highlight */ - unsigned char part1, part2; - int scanDirection = 0; - if (strchr("}])", buf32[pos])) { - scanDirection = -1; /* backwards */ - if (buf32[pos] == '}') { - part1 = '}'; part2 = '{'; - } else if (buf32[pos] == ']') { - part1 = ']'; part2 = '['; - } else { - part1 = ')'; part2 = '('; - } - } - else if (strchr("{[(", buf32[pos])) { - scanDirection = 1; /* forwards */ - if (buf32[pos] == '{') { - //part1 = '{'; part2 = '}'; - part1 = '}'; part2 = '{'; - } else if (buf32[pos] == '[') { - //part1 = '['; part2 = ']'; - part1 = ']'; part2 = '['; - } else { - //part1 = '('; part2 = ')'; - part1 = ')'; part2 = '('; - } - } - - if (scanDirection) { - int unmatched = scanDirection; - int unmatchedOther = 0; - for (int i = pos + scanDirection; i >= 0 && i < len; i += scanDirection) { - /* TODO: the right thing when inside a string */ - if (strchr("}])", buf32[i])) { - if (buf32[i] == part1) { - --unmatched; - } else { - --unmatchedOther; - } - } else if (strchr("{[(", buf32[i])) { - if (buf32[i] == part2) { - ++unmatched; - } else { - ++unmatchedOther; - } - } -/* - if (strchr("}])", buf32[i])) - --unmatched; - else if (strchr("{[(", buf32[i])) - ++unmatched; -*/ - if (unmatched == 0) { - highlight = i; - indicateError = (unmatchedOther != 0); - break; - } - } - } - } - - // calculate the position of the end of the input line - int xEndOfInput, yEndOfInput; - calculateScreenPosition(pi.promptIndentation, 0, pi.promptScreenColumns, - calculateColumnPosition(buf32, len), xEndOfInput, - yEndOfInput); - - // calculate the desired position of the cursor - int xCursorPos, yCursorPos; - calculateScreenPosition(pi.promptIndentation, 0, pi.promptScreenColumns, - calculateColumnPosition(buf32, pos), xCursorPos, - yCursorPos); - -#ifdef _WIN32 - // position at the end of the prompt, clear to end of previous input - CONSOLE_SCREEN_BUFFER_INFO inf; - GetConsoleScreenBufferInfo(console_out, &inf); - inf.dwCursorPosition.X = pi.promptIndentation; // 0-based on Win32 - inf.dwCursorPosition.Y -= pi.promptCursorRowOffset - pi.promptExtraLines; - SetConsoleCursorPosition(console_out, inf.dwCursorPosition); - DWORD count; - if (len < pi.promptPreviousInputLen) - FillConsoleOutputCharacterA(console_out, ' ', pi.promptPreviousInputLen, - inf.dwCursorPosition, &count); - pi.promptPreviousInputLen = len; - - // display the input line - if (highlight == -1) { - if (write32(1, buf32, len) == -1) return; - } else { - if (write32(1, buf32, highlight) == -1) return; - setDisplayAttribute(true, indicateError); /* bright blue (visible with both B&W bg) */ - if (write32(1, &buf32[highlight], 1) == -1) return; - setDisplayAttribute(false, indicateError); - if (write32(1, buf32 + highlight + 1, len - highlight - 1) == -1) return; - } - - // position the cursor - GetConsoleScreenBufferInfo(console_out, &inf); - inf.dwCursorPosition.X = xCursorPos; // 0-based on Win32 - inf.dwCursorPosition.Y -= yEndOfInput - yCursorPos; - SetConsoleCursorPosition(console_out, inf.dwCursorPosition); -#else // _WIN32 - char seq[64]; - int cursorRowMovement = pi.promptCursorRowOffset - pi.promptExtraLines; - if (cursorRowMovement > 0) { // move the cursor up as required - snprintf(seq, sizeof seq, "\x1b[%dA", cursorRowMovement); - if (write(1, seq, strlen(seq)) == -1) return; - } - // position at the end of the prompt, clear to end of screen - snprintf(seq, sizeof seq, "\x1b[%dG\x1b[J", - pi.promptIndentation + 1); // 1-based on VT100 - if (write(1, seq, strlen(seq)) == -1) return; - - if (highlight == -1) { // write unhighlighted text - if (write32(1, buf32, len) == -1) return; - } else { // highlight the matching brace/bracket/parenthesis - if (write32(1, buf32, highlight) == -1) return; - setDisplayAttribute(true, indicateError); - if (write32(1, &buf32[highlight], 1) == -1) return; - setDisplayAttribute(false, indicateError); - if (write32(1, buf32 + highlight + 1, len - highlight - 1) == -1) return; - } - - // we have to generate our own newline on line wrap - if (xEndOfInput == 0 && yEndOfInput > 0) - if (write(1, "\n", 1) == -1) return; - - // position the cursor - cursorRowMovement = yEndOfInput - yCursorPos; - if (cursorRowMovement > 0) { // move the cursor up as required - snprintf(seq, sizeof seq, "\x1b[%dA", cursorRowMovement); - if (write(1, seq, strlen(seq)) == -1) return; - } - // position the cursor within the line - snprintf(seq, sizeof seq, "\x1b[%dG", xCursorPos + 1); // 1-based on VT100 - if (write(1, seq, strlen(seq)) == -1) return; -#endif - - pi.promptCursorRowOffset = - pi.promptExtraLines + yCursorPos; // remember row for next pass -} - -#ifndef _WIN32 - -/** - * Read a UTF-8 sequence from the non-Windows keyboard and return the Unicode - * (char32_t) character it - * encodes - * - * @return char32_t Unicode character - */ -static char32_t readUnicodeCharacter(void) { - static char8_t utf8String[5]; - static size_t utf8Count = 0; - while (true) { - char8_t c; - - /* Continue reading if interrupted by signal. */ - ssize_t nread; - do { - nread = read(0, &c, 1); - } while ((nread == -1) && (errno == EINTR)); - - if (nread <= 0) return 0; - if (c <= 0x7F) { // short circuit ASCII - utf8Count = 0; - return c; - } else if (utf8Count < sizeof(utf8String) - 1) { - utf8String[utf8Count++] = c; - utf8String[utf8Count] = 0; - char32_t unicodeChar[2]; - size_t ucharCount; - ConversionResult res = - copyString8to32(unicodeChar, 2, ucharCount, utf8String); - if (res == conversionOK && ucharCount) { - utf8Count = 0; - return unicodeChar[0]; - } - } else { - utf8Count = - 0; // this shouldn't happen: got four bytes but no UTF-8 character - } - } -} - -namespace EscapeSequenceProcessing { // move these out of global namespace - -// This chunk of code does parsing of the escape sequences sent by various Linux -// terminals. -// -// It handles arrow keys, Home, End and Delete keys by interpreting the -// sequences sent by -// gnome terminal, xterm, rxvt, konsole, aterm and yakuake including the Alt and -// Ctrl key -// combinations that are understood by linenoise. -// -// The parsing uses tables, a bunch of intermediate dispatch routines and a -// doDispatch -// loop that reads the tables and sends control to "deeper" routines to continue -// the -// parsing. The starting call to doDispatch( c, initialDispatch ) will -// eventually return -// either a character (with optional CTRL and META bits set), or -1 if parsing -// fails, or -// zero if an attempt to read from the keyboard fails. -// -// This is rather sloppy escape sequence processing, since we're not paying -// attention to what the -// actual TERM is set to and are processing all key sequences for all terminals, -// but it works with -// the most common keystrokes on the most common terminals. It's intricate, but -// the nested 'if' -// statements required to do it directly would be worse. This way has the -// advantage of allowing -// changes and extensions without having to touch a lot of code. - -// This is a typedef for the routine called by doDispatch(). It takes the -// current character -// as input, does any required processing including reading more characters and -// calling other -// dispatch routines, then eventually returns the final (possibly extended or -// special) character. -// -typedef char32_t (*CharacterDispatchRoutine)(char32_t); - -// This structure is used by doDispatch() to hold a list of characters to test -// for and -// a list of routines to call if the character matches. The dispatch routine -// list is one -// longer than the character list; the final entry is used if no character -// matches. -// -struct CharacterDispatch { - unsigned int len; // length of the chars list - const char* chars; // chars to test - CharacterDispatchRoutine* dispatch; // array of routines to call -}; - -// This dispatch routine is given a dispatch table and then farms work out to -// routines -// listed in the table based on the character it is called with. The dispatch -// routines can -// read more input characters to decide what should eventually be returned. -// Eventually, -// a called routine returns either a character or -1 to indicate parsing -// failure. -// -static char32_t doDispatch(char32_t c, CharacterDispatch& dispatchTable) { - for (unsigned int i = 0; i < dispatchTable.len; ++i) { - if (static_cast(dispatchTable.chars[i]) == c) { - return dispatchTable.dispatch[i](c); - } - } - return dispatchTable.dispatch[dispatchTable.len](c); -} - -static char32_t thisKeyMetaCtrl = - 0; // holds pre-set Meta and/or Ctrl modifiers - -// Final dispatch routines -- return something -// -static char32_t normalKeyRoutine(char32_t c) { return thisKeyMetaCtrl | c; } -static char32_t upArrowKeyRoutine(char32_t) { - return thisKeyMetaCtrl | UP_ARROW_KEY; -} -static char32_t downArrowKeyRoutine(char32_t) { - return thisKeyMetaCtrl | DOWN_ARROW_KEY; -} -static char32_t rightArrowKeyRoutine(char32_t) { - return thisKeyMetaCtrl | RIGHT_ARROW_KEY; -} -static char32_t leftArrowKeyRoutine(char32_t) { - return thisKeyMetaCtrl | LEFT_ARROW_KEY; -} -static char32_t homeKeyRoutine(char32_t) { return thisKeyMetaCtrl | HOME_KEY; } -static char32_t endKeyRoutine(char32_t) { return thisKeyMetaCtrl | END_KEY; } -static char32_t pageUpKeyRoutine(char32_t) { - return thisKeyMetaCtrl | PAGE_UP_KEY; -} -static char32_t pageDownKeyRoutine(char32_t) { - return thisKeyMetaCtrl | PAGE_DOWN_KEY; -} -static char32_t deleteCharRoutine(char32_t) { - return thisKeyMetaCtrl | ctrlChar('H'); -} // key labeled Backspace -static char32_t deleteKeyRoutine(char32_t) { - return thisKeyMetaCtrl | DELETE_KEY; -} // key labeled Delete -static char32_t ctrlUpArrowKeyRoutine(char32_t) { - return thisKeyMetaCtrl | CTRL | UP_ARROW_KEY; -} -static char32_t ctrlDownArrowKeyRoutine(char32_t) { - return thisKeyMetaCtrl | CTRL | DOWN_ARROW_KEY; -} -static char32_t ctrlRightArrowKeyRoutine(char32_t) { - return thisKeyMetaCtrl | CTRL | RIGHT_ARROW_KEY; -} -static char32_t ctrlLeftArrowKeyRoutine(char32_t) { - return thisKeyMetaCtrl | CTRL | LEFT_ARROW_KEY; -} -static char32_t escFailureRoutine(char32_t) { - beep(); - return -1; -} - -// Handle ESC [ 1 ; 3 (or 5) escape sequences -// -static CharacterDispatchRoutine escLeftBracket1Semicolon3or5Routines[] = { - upArrowKeyRoutine, downArrowKeyRoutine, rightArrowKeyRoutine, - leftArrowKeyRoutine, escFailureRoutine}; -static CharacterDispatch escLeftBracket1Semicolon3or5Dispatch = { - 4, "ABCD", escLeftBracket1Semicolon3or5Routines}; - -// Handle ESC [ 1 ; escape sequences -// -static char32_t escLeftBracket1Semicolon3Routine(char32_t c) { - c = readUnicodeCharacter(); - if (c == 0) return 0; - thisKeyMetaCtrl |= META; - return doDispatch(c, escLeftBracket1Semicolon3or5Dispatch); -} -static char32_t escLeftBracket1Semicolon5Routine(char32_t c) { - c = readUnicodeCharacter(); - if (c == 0) return 0; - thisKeyMetaCtrl |= CTRL; - return doDispatch(c, escLeftBracket1Semicolon3or5Dispatch); -} -static CharacterDispatchRoutine escLeftBracket1SemicolonRoutines[] = { - escLeftBracket1Semicolon3Routine, escLeftBracket1Semicolon5Routine, - escFailureRoutine}; -static CharacterDispatch escLeftBracket1SemicolonDispatch = { - 2, "35", escLeftBracket1SemicolonRoutines}; - -// Handle ESC [ 1 escape sequences -// -static char32_t escLeftBracket1SemicolonRoutine(char32_t c) { - c = readUnicodeCharacter(); - if (c == 0) return 0; - return doDispatch(c, escLeftBracket1SemicolonDispatch); -} -static CharacterDispatchRoutine escLeftBracket1Routines[] = { - homeKeyRoutine, escLeftBracket1SemicolonRoutine, escFailureRoutine}; -static CharacterDispatch escLeftBracket1Dispatch = {2, "~;", - escLeftBracket1Routines}; - -// Handle ESC [ 3 escape sequences -// -static CharacterDispatchRoutine escLeftBracket3Routines[] = {deleteKeyRoutine, - escFailureRoutine}; -static CharacterDispatch escLeftBracket3Dispatch = {1, "~", - escLeftBracket3Routines}; - -// Handle ESC [ 4 escape sequences -// -static CharacterDispatchRoutine escLeftBracket4Routines[] = {endKeyRoutine, - escFailureRoutine}; -static CharacterDispatch escLeftBracket4Dispatch = {1, "~", - escLeftBracket4Routines}; - -// Handle ESC [ 5 escape sequences -// -static CharacterDispatchRoutine escLeftBracket5Routines[] = {pageUpKeyRoutine, - escFailureRoutine}; -static CharacterDispatch escLeftBracket5Dispatch = {1, "~", - escLeftBracket5Routines}; - -// Handle ESC [ 6 escape sequences -// -static CharacterDispatchRoutine escLeftBracket6Routines[] = {pageDownKeyRoutine, - escFailureRoutine}; -static CharacterDispatch escLeftBracket6Dispatch = {1, "~", - escLeftBracket6Routines}; - -// Handle ESC [ 7 escape sequences -// -static CharacterDispatchRoutine escLeftBracket7Routines[] = {homeKeyRoutine, - escFailureRoutine}; -static CharacterDispatch escLeftBracket7Dispatch = {1, "~", - escLeftBracket7Routines}; - -// Handle ESC [ 8 escape sequences -// -static CharacterDispatchRoutine escLeftBracket8Routines[] = {endKeyRoutine, - escFailureRoutine}; -static CharacterDispatch escLeftBracket8Dispatch = {1, "~", - escLeftBracket8Routines}; - -// Handle ESC [ escape sequences -// -static char32_t escLeftBracket0Routine(char32_t c) { - return escFailureRoutine(c); -} -static char32_t escLeftBracket1Routine(char32_t c) { - c = readUnicodeCharacter(); - if (c == 0) return 0; - return doDispatch(c, escLeftBracket1Dispatch); -} -static char32_t escLeftBracket2Routine(char32_t c) { - return escFailureRoutine(c); // Insert key, unused -} -static char32_t escLeftBracket3Routine(char32_t c) { - c = readUnicodeCharacter(); - if (c == 0) return 0; - return doDispatch(c, escLeftBracket3Dispatch); -} -static char32_t escLeftBracket4Routine(char32_t c) { - c = readUnicodeCharacter(); - if (c == 0) return 0; - return doDispatch(c, escLeftBracket4Dispatch); -} -static char32_t escLeftBracket5Routine(char32_t c) { - c = readUnicodeCharacter(); - if (c == 0) return 0; - return doDispatch(c, escLeftBracket5Dispatch); -} -static char32_t escLeftBracket6Routine(char32_t c) { - c = readUnicodeCharacter(); - if (c == 0) return 0; - return doDispatch(c, escLeftBracket6Dispatch); -} -static char32_t escLeftBracket7Routine(char32_t c) { - c = readUnicodeCharacter(); - if (c == 0) return 0; - return doDispatch(c, escLeftBracket7Dispatch); -} -static char32_t escLeftBracket8Routine(char32_t c) { - c = readUnicodeCharacter(); - if (c == 0) return 0; - return doDispatch(c, escLeftBracket8Dispatch); -} -static char32_t escLeftBracket9Routine(char32_t c) { - return escFailureRoutine(c); -} - -// Handle ESC [ escape sequences -// -static CharacterDispatchRoutine escLeftBracketRoutines[] = { - upArrowKeyRoutine, downArrowKeyRoutine, rightArrowKeyRoutine, - leftArrowKeyRoutine, homeKeyRoutine, endKeyRoutine, - escLeftBracket0Routine, escLeftBracket1Routine, escLeftBracket2Routine, - escLeftBracket3Routine, escLeftBracket4Routine, escLeftBracket5Routine, - escLeftBracket6Routine, escLeftBracket7Routine, escLeftBracket8Routine, - escLeftBracket9Routine, escFailureRoutine}; -static CharacterDispatch escLeftBracketDispatch = {16, "ABCDHF0123456789", - escLeftBracketRoutines}; - -// Handle ESC O escape sequences -// -static CharacterDispatchRoutine escORoutines[] = { - upArrowKeyRoutine, downArrowKeyRoutine, rightArrowKeyRoutine, - leftArrowKeyRoutine, homeKeyRoutine, endKeyRoutine, - ctrlUpArrowKeyRoutine, ctrlDownArrowKeyRoutine, ctrlRightArrowKeyRoutine, - ctrlLeftArrowKeyRoutine, escFailureRoutine}; -static CharacterDispatch escODispatch = {10, "ABCDHFabcd", escORoutines}; - -// Initial ESC dispatch -- could be a Meta prefix or the start of an escape -// sequence -// -static char32_t escLeftBracketRoutine(char32_t c) { - c = readUnicodeCharacter(); - if (c == 0) return 0; - return doDispatch(c, escLeftBracketDispatch); -} -static char32_t escORoutine(char32_t c) { - c = readUnicodeCharacter(); - if (c == 0) return 0; - return doDispatch(c, escODispatch); -} -static char32_t setMetaRoutine(char32_t c); // need forward reference -static CharacterDispatchRoutine escRoutines[] = {escLeftBracketRoutine, - escORoutine, setMetaRoutine}; -static CharacterDispatch escDispatch = {2, "[O", escRoutines}; - -// Initial dispatch -- we are not in the middle of anything yet -// -static char32_t escRoutine(char32_t c) { - c = readUnicodeCharacter(); - if (c == 0) return 0; - return doDispatch(c, escDispatch); -} -static CharacterDispatchRoutine initialRoutines[] = { - escRoutine, deleteCharRoutine, normalKeyRoutine}; -static CharacterDispatch initialDispatch = {2, "\x1B\x7F", initialRoutines}; - -// Special handling for the ESC key because it does double duty -// -static char32_t setMetaRoutine(char32_t c) { - thisKeyMetaCtrl = META; - if (c == 0x1B) { // another ESC, stay in ESC processing mode - c = readUnicodeCharacter(); - if (c == 0) return 0; - return doDispatch(c, escDispatch); - } - return doDispatch(c, initialDispatch); -} - -} // namespace EscapeSequenceProcessing // move these out of global namespace - -#endif // #ifndef _WIN32 - -// linenoiseReadChar -- read a keystroke or keychord from the keyboard, and -// translate it -// into an encoded "keystroke". When convenient, extended keys are translated -// into their -// simpler Emacs keystrokes, so an unmodified "left arrow" becomes Ctrl-B. -// -// A return value of zero means "no input available", and a return value of -1 -// means "invalid key". -// -static char32_t linenoiseReadChar(void) { -#ifdef _WIN32 - - INPUT_RECORD rec; - DWORD count; - int modifierKeys = 0; - bool escSeen = false; - while (true) { - ReadConsoleInputW(console_in, &rec, 1, &count); -#if 0 // helper for debugging keystrokes, display info in the debug "Output" - // window in the debugger - { - if ( rec.EventType == KEY_EVENT ) { - //if ( rec.Event.KeyEvent.uChar.UnicodeChar ) { - char buf[1024]; - sprintf( - buf, - "Unicode character 0x%04X, repeat count %d, virtual keycode 0x%04X, " - "virtual scancode 0x%04X, key %s%s%s%s%s\n", - rec.Event.KeyEvent.uChar.UnicodeChar, - rec.Event.KeyEvent.wRepeatCount, - rec.Event.KeyEvent.wVirtualKeyCode, - rec.Event.KeyEvent.wVirtualScanCode, - rec.Event.KeyEvent.bKeyDown ? "down" : "up", - (rec.Event.KeyEvent.dwControlKeyState & LEFT_CTRL_PRESSED) ? - " L-Ctrl" : "", - (rec.Event.KeyEvent.dwControlKeyState & RIGHT_CTRL_PRESSED) ? - " R-Ctrl" : "", - (rec.Event.KeyEvent.dwControlKeyState & LEFT_ALT_PRESSED) ? - " L-Alt" : "", - (rec.Event.KeyEvent.dwControlKeyState & RIGHT_ALT_PRESSED) ? - " R-Alt" : "" - ); - OutputDebugStringA( buf ); - //} - } - } -#endif - if (rec.EventType != KEY_EVENT) { - continue; - } - // Windows provides for entry of characters that are not on your keyboard by - // sending the - // Unicode characters as a "key up" with virtual keycode 0x12 (VK_MENU == - // Alt key) ... - // accept these characters, otherwise only process characters on "key down" - if (!rec.Event.KeyEvent.bKeyDown && - rec.Event.KeyEvent.wVirtualKeyCode != VK_MENU) { - continue; - } - modifierKeys = 0; - // AltGr is encoded as ( LEFT_CTRL_PRESSED | RIGHT_ALT_PRESSED ), so don't - // treat this - // combination as either CTRL or META we just turn off those two bits, so it - // is still - // possible to combine CTRL and/or META with an AltGr key by using - // right-Ctrl and/or - // left-Alt - if ((rec.Event.KeyEvent.dwControlKeyState & - (LEFT_CTRL_PRESSED | RIGHT_ALT_PRESSED)) == - (LEFT_CTRL_PRESSED | RIGHT_ALT_PRESSED)) { - rec.Event.KeyEvent.dwControlKeyState &= - ~(LEFT_CTRL_PRESSED | RIGHT_ALT_PRESSED); - } - if (rec.Event.KeyEvent.dwControlKeyState & - (RIGHT_CTRL_PRESSED | LEFT_CTRL_PRESSED)) { - modifierKeys |= CTRL; - } - if (rec.Event.KeyEvent.dwControlKeyState & - (RIGHT_ALT_PRESSED | LEFT_ALT_PRESSED)) { - modifierKeys |= META; - } - if (escSeen) { - modifierKeys |= META; - } - if (rec.Event.KeyEvent.uChar.UnicodeChar == 0) { - switch (rec.Event.KeyEvent.wVirtualKeyCode) { - case VK_LEFT: - return modifierKeys | LEFT_ARROW_KEY; - case VK_RIGHT: - return modifierKeys | RIGHT_ARROW_KEY; - case VK_UP: - return modifierKeys | UP_ARROW_KEY; - case VK_DOWN: - return modifierKeys | DOWN_ARROW_KEY; - case VK_DELETE: - return modifierKeys | DELETE_KEY; - case VK_HOME: - return modifierKeys | HOME_KEY; - case VK_END: - return modifierKeys | END_KEY; - case VK_PRIOR: - return modifierKeys | PAGE_UP_KEY; - case VK_NEXT: - return modifierKeys | PAGE_DOWN_KEY; - default: - continue; // in raw mode, ReadConsoleInput shows shift, ctrl ... - } // ... ignore them - } else if (rec.Event.KeyEvent.uChar.UnicodeChar == - ctrlChar('[')) { // ESC, set flag for later - escSeen = true; - continue; - } else { - // we got a real character, return it - return modifierKeys | rec.Event.KeyEvent.uChar.UnicodeChar; - } - } - -#else - char32_t c; - c = readUnicodeCharacter(); - if (c == 0) return 0; - -// If _DEBUG_LINUX_KEYBOARD is set, then ctrl-^ puts us into a keyboard -// debugging mode -// where we print out decimal and decoded values for whatever the "terminal" -// program -// gives us on different keystrokes. Hit ctrl-C to exit this mode. -// -#define _DEBUG_LINUX_KEYBOARD -#if defined(_DEBUG_LINUX_KEYBOARD) - if (c == ctrlChar('^')) { // ctrl-^, special debug mode, prints all keys hit, - // ctrl-C to get out - printf( - "\nEntering keyboard debugging mode (on ctrl-^), press ctrl-C to exit " - "this mode\n"); - while (true) { - unsigned char keys[10]; - int ret = read(0, keys, 10); - - if (ret <= 0) { - printf("\nret: %d\n", ret); - } - for (int i = 0; i < ret; ++i) { - char32_t key = static_cast(keys[i]); - char* friendlyTextPtr; - char friendlyTextBuf[10]; - const char* prefixText = (key < 0x80) ? "" : "0x80+"; - char32_t keyCopy = (key < 0x80) ? key : key - 0x80; - if (keyCopy >= '!' && keyCopy <= '~') { // printable - friendlyTextBuf[0] = '\''; - friendlyTextBuf[1] = keyCopy; - friendlyTextBuf[2] = '\''; - friendlyTextBuf[3] = 0; - friendlyTextPtr = friendlyTextBuf; - } else if (keyCopy == ' ') { - friendlyTextPtr = const_cast("space"); - } else if (keyCopy == 27) { - friendlyTextPtr = const_cast("ESC"); - } else if (keyCopy == 0) { - friendlyTextPtr = const_cast("NUL"); - } else if (keyCopy == 127) { - friendlyTextPtr = const_cast("DEL"); - } else { - friendlyTextBuf[0] = '^'; - friendlyTextBuf[1] = keyCopy + 0x40; - friendlyTextBuf[2] = 0; - friendlyTextPtr = friendlyTextBuf; - } - printf("%d x%02X (%s%s) ", key, key, prefixText, friendlyTextPtr); - } - printf("\x1b[1G\n"); // go to first column of new line - - // drop out of this loop on ctrl-C - if (keys[0] == ctrlChar('C')) { - printf("Leaving keyboard debugging mode (on ctrl-C)\n"); - fflush(stdout); - return -2; - } - } - } -#endif // _DEBUG_LINUX_KEYBOARD - - EscapeSequenceProcessing::thisKeyMetaCtrl = - 0; // no modifiers yet at initialDispatch - return EscapeSequenceProcessing::doDispatch( - c, EscapeSequenceProcessing::initialDispatch); -#endif // #_WIN32 -} - -/** - * Free memory used in a recent command completion session - * - * @param lc pointer to a linenoiseCompletions struct - */ -static void freeCompletions(linenoiseCompletions* lc) { - lc->completionStrings.clear(); -} - -/** - * convert {CTRL + 'A'}, {CTRL + 'a'} and {CTRL + ctrlChar( 'A' )} into - * ctrlChar( 'A' ) - * leave META alone - * - * @param c character to clean up - * @return cleaned-up character - */ -static int cleanupCtrl(int c) { - if (c & CTRL) { - int d = c & 0x1FF; - if (d >= 'a' && d <= 'z') { - c = (c + ('a' - ctrlChar('A'))) & ~CTRL; - } - if (d >= 'A' && d <= 'Z') { - c = (c + ('A' - ctrlChar('A'))) & ~CTRL; - } - if (d >= ctrlChar('A') && d <= ctrlChar('Z')) { - c = c & ~CTRL; - } - } - return c; -} - -// break characters that may precede items to be completed -static const char breakChars[] = " =+-/\\*?\"'`&<>;|@{([])}"; - -// maximum number of completions to display without asking -static const size_t completionCountCutoff = 100; - -/** - * Handle command completion, using a completionCallback() routine to provide - * possible substitutions - * This routine handles the mechanics of updating the user's input buffer with - * possible replacement - * of text as the user selects a proposed completion string, or cancels the - * completion attempt. - * @param pi PromptBase struct holding information about the prompt and our - * screen position - */ -int InputBuffer::completeLine(PromptBase& pi) { - linenoiseCompletions lc; - char32_t c = 0; - - // completionCallback() expects a parsable entity, so find the previous break - // character and - // extract a copy to parse. we also handle the case where tab is hit while - // not at end-of-line. - int startIndex = pos; - while (--startIndex >= 0) { - if (strchr(breakChars, buf32[startIndex])) { - break; - } - } - ++startIndex; - int itemLength = pos - startIndex; - Utf32String unicodeCopy(&buf32[startIndex], itemLength); - Utf8String parseItem(unicodeCopy); - - // get a list of completions - completionCallback(parseItem.get(), &lc); - - // if no completions, we are done - if (lc.completionStrings.size() == 0) { - beep(); - freeCompletions(&lc); - return 0; - } - - // at least one completion - int longestCommonPrefix = 0; - int displayLength = 0; - if (lc.completionStrings.size() == 1) { - longestCommonPrefix = static_cast(lc.completionStrings[0].length()); - } else { - bool keepGoing = true; - while (keepGoing) { - for (size_t j = 0; j < lc.completionStrings.size() - 1; ++j) { - char32_t c1 = lc.completionStrings[j][longestCommonPrefix]; - char32_t c2 = lc.completionStrings[j + 1][longestCommonPrefix]; - if ((0 == c1) || (0 == c2) || (c1 != c2)) { - keepGoing = false; - break; - } - } - if (keepGoing) { - ++longestCommonPrefix; - } - } - } - if (lc.completionStrings.size() != 1) { // beep if ambiguous - beep(); - } - - // if we can extend the item, extend it and return to main loop - if (longestCommonPrefix > itemLength) { - displayLength = len + longestCommonPrefix - itemLength; - if (displayLength > buflen) { - longestCommonPrefix -= displayLength - buflen; // don't overflow buffer - displayLength = buflen; // truncate the insertion - beep(); // and make a noise - } - Utf32String displayText(displayLength + 1); - memcpy(displayText.get(), buf32, sizeof(char32_t) * startIndex); - memcpy(&displayText[startIndex], &lc.completionStrings[0][0], - sizeof(char32_t) * longestCommonPrefix); - int tailIndex = startIndex + longestCommonPrefix; - memcpy(&displayText[tailIndex], &buf32[pos], - sizeof(char32_t) * (displayLength - tailIndex + 1)); - copyString32(buf32, displayText.get(), displayLength); - pos = startIndex + longestCommonPrefix; - len = displayLength; - refreshLine(pi); - return 0; - } - - // we can't complete any further, wait for second tab - do { - c = linenoiseReadChar(); - c = cleanupCtrl(c); - } while (c == static_cast(-1)); - - // if any character other than tab, pass it to the main loop - if (c != ctrlChar('I')) { - freeCompletions(&lc); - return c; - } - - // we got a second tab, maybe show list of possible completions - bool showCompletions = true; - bool onNewLine = false; - if (lc.completionStrings.size() > completionCountCutoff) { - int savePos = - pos; // move cursor to EOL to avoid overwriting the command line - pos = len; - refreshLine(pi); - pos = savePos; - printf("\nDisplay all %u possibilities? (y or n)", - static_cast(lc.completionStrings.size())); - fflush(stdout); - onNewLine = true; - while (c != 'y' && c != 'Y' && c != 'n' && c != 'N' && c != ctrlChar('C')) { - do { - c = linenoiseReadChar(); - c = cleanupCtrl(c); - } while (c == static_cast(-1)); - } - switch (c) { - case 'n': - case 'N': - showCompletions = false; - freeCompletions(&lc); - break; - case ctrlChar('C'): - showCompletions = false; - freeCompletions(&lc); - if (write(1, "^C", 2) == -1) return -1; // Display the ^C we got - c = 0; - break; - } - } - - // if showing the list, do it the way readline does it - bool stopList = false; - if (showCompletions) { - int longestCompletion = 0; - for (size_t j = 0; j < lc.completionStrings.size(); ++j) { - itemLength = static_cast(lc.completionStrings[j].length()); - if (itemLength > longestCompletion) { - longestCompletion = itemLength; - } - } - longestCompletion += 2; - int columnCount = pi.promptScreenColumns / longestCompletion; - if (columnCount < 1) { - columnCount = 1; - } - if (!onNewLine) { // skip this if we showed "Display all %d possibilities?" - int savePos = - pos; // move cursor to EOL to avoid overwriting the command line - pos = len; - refreshLine(pi); - pos = savePos; - } - size_t pauseRow = getScreenRows() - 1; - size_t rowCount = - (lc.completionStrings.size() + columnCount - 1) / columnCount; - for (size_t row = 0; row < rowCount; ++row) { - if (row == pauseRow) { - printf("\n--More--"); - fflush(stdout); - c = 0; - bool doBeep = false; - while (c != ' ' && c != '\r' && c != '\n' && c != 'y' && c != 'Y' && - c != 'n' && c != 'N' && c != 'q' && c != 'Q' && - c != ctrlChar('C')) { - if (doBeep) { - beep(); - } - doBeep = true; - do { - c = linenoiseReadChar(); - c = cleanupCtrl(c); - } while (c == static_cast(-1)); - } - switch (c) { - case ' ': - case 'y': - case 'Y': - printf("\r \r"); - pauseRow += getScreenRows() - 1; - break; - case '\r': - case '\n': - printf("\r \r"); - ++pauseRow; - break; - case 'n': - case 'N': - case 'q': - case 'Q': - printf("\r \r"); - stopList = true; - break; - case ctrlChar('C'): - if (write(1, "^C", 2) == -1) return -1; // Display the ^C we got - stopList = true; - break; - } - } else { - printf("\n"); - } - if (stopList) { - break; - } - for (int column = 0; column < columnCount; ++column) { - size_t index = (column * rowCount) + row; - if (index < lc.completionStrings.size()) { - itemLength = static_cast(lc.completionStrings[index].length()); - fflush(stdout); - if (write32(1, lc.completionStrings[index].get(), itemLength) == -1) - return -1; - if (((column + 1) * rowCount) + row < lc.completionStrings.size()) { - for (int k = itemLength; k < longestCompletion; ++k) { - printf(" "); - } - } - } - } - } - fflush(stdout); - freeCompletions(&lc); - } - - // display the prompt on a new line, then redisplay the input buffer - if (!stopList || c == ctrlChar('C')) { - if (write(1, "\n", 1) == -1) return 0; - } - if (!pi.write()) return 0; -#ifndef _WIN32 - // we have to generate our own newline on line wrap on Linux - if (pi.promptIndentation == 0 && pi.promptExtraLines > 0) - if (write(1, "\n", 1) == -1) return 0; -#endif - pi.promptCursorRowOffset = pi.promptExtraLines; - refreshLine(pi); - return 0; -} - -/** - * Clear the screen ONLY (no redisplay of anything) - */ -void linenoiseClearScreen(void) { -#ifdef _WIN32 - COORD coord = {0, 0}; - CONSOLE_SCREEN_BUFFER_INFO inf; - HANDLE screenHandle = GetStdHandle(STD_OUTPUT_HANDLE); - GetConsoleScreenBufferInfo(screenHandle, &inf); - SetConsoleCursorPosition(screenHandle, coord); - DWORD count; - FillConsoleOutputCharacterA(screenHandle, ' ', inf.dwSize.X * inf.dwSize.Y, - coord, &count); -#else - if (write(1, "\x1b[H\x1b[2J", 7) <= 0) return; -#endif -} - -void InputBuffer::clearScreen(PromptBase& pi) { - linenoiseClearScreen(); - if (!pi.write()) return; -#ifndef _WIN32 - // we have to generate our own newline on line wrap on Linux - if (pi.promptIndentation == 0 && pi.promptExtraLines > 0) - if (write(1, "\n", 1) == -1) return; -#endif - pi.promptCursorRowOffset = pi.promptExtraLines; - refreshLine(pi); -} - -/** - * Incremental history search -- take over the prompt and keyboard as the user - * types a search - * string, deletes characters from it, changes direction, and either accepts the - * found line (for - * execution orediting) or cancels. - * @param pi PromptBase struct holding information about the (old, - * static) prompt and our - * screen position - * @param startChar the character that began the search, used to set the initial - * direction - */ -int InputBuffer::incrementalHistorySearch(PromptBase& pi, int startChar) { - size_t bufferSize; - size_t ucharCount = 0; - - // if not already recalling, add the current line to the history list so we - // don't have to - // special case it - if (historyIndex == historyLen - 1) { - free(history[historyLen - 1]); - bufferSize = sizeof(char32_t) * len + 1; - unique_ptr tempBuffer(new char[bufferSize]); - copyString32to8(tempBuffer.get(), bufferSize, buf32); - history[historyLen - 1] = strdup8(tempBuffer.get()); - } - int historyLineLength = len; - int historyLinePosition = pos; - char32_t emptyBuffer[1]; - char emptyWidths[1]; - InputBuffer empty(emptyBuffer, emptyWidths, 1); - empty.refreshLine(pi); // erase the old input first - DynamicPrompt dp(pi, (startChar == ctrlChar('R')) ? -1 : 1); - - dp.promptPreviousLen = pi.promptPreviousLen; - dp.promptPreviousInputLen = pi.promptPreviousInputLen; - dynamicRefresh(dp, buf32, historyLineLength, - historyLinePosition); // draw user's text with our prompt - - // loop until we get an exit character - int c = 0; - bool keepLooping = true; - bool useSearchedLine = true; - bool searchAgain = false; - char32_t* activeHistoryLine = 0; - while (keepLooping) { - c = linenoiseReadChar(); - c = cleanupCtrl(c); // convert CTRL + into normal ctrl - - switch (c) { - // these characters keep the selected text but do not execute it - case ctrlChar('A'): // ctrl-A, move cursor to start of line - case HOME_KEY: - case ctrlChar('B'): // ctrl-B, move cursor left by one character - case LEFT_ARROW_KEY: - case META + 'b': // meta-B, move cursor left by one word - case META + 'B': - case CTRL + LEFT_ARROW_KEY: - case META + LEFT_ARROW_KEY: // Emacs allows Meta, bash & readline don't - case ctrlChar('D'): - case META + 'd': // meta-D, kill word to right of cursor - case META + 'D': - case ctrlChar('E'): // ctrl-E, move cursor to end of line - case END_KEY: - case ctrlChar('F'): // ctrl-F, move cursor right by one character - case RIGHT_ARROW_KEY: - case META + 'f': // meta-F, move cursor right by one word - case META + 'F': - case CTRL + RIGHT_ARROW_KEY: - case META + RIGHT_ARROW_KEY: // Emacs allows Meta, bash & readline don't - case META + ctrlChar('H'): - case ctrlChar('J'): - case ctrlChar('K'): // ctrl-K, kill from cursor to end of line - case ctrlChar('M'): - case ctrlChar('N'): // ctrl-N, recall next line in history - case ctrlChar('P'): // ctrl-P, recall previous line in history - case DOWN_ARROW_KEY: - case UP_ARROW_KEY: - case ctrlChar('T'): // ctrl-T, transpose characters - case ctrlChar( - 'U'): // ctrl-U, kill all characters to the left of the cursor - case ctrlChar('W'): - case META + 'y': // meta-Y, "yank-pop", rotate popped text - case META + 'Y': - case 127: - case DELETE_KEY: - case META + '<': // start of history - case PAGE_UP_KEY: - case META + '>': // end of history - case PAGE_DOWN_KEY: - keepLooping = false; - break; - - // these characters revert the input line to its previous state - case ctrlChar('C'): // ctrl-C, abort this line - case ctrlChar('G'): - case ctrlChar('L'): // ctrl-L, clear screen and redisplay line - keepLooping = false; - useSearchedLine = false; - if (c != ctrlChar('L')) { - c = -1; // ctrl-C and ctrl-G just abort the search and do nothing - // else - } - break; - - // these characters stay in search mode and update the display - case ctrlChar('S'): - case ctrlChar('R'): - if (dp.searchTextLen == - 0) { // if no current search text, recall previous text - if (previousSearchText.length()) { - dp.updateSearchText(previousSearchText.get()); - } - } - if ((dp.direction == 1 && c == ctrlChar('R')) || - (dp.direction == -1 && c == ctrlChar('S'))) { - dp.direction = 0 - dp.direction; // reverse direction - dp.updateSearchPrompt(); // change the prompt - } else { - searchAgain = true; // same direction, search again - } - break; - -// job control is its own thing -#ifndef _WIN32 - case ctrlChar('Z'): // ctrl-Z, job control - disableRawMode(); // Returning to Linux (whatever) shell, leave raw - // mode - raise(SIGSTOP); // Break out in mid-line - enableRawMode(); // Back from Linux shell, re-enter raw mode - { - bufferSize = historyLineLength + 1; - unique_ptr tempUnicode(new char32_t[bufferSize]); - copyString8to32(tempUnicode.get(), bufferSize, ucharCount, - history[historyIndex]); - dynamicRefresh(dp, tempUnicode.get(), historyLineLength, - historyLinePosition); - } - continue; - break; -#endif - - // these characters update the search string, and hence the selected input - // line - case ctrlChar('H'): // backspace/ctrl-H, delete char to left of cursor - if (dp.searchTextLen > 0) { - unique_ptr tempUnicode(new char32_t[dp.searchTextLen]); - --dp.searchTextLen; - dp.searchText[dp.searchTextLen] = 0; - copyString32(tempUnicode.get(), dp.searchText.get(), - dp.searchTextLen); - dp.updateSearchText(tempUnicode.get()); - } else { - beep(); - } - break; - - case ctrlChar('Y'): // ctrl-Y, yank killed text - break; - - default: - if (!isControlChar(c) && c <= 0x0010FFFF) { // not an action character - unique_ptr tempUnicode( - new char32_t[dp.searchTextLen + 2]); - copyString32(tempUnicode.get(), dp.searchText.get(), - dp.searchTextLen); - tempUnicode[dp.searchTextLen] = c; - tempUnicode[dp.searchTextLen + 1] = 0; - dp.updateSearchText(tempUnicode.get()); - } else { - beep(); - } - } // switch - - // if we are staying in search mode, search now - if (keepLooping) { - bufferSize = historyLineLength + 1; - if (activeHistoryLine) { - delete[] activeHistoryLine; - activeHistoryLine = nullptr; - } - activeHistoryLine = new char32_t[bufferSize]; - copyString8to32(activeHistoryLine, bufferSize, ucharCount, - history[historyIndex]); - if (dp.searchTextLen > 0) { - bool found = false; - int historySearchIndex = historyIndex; - int lineLength = static_cast(ucharCount); - int lineSearchPos = historyLinePosition; - if (searchAgain) { - lineSearchPos += dp.direction; - } - searchAgain = false; - while (true) { - while ((dp.direction > 0) ? (lineSearchPos < lineLength) - : (lineSearchPos >= 0)) { - if (strncmp32(dp.searchText.get(), - &activeHistoryLine[lineSearchPos], - dp.searchTextLen) == 0) { - found = true; - break; - } - lineSearchPos += dp.direction; - } - if (found) { - historyIndex = historySearchIndex; - historyLineLength = lineLength; - historyLinePosition = lineSearchPos; - break; - } else if ((dp.direction > 0) ? (historySearchIndex < historyLen - 1) - : (historySearchIndex > 0)) { - historySearchIndex += dp.direction; - bufferSize = strlen8(history[historySearchIndex]) + 1; - delete[] activeHistoryLine; - activeHistoryLine = nullptr; - activeHistoryLine = new char32_t[bufferSize]; - copyString8to32(activeHistoryLine, bufferSize, ucharCount, - history[historySearchIndex]); - lineLength = static_cast(ucharCount); - lineSearchPos = - (dp.direction > 0) ? 0 : (lineLength - dp.searchTextLen); - } else { - beep(); - break; - } - }; // while - } - if (activeHistoryLine) { - delete[] activeHistoryLine; - activeHistoryLine = nullptr; - } - bufferSize = historyLineLength + 1; - activeHistoryLine = new char32_t[bufferSize]; - copyString8to32(activeHistoryLine, bufferSize, ucharCount, - history[historyIndex]); - dynamicRefresh(dp, activeHistoryLine, historyLineLength, - historyLinePosition); // draw user's text with our prompt - } - } // while - - // leaving history search, restore previous prompt, maybe make searched line - // current - PromptBase pb; - pb.promptChars = pi.promptIndentation; - pb.promptBytes = pi.promptBytes; - Utf32String tempUnicode(pb.promptBytes + 1); - - copyString32(tempUnicode.get(), &pi.promptText[pi.promptLastLinePosition], - pb.promptBytes - pi.promptLastLinePosition); - tempUnicode.initFromBuffer(); - pb.promptText = tempUnicode; - pb.promptExtraLines = 0; - pb.promptIndentation = pi.promptIndentation; - pb.promptLastLinePosition = 0; - pb.promptPreviousInputLen = historyLineLength; - pb.promptCursorRowOffset = dp.promptCursorRowOffset; - pb.promptScreenColumns = pi.promptScreenColumns; - pb.promptPreviousLen = dp.promptChars; - if (useSearchedLine && activeHistoryLine) { - historyRecallMostRecent = true; - copyString32(buf32, activeHistoryLine, buflen + 1); - len = historyLineLength; - pos = historyLinePosition; - } - if (activeHistoryLine) { - delete[] activeHistoryLine; - activeHistoryLine = nullptr; - } - dynamicRefresh(pb, buf32, len, - pos); // redraw the original prompt with current input - pi.promptPreviousInputLen = len; - pi.promptCursorRowOffset = pi.promptExtraLines + pb.promptCursorRowOffset; - previousSearchText = - dp.searchText; // save search text for possible reuse on ctrl-R ctrl-R - return c; // pass a character or -1 back to main loop -} - -static bool isCharacterAlphanumeric(char32_t testChar) { -#ifdef _WIN32 - return (iswalnum((wint_t)testChar) != 0 ? true : false); -#else - return (iswalnum(testChar) != 0 ? true : false); -#endif -} - -#ifndef _WIN32 -static bool gotResize = false; -#endif -static int keyType = 0; - -int InputBuffer::getInputLine(PromptBase& pi) { - keyType = 0; - - // The latest history entry is always our current buffer - if (len > 0) { - size_t bufferSize = sizeof(char32_t) * len + 1; - unique_ptr tempBuffer(new char[bufferSize]); - copyString32to8(tempBuffer.get(), bufferSize, buf32); - linenoiseHistoryAdd(tempBuffer.get()); - } else { - linenoiseHistoryAdd(""); - } - historyIndex = historyLen - 1; - historyRecallMostRecent = false; - - // display the prompt - if (!pi.write()) return -1; - -#ifndef _WIN32 - // we have to generate our own newline on line wrap on Linux - if (pi.promptIndentation == 0 && pi.promptExtraLines > 0) - if (write(1, "\n", 1) == -1) return -1; -#endif - - // the cursor starts out at the end of the prompt - pi.promptCursorRowOffset = pi.promptExtraLines; - - // kill and yank start in "other" mode - killRing.lastAction = KillRing::actionOther; - - // when history search returns control to us, we execute its terminating - // keystroke - int terminatingKeystroke = -1; - - // if there is already text in the buffer, display it first - if (len > 0) { - refreshLine(pi); - } - - // loop collecting characters, respond to line editing characters - while (true) { - int c; - if (terminatingKeystroke == -1) { - c = linenoiseReadChar(); // get a new keystroke - - keyType = 0; - if (c != 0) { - // set flag that we got some input - if (c == ctrlChar('C')) { - keyType = 1; - } else if (c == ctrlChar('D')) { - keyType = 2; - } - } - -#ifndef _WIN32 - if (c == 0 && gotResize) { - // caught a window resize event - // now redraw the prompt and line - gotResize = false; - pi.promptScreenColumns = getScreenColumns(); - dynamicRefresh(pi, buf32, len, - pos); // redraw the original prompt with current input - continue; - } -#endif - } else { - c = terminatingKeystroke; // use the terminating keystroke from search - terminatingKeystroke = -1; // clear it once we've used it - } - - c = cleanupCtrl(c); // convert CTRL + into normal ctrl - - if (c == 0) { - return len; - } - - if (c == -1) { - refreshLine(pi); - continue; - } - - if (c == -2) { - if (!pi.write()) return -1; - refreshLine(pi); - continue; - } - - // ctrl-I/tab, command completion, needs to be before switch statement - if (c == ctrlChar('I') && completionCallback) { - killRing.lastAction = KillRing::actionOther; - historyRecallMostRecent = false; - - // completeLine does the actual completion and replacement - c = completeLine(pi); - - if (c < 0) // return on error - return len; - - if (c == 0) // read next character when 0 - continue; - - // deliberate fall-through here, so we use the terminating character - } - - switch (c) { - case ctrlChar('A'): // ctrl-A, move cursor to start of line - case HOME_KEY: - killRing.lastAction = KillRing::actionOther; - pos = 0; - refreshLine(pi); - break; - - case ctrlChar('B'): // ctrl-B, move cursor left by one character - case LEFT_ARROW_KEY: - killRing.lastAction = KillRing::actionOther; - if (pos > 0) { - --pos; - refreshLine(pi); - } - break; - - case META + 'b': // meta-B, move cursor left by one word - case META + 'B': - case CTRL + LEFT_ARROW_KEY: - case META + LEFT_ARROW_KEY: // Emacs allows Meta, bash & readline don't - killRing.lastAction = KillRing::actionOther; - if (pos > 0) { - while (pos > 0 && !isCharacterAlphanumeric(buf32[pos - 1])) { - --pos; - } - while (pos > 0 && isCharacterAlphanumeric(buf32[pos - 1])) { - --pos; - } - refreshLine(pi); - } - break; - - case ctrlChar('C'): // ctrl-C, abort this line - killRing.lastAction = KillRing::actionOther; - historyRecallMostRecent = false; - errno = EAGAIN; - --historyLen; - free(history[historyLen]); - // we need one last refresh with the cursor at the end of the line - // so we don't display the next prompt over the previous input line - pos = len; // pass len as pos for EOL - refreshLine(pi); - if (write(1, "^C", 2) == -1) return -1; // Display the ^C we got - return -1; - - case META + 'c': // meta-C, give word initial Cap - case META + 'C': - killRing.lastAction = KillRing::actionOther; - historyRecallMostRecent = false; - if (pos < len) { - while (pos < len && !isCharacterAlphanumeric(buf32[pos])) { - ++pos; - } - if (pos < len && isCharacterAlphanumeric(buf32[pos])) { - if (buf32[pos] >= 'a' && buf32[pos] <= 'z') { - buf32[pos] += 'A' - 'a'; - } - ++pos; - } - while (pos < len && isCharacterAlphanumeric(buf32[pos])) { - if (buf32[pos] >= 'A' && buf32[pos] <= 'Z') { - buf32[pos] += 'a' - 'A'; - } - ++pos; - } - refreshLine(pi); - } - break; - - // ctrl-D, delete the character under the cursor - // on an empty line, exit the shell - case ctrlChar('D'): - killRing.lastAction = KillRing::actionOther; - if (len > 0 && pos < len) { - historyRecallMostRecent = false; - memmove(buf32 + pos, buf32 + pos + 1, sizeof(char32_t) * (len - pos)); - --len; - refreshLine(pi); - } else if (len == 0) { - --historyLen; - free(history[historyLen]); - return -1; - } - break; - - case META + 'd': // meta-D, kill word to right of cursor - case META + 'D': - if (pos < len) { - historyRecallMostRecent = false; - int endingPos = pos; - while (endingPos < len && - !isCharacterAlphanumeric(buf32[endingPos])) { - ++endingPos; - } - while (endingPos < len && isCharacterAlphanumeric(buf32[endingPos])) { - ++endingPos; - } - killRing.kill(&buf32[pos], endingPos - pos, true); - memmove(buf32 + pos, buf32 + endingPos, - sizeof(char32_t) * (len - endingPos + 1)); - len -= endingPos - pos; - refreshLine(pi); - } - killRing.lastAction = KillRing::actionKill; - break; - - case ctrlChar('E'): // ctrl-E, move cursor to end of line - case END_KEY: - killRing.lastAction = KillRing::actionOther; - pos = len; - refreshLine(pi); - break; - - case ctrlChar('F'): // ctrl-F, move cursor right by one character - case RIGHT_ARROW_KEY: - killRing.lastAction = KillRing::actionOther; - if (pos < len) { - ++pos; - refreshLine(pi); - } - break; - - case META + 'f': // meta-F, move cursor right by one word - case META + 'F': - case CTRL + RIGHT_ARROW_KEY: - case META + RIGHT_ARROW_KEY: // Emacs allows Meta, bash & readline don't - killRing.lastAction = KillRing::actionOther; - if (pos < len) { - while (pos < len && !isCharacterAlphanumeric(buf32[pos])) { - ++pos; - } - while (pos < len && isCharacterAlphanumeric(buf32[pos])) { - ++pos; - } - refreshLine(pi); - } - break; - - case ctrlChar('H'): // backspace/ctrl-H, delete char to left of cursor - killRing.lastAction = KillRing::actionOther; - if (pos > 0) { - historyRecallMostRecent = false; - memmove(buf32 + pos - 1, buf32 + pos, - sizeof(char32_t) * (1 + len - pos)); - --pos; - --len; - refreshLine(pi); - } - break; - - // meta-Backspace, kill word to left of cursor - case META + ctrlChar('H'): - if (pos > 0) { - historyRecallMostRecent = false; - int startingPos = pos; - while (pos > 0 && !isCharacterAlphanumeric(buf32[pos - 1])) { - --pos; - } - while (pos > 0 && isCharacterAlphanumeric(buf32[pos - 1])) { - --pos; - } - killRing.kill(&buf32[pos], startingPos - pos, false); - memmove(buf32 + pos, buf32 + startingPos, - sizeof(char32_t) * (len - startingPos + 1)); - len -= startingPos - pos; - refreshLine(pi); - } - killRing.lastAction = KillRing::actionKill; - break; - - case ctrlChar('J'): // ctrl-J/linefeed/newline, accept line - case ctrlChar('M'): // ctrl-M/return/enter - killRing.lastAction = KillRing::actionOther; - // we need one last refresh with the cursor at the end of the line - // so we don't display the next prompt over the previous input line - pos = len; // pass len as pos for EOL - refreshLine(pi); - historyPreviousIndex = historyRecallMostRecent ? historyIndex : -2; - --historyLen; - free(history[historyLen]); - return len; - - case ctrlChar('K'): // ctrl-K, kill from cursor to end of line - killRing.kill(&buf32[pos], len - pos, true); - buf32[pos] = '\0'; - len = pos; - refreshLine(pi); - killRing.lastAction = KillRing::actionKill; - historyRecallMostRecent = false; - break; - - case ctrlChar('L'): // ctrl-L, clear screen and redisplay line - clearScreen(pi); - break; - - case META + 'l': // meta-L, lowercase word - case META + 'L': - killRing.lastAction = KillRing::actionOther; - if (pos < len) { - historyRecallMostRecent = false; - while (pos < len && !isCharacterAlphanumeric(buf32[pos])) { - ++pos; - } - while (pos < len && isCharacterAlphanumeric(buf32[pos])) { - if (buf32[pos] >= 'A' && buf32[pos] <= 'Z') { - buf32[pos] += 'a' - 'A'; - } - ++pos; - } - refreshLine(pi); - } - break; - - case ctrlChar('N'): // ctrl-N, recall next line in history - case ctrlChar('P'): // ctrl-P, recall previous line in history - case DOWN_ARROW_KEY: - case UP_ARROW_KEY: - killRing.lastAction = KillRing::actionOther; - // if not already recalling, add the current line to the history list so - // we don't - // have to special case it - if (historyIndex == historyLen - 1) { - free(history[historyLen - 1]); - size_t tempBufferSize = sizeof(char32_t) * len + 1; - unique_ptr tempBuffer(new char[tempBufferSize]); - copyString32to8(tempBuffer.get(), tempBufferSize, buf32); - history[historyLen - 1] = strdup8(tempBuffer.get()); - } - if (historyLen > 1) { - if (c == UP_ARROW_KEY) { - c = ctrlChar('P'); - } - if (historyPreviousIndex != -2 && c != ctrlChar('P')) { - historyIndex = - 1 + historyPreviousIndex; // emulate Windows down-arrow - } else { - historyIndex += (c == ctrlChar('P')) ? -1 : 1; - } - historyPreviousIndex = -2; - if (historyIndex < 0) { - historyIndex = 0; - break; - } else if (historyIndex >= historyLen) { - historyIndex = historyLen - 1; - break; - } - historyRecallMostRecent = true; - size_t ucharCount = 0; - copyString8to32(buf32, buflen, ucharCount, history[historyIndex]); - len = pos = static_cast(ucharCount); - refreshLine(pi); - } - break; - - case ctrlChar('R'): // ctrl-R, reverse history search - case ctrlChar('S'): // ctrl-S, forward history search - terminatingKeystroke = incrementalHistorySearch(pi, c); - break; - - case ctrlChar('T'): // ctrl-T, transpose characters - killRing.lastAction = KillRing::actionOther; - if (pos > 0 && len > 1) { - historyRecallMostRecent = false; - size_t leftCharPos = (pos == len) ? pos - 2 : pos - 1; - char32_t aux = buf32[leftCharPos]; - buf32[leftCharPos] = buf32[leftCharPos + 1]; - buf32[leftCharPos + 1] = aux; - if (pos != len) ++pos; - refreshLine(pi); - } - break; - - case ctrlChar( - 'U'): // ctrl-U, kill all characters to the left of the cursor - if (pos > 0) { - historyRecallMostRecent = false; - killRing.kill(&buf32[0], pos, false); - len -= pos; - memmove(buf32, buf32 + pos, sizeof(char32_t) * (len + 1)); - pos = 0; - refreshLine(pi); - } - killRing.lastAction = KillRing::actionKill; - break; - - case META + 'u': // meta-U, uppercase word - case META + 'U': - killRing.lastAction = KillRing::actionOther; - if (pos < len) { - historyRecallMostRecent = false; - while (pos < len && !isCharacterAlphanumeric(buf32[pos])) { - ++pos; - } - while (pos < len && isCharacterAlphanumeric(buf32[pos])) { - if (buf32[pos] >= 'a' && buf32[pos] <= 'z') { - buf32[pos] += 'A' - 'a'; - } - ++pos; - } - refreshLine(pi); - } - break; - - // ctrl-W, kill to whitespace (not word) to left of cursor - case ctrlChar('W'): - if (pos > 0) { - historyRecallMostRecent = false; - int startingPos = pos; - while (pos > 0 && buf32[pos - 1] == ' ') { - --pos; - } - while (pos > 0 && buf32[pos - 1] != ' ') { - --pos; - } - killRing.kill(&buf32[pos], startingPos - pos, false); - memmove(buf32 + pos, buf32 + startingPos, - sizeof(char32_t) * (len - startingPos + 1)); - len -= startingPos - pos; - refreshLine(pi); - } - killRing.lastAction = KillRing::actionKill; - break; - - case ctrlChar('Y'): // ctrl-Y, yank killed text - historyRecallMostRecent = false; - { - Utf32String* restoredText = killRing.yank(); - if (restoredText) { - bool truncated = false; - size_t ucharCount = restoredText->length(); - if (ucharCount > static_cast(buflen - len)) { - ucharCount = buflen - len; - truncated = true; - } - memmove(buf32 + pos + ucharCount, buf32 + pos, - sizeof(char32_t) * (len - pos + 1)); - memmove(buf32 + pos, restoredText->get(), - sizeof(char32_t) * ucharCount); - pos += static_cast(ucharCount); - len += static_cast(ucharCount); - refreshLine(pi); - killRing.lastAction = KillRing::actionYank; - killRing.lastYankSize = ucharCount; - if (truncated) { - beep(); - } - } else { - beep(); - } - } - break; - - case META + 'y': // meta-Y, "yank-pop", rotate popped text - case META + 'Y': - if (killRing.lastAction == KillRing::actionYank) { - historyRecallMostRecent = false; - Utf32String* restoredText = killRing.yankPop(); - if (restoredText) { - bool truncated = false; - size_t ucharCount = restoredText->length(); - if (ucharCount > - static_cast(killRing.lastYankSize + buflen - len)) { - ucharCount = killRing.lastYankSize + buflen - len; - truncated = true; - } - if (ucharCount > killRing.lastYankSize) { - memmove(buf32 + pos + ucharCount - killRing.lastYankSize, - buf32 + pos, sizeof(char32_t) * (len - pos + 1)); - memmove(buf32 + pos - killRing.lastYankSize, restoredText->get(), - sizeof(char32_t) * ucharCount); - } else { - memmove(buf32 + pos - killRing.lastYankSize, restoredText->get(), - sizeof(char32_t) * ucharCount); - memmove(buf32 + pos + ucharCount - killRing.lastYankSize, - buf32 + pos, sizeof(char32_t) * (len - pos + 1)); - } - pos += static_cast(ucharCount - killRing.lastYankSize); - len += static_cast(ucharCount - killRing.lastYankSize); - killRing.lastYankSize = ucharCount; - refreshLine(pi); - if (truncated) { - beep(); - } - break; - } - } - beep(); - break; - -#ifndef _WIN32 - case ctrlChar('Z'): // ctrl-Z, job control - disableRawMode(); // Returning to Linux (whatever) shell, leave raw - // mode - raise(SIGSTOP); // Break out in mid-line - enableRawMode(); // Back from Linux shell, re-enter raw mode - if (!pi.write()) break; // Redraw prompt - refreshLine(pi); // Refresh the line - break; -#endif - - // DEL, delete the character under the cursor - case 127: - case DELETE_KEY: - killRing.lastAction = KillRing::actionOther; - if (len > 0 && pos < len) { - historyRecallMostRecent = false; - memmove(buf32 + pos, buf32 + pos + 1, sizeof(char32_t) * (len - pos)); - --len; - refreshLine(pi); - } - break; - - case META + '<': // meta-<, beginning of history - case PAGE_UP_KEY: // Page Up, beginning of history - case META + '>': // meta->, end of history - case PAGE_DOWN_KEY: // Page Down, end of history - killRing.lastAction = KillRing::actionOther; - // if not already recalling, add the current line to the history list so - // we don't - // have to special case it - if (historyIndex == historyLen - 1) { - free(history[historyLen - 1]); - size_t tempBufferSize = sizeof(char32_t) * len + 1; - unique_ptr tempBuffer(new char[tempBufferSize]); - copyString32to8(tempBuffer.get(), tempBufferSize, buf32); - history[historyLen - 1] = strdup8(tempBuffer.get()); - } - if (historyLen > 1) { - historyIndex = - (c == META + '<' || c == PAGE_UP_KEY) ? 0 : historyLen - 1; - historyPreviousIndex = -2; - historyRecallMostRecent = true; - size_t ucharCount = 0; - copyString8to32(buf32, buflen, ucharCount, history[historyIndex]); - len = pos = static_cast(ucharCount); - refreshLine(pi); - } - break; - - // not one of our special characters, maybe insert it in the buffer - default: - killRing.lastAction = KillRing::actionOther; - historyRecallMostRecent = false; - if (c & (META | CTRL)) { // beep on unknown Ctrl and/or Meta keys - beep(); - break; - } - if (len < buflen) { - if (isControlChar(c)) { // don't insert control characters - beep(); - break; - } - if (len == pos) { // at end of buffer - buf32[pos] = c; - ++pos; - ++len; - buf32[len] = '\0'; - int inputLen = calculateColumnPosition(buf32, len); - if (pi.promptIndentation + inputLen < pi.promptScreenColumns) { - if (inputLen > pi.promptPreviousInputLen) - pi.promptPreviousInputLen = inputLen; - /* Avoid a full update of the line in the - * trivial case. */ - if (write32(1, reinterpret_cast(&c), 1) == -1) - return -1; - } else { - refreshLine(pi); - } - } else { // not at end of buffer, have to move characters to our - // right - memmove(buf32 + pos + 1, buf32 + pos, - sizeof(char32_t) * (len - pos)); - buf32[pos] = c; - ++len; - ++pos; - buf32[len] = '\0'; - refreshLine(pi); - } - } else { - beep(); // buffer is full, beep on new characters - } - break; - } - } - return len; -} - -static string preloadedBufferContents; // used with linenoisePreloadBuffer -static string preloadErrorMessage; - -/** - * linenoisePreloadBuffer provides text to be inserted into the command buffer - * - * the provided text will be processed to be usable and will be used to preload - * the input buffer on the next call to linenoise() - * - * @param preloadText text to begin with on the next call to linenoise() - */ -void linenoisePreloadBuffer(const char* preloadText) { - if (!preloadText) { - return; - } - int bufferSize = static_cast(strlen(preloadText) + 1); - unique_ptr tempBuffer(new char[bufferSize]); - strncpy(&tempBuffer[0], preloadText, bufferSize); - - // remove characters that won't display correctly - char* pIn = &tempBuffer[0]; - char* pOut = pIn; - bool controlsStripped = false; - bool whitespaceSeen = false; - while (*pIn) { - unsigned char c = - *pIn++; // we need unsigned so chars 0x80 and above are allowed - if ('\r' == c) { // silently skip CR - continue; - } - if ('\n' == c || '\t' == c) { // note newline or tab - whitespaceSeen = true; - continue; - } - if (isControlChar( - c)) { // remove other control characters, flag for message - controlsStripped = true; - *pOut++ = ' '; - continue; - } - if (whitespaceSeen) { // convert whitespace to a single space - *pOut++ = ' '; - whitespaceSeen = false; - } - *pOut++ = c; - } - *pOut = 0; - int processedLength = static_cast(pOut - tempBuffer.get()); - bool lineTruncated = false; - if (processedLength > (LINENOISE_MAX_LINE - 1)) { - lineTruncated = true; - tempBuffer[LINENOISE_MAX_LINE - 1] = 0; - } - preloadedBufferContents = tempBuffer.get(); - if (controlsStripped) { - preloadErrorMessage += - " [Edited line: control characters were converted to spaces]\n"; - } - if (lineTruncated) { - preloadErrorMessage += " [Edited line: the line length was reduced from "; - char buf[128]; - snprintf(buf, sizeof(buf), "%d to %d]\n", processedLength, - (LINENOISE_MAX_LINE - 1)); - preloadErrorMessage += buf; - } -} - -/** - * linenoise is a readline replacement. - * - * call it with a prompt to display and it will return a line of input from the - * user - * - * @param prompt text of prompt to display to the user - * @return the returned string belongs to the caller on return and must be - * freed to prevent - * memory leaks - */ -char* linenoise(const char* prompt) { -#ifndef _WIN32 - gotResize = false; -#endif - if (isatty(STDIN_FILENO)) { // input is from a terminal - char32_t buf32[LINENOISE_MAX_LINE]; - char charWidths[LINENOISE_MAX_LINE]; - if (!preloadErrorMessage.empty()) { - printf("%s", preloadErrorMessage.c_str()); - fflush(stdout); - preloadErrorMessage.clear(); - } - PromptInfo pi(prompt, getScreenColumns()); - if (isUnsupportedTerm()) { - if (!pi.write()) return 0; - fflush(stdout); - if (preloadedBufferContents.empty()) { - unique_ptr buf8(new char[LINENOISE_MAX_LINE]); - if (fgets(buf8.get(), LINENOISE_MAX_LINE, stdin) == NULL) { - return NULL; - } - size_t len = strlen(buf8.get()); - while (len && (buf8[len - 1] == '\n' || buf8[len - 1] == '\r')) { - --len; - buf8[len] = '\0'; - } - return strdup(buf8.get()); // caller must free buffer - } else { - char* buf8 = strdup(preloadedBufferContents.c_str()); - preloadedBufferContents.clear(); - return buf8; // caller must free buffer - } - } else { - if (enableRawMode() == -1) { - return NULL; - } - InputBuffer ib(buf32, charWidths, LINENOISE_MAX_LINE); - if (!preloadedBufferContents.empty()) { - ib.preloadBuffer(preloadedBufferContents.c_str()); - preloadedBufferContents.clear(); - } - int count = ib.getInputLine(pi); - disableRawMode(); - printf("\n"); - if (count == -1) { - return NULL; - } - size_t bufferSize = sizeof(char32_t) * ib.length() + 1; - unique_ptr buf8(new char[bufferSize]); - copyString32to8(buf8.get(), bufferSize, buf32); - return strdup(buf8.get()); // caller must free buffer - } - } else { // input not from a terminal, we should work with piped input, i.e. - // redirected stdin - unique_ptr buf8(new char[LINENOISE_MAX_LINE]); - if (fgets(buf8.get(), LINENOISE_MAX_LINE, stdin) == NULL) { - return NULL; - } - - // if fgets() gave us the newline, remove it - int count = static_cast(strlen(buf8.get())); - if (count > 0 && buf8[count - 1] == '\n') { - --count; - buf8[count] = '\0'; - } - return strdup(buf8.get()); // caller must free buffer - } -} - -/* Register a callback function to be called for tab-completion. */ -void linenoiseSetCompletionCallback(linenoiseCompletionCallback* fn) { - completionCallback = fn; -} - -void linenoiseAddCompletion(linenoiseCompletions* lc, const char* str) { - lc->completionStrings.push_back(Utf32String(str)); -} - -int linenoiseHistoryAdd(const char* line) { - if (historyMaxLen == 0) { - return 0; - } - if (history == NULL) { - history = - reinterpret_cast(malloc(sizeof(char8_t*) * historyMaxLen)); - if (history == NULL) { - return 0; - } - memset(history, 0, (sizeof(char*) * historyMaxLen)); - } - char8_t* linecopy = strdup8(line); - if (!linecopy) { - return 0; - } - - // convert newlines in multi-line code to spaces before storing - char8_t* p = linecopy; - while (*p) { - if (*p == '\n') { - *p = ' '; - } - ++p; - } - - // prevent duplicate history entries - if (historyLen > 0 && history[historyLen - 1] != nullptr && - strcmp(reinterpret_cast(history[historyLen - 1]), - reinterpret_cast(linecopy)) == 0) { - free(linecopy); - return 0; - } - - if (historyLen == historyMaxLen) { - free(history[0]); - memmove(history, history + 1, sizeof(char*) * (historyMaxLen - 1)); - --historyLen; - if (--historyPreviousIndex < -1) { - historyPreviousIndex = -2; - } - } - - history[historyLen] = linecopy; - ++historyLen; - return 1; -} - -int linenoiseHistorySetMaxLen(int len) { - if (len < 1) { - return 0; - } - if (history) { - int tocopy = historyLen; - char8_t** newHistory = - reinterpret_cast(malloc(sizeof(char8_t*) * len)); - if (newHistory == NULL) { - return 0; - } - if (len < tocopy) { - tocopy = len; - } - memcpy(newHistory, history + historyMaxLen - tocopy, - sizeof(char8_t*) * tocopy); - free(history); - history = newHistory; - } - historyMaxLen = len; - if (historyLen > historyMaxLen) { - historyLen = historyMaxLen; - } - return 1; -} - -/* Fetch a line of the history by (zero-based) index. If the requested - * line does not exist, NULL is returned. The return value is a heap-allocated - * copy of the line, and the caller is responsible for de-allocating it. */ -char* linenoiseHistoryLine(int index) { - if (index < 0 || index >= historyLen) return NULL; - - return strdup(reinterpret_cast(history[index])); -} - -/* Save the history in the specified file. On success 0 is returned - * otherwise -1 is returned. */ -int linenoiseHistorySave(const char* filename) { -#if _WIN32 - FILE* fp = fopen(filename, "wt"); -#else - int fd = open(filename, O_CREAT | O_TRUNC | O_WRONLY, S_IRUSR | S_IWUSR); - - if (fd < 0) { - return -1; - } - - FILE* fp = fdopen(fd, "wt"); -#endif - - if (fp == NULL) { - return -1; - } - - for (int j = 0; j < historyLen; ++j) { - if (history[j][0] != '\0') { - fprintf(fp, "%s\n", history[j]); - } - } - - fclose(fp); - - return 0; -} - -/* Load the history from the specified file. If the file does not exist - * zero is returned and no operation is performed. - * - * If the file exists and the operation succeeded 0 is returned, otherwise - * on error -1 is returned. */ -int linenoiseHistoryLoad(const char* filename) { - FILE* fp = fopen(filename, "rt"); - if (fp == NULL) { - return -1; - } - - char buf[LINENOISE_MAX_LINE]; - while (fgets(buf, LINENOISE_MAX_LINE, fp) != NULL) { - char* p = strchr(buf, '\r'); - if (!p) { - p = strchr(buf, '\n'); - } - if (p) { - *p = '\0'; - } - if (p != buf) { - linenoiseHistoryAdd(buf); - } - } - fclose(fp); - return 0; -} - -/* Set if to use or not the multi line mode. */ -/* note that this is a stub only, as linenoise-ng always multi-line */ -void linenoiseSetMultiLine(int) {} - -/* This special mode is used by linenoise in order to print scan codes - * on screen for debugging / development purposes. It is implemented - * by the linenoise_example program using the --keycodes option. */ -void linenoisePrintKeyCodes(void) { - char quit[4]; - - printf( - "Linenoise key codes debugging mode.\n" - "Press keys to see scan codes. Type 'quit' at any time to exit.\n"); - if (enableRawMode() == -1) return; - memset(quit, ' ', 4); - while (1) { - char c; - int nread; - -#if _WIN32 - nread = _read(STDIN_FILENO, &c, 1); -#else - nread = read(STDIN_FILENO, &c, 1); -#endif - if (nread <= 0) continue; - memmove(quit, quit + 1, sizeof(quit) - 1); /* shift string to left. */ - quit[sizeof(quit) - 1] = c; /* Insert current char on the right. */ - if (memcmp(quit, "quit", sizeof(quit)) == 0) break; - - printf("'%c' %02x (%d) (type quit to exit)\n", isprint(c) ? c : '?', (int)c, - (int)c); - printf("\r"); /* Go left edge manually, we are in raw mode. */ - fflush(stdout); - } - disableRawMode(); -} - -#ifndef _WIN32 -static void WindowSizeChanged(int) { - // do nothing here but setting this flag - gotResize = true; -} -#endif - -int linenoiseInstallWindowChangeHandler(void) { -#ifndef _WIN32 - struct sigaction sa; - sigemptyset(&sa.sa_mask); - sa.sa_flags = 0; - sa.sa_handler = &WindowSizeChanged; - - if (sigaction(SIGWINCH, &sa, nullptr) == -1) { - return errno; - } -#endif - return 0; -} - -int linenoiseKeyType(void) { - return keyType; -} diff --git a/src/linenoise/linenoise.h b/src/linenoise/linenoise.h deleted file mode 100644 index 3a8eb9f7..00000000 --- a/src/linenoise/linenoise.h +++ /dev/null @@ -1,73 +0,0 @@ -/* linenoise.h -- guerrilla line editing library against the idea that a - * line editing lib needs to be 20,000 lines of C code. - * - * See linenoise.c for more information. - * - * Copyright (c) 2010, Salvatore Sanfilippo - * Copyright (c) 2010, Pieter Noordhuis - * - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * * Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Redis nor the names of its contributors may be used - * to endorse or promote products derived from this software without - * specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE - * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef __LINENOISE_H -#define __LINENOISE_H - -#define LINENOISE_VERSION "1.0.0" -#define LINENOISE_VERSION_MAJOR 1 -#define LINENOISE_VERSION_MINOR 1 - -#ifdef __cplusplus -extern "C" { -#endif - -typedef struct linenoiseCompletions linenoiseCompletions; - -typedef void(linenoiseCompletionCallback)(const char*, linenoiseCompletions*); -void linenoiseSetCompletionCallback(linenoiseCompletionCallback* fn); -void linenoiseAddCompletion(linenoiseCompletions* lc, const char* str); - -char* linenoise(const char* prompt); -void linenoisePreloadBuffer(const char* preloadText); -int linenoiseHistoryAdd(const char* line); -int linenoiseHistorySetMaxLen(int len); -char* linenoiseHistoryLine(int index); -int linenoiseHistorySave(const char* filename); -int linenoiseHistoryLoad(const char* filename); -void linenoiseHistoryFree(void); -void linenoiseClearScreen(void); -void linenoiseSetMultiLine(int ml); -void linenoisePrintKeyCodes(void); -/* the following are extensions to the original linenoise API */ -int linenoiseInstallWindowChangeHandler(void); -/* returns type of key pressed: 1 = CTRL-C, 2 = CTRL-D, 0 = other */ -int linenoiseKeyType(void); - -#ifdef __cplusplus -} -#endif - -#endif /* __LINENOISE_H */ diff --git a/src/linenoise/wcwidth.cpp b/src/linenoise/wcwidth.cpp deleted file mode 100644 index deec0ba6..00000000 --- a/src/linenoise/wcwidth.cpp +++ /dev/null @@ -1,315 +0,0 @@ -/* - * This is an implementation of wcwidth() and wcswidth() (defined in - * IEEE Std 1002.1-2001) for Unicode. - * - * http://www.opengroup.org/onlinepubs/007904975/functions/wcwidth.html - * http://www.opengroup.org/onlinepubs/007904975/functions/wcswidth.html - * - * In fixed-width output devices, Latin characters all occupy a single - * "cell" position of equal width, whereas ideographic CJK characters - * occupy two such cells. Interoperability between terminal-line - * applications and (teletype-style) character terminals using the - * UTF-8 encoding requires agreement on which character should advance - * the cursor by how many cell positions. No established formal - * standards exist at present on which Unicode character shall occupy - * how many cell positions on character terminals. These routines are - * a first attempt of defining such behavior based on simple rules - * applied to data provided by the Unicode Consortium. - * - * For some graphical characters, the Unicode standard explicitly - * defines a character-cell width via the definition of the East Asian - * FullWidth (F), Wide (W), Half-width (H), and Narrow (Na) classes. - * In all these cases, there is no ambiguity about which width a - * terminal shall use. For characters in the East Asian Ambiguous (A) - * class, the width choice depends purely on a preference of backward - * compatibility with either historic CJK or Western practice. - * Choosing single-width for these characters is easy to justify as - * the appropriate long-term solution, as the CJK practice of - * displaying these characters as double-width comes from historic - * implementation simplicity (8-bit encoded characters were displayed - * single-width and 16-bit ones double-width, even for Greek, - * Cyrillic, etc.) and not any typographic considerations. - * - * Much less clear is the choice of width for the Not East Asian - * (Neutral) class. Existing practice does not dictate a width for any - * of these characters. It would nevertheless make sense - * typographically to allocate two character cells to characters such - * as for instance EM SPACE or VOLUME INTEGRAL, which cannot be - * represented adequately with a single-width glyph. The following - * routines at present merely assign a single-cell width to all - * neutral characters, in the interest of simplicity. This is not - * entirely satisfactory and should be reconsidered before - * establishing a formal standard in this area. At the moment, the - * decision which Not East Asian (Neutral) characters should be - * represented by double-width glyphs cannot yet be answered by - * applying a simple rule from the Unicode database content. Setting - * up a proper standard for the behavior of UTF-8 character terminals - * will require a careful analysis not only of each Unicode character, - * but also of each presentation form, something the author of these - * routines has avoided to do so far. - * - * http://www.unicode.org/unicode/reports/tr11/ - * - * Markus Kuhn -- 2007-05-26 (Unicode 5.0) - * - * Permission to use, copy, modify, and distribute this software - * for any purpose and without fee is hereby granted. The author - * disclaims all warranties with regard to this software. - * - * Latest version: http://www.cl.cam.ac.uk/~mgk25/ucs/wcwidth.c - */ - -#include -#include -#include - -namespace linenoise_ng { - -struct interval { - char32_t first; - char32_t last; -}; - -/* auxiliary function for binary search in interval table */ -static int bisearch(char32_t ucs, const struct interval *table, int max) { - int min = 0; - int mid; - - if (ucs < table[0].first || ucs > table[max].last) - return 0; - while (max >= min) { - mid = (min + max) / 2; - if (ucs > table[mid].last) - min = mid + 1; - else if (ucs < table[mid].first) - max = mid - 1; - else - return 1; - } - - return 0; -} - - -/* The following two functions define the column width of an ISO 10646 - * character as follows: - * - * - The null character (U+0000) has a column width of 0. - * - * - Other C0/C1 control characters and DEL will lead to a return - * value of -1. - * - * - Non-spacing and enclosing combining characters (general - * category code Mn or Me in the Unicode database) have a - * column width of 0. - * - * - SOFT HYPHEN (U+00AD) has a column width of 1. - * - * - Other format characters (general category code Cf in the Unicode - * database) and ZERO WIDTH SPACE (U+200B) have a column width of 0. - * - * - Hangul Jamo medial vowels and final consonants (U+1160-U+11FF) - * have a column width of 0. - * - * - Spacing characters in the East Asian Wide (W) or East Asian - * Full-width (F) category as defined in Unicode Technical - * Report #11 have a column width of 2. - * - * - All remaining characters (including all printable - * ISO 8859-1 and WGL4 characters, Unicode control characters, - * etc.) have a column width of 1. - * - * This implementation assumes that wchar_t characters are encoded - * in ISO 10646. - */ - -int mk_wcwidth(char32_t ucs) -{ - /* sorted list of non-overlapping intervals of non-spacing characters */ - /* generated by "uniset +cat=Me +cat=Mn +cat=Cf -00AD +1160-11FF +200B c" */ - static const struct interval combining[] = { - { 0x0300, 0x036F }, { 0x0483, 0x0486 }, { 0x0488, 0x0489 }, - { 0x0591, 0x05BD }, { 0x05BF, 0x05BF }, { 0x05C1, 0x05C2 }, - { 0x05C4, 0x05C5 }, { 0x05C7, 0x05C7 }, { 0x0600, 0x0603 }, - { 0x0610, 0x0615 }, { 0x064B, 0x065E }, { 0x0670, 0x0670 }, - { 0x06D6, 0x06E4 }, { 0x06E7, 0x06E8 }, { 0x06EA, 0x06ED }, - { 0x070F, 0x070F }, { 0x0711, 0x0711 }, { 0x0730, 0x074A }, - { 0x07A6, 0x07B0 }, { 0x07EB, 0x07F3 }, { 0x0901, 0x0902 }, - { 0x093C, 0x093C }, { 0x0941, 0x0948 }, { 0x094D, 0x094D }, - { 0x0951, 0x0954 }, { 0x0962, 0x0963 }, { 0x0981, 0x0981 }, - { 0x09BC, 0x09BC }, { 0x09C1, 0x09C4 }, { 0x09CD, 0x09CD }, - { 0x09E2, 0x09E3 }, { 0x0A01, 0x0A02 }, { 0x0A3C, 0x0A3C }, - { 0x0A41, 0x0A42 }, { 0x0A47, 0x0A48 }, { 0x0A4B, 0x0A4D }, - { 0x0A70, 0x0A71 }, { 0x0A81, 0x0A82 }, { 0x0ABC, 0x0ABC }, - { 0x0AC1, 0x0AC5 }, { 0x0AC7, 0x0AC8 }, { 0x0ACD, 0x0ACD }, - { 0x0AE2, 0x0AE3 }, { 0x0B01, 0x0B01 }, { 0x0B3C, 0x0B3C }, - { 0x0B3F, 0x0B3F }, { 0x0B41, 0x0B43 }, { 0x0B4D, 0x0B4D }, - { 0x0B56, 0x0B56 }, { 0x0B82, 0x0B82 }, { 0x0BC0, 0x0BC0 }, - { 0x0BCD, 0x0BCD }, { 0x0C3E, 0x0C40 }, { 0x0C46, 0x0C48 }, - { 0x0C4A, 0x0C4D }, { 0x0C55, 0x0C56 }, { 0x0CBC, 0x0CBC }, - { 0x0CBF, 0x0CBF }, { 0x0CC6, 0x0CC6 }, { 0x0CCC, 0x0CCD }, - { 0x0CE2, 0x0CE3 }, { 0x0D41, 0x0D43 }, { 0x0D4D, 0x0D4D }, - { 0x0DCA, 0x0DCA }, { 0x0DD2, 0x0DD4 }, { 0x0DD6, 0x0DD6 }, - { 0x0E31, 0x0E31 }, { 0x0E34, 0x0E3A }, { 0x0E47, 0x0E4E }, - { 0x0EB1, 0x0EB1 }, { 0x0EB4, 0x0EB9 }, { 0x0EBB, 0x0EBC }, - { 0x0EC8, 0x0ECD }, { 0x0F18, 0x0F19 }, { 0x0F35, 0x0F35 }, - { 0x0F37, 0x0F37 }, { 0x0F39, 0x0F39 }, { 0x0F71, 0x0F7E }, - { 0x0F80, 0x0F84 }, { 0x0F86, 0x0F87 }, { 0x0F90, 0x0F97 }, - { 0x0F99, 0x0FBC }, { 0x0FC6, 0x0FC6 }, { 0x102D, 0x1030 }, - { 0x1032, 0x1032 }, { 0x1036, 0x1037 }, { 0x1039, 0x1039 }, - { 0x1058, 0x1059 }, { 0x1160, 0x11FF }, { 0x135F, 0x135F }, - { 0x1712, 0x1714 }, { 0x1732, 0x1734 }, { 0x1752, 0x1753 }, - { 0x1772, 0x1773 }, { 0x17B4, 0x17B5 }, { 0x17B7, 0x17BD }, - { 0x17C6, 0x17C6 }, { 0x17C9, 0x17D3 }, { 0x17DD, 0x17DD }, - { 0x180B, 0x180D }, { 0x18A9, 0x18A9 }, { 0x1920, 0x1922 }, - { 0x1927, 0x1928 }, { 0x1932, 0x1932 }, { 0x1939, 0x193B }, - { 0x1A17, 0x1A18 }, { 0x1B00, 0x1B03 }, { 0x1B34, 0x1B34 }, - { 0x1B36, 0x1B3A }, { 0x1B3C, 0x1B3C }, { 0x1B42, 0x1B42 }, - { 0x1B6B, 0x1B73 }, { 0x1DC0, 0x1DCA }, { 0x1DFE, 0x1DFF }, - { 0x200B, 0x200F }, { 0x202A, 0x202E }, { 0x2060, 0x2063 }, - { 0x206A, 0x206F }, { 0x20D0, 0x20EF }, { 0x302A, 0x302F }, - { 0x3099, 0x309A }, { 0xA806, 0xA806 }, { 0xA80B, 0xA80B }, - { 0xA825, 0xA826 }, { 0xFB1E, 0xFB1E }, { 0xFE00, 0xFE0F }, - { 0xFE20, 0xFE23 }, { 0xFEFF, 0xFEFF }, { 0xFFF9, 0xFFFB }, - { 0x10A01, 0x10A03 }, { 0x10A05, 0x10A06 }, { 0x10A0C, 0x10A0F }, - { 0x10A38, 0x10A3A }, { 0x10A3F, 0x10A3F }, { 0x1D167, 0x1D169 }, - { 0x1D173, 0x1D182 }, { 0x1D185, 0x1D18B }, { 0x1D1AA, 0x1D1AD }, - { 0x1D242, 0x1D244 }, { 0xE0001, 0xE0001 }, { 0xE0020, 0xE007F }, - { 0xE0100, 0xE01EF } - }; - - /* test for 8-bit control characters */ - if (ucs == 0) - return 0; - if (ucs < 32 || (ucs >= 0x7f && ucs < 0xa0)) - return -1; - - /* binary search in table of non-spacing characters */ - if (bisearch(ucs, combining, - sizeof(combining) / sizeof(struct interval) - 1)) - return 0; - - /* if we arrive here, ucs is not a combining or C0/C1 control character */ - - return 1 + - (ucs >= 0x1100 && - (ucs <= 0x115f || /* Hangul Jamo init. consonants */ - ucs == 0x2329 || ucs == 0x232a || - (ucs >= 0x2e80 && ucs <= 0xa4cf && - ucs != 0x303f) || /* CJK ... Yi */ - (ucs >= 0xac00 && ucs <= 0xd7a3) || /* Hangul Syllables */ - (ucs >= 0xf900 && ucs <= 0xfaff) || /* CJK Compatibility Ideographs */ - (ucs >= 0xfe10 && ucs <= 0xfe19) || /* Vertical forms */ - (ucs >= 0xfe30 && ucs <= 0xfe6f) || /* CJK Compatibility Forms */ - (ucs >= 0xff00 && ucs <= 0xff60) || /* Fullwidth Forms */ - (ucs >= 0xffe0 && ucs <= 0xffe6) || - (ucs >= 0x20000 && ucs <= 0x2fffd) || - (ucs >= 0x30000 && ucs <= 0x3fffd))); -} - - -int mk_wcswidth(const char32_t* pwcs, size_t n) -{ - int w, width = 0; - - for (;*pwcs && n-- > 0; pwcs++) - if ((w = mk_wcwidth(*pwcs)) < 0) - return -1; - else - width += w; - - return width; -} - - -/* - * The following functions are the same as mk_wcwidth() and - * mk_wcswidth(), except that spacing characters in the East Asian - * Ambiguous (A) category as defined in Unicode Technical Report #11 - * have a column width of 2. This variant might be useful for users of - * CJK legacy encodings who want to migrate to UCS without changing - * the traditional terminal character-width behaviour. It is not - * otherwise recommended for general use. - */ -int mk_wcwidth_cjk(wchar_t ucs) -{ - /* sorted list of non-overlapping intervals of East Asian Ambiguous - * characters, generated by "uniset +WIDTH-A -cat=Me -cat=Mn -cat=Cf c" */ - static const struct interval ambiguous[] = { - { 0x00A1, 0x00A1 }, { 0x00A4, 0x00A4 }, { 0x00A7, 0x00A8 }, - { 0x00AA, 0x00AA }, { 0x00AE, 0x00AE }, { 0x00B0, 0x00B4 }, - { 0x00B6, 0x00BA }, { 0x00BC, 0x00BF }, { 0x00C6, 0x00C6 }, - { 0x00D0, 0x00D0 }, { 0x00D7, 0x00D8 }, { 0x00DE, 0x00E1 }, - { 0x00E6, 0x00E6 }, { 0x00E8, 0x00EA }, { 0x00EC, 0x00ED }, - { 0x00F0, 0x00F0 }, { 0x00F2, 0x00F3 }, { 0x00F7, 0x00FA }, - { 0x00FC, 0x00FC }, { 0x00FE, 0x00FE }, { 0x0101, 0x0101 }, - { 0x0111, 0x0111 }, { 0x0113, 0x0113 }, { 0x011B, 0x011B }, - { 0x0126, 0x0127 }, { 0x012B, 0x012B }, { 0x0131, 0x0133 }, - { 0x0138, 0x0138 }, { 0x013F, 0x0142 }, { 0x0144, 0x0144 }, - { 0x0148, 0x014B }, { 0x014D, 0x014D }, { 0x0152, 0x0153 }, - { 0x0166, 0x0167 }, { 0x016B, 0x016B }, { 0x01CE, 0x01CE }, - { 0x01D0, 0x01D0 }, { 0x01D2, 0x01D2 }, { 0x01D4, 0x01D4 }, - { 0x01D6, 0x01D6 }, { 0x01D8, 0x01D8 }, { 0x01DA, 0x01DA }, - { 0x01DC, 0x01DC }, { 0x0251, 0x0251 }, { 0x0261, 0x0261 }, - { 0x02C4, 0x02C4 }, { 0x02C7, 0x02C7 }, { 0x02C9, 0x02CB }, - { 0x02CD, 0x02CD }, { 0x02D0, 0x02D0 }, { 0x02D8, 0x02DB }, - { 0x02DD, 0x02DD }, { 0x02DF, 0x02DF }, { 0x0391, 0x03A1 }, - { 0x03A3, 0x03A9 }, { 0x03B1, 0x03C1 }, { 0x03C3, 0x03C9 }, - { 0x0401, 0x0401 }, { 0x0410, 0x044F }, { 0x0451, 0x0451 }, - { 0x2010, 0x2010 }, { 0x2013, 0x2016 }, { 0x2018, 0x2019 }, - { 0x201C, 0x201D }, { 0x2020, 0x2022 }, { 0x2024, 0x2027 }, - { 0x2030, 0x2030 }, { 0x2032, 0x2033 }, { 0x2035, 0x2035 }, - { 0x203B, 0x203B }, { 0x203E, 0x203E }, { 0x2074, 0x2074 }, - { 0x207F, 0x207F }, { 0x2081, 0x2084 }, { 0x20AC, 0x20AC }, - { 0x2103, 0x2103 }, { 0x2105, 0x2105 }, { 0x2109, 0x2109 }, - { 0x2113, 0x2113 }, { 0x2116, 0x2116 }, { 0x2121, 0x2122 }, - { 0x2126, 0x2126 }, { 0x212B, 0x212B }, { 0x2153, 0x2154 }, - { 0x215B, 0x215E }, { 0x2160, 0x216B }, { 0x2170, 0x2179 }, - { 0x2190, 0x2199 }, { 0x21B8, 0x21B9 }, { 0x21D2, 0x21D2 }, - { 0x21D4, 0x21D4 }, { 0x21E7, 0x21E7 }, { 0x2200, 0x2200 }, - { 0x2202, 0x2203 }, { 0x2207, 0x2208 }, { 0x220B, 0x220B }, - { 0x220F, 0x220F }, { 0x2211, 0x2211 }, { 0x2215, 0x2215 }, - { 0x221A, 0x221A }, { 0x221D, 0x2220 }, { 0x2223, 0x2223 }, - { 0x2225, 0x2225 }, { 0x2227, 0x222C }, { 0x222E, 0x222E }, - { 0x2234, 0x2237 }, { 0x223C, 0x223D }, { 0x2248, 0x2248 }, - { 0x224C, 0x224C }, { 0x2252, 0x2252 }, { 0x2260, 0x2261 }, - { 0x2264, 0x2267 }, { 0x226A, 0x226B }, { 0x226E, 0x226F }, - { 0x2282, 0x2283 }, { 0x2286, 0x2287 }, { 0x2295, 0x2295 }, - { 0x2299, 0x2299 }, { 0x22A5, 0x22A5 }, { 0x22BF, 0x22BF }, - { 0x2312, 0x2312 }, { 0x2460, 0x24E9 }, { 0x24EB, 0x254B }, - { 0x2550, 0x2573 }, { 0x2580, 0x258F }, { 0x2592, 0x2595 }, - { 0x25A0, 0x25A1 }, { 0x25A3, 0x25A9 }, { 0x25B2, 0x25B3 }, - { 0x25B6, 0x25B7 }, { 0x25BC, 0x25BD }, { 0x25C0, 0x25C1 }, - { 0x25C6, 0x25C8 }, { 0x25CB, 0x25CB }, { 0x25CE, 0x25D1 }, - { 0x25E2, 0x25E5 }, { 0x25EF, 0x25EF }, { 0x2605, 0x2606 }, - { 0x2609, 0x2609 }, { 0x260E, 0x260F }, { 0x2614, 0x2615 }, - { 0x261C, 0x261C }, { 0x261E, 0x261E }, { 0x2640, 0x2640 }, - { 0x2642, 0x2642 }, { 0x2660, 0x2661 }, { 0x2663, 0x2665 }, - { 0x2667, 0x266A }, { 0x266C, 0x266D }, { 0x266F, 0x266F }, - { 0x273D, 0x273D }, { 0x2776, 0x277F }, { 0xE000, 0xF8FF }, - { 0xFFFD, 0xFFFD }, { 0xF0000, 0xFFFFD }, { 0x100000, 0x10FFFD } - }; - - /* binary search in table of non-spacing characters */ - if (bisearch(ucs, ambiguous, - sizeof(ambiguous) / sizeof(struct interval) - 1)) - return 2; - - return mk_wcwidth(ucs); -} - - -int mk_wcswidth_cjk(const wchar_t *pwcs, size_t n) -{ - int w, width = 0; - - for (;*pwcs && n-- > 0; pwcs++) - if ((w = mk_wcwidth_cjk(*pwcs)) < 0) - return -1; - else - width += w; - - return width; -} - -} diff --git a/src/nix/local.mk b/src/nix/local.mk index bdcca33d..40a0e8d6 100644 --- a/src/nix/local.mk +++ b/src/nix/local.mk @@ -4,7 +4,6 @@ nix_DIR := $(d) nix_SOURCES := \ $(wildcard $(d)/*.cc) \ - $(wildcard src/linenoise/*.cpp) \ $(wildcard src/build-remote/*.cc) \ $(wildcard src/nix-build/*.cc) \ $(wildcard src/nix-channel/*.cc) \ @@ -18,7 +17,7 @@ nix_SOURCES := \ nix_LIBS = libexpr libmain libstore libutil libformat -nix_LDFLAGS = -pthread $(SODIUM_LIBS) +nix_LDFLAGS = -pthread $(SODIUM_LIBS) $(EDITLINE_LIBS) $(foreach name, \ nix-build nix-channel nix-collect-garbage nix-copy-closure nix-daemon nix-env nix-hash nix-instantiate nix-prefetch-url nix-shell nix-store, \ diff --git a/src/nix/repl.cc b/src/nix/repl.cc index 1bbe256b..7ce37077 100644 --- a/src/nix/repl.cc +++ b/src/nix/repl.cc @@ -1,8 +1,12 @@ #include #include +#include +#include #include +#include + #include "shared.hh" #include "eval.hh" #include "eval-inline.hh" @@ -15,8 +19,6 @@ #include "command.hh" #include "finally.hh" -#include "src/linenoise/linenoise.h" - namespace nix { #define ESC_RED "\033[31m" @@ -118,17 +120,53 @@ NixRepl::NixRepl(const Strings & searchPath, nix::ref store) NixRepl::~NixRepl() { - linenoiseHistorySave(historyFile.c_str()); + write_history(historyFile.c_str()); } - static NixRepl * curRepl; // ugly -static void completionCallback(const char * s, linenoiseCompletions *lc) -{ - /* Otherwise, return all symbols that start with the prefix. */ - for (auto & c : curRepl->completePrefix(s)) - linenoiseAddCompletion(lc, c.c_str()); +static char * completionCallback(char * s, int *match) { + auto possible = curRepl->completePrefix(s); + if (possible.size() == 1) { + *match = 1; + auto *res = strdup(possible.begin()->c_str() + strlen(s)); + if (!res) throw Error("allocation failure"); + return res; + } + + *match = 0; + return nullptr; +} + +static int listPossibleCallback(char *s, char ***avp) { + auto possible = curRepl->completePrefix(s); + + if (possible.size() > (INT_MAX / sizeof(char*))) + throw Error("too many completions"); + + int ac = 0; + char **vp = nullptr; + + auto check = [&](auto *p) { + if (!p) { + if (vp) { + while (--ac >= 0) + free(vp[ac]); + free(vp); + } + throw Error("allocation failure"); + } + return p; + }; + + vp = check((char **)malloc(possible.size() * sizeof(char*))); + + for (auto & p : possible) + vp[ac++] = check(strdup(p.c_str())); + + *avp = vp; + + return ac; } @@ -143,12 +181,16 @@ void NixRepl::mainLoop(const std::vector & files) reloadFiles(); if (!loadedFiles.empty()) std::cout << std::endl; + // Allow nix-repl specific settings in .inputrc + rl_readline_name = "nix-repl"; createDirs(dirOf(historyFile)); - linenoiseHistorySetMaxLen(1000); - linenoiseHistoryLoad(historyFile.c_str()); - + el_hist_size = 1000; + read_history(historyFile.c_str()); + // rl_initialize(); + // linenoiseSetCompletionCallback(completionCallback); curRepl = this; - linenoiseSetCompletionCallback(completionCallback); + rl_set_complete_func(completionCallback); + rl_set_list_possib_func(listPossibleCallback); std::string input; @@ -174,12 +216,6 @@ void NixRepl::mainLoop(const std::vector & files) printMsg(lvlError, format(error + "%1%%2%") % (settings.showTrace ? e.prefix() : "") % e.msg()); } - if (input.size() > 0) { - // Remove trailing newline before adding to history - input.erase(input.size() - 1); - linenoiseHistoryAdd(input.c_str()); - } - // We handled the current input fully, so we should clear it // and read brand new input. input.clear(); @@ -190,19 +226,10 @@ void NixRepl::mainLoop(const std::vector & files) bool NixRepl::getLine(string & input, const std::string &prompt) { - char * s = linenoise(prompt.c_str()); + char * s = readline(prompt.c_str()); Finally doFree([&]() { free(s); }); - if (!s) { - switch (auto type = linenoiseKeyType()) { - case 1: // ctrl-C - input = ""; - return true; - case 2: // ctrl-D - return false; - default: - throw Error(format("Unexpected linenoise keytype: %1%") % type); - } - } + if (!s) + return false; input += s; input += '\n'; return true;