Systemd/fixme

* oneshot services which do not remain: 'exited' instead of 'dead'?
  it should be visible in 'systemctl' that they have been run

* systemd.log_level=debug should overwrite 'quiet' ?

* dot output for --test showing the 'initial transaction'

* have a simple syslog bridge providing /dev/log and forward messages
  to /dev/kmsg. at the moment the real syslog can be started, the bridge
  is stopped and the open /dev/log fd to the real syslog. that way we
  don't lose any early log message, and simple systems have full syslog
  support in the kernel ringbuffer, without any syslog service or disk
  access

* calendar time support in timer, iCalendar semantics for the timer stuff (RFC2445)

* implicitly import "defaults" settings file into all types

* add #ifdefs for non-sysv builds

* "disabled" load state?

* ability to kill services? i.e. in contrast to stopping them, go directly
  into killing mode?

* port over to LISTEN_FDS/LISTEN_PID:

   - uuidd    DONE
   - dbus     DONE
   - rsyslog  DONE
   - rpcbind (/var/run/rpcbind.sock!) DONE
   - cups     DONE
   - avahi-daemon (/var/run/avahi-daemon/socket) DONE
   - ssh      CLASSIC
   - postfix, saslauthd
   - apache/samba
   - libvirtd (/var/run/libvirt/libvirt-sock-ro)
   - bluetoothd (/var/run/sdp! @/org/bluez/audio!)
   - distccd

* write utmp record a la upstart for processes

* selinux policy loading

* fingerprint.target, wireless.target, gps.target

* set_put(), hashmap_put() return values checken. i.e. == 0 macht kein free()!

* fix merging in .swap units

* chkconfig/systemd-install glue

* io priority during initialization

* if a service fails too often, make the service enter maintenance mode, and the socket, too.

* systemctl: warning wenn [Install] leer ist bei enable

* bash completion a la gdbus

* use sulogin

* [Install] section rausmachen für early boot krams, uznd per default nach /lib linken

* s/Exited/Process/ in systemctl status

* systemctl status: "active since 5min"

* systemctl list-jobs deps anzeigen

* /etc/systemd/system.conf: mounten per default option

* ConditionFileExists=, ConditionKernelCommandLine=, ConditionEnvironment= mit !

External:

* place /etc/inittab with explaining blurb.

* procps, psmisc, sysvinit-tools, hostname → util-linux-ng

* nologin nach /var/run https://bugzilla.redhat.com/show_bug.cgi?id=624489

* make sysinit honour forcefsck/fastboot from the kernel command line fsck.mode=auto|force|skip

* get mount point kernel patch into f14

* sysv functions should color when stdout is tty, not stdin

* agetty should not modify baudrate https://bugzilla.redhat.com/show_bug.cgi?id=623685

* ck logging, ssd readahead

* pam: fix double sudo session cleanup:
  http://www.gratisoft.us/bugzilla/show_bug.cgi?id=421

* kernel mount point move

* patch /etc/init.d/functions with:

  if [ $PPID -ne 1 && mountpoint /cgroup/systemd ] ; then echo "You suck!" ; fi

https://bugzilla.redhat.com/show_bug.cgi?id=614245 -- plymouth
https://bugzilla.redhat.com/show_bug.cgi?id=612789 -- umount /cgroup on halt
https://bugzilla.redhat.com/show_bug.cgi?id=612728 -- /etc/rc.d/init.d/functions
https://bugzilla.redhat.com/show_bug.cgi?id=612712 -- pam_systemd
https://bugs.freedesktop.org/show_bug.cgi?id=29193 -- accountsservice
https://bugs.freedesktop.org/show_bug.cgi?id=29194 -- ConsoleKit
https://bugs.freedesktop.org/show_bug.cgi?id=29205 -- udisks
http://article.gmane.org/gmane.linux.bluez.kernel/6479 -- bluez
http://www.spinics.net/lists/linux-nfs/msg14371.html -- rpcbind
https://bugzilla.redhat.com/show_bug.cgi?id=617328 -- ntp
https://bugzilla.redhat.com/show_bug.cgi?id=617320 -- at
https://bugzilla.redhat.com/show_bug.cgi?id=617326 -- fprintd
https://bugzilla.redhat.com/show_bug.cgi?id=617333 -- yum
https://bugzilla.redhat.com/show_bug.cgi?id=617317 -- acpid
https://bugzilla.redhat.com/show_bug.cgi?id=617327 -- gpm
https://bugzilla.redhat.com/show_bug.cgi?id=617330 -- pcsc-lite
https://bugzilla.redhat.com/show_bug.cgi?id=617321 -- audit
https://bugzilla.redhat.com/show_bug.cgi?id=617316 -- abrt
http://sources.redhat.com/bugzilla/show_bug.cgi?id=11930 -- glibc

Regularly:

* look for close() vs. close_nointr() vs. close_nointr_nofail()

* check for strerror(r) instead of strerror(-r)

* Use PR_SET_PROCTITLE_AREA if it becomes available in the kernel

* %m in printf() instead of strerror();

* pahole

* CFLAGS="-Wl,--gc-sections -Wl,--print-gc-sections -ffunction-sections -fdata-sections"
update fixme 2010-08-19 10:02:42 +02:00			`* oneshot services which do not remain: 'exited' instead of 'dead'?`
			`it should be visible in 'systemctl' that they have been run`

update fixme 2010-08-17 09:37:11 +02:00			`* systemd.log_level=debug should overwrite 'quiet' ?`

update fixme 2010-08-10 07:14:46 +02:00			`* dot output for --test showing the 'initial transaction'`
update fixme 2010-08-09 16:19:04 +02:00
fixme update 2010-08-03 23:18:04 +02:00			`* have a simple syslog bridge providing /dev/log and forward messages`
			`to /dev/kmsg. at the moment the real syslog can be started, the bridge`
			`is stopped and the open /dev/log fd to the real syslog. that way we`
			`don't lose any early log message, and simple systems have full syslog`
			`support in the kernel ringbuffer, without any syslog service or disk`
			`access`

pam: implement systemd PAM module and generelize cgroup API for that a bit 2010-06-21 23:27:18 +02:00			`* calendar time support in timer, iCalendar semantics for the timer stuff (RFC2445)`
add fixme todo list 2010-01-26 04:19:18 +01:00
fixme: update todo list 2010-05-16 01:49:45 +02:00			`* implicitly import "defaults" settings file into all types`
add fixme todo list 2010-01-26 04:19:18 +01:00
fixme: update todo list 2010-05-16 01:49:45 +02:00			`* add #ifdefs for non-sysv builds`
add fixme todo list 2010-01-26 04:19:18 +01:00
fixme: update todo list 2010-05-16 01:49:45 +02:00			`* "disabled" load state?`
monitor udev for device changes 2010-01-29 06:45:59 +01:00
fixme: update todo list 2010-05-16 01:49:45 +02:00			`* ability to kill services? i.e. in contrast to stopping them, go directly`
			`into killing mode?`

			`* port over to LISTEN_FDS/LISTEN_PID:`
update fixme 2010-02-05 01:11:01 +01:00
			`- uuidd DONE`
log: handle multi-line log messages properly 2010-05-21 03:31:49 +02:00			`- dbus DONE`
sd-daemon: verify socket family, too 2010-05-21 17:06:40 +02:00			`- rsyslog DONE`
socket: fix parsing of bind_ipv6_only 2010-05-21 23:41:25 +02:00			`- rpcbind (/var/run/rpcbind.sock!) DONE`
			`- cups DONE`
			`- avahi-daemon (/var/run/avahi-daemon/socket) DONE`
fixme: minor updates 2010-02-14 22:45:08 +01:00			`- ssh CLASSIC`
update fixme 2010-02-05 01:11:01 +01:00			`- postfix, saslauthd`
			`- apache/samba`
			`- libvirtd (/var/run/libvirt/libvirt-sock-ro)`
			`- bluetoothd (/var/run/sdp! @/org/bluez/audio!)`
			`- distccd`

unit: add automount units for a number of API filesystems 2010-05-23 01:56:54 +02:00			`* write utmp record a la upstart for processes`

dbus: properly pass capabilities 2010-08-11 23:19:28 +02:00			`* selinux policy loading`
systemctl: reimplement systemctl in pure C without Vala/GObject 2010-06-15 02:51:55 +02:00
unit: consider only_by_dependency setting when clients ask whether a unit is startable 2010-07-17 04:07:49 +02:00			`* fingerprint.target, wireless.target, gps.target`
systemctl: always show units with active jobs in list-units output 2010-07-16 21:31:34 +02:00
install: optionally remove all symlinks from configuration tree recursively 2010-07-18 01:33:05 +02:00			`* set_put(), hashmap_put() return values checken. i.e. == 0 macht kein free()!`

device: do not merge devices Don't try to merge devices that have been created via dependencies when they appear in the system and can be recognized as the same. Instead, simply continue to maintain them independently of each other, however with the same state cycle. Why? Because otherwise we'd have a hard time to seperate the dependencies after the devices are unplugged again and we hence cannot be sure anymore that next time the device is plugged in it will carry the same names. Example: if one depndency refers to dev-sda.device and another one to dev-by-id-xxxyyy.device we only learn at time of plug in of the device that it is actually the same device that was ment. In the moment the device is unplugged again we won't know anymore their relation to each other and the next time the harddisk is plugged it might even appear as dev-by-id-xxxyyy.device and dev-sdb.service. To ensure the dependencies continue to have the meaning they were intended to have let's hence keep the .device objects seperate all the time, even when they are plugged in. This patch also introduces a new Following= property which points from the various .device units of a specific device to the main .device unit for it. This can be used by the client side to figure out the relation of the .device units to each other and even filter units from display. 2010-07-20 20:33:19 +02:00			`* fix merging in .swap units`

update fixme 2010-07-21 20:26:44 +02:00			`* chkconfig/systemd-install glue`

			`* io priority during initialization`
device: do not merge devices Don't try to merge devices that have been created via dependencies when they appear in the system and can be recognized as the same. Instead, simply continue to maintain them independently of each other, however with the same state cycle. Why? Because otherwise we'd have a hard time to seperate the dependencies after the devices are unplugged again and we hence cannot be sure anymore that next time the device is plugged in it will carry the same names. Example: if one depndency refers to dev-sda.device and another one to dev-by-id-xxxyyy.device we only learn at time of plug in of the device that it is actually the same device that was ment. In the moment the device is unplugged again we won't know anymore their relation to each other and the next time the harddisk is plugged it might even appear as dev-by-id-xxxyyy.device and dev-sdb.service. To ensure the dependencies continue to have the meaning they were intended to have let's hence keep the .device objects seperate all the time, even when they are plugged in. This patch also introduces a new Following= property which points from the various .device units of a specific device to the main .device unit for it. This can be used by the client side to figure out the relation of the .device units to each other and even filter units from display. 2010-07-20 20:33:19 +02:00
auto-getty: rework auto console getty logic to work in conjunction with single user mode 2010-08-17 03:29:46 +02:00			`* if a service fails too often, make the service enter maintenance mode, and the socket, too.`
systemctl: accept -p more than once 2010-07-23 05:24:05 +02:00
service/systemctl: don't consider LSB exit codes 5 and 6 as failure, and decode exit codes in systemctl 2010-08-19 03:18:49 +02:00			`* systemctl: warning wenn [Install] leer ist bei enable`
random-seed: honour kernel pool size when saving/restoring seed 2010-08-18 19:38:45 +02:00
modules-load: add systemd-modules-load tool that can load a configured list of modules in /etc/modules.d/ on boot, replacing distro-dependent shell hacks for this 2010-08-19 02:03:03 +02:00			`* bash completion a la gdbus`

log: pass SCM_CREDENTIALS when logging to syslog 2010-08-21 01:51:16 +02:00			`* use sulogin`

			`* [Install] section rausmachen für early boot krams, uznd per default nach /lib linken`

			`* s/Exited/Process/ in systemctl status`

			`* systemctl status: "active since 5min"`

			`* systemctl list-jobs deps anzeigen`

			`* /etc/systemd/system.conf: mounten per default option`

			`* ConditionFileExists=, ConditionKernelCommandLine=, ConditionEnvironment= mit !`

automount: order automount units after fsck, too 2010-08-06 02:23:45 +02:00			`External:`
systemctl: warn when operating on service files that changed on disk but haven't been reloaded 2010-07-17 00:57:51 +02:00
remount: add tool that applies /etc/fstab mount options to all api mounts 2010-08-20 03:26:15 +02:00			`* place /etc/inittab with explaining blurb.`

random-seed: honour kernel pool size when saving/restoring seed 2010-08-18 19:38:45 +02:00			`* procps, psmisc, sysvinit-tools, hostname → util-linux-ng`

systemctl: break output properly for 80ch terminals 2010-08-17 18:53:47 +02:00			`* nologin nach /var/run https://bugzilla.redhat.com/show_bug.cgi?id=624489`

update fixme 2010-08-17 22:50:28 +02:00			`* make sysinit honour forcefsck/fastboot from the kernel command line fsck.mode=auto\|force\|skip`
update fixme 2010-08-17 03:49:49 +02:00
units: make sure getty@xxx.service is always run before gettys.target 2010-08-18 23:10:27 +02:00			`* get mount point kernel patch into f14`

units: move runlevel[2-5] links to /lib because they are legacy and hence should not be as obviously in sight. The user may still override them by placing links in /etc 2010-08-13 19:13:25 +02:00			`* sysv functions should color when stdout is tty, not stdin`
sd-daemon: fix compilation on old systems lacking SOCK_CLOEXEC 2010-08-06 21:33:20 +02:00
update fixme 2010-08-13 04:57:19 +02:00			`* agetty should not modify baudrate https://bugzilla.redhat.com/show_bug.cgi?id=623685`
systemctl: warn when operating on service files that changed on disk but haven't been reloaded 2010-07-17 00:57:51 +02:00
update fixme 2010-08-17 22:50:28 +02:00			`* ck logging, ssd readahead`
systemctl: warn when operating on service files that changed on disk but haven't been reloaded 2010-07-17 00:57:51 +02:00
update fixme 2010-07-21 20:26:44 +02:00			`* pam: fix double sudo session cleanup:`
			`http://www.gratisoft.us/bugzilla/show_bug.cgi?id=421`

update fixme 2010-08-17 22:50:28 +02:00			`* kernel mount point move`

service: honour empty cgroup even in ValidNoProcess mode 2010-06-19 01:06:09 +02:00			`* patch /etc/init.d/functions with:`

			`if [ $PPID -ne 1 && mountpoint /cgroup/systemd ] ; then echo "You suck!" ; fi`

update fixme 2010-07-21 20:26:44 +02:00			`https://bugzilla.redhat.com/show_bug.cgi?id=614245 -- plymouth`
			`https://bugzilla.redhat.com/show_bug.cgi?id=612789 -- umount /cgroup on halt`
			`https://bugzilla.redhat.com/show_bug.cgi?id=612728 -- /etc/rc.d/init.d/functions`
			`https://bugzilla.redhat.com/show_bug.cgi?id=612712 -- pam_systemd`
			`https://bugs.freedesktop.org/show_bug.cgi?id=29193 -- accountsservice`
			`https://bugs.freedesktop.org/show_bug.cgi?id=29194 -- ConsoleKit`
update fixme 2010-07-22 02:26:27 +02:00			`https://bugs.freedesktop.org/show_bug.cgi?id=29205 -- udisks`
			`http://article.gmane.org/gmane.linux.bluez.kernel/6479 -- bluez`
update fixme 2010-07-21 20:26:44 +02:00			`http://www.spinics.net/lists/linux-nfs/msg14371.html -- rpcbind`
unit: rename OnlyByDependency= to RefuseManualStart= and introduce RefuseManualStop= Some unit shall never be start on user request (e.g. shutdown.target) others never be stopped on user request (e.g. auditd.servce), hence offer options for both. 2010-08-10 20:57:21 +02:00			`https://bugzilla.redhat.com/show_bug.cgi?id=617328 -- ntp`
			`https://bugzilla.redhat.com/show_bug.cgi?id=617320 -- at`
			`https://bugzilla.redhat.com/show_bug.cgi?id=617326 -- fprintd`
			`https://bugzilla.redhat.com/show_bug.cgi?id=617333 -- yum`
			`https://bugzilla.redhat.com/show_bug.cgi?id=617317 -- acpid`
			`https://bugzilla.redhat.com/show_bug.cgi?id=617327 -- gpm`
			`https://bugzilla.redhat.com/show_bug.cgi?id=617330 -- pcsc-lite`
			`https://bugzilla.redhat.com/show_bug.cgi?id=617321 -- audit`
service: rename ValidNoProcess= to RemainAfterExit= 2010-08-17 19:37:36 +02:00			`https://bugzilla.redhat.com/show_bug.cgi?id=617316 -- abrt`
log: pass SCM_CREDENTIALS when logging to syslog 2010-08-21 01:51:16 +02:00			`http://sources.redhat.com/bugzilla/show_bug.cgi?id=11930 -- glibc`
fixme: refer to rhbz bugs that need fixing 2010-07-14 15:13:34 +02:00
fixme: update todo list 2010-05-16 01:49:45 +02:00			`Regularly:`
fixme: minor updates 2010-02-14 22:45:08 +01:00
fixme: update todo list 2010-05-16 01:49:45 +02:00			`* look for close() vs. close_nointr() vs. close_nointr_nofail()`
fixme: minor update 2010-02-14 22:47:08 +01:00
fixme: update todo list 2010-05-16 01:49:45 +02:00			`* check for strerror(r) instead of strerror(-r)`
service: optionally call into PAM when dropping priviliges 2010-06-16 21:54:17 +02:00
			`* Use PR_SET_PROCTITLE_AREA if it becomes available in the kernel`
pam: implement systemd PAM module and generelize cgroup API for that a bit 2010-06-21 23:27:18 +02:00
			`* %m in printf() instead of strerror();`
dbus: properly pass capabilities 2010-08-11 23:19:28 +02:00
			`* pahole`

			`* CFLAGS="-Wl,--gc-sections -Wl,--print-gc-sections -ffunction-sections -fdata-sections"`