The idea is that we have strvs like list of server names or addresses, where
the majority of strings is rather short, but some are long and there can
potentially be many strings. So formattting them either all on one line or all
in separate lines leads to output that is either hard to read or uses way too
many rows. We want to wrap them, but relying on the pager to do the wrapping is
not nice. Normal text has a lot of redundancy, so when the pager wraps a line
in the middle of a word the read can understand what is going on without any
trouble. But for a high-density zero-redundancy text like an IP address it is
much nicer to wrap between words. This also makes c&p easier.
This adds a variant of TABLE_STRV which is wrapped on output (with line breaks
inserted between different strv entries).
The change table_print() is quite ugly. A second pass is added to re-calculate
column widths. Since column size is now "soft", i.e. it can adjust based on
available columns, we need to two passes:
- first we figure out how much space we want
- in the second pass we figure out what the actual wrapped columns
widths will be.
To avoid unnessary work, the second pass is only done when we actually have
wrappable fields.
A test is added in test-format-table.
The status string is modeled after our --version output: +enabled -disabled equals=more-info
For example:
Protocols: -DefaultRoute +LLMNR -mDNS -DNSOverTLS DNSSEC=allow-downgrade/supported
We would print the whole string as a single super-long line. Let's nicely
break the text into lines that fit on the screen.
$ COLUMNS=70 build/resolvectl --no-pager nta
Global: home local intranet 23.172.in-addr.arpa lan
18.172.in-addr.arpa 16.172.in-addr.arpa 19.172.in-addr.arpa
25.172.in-addr.arpa 21.172.in-addr.arpa d.f.ip6.arpa
20.172.in-addr.arpa 30.172.in-addr.arpa 17.172.in-addr.arpa
internal 168.192.in-addr.arpa 28.172.in-addr.arpa
22.172.in-addr.arpa 24.172.in-addr.arpa 26.172.in-addr.arpa
corp 10.in-addr.arpa private 29.172.in-addr.arpa test
27.172.in-addr.arpa 31.172.in-addr.arpa
Link 2 (hub0):
Link 4 (enp0s31f6):
Link 5 (wlp4s0):
Link 7 (virbr0): adsfasdfasdfasd.com 21.172.in-addr.arpa lan j b
a.com home d.f.ip6.arpa b.com local 16.172.in-addr.arpa
19.172.in-addr.arpa 18.172.in-addr.arpa 25.172.in-addr.arpa
20.172.in-addr.arpa k i h 23.172.in-addr.arpa
168.192.in-addr.arpa d g intranet 17.172.in-addr.arpa c e.com
30.172.in-addr.arpa a f d.com e internal
Link 8 (virbr0-nic):
Link 9 (vnet0):
Link 10 (vb-rawhide):
Link 15 (wwp0s20f0u2i12):
By making them unsigned comparing them with other sizes is less likely
to trigger compiler warnings regarding signed/unsigned comparisons.
After all sizes (i.e. size_t) are generally assumed to be unsigned, so
these should be too.
Prompted-by: https://github.com/systemd/systemd/pull/17345#issuecomment-709402332
There was some confusion about what POSIX says about variable names:
names shall not contain the character '='. For values to be portable
across systems conforming to POSIX.1-2008, the value shall be composed
of characters from the portable character set (except NUL and as
indicated below).
i.e. it allows almost all ASCII in variable names (without NUL and DEL and
'='). OTOH, it says that *utilities* use a smaller set of characters:
Environment variable names used by the utilities in the Shell and
Utilities volume of POSIX.1-2008 consist solely of uppercase letters,
digits, and the <underscore> ( '_' ) from the characters defined in
Portable Character Set and do not begin with a digit.
When enforcing variable names in environment blocks, we need to use this
first definition, so that we can propagate all valid variables.
I think having non-printable characters in variable names is too much, so
I took out the whitespace stuff from the first definition.
OTOH, when we use *shell syntax*, for example doing variable expansion,
it seems enough to support expansion of variables that the shell would allow.
Fixes#14878,
https://bugzilla.redhat.com/show_bug.cgi?id=1754395,
https://bugzilla.redhat.com/show_bug.cgi?id=1879216.
Latest glibc has deprecated mallinfo(), so it might become unavailable at some point
in the future. There is malloc_info(), but it returns XML, ffs. I think the information
that we get from mallinfo() is quite useful, so let's use mallinfo() if available, and
not otherwise.
This helper alone doesn't make too much sense, but it's preparatory work
for #17274, and I guess it can't hurt to land it early, it does make the
ratelimit code a tiny bit prettier after all.
Currently systemd-detect-virt fails to detect running under PowerVM.
Add code to detect PowerVM based on code in util-linux.
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
THis doesn't change the condition's logic at all, but is an attempt to
make things a bit more readable: instead of checking log_target !=
LOG_TARGET_AUTO let's actually list the targets where we want to
consider journal/syslog/kmsg, to make things a bit less confusing. After
all the message here is not to avoid them if LOG_TARGET_AUTO is set, but
to definitely do them in the other cases.
It always was the intention to expose this as trusted field _TID=, i.e.
automatically determine it from journald via some SCM_xyz field or so,
but this is never happened, and it's unlikely this will be added anytime
soon to the kernel either, hence let's just generate this sender side,
even if it means it's untrusted.
Let's make sure to use strna() on the strings returned by fd_get_path()
where we knowingly ignore any failures. We got this right in most cases,
but two were missing.
We use it pretty much everywhere else, hence use it here too.
This also changes the error generated from EOPNOTSUPP to ENOSYS, to
match the other cases where we do such a check. One user checked for
EOPNOTSUPP which is updated to check for ENOSYS instead.
Similar to free_and_replace. I think this should be uppercase to make it
clear that this is a macro. free_and_replace should probably be uppercased
too.
Define explicit action "kill" for SystemCallErrorNumber=.
In addition to errno code, allow specifying "kill" as action for
SystemCallFilter=.
---
v7: seccomp_parse_errno_or_action() returns -EINVAL if !HAVE_SECCOMP
v6: use streq_ptr(), let errno_to_name() handle bad values, kill processes,
init syscall_errno
v5: actually use seccomp_errno_or_action_to_string(), don't fail bus unit
parsing without seccomp
v4: fix build without seccomp
v3: drop log action
v2: action -> number
In shell, inside of double quotes only a select few chars should be
escaped. If other chars are escaped this has no effect. Correct the list
of chars that need such escaping.
Also, make sure we can read back the stuff we wrote out without loss.
Fixes: #16788
if we allocate a bunch of hash tables all at the same time, with none
earlier than the other, there's a good chance we'll initialize the
shared hash key multiple times, so that some threads will see a
different shared hash key than others.
Let's fix that, and make sure really everyone sees the same hash key.
Fixes: #17007
A variety of sockopts exist both for IPv4 and IPv6 but require a
different pair of sockopt level/option number. Let's add helpers for
these that internally determine the right sockopt to call.
This should shorten code that generically wants to support both ipv4 +
ipv6 and for the first time adds correct support for some cases where we
only called the ipv4 versions, and not the ipv6 options.
When 4dfaa528d4 was first commited its callers relied on `errno` instead of the
return value for error reporting. Which worked fine, since internally
under all conditions base were set — even if ugly and not inline with
our coding style. Things then got broken in
f8606626ed where suddenly additional
syscalls might end up being done in the function, thus corrupting `errno`.
We would set .type to a fake value. All real callers (outside of tests)
immediately overwrite .type with a proper value after calling
socket_address_parse(). So let's not set it and adjust the few places
that relied on it being set to the fake value.
socket_address_parse() is modernized to only set the output argument on
success.
If the interface scope is specified, this changes the meaning of the address
quite significantly. Let's show the IPv6 scope_id if present.
Sadly we don't even have a test for sockaddr_pretty() output :(
This will be implicitly tested through socket_address_parse() later on.
This is useful for duplicating trees that contain hardlinks: we keep
track of potential hardlinks and try to reproduce them within the
destination tree. (We do not hardlink between source and destination!).
This is useful for trees like ostree images which heavily use hardlinks
and which are otherwise exploded into separate copies of all files when
we duplicate the trees.
Behaviour is not identical, as shown by the tests in test-strv.
The combination of EXTRACT_UNQUOTE without EXTRACT_RELAX only appears in
the test, so it doesn't seem particularly important. OTOH, the difference
in handling of squished parameters could make a difference. New behaviour
is what both bash and python do, so I think we can ignore this corner case.
This change has the following advantages:
- the duplication of code paths that do a very similar thing is removed
- extract_one_word() / strv_split_extract() return a proper error code.
The commit 10ce2e0681 inverts the order of
SO_{RCV,SND}BUFFORCE and SO_{RCV,SND}BUF. However, setting buffer size with
SO_{RCV,SND}BUF does not fail even if the requested size is larger than
the kernel limit. Hence, SO_{RCV,SND}BUFFORCE will not use anymore and
the buffer size is always limited by the kernel limit even if we have
the priviledge to ignore the limit.
This makes the buffer size is checked after configuring it with
SO_{RCV,SND}BUF, and if it is still not sufficient, then try to set it
with FORCE command. With this commit, if we have enough priviledge, the
requested buffer size is correctly set.
Hopefully fixes#14417.
On systems that boot without initrd on a btrfs root file systems the
BTRFS_IOC_DEV_INFO ioctl returns /dev/root as backing device. That
sucks, since that is not a real device visible to userspace.
Since this has been that way since forever, and it doesn't look like the
kernel will get fixed soon for this, let's at least generate a useful
error message in this case.
This is not a bug fix, just a tweak to make this more recognizable.
Once the kernel gets fixed to report the correct device nodes in this
case, in a way userspace can make sense of them things will magically
work for systemd, too.
(Note that this doesn't add a log message about this to really all cases
we call get_device() in, but just the main ones that are called in early
boot context, after all all there's no benefit in seeing this message
too many times.)
https://github.com/systemd/systemd/issues/16953https://bugs.freedesktop.org/show_bug.cgi?id=84689https://bugzilla.kernel.org/show_bug.cgi?id=89721
log_debug still returns 0. I think it is legitimate to use 'return log_debug()' to
return 0. It is different than the other functions, since we often want to supress
errors logged at debug level. This case is quite common in the codebase and
we could use 'return log_debug_errno()' to make the code more consise.
For all other variants, a separate return line is required.
Previous commit changes all the non-conforming instances, now we can make it mandatory.
Binaries might not initialize SELinux, e.g. when they normally do not
create files with the SELinux default context.
If they, via an internal libary function, call a _label() function,
mac_selinux_maybe_reload() gets called. Since the SELinux status page
has not been opened, selinux_status_updated() will fail with EINVAL.
This affects particularly test binaries.
Just exit early and avoid confusing debug logs.
I had to move STRV_MAKE to macro.h. There is a circular dependency between
extract-word.h, strv.h, and string-util.h that makes it hard to define the
inline function otherwise.
This simplifies things quite a bit, and is reusable wherever we want to
use statx() later on. Not sure why I didn't do it like this right from
the beginning...
I think this is nicer in general, and here in particular we have a lot
of code like:
static inline IteratedCache* hashmap_iterated_cache_new(Hashmap *h) {
return (IteratedCache*) _hashmap_iterated_cache_new(HASHMAP_BASE(h));
}
and it's visually appealing to use the same whitespace in the function
signature and the cast in the body of the function.
The compiler would do this to, esp. with LTO, but we can short-circuit the
whole process and make everything a bit simpler by avoiding the separate
definition.
(It would be nice to do the same for _set_new(), _set_ensure_allocated()
and other similar functions which are one-line trivial wrappers too. Unfortunately
that would require enum HashmapType to be made public, which we don't want
to do.)
Up to now the capability CAP_SETPCAP was raised implicitly in the
function capability_bounding_set_drop.
This functionality is moved into a new function
(capability_gain_cap_setpcap).
The new function optionally provides the capability set as it was
before raisining CAP_SETPCAP.
I think it's nicer to move it to the left, since the function
is already a pointer by itself, and it just happens to return a pointer,
and the two concepts are completely separate.
Instead of assuming that more-recently modified directories have higher mtime,
just look for any mtime changes, up or down. Since we don't want to remember
individual mtimes, hash them to obtain a single value.
This should help us behave properly in the case when the time jumps backwards
during boot: various files might have mtimes that in the future, but we won't
care. This fixes the following scenario:
We have /etc/systemd/system with T1. T1 is initially far in the past.
We have /run/systemd/generator with time T2.
The time is adjusted backwards, so T2 will be always in the future for a while.
Now the user writes new files to /etc/systemd/system, and T1 is updated to T1'.
Nevertheless, T1 < T1' << T2.
We would consider our cache to be up-to-date, falsely.
This allows us to properly detect mount points, for free. (Also, allows
us to respect btimes that are newer than the cutoff, which should be
useful when people untar file trees in /var/tmp)
Fixes: #16848
There is little point in #defining and #undefining CAP_LAST_CAP multiple times.
The check is only done in developer mode. After all, it's not an error to
compile on a newer kernel, and we shouldn't even warn in that case.
Switch from security_getenforce() and netlink notifications to the
SELinux status page.
This usage saves system calls and will also be the default in
libselinux > 3.1 [1].
[1]: 05bdc03130
Previously:
1. last_error wouldn't be updated with errors from is_dir;
2. We'd always issue a stat(), even for binaries without execute;
3. We used stat() instead of access(), which is cheaper.
This change avoids all of those, by only checking inside X_OK-positive
case whether access() works on the path with an extra slash appended.
Thanks to Lennart for the suggestion.
