When a user logs in, systemd-pam will wait for the user manager instance to
report readiness. We don't need to wait for all the jobs to finish, it
is enough if the basic startup is done and the user manager is responsive.
systemd --user will now send out a READY=1 notification when either of two
conditions becomes true:
- basic.target/start job is gone,
- the initial transaction is done.
Also fixes#2863.
The advantage is that is the name is mispellt, cpp will warn us.
$ git grep -Ee "conf.set\('(HAVE|ENABLE)_" -l|xargs sed -r -i "s/conf.set\('(HAVE|ENABLE)_/conf.set10('\1_/"
$ git grep -Ee '#ifn?def (HAVE|ENABLE)' -l|xargs sed -r -i 's/#ifdef (HAVE|ENABLE)/#if \1/; s/#ifndef (HAVE|ENABLE)/#if ! \1/;'
$ git grep -Ee 'if.*defined\(HAVE' -l|xargs sed -i -r 's/defined\((HAVE_[A-Z0-9_]*)\)/\1/g'
$ git grep -Ee 'if.*defined\(ENABLE' -l|xargs sed -i -r 's/defined\((ENABLE_[A-Z0-9_]*)\)/\1/g'
+ manual changes to meson.build
squash! build-sys: use #if Y instead of #ifdef Y everywhere
v2:
- fix incorrect setting of HAVE_LIBIDN2
In most cases we followed the rule that the special _INVALID and _MAX
values we use in our enums use the full type name as prefix (in contrast
to regular values that we often make shorter), do so for
ExecDirectoryType as well.
No functional changes, just a little bit of renaming to make this code
more like the rest.
This makes sure that if we learn via inotify or another event source
that a cgroup is empty, and we checked that this is indeed the case (as
we might get spurious notifications through inotify, as the inotify
logic through the "cgroups.event" is pretty unspecific and might be
trigger for a variety of reasons), then we'll enqueue a defer event for
it, at a priority lower than SIGCHLD handling, so that we know for sure
that if there's waitid() data for a process we used it before
considering the cgroup empty notification.
Fixes: #6608
We are about to add second cgroup-related queue, called
"cgroup_empty_queue", hence let's rename "cgroup_queue" to
"cgroup_realize_queue" (as that is its purpose) to minimize confusion
about the two queues.
Just a rename, no functional changes.
This way we can safely run manager objects from tests and good timeouts
apply. Without this all timeouts are set 0, which means they fire
instantly, when run from tests which do not explicitly configure them
(the way main.c does).
Now generators are only run in systemd --test mode, where this makes
most sense (how are you going to test what would happen otherwise?).
Fixes#6842.
v2:
- rename test_run to test_run_flags
When running through systemd-analyze verify or with --test, we would
not run generators (environment or unit). But at the end, we would nuke
the generator dirs anyway.
Simplify things by actually running generators of both types, but redirecting
their output to a temporary directory. This has the advantage that we test more
code, and the verification is more complete.
Since now we are not touching the real generator directories, we also don't
delete them, which fixes#5609.
When running in systemd-analyze verify, first_boot was initialized to -1
and never changed, so we'd try to run unit_file_preset_all(). Change the
check to > 0 which is more correct. Also, add a separate test for !test_run,
since we wouldn't want to run presets even if we were in first boot
(or /etc was empty for whatever other reason).
If dbus is already down during shutdown, we can't propagate the cgroup
release message anymore, but that's expected and nothing to warn about.
Hence let's downgrade the message from LOG_WARN to LOG_DEBUG.
Fixes: #6777
Trying to connect otherwise is pointless, because if socket isn't around
we won't connect. However, when dbus.socket is present we attempt to
connect. That attempt can't succeed because we are then supposed
to activate dbus.service as a response to connection from
us. This results in deadlock.
Fixes#6303
The irreversible job mode is required to ensure that shutdown is not
interrupted by the activation of a unit with a conflict.
We already used the correct job mode for `ctrl-alt-del.target`. But not
for `exit.target` (SIGINT of user manager). The SIGRT shutdown signals
also needed fixing.
Also change SIGRTMIN+0 to isolate default.target, instead of starting
it. The previous behaviour was documented. However there was no reason
given for it, nor can we provide one. The problem that isolate is too
aggressive anywhere outside of emergency.target (#2607) is orthogonal.
This feature is "accessible by different means and only really a safety
net"; it is confusing for it to differ from `systemctl default` without
explanation.
`AllowIsolate=yes` is retained on poweroff.target etc. for backwards
compatibility.
`sigpwr.target` is also an obvious candidate for linking to a shutdown
target. Unforunately it is also a possible hook for implementing some
logic like system V init did, reading `/etc/powerstatus`. If we switched
to starting `sigpwr.target` with REPLACE_IRREVERSIBLY, attempts to run
`systemctl shutdown` from it would fail, if they had not thought to set
`DefaultDependencies=no`. We had provided no examples for `sigpwr`, and
the whole idea is cruft to keep legacy people happy. For the moment, I
leave `sigpwr` alone, with no risk of disrupting anyone's
previously-working, half-working, or untested setup.
Fixes#6484. See also #6471
The comment here was misleading: the job can fail to enqueue for reasons
other than the target not existing.
The fallback caused an error to be logged, and dates back to when the
"user" directory was named "session". units/session/exit.target was added
later the same year.
This is consistent with the documentation (man systemd), and the handling
of similar signals. It's also consistent with `systemctl exit`, which is
what most people would expect.
Let's decouple the Manager object from the execution logic a bit more
here too, and simply pass along the fact whether we should
unconditionally chown the runtime/... directories via the ExecFlags
field too.
Let's try to decouple the execution engine a bit from the Unit/Manager
concept, and hence pass one more flag as part of the ExecParameters flags
field.
This commit moves the first-boot system preset-settings evaluation out
of main and into the manager startup logic itself. Notably, it reverses
the order between generators and presets evaluation, so that any changes
performed by first-boot generators are taken into the account by presets
logic.
After this change, units created by a generator can be enabled as part
of a preset.
We just abort startup, without printing any error. Make sure we always
print something, and when we cannot deserialize some unit, just ignore it and
continue.
Fixup for 4bc5d27b94. Without this, we would hang
in daemon-reexec after upgrade.
As a follow-up for db3f45e2d2 let's do the
same for all other cases where we create a FILE* with local scope and
know that no other threads hence can have access to it.
For most cases this shouldn't change much really, but this should speed
dbus introspection and calender time formatting up a bit.
This introduces {State,Cache,Log,Configuration}Directory= those are
similar to RuntimeDirectory=. They create the directories under
/var/lib, /var/cache/, /var/log, or /etc, respectively, with the mode
specified in {State,Cache,Log,Configuration}DirectoryMode=.
This also fixes#6391.
Apart from bugs (as in #6152), this can happen if we ever make
our requirements for environment entries more stringent. As with
the rest of deserialization, we should just warn and continue.
We use our cgroup APIs in various contexts, including from our libraries
sd-login, sd-bus. As we don#t control those environments we can't rely
that the unified cgroup setup logic succeeds, and hence really shouldn't
assert on it.
This more or less reverts 415fc41cea.
Environment file generators are a lot like unit file generators, but not
exactly:
1. environment file generators are run for each manager instance, and their
output is (or at least can be) individualized.
The generators themselves are system-wide, the same for all users.
2. environment file generators are run sequentially, in priority order.
Thus, the lifetime of those files is tied to lifecycle of the manager
instance. Because generators are run sequentially, later generators can use or
modify the output of earlier generators.
Each generator is run with no arguments, and the whole state is stored in the
environment variables. The generator can echo a set of variable assignments to
standard output:
VAR_A=something
VAR_B=something else
This output is parsed, and the next and subsequent generators run with those
updated variables in the environment. After the last generator is done, the
environment that the manager itself exports is updated.
Each generator must return 0, otherwise the output is ignored.
The generators in */user-env-generator are for the user session managers,
including root, and the ones in */system-env-generator are for pid1.
This protocol is generally useful, we might just as well reuse it for the
env. generators.
The implementation is changed a bit: instead of making a new strv and freeing
the old one, just mutate the original. This is much faster with larger arrays,
while in fact atomicity is preserved, since we only either insert the new
entry or not, without being in inconsistent state.
v2:
- fix confusion with return value
The output of processes can be gathered, and passed back to the callee.
(This commit just implements the basic functionality and tests.)
After the preparation in previous commits, the change in functionality is
relatively simple. For coding convenience, alarm is prepared *before* any
children are executed, and not before. This shouldn't matter usually, since
just forking of the children should be pretty quick. One could also argue that
this is more correct, because we will also catch the case when (for whatever
reason), forking itself is slow.
Three callback functions and three levels of serialization are used:
- from individual generator processes to the generator forker
- from the forker back to the main process
- deserialization in the main process
v2:
- replace an structure with an indexed array of callbacks
There is a slight change in behaviour: the user manager for root will create a
temporary file in /run/systemd, not /tmp. I don't think this matters, but
simplifies implementation.
cg_[all_]unified() test whether a specific controller or all controllers are on
the unified hierarchy. While what's being asked is a simple binary question,
the callers must assume that the functions may fail any time, which
unnecessarily complicates their usages. This complication is unnecessary.
Internally, the test result is cached anyway and there are only a few places
where the test actually needs to be performed.
This patch simplifies cg_[all_]unified().
* cg_[all_]unified() are updated to return bool. If the result can't be
decided, assertion failure is triggered. Error handlings from their callers
are dropped.
* cg_unified_flush() is updated to calculate the new result synchrnously and
return whether it succeeded or not. Places which need to flush the test
result are updated to test for failure. This ensures that all the following
cg_[all_]unified() tests succeed.
* Places which expected possible cg_[all_]unified() failures are updated to
call and test cg_unified_flush() before calling cg_[all_]unified(). This
includes functions used while setting up mounts during boot and
manager_setup_cgroup().
Embedding sd_id128_t's in constant strings was rather cumbersome. We had
SD_ID128_CONST_STR which returned a const char[], but it had two problems:
- it wasn't possible to statically concatanate this array with a normal string
- gcc wasn't really able to optimize this, and generated code to perform the
"conversion" at runtime.
Because of this, even our own code in coredumpctl wasn't using
SD_ID128_CONST_STR.
Add a new macro to generate a constant string: SD_ID128_MAKE_STR.
It is not as elegant as SD_ID128_CONST_STR, because it requires a repetition
of the numbers, but in practice it is more convenient to use, and allows gcc
to generate smarter code:
$ size .libs/systemd{,-logind,-journald}{.old,}
text data bss dec hex filename
1265204 149564 4808 1419576 15a938 .libs/systemd.old
1260268 149564 4808 1414640 1595f0 .libs/systemd
246805 13852 209 260866 3fb02 .libs/systemd-logind.old
240973 13852 209 255034 3e43a .libs/systemd-logind
146839 4984 34 151857 25131 .libs/systemd-journald.old
146391 4984 34 151409 24f71 .libs/systemd-journald
It is also much easier to check if a certain binary uses a certain MESSAGE_ID:
$ strings .libs/systemd.old|grep MESSAGE_ID
MESSAGE_ID=%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x
MESSAGE_ID=%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x
MESSAGE_ID=%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x
MESSAGE_ID=%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x
$ strings .libs/systemd|grep MESSAGE_ID
MESSAGE_ID=c7a787079b354eaaa9e77b371893cd27
MESSAGE_ID=b07a249cd024414a82dd00cd181378ff
MESSAGE_ID=641257651c1b4ec9a8624d7a40a9e1e7
MESSAGE_ID=de5b426a63be47a7b6ac3eaac82e2f6f
MESSAGE_ID=d34d037fff1847e6ae669a370e694725
MESSAGE_ID=7d4958e842da4a758f6c1cdc7b36dcc5
MESSAGE_ID=1dee0369c7fc4736b7099b38ecb46ee7
MESSAGE_ID=39f53479d3a045ac8e11786248231fbf
MESSAGE_ID=be02cf6855d2428ba40df7e9d022f03d
MESSAGE_ID=7b05ebc668384222baa8881179cfda54
MESSAGE_ID=9d1aaa27d60140bd96365438aad20286
At -O3, this was printed a hundred times for various callers of
manager_add_job_by_name(). AFAICT, there is no error and `unit` is always
intialized. Nevertheless, add explicit initialization to silence the noise.
src/core/manager.c: In function 'manager_start_target':
src/core/manager.c:1413:16: warning: 'unit' may be used uninitialized in this function [-Wmaybe-uninitialized]
return manager_add_job(m, type, unit, mode, e, ret);
^
src/core/manager.c:1401:15: note: 'unit' was declared here
Unit *unit;
^
We were inconsistent, manager_load_unit_prepare() would crash if _ret was ever NULL.
But none of the callers use NULL. So simplify things and require it to be non-NULL.
If we can, use a memfd for serializing state during a daemon reload or
reexec. Fall back to a file in /run/systemd or /tmp only if memfds are
not available.
See: #5016
That message is emitted by every systemd instance on every resume:
Dec 06 08:03:38 laptop systemd[1]: Time has been changed
Dec 06 08:03:38 laptop systemd[823]: Time has been changed
Dec 06 08:03:38 laptop systemd[916]: Time has been changed
Dec 07 08:00:32 laptop systemd[1]: Time has been changed
Dec 07 08:00:32 laptop systemd[823]: Time has been changed
Dec 07 08:00:32 laptop systemd[916]: Time has been changed
-- Reboot --
Dec 07 08:02:46 laptop systemd[836]: Time has been changed
Dec 07 08:02:46 laptop systemd[1]: Time has been changed
Dec 07 08:02:46 laptop systemd[926]: Time has been changed
Dec 07 19:48:12 laptop systemd[1]: Time has been changed
Dec 07 19:48:12 laptop systemd[836]: Time has been changed
Dec 07 19:48:12 laptop systemd[926]: Time has been changed
...
Fixes#4896.
This add a new message id for the end of user instance startup.
User manager startup is a different beast then the system startup.
Their descriptions are completely different too. Let's just separate
them.
Partially fixes#3351.
Also remove "successful" from the description, since we don't know if
the startup was successful or not.
Zbigniew Jędrzejewski-Szmek