Currently, "reboot" behaves differently in setups with and without logind.
If logind is used (which is probably the more common case) the operation
is asynchronous, we should behave in the same way as "systemctl <verb>".
Let's clean this up, and always expose the same behaviour, regardless if
logind is used or not: let's always make it asynchronous.
See: #6479
Fixes: commit 130246d2e8
Scope units are populated from PIDs specified by the bus client. We do
that when a scope is started. We really shouldn't allow scopes to be
started multiple times, as the PIDs then might be heavily out of date.
Moreover, clients should have the guarantee that any scope they allocate
has a clear runtime cycle which is not repetitive.
Let's properly terminate on SIGTERM or SIGINT. Previously we'd just rely
on the implicit process clean-up logic on UNIX. By shutting down
properly on SIGTERM/SIGINT we make it easier to track down memory leaks
by employing valgrind.
Let's propagate errors correctly, and stick to the usual naming and
behaviour of these functions. Or in other words, make this closer to the
matching code in machined.
This extends the change done in b29f6480ec to other logging functions.
This actually fixes some bugs in callers of log_struct(), for example
config_parse_alias() called 'return log_syntax(..., 0, ...)' which could result
in a bogus non-zero return value.
Calls to log_object() and log_format_iovec() — which is only used by
server_driver_message() — appear correct.
Previously, reading through systemd.exec(5) one might get the idea that
XDG_SEAT and XDG_VTNR are part of the service management logic, but they
are not, they are only set if pam_systemd is part of a PAM stack an
pam_systemd is used.
Hence, let's drop these env vars from the list of env vars, and instead
add a paragraph after the list mentioning that pam_systemd might add
more systemd-specific env vars if included in the PAM stack for a
service that uses PAMName=.
Let's optionally translate BSD exit codes to error strings too.
My first approach on adding this was to turn ExitStatusLevel into a
bitmask rather than a linear level, with one bit for the various feature
bits. However, the exit code ranges are generally not defined
independently from each other, i.e. our own ones are defined with the
LSB ones in mind, and most sets are defined with the ISO C ones.
Hence, instead I changed the existing hierarchy of MINIMAL, SYSTEMD, LSB
with an alias of FULL == LSB, only slightly by seperating FULL and LSB
into two separate levels, so that there's now:
1. MINIMAL (only EXIT_SUCCESS/EXIT_FAILURE)
2. SYSTEMD (incorporating our own exit codes)
3. LSB (like SYSTEMD but adding in LSB service exit codes)
4. FULL (like FULL but adding BSD exit codes)
Note that across the codebase only FULL, SYSTEMD, and MINIMAL are used,
depending on context, how much we know about the process and whether we
are logging for debugging purposes or not. This means the LSB level
wouldn't really have to be separate, but it appeared careless to me to
fold it into FULL along with the BSD exit codes.
Note that this commit doesn't change much for regular codepaths: the
FULL exit status level is only used during debug logging, as a helper to
the user reading the debug logs.
Of course, alloca() shouldn't be used with anything that can grow
without bounds anyway, but let's better safe than sorry, and catch this
early.
Since alloca() is not supposed to return an error we trigger an
assert() instead, which is still better than heap trickery.
Previously we were a bit sloppy with the index and size types of arrays,
we'd regularly use unsigned. While I don't think this ever resulted in
real issues I think we should be more careful there and follow a
stricter regime: unless there's a strong reason not to use size_t for
array sizes and indexes, size_t it should be. Any allocations we do
ultimately will use size_t anyway, and converting forth and back between
unsigned and size_t will always be a source of problems.
Note that on 32bit machines "unsigned" and "size_t" are equivalent, and
on 64bit machines our arrays shouldn't grow that large anyway, and if
they do we have a problem, however that kind of overly large allocation
we have protections for usually, but for overflows we do not have that
so much, hence let's add it.
So yeah, it's a story of the current code being already "good enough",
but I think some extra type hygiene is better.
This patch tries to be comprehensive, but it probably isn't and I missed
a few cases. But I guess we can cover that later as we notice it. Among
smaller fixes, this changes:
1. strv_length()' return type becomes size_t
2. the unit file changes array size becomes size_t
3. DNS answer and query array sizes become size_t
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=76745
Rather than choosing to set or unset any of these flag
use kernel defaults. This patch makes following properties to unset.
UseBPDU = unset
HairPin = unset
FastLeave = unset
AllowPortToBeRoot = unset
UnicastFlood = unset
If an interface name is changed, then the link state, especially
managed or not, may need to be updated, as its corresponding
.link or .network files may be different. So, let's once drop
the link and recreate a new link object.
Fixes#8794.
Based on information provided by phenest in
https://github.com/systemd/systemd/issues/5341.
Those keys map to some special functions in windows, so let's map them
to prog1/prog2 so the user map them to something.
Fixes#5341.
This cleans up handling of MTU values across the codebase. Previously
MTU values where stored sometimes in uint32_t, sometimes in uint16_t,
sometimes unsigned and sometimes in size_t. This now unifies this to
uint32_t across the codebase, as that's what netlink spits out, and what
the majority was already using.
Also, all MTU parameters are now parsed with config_parse_mtu() and
config_parse_ipv6_mtu() is dropped as it is now unneeded.
(Note there is one exception for the MTU typing: in the DCHPv4 code we
continue to process the MTU as uint16_t value, as it is encoded like
that in the protocol, and it's probably better stay close to the
protocol there.)
It's mostly a wrapper around parse_mtu() but with some nicer logging.
The address family is initialized from the "ltype" parameter, so that
configuration file parser tables can be easily declare it.
We use MTUs all over the place, let's add a unified, strict parser for
it, that takes MTU ranges into account.
We already have parse_ifindex() close-by, hence this appears to be a
natural addition, in particular as the range checking is not entirely
trivial to do, as it depends on the protocol used.
If enabling controller for some reason fails we need to clear error
for the FILE stream. Enabling remaining controllers would otherwise
fail because write_string_stream_ts() checks for ferror(f) and returns
-EIO if there is one.
Broken by commit <77fa610b22>.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
This fixes the following warning with clang and meson-0.46.0,
```
WARNING: Passed invalid keyword argument "name".
WARNING: This will become a hard error in the future.
WARNING: Passed invalid keyword argument "name".
WARNING: This will become a hard error in the future.
Compiler for C supports arguments -Wno-typedef-redefinition: YES
WARNING: Passed invalid keyword argument "name".
WARNING: This will become a hard error in the future.
WARNING: Passed invalid keyword argument "name".
WARNING: This will become a hard error in the future.
Compiler for C supports arguments -Wno-gnu-variable-sized-type-not-at-end: YES
```
In particular, this confirms that the Found state needs to remain a bit-field:
$ systemd-analyze dump |grep 'Found: '|sort |uniq -c
105 Found: found-udev
3 Found: found-udev,found-mount
1 Found: found-udev,found-swap
Unfortunately this needs a new binary to do the mount because there's just
too many special steps to outsource this to systemd-mount:
- EPERM needs to be treated specially
- UserRuntimeDir= setting must be obeyed
- SELinux label must be adjusted
This allows user@.service to be started independently of logind.
So 'systemctl start user@nnn' will start the user manager for user nnn.
Logind will start it too when the user logs in, and will stop it (unless
lingering is enabled) when the user logs out.
Fixes#7339.
This removes the UserTasksMax= setting in logind.conf. Instead, the generic
TasksMax= setting on the slice should be used. Instead of a transient unit we
use a drop-in to tweak the default definition of a .slice. It's better to use
the normal unit mechanisms instead of creating units on the fly. This will also
make it easier to start user@.service independently of logind, or set
additional settings like MemoryMax= for user slices.
The setting in logind is removed, because otherwise we would have two sources
of "truth": the slice on disk and the logind config. Instead of trying to
coordinate those two sources of configuration (and maintainer overrides to
both), let's just convert to the new one fully.
Right now now automatic transition mechanism is provided. logind will emit a
hint when it encounters the setting, but otherwise it will be ignored.
Fixes#2556.
