Don't assume that 4MB can be allocated from stack since there could be smaller
DefaultLimitSTACK= in force, so let's use malloc(). NUL terminate the huge
strings by hand, also ensure termination in test_lz4_decompress_partial() and
optimize the memset() for the string.
Some items in /proc and /etc may not be accessible to poor unprivileged users
due to e.g. SELinux, BOFH or both, so check for EACCES and EPERM.
/var/tmp may be a symlink to /tmp and then path_compare() will always fail, so
let's stick to /tmp like elsewhere.
/tmp may be mounted with noexec option and then trying to execute scripts from
there would fail.
Detect and warn if seccomp is already in use, which could make seccomp test
fail if the syscalls are already blocked.
Unset $TMPDIR so it will not break specifier tests where %T is assumed to be
/tmp and %V /var/tmp.
The kernel does not sanitize /proc/cmdline. E.g. when running under qemu, it is
easy to pass a string with newline by mistake. We use read_one_line_file(), so
we would read only the first list of the file, and
write_string_file(WRITE_STRING_FILE_VERIFY_ON_FAILURE) would fail because the
target file is obviously different. Change to a kernel-generated file to avoid
the issue.
v2:
- use /proc/version instead of /proc/uptime for attempted writes, so the test
test passes even if test_write_string_file_verify() takes more than 10 ms ;]
EOF is defined to -1, hence on platforms that have "char" unsigned we
can't compare it as-is, except if we accept an implicit cast. let's make
it an explicit cast, acknowledging the issue.
Fixes: #14118
Coverity was complaining that read() does not terminate the data. But
we did that termination earlier, so covirity is wrong (CID#1402306, CID#1402340).
Let's modernize the style a bit nevertheless.
(size_t) cast is needed to avoid the warning about comparison, iff
the value is not a constant.
Coverity is unhappy because we use "line" in the assert that checks
the return value. It doesn't matter much, but let's clean this up.
Also, let's not assume that /proc/cmdline contains anything.
CID #1400219.
On arm64 with gcc-8.2.1-5.fc29.aarch64:
../src/test/test-fileio.c:645:29: warning: comparison is always false due to limited range of data type [-Wtype-limits]
assert_se(c == EOF || safe_fgetc(f, &c) == 1);
^~
Casting c to int is not enough, gcc is able to figure out that the original
type was unsigned and still warns. So let's just silence the warning like
in test-sizeof.c.
Fixes#10659.
This changes the behaviour of parsing environment files to more closely
follow POSIX shell standards.
This has the effect that these variables defined in a file:
VAR1='\value'
VAR2="\value"
Are now interpreted as `\value` instead of interpreting the `\`
character and interpreting them as `value`.
For more information about the behaviour followed, see:
http://pubs.opengroup.org/onlinepubs/9699919799/utilities/V3_chap02.html#tag_18_02
This splits out a bunch of functions from fileio.c that have to do with
temporary files. Simply to make the header files a bit shorter, and to
group things more nicely.
No code changes, just some rearranging of source files.
Now that we don't (mis-)use the env file parser to parse kernel command
lines there's no need anymore to override the used newline character
set. Let's hence drop the argument and just "\n\r" always. This nicely
simplifies our code.
These lines are generally out-of-date, incomplete and unnecessary. With
SPDX and git repository much more accurate and fine grained information
about licensing and authorship is available, hence let's drop the
per-file copyright notice. Of course, removing copyright lines of others
is problematic, hence this commit only removes my own lines and leaves
all others untouched. It might be nicer if sooner or later those could
go away too, making git the only and accurate source of authorship
information.
This part of the copyright blurb stems from the GPL use recommendations:
https://www.gnu.org/licenses/gpl-howto.en.html
The concept appears to originate in times where version control was per
file, instead of per tree, and was a way to glue the files together.
Ultimately, we nowadays don't live in that world anymore, and this
information is entirely useless anyway, as people are very welcome to
copy these files into any projects they like, and they shouldn't have to
change bits that are part of our copyright header for that.
hence, let's just get rid of this old cruft, and shorten our codebase a
bit.
Most our other parsing functions do this, let's do this here too,
internally we accept that anyway. Also, the closely related
load_env_file() and load_env_file_pairs() also do this, so let's be
systematic.
This simplifies the use of tempfiles in tests and fixes "leaked"
temporary files in test-fileio, test-catalog, test-conf-parser.
Not the whole tree is converted.
We were inconsitently using them in some cases, but in majority not.
Using assignment in assert_se is very common, not an exception like in
'if', so let's drop the extra parens everywhere.
Double newlines (i.e. one empty lines) are great to structure code. But
let's avoid triple newlines (i.e. two empty lines), quadruple newlines,
quintuple newlines, …, that's just spurious whitespace.
It's an easy way to drop 121 lines of code, and keeps the coding style
of our sources a bit tigther.
Files which are installed as-is (any .service and other unit files, .conf
files, .policy files, etc), are left as is. My assumption is that SPDX
identifiers are not yet that well known, so it's better to retain the
extended header to avoid any doubt.
I also kept any copyright lines. We can probably remove them, but it'd nice to
obtain explicit acks from all involved authors before doing that.
This should make it a bit easier to search for real file descriptor leaks.
```
$ valgrind --leak-check=full --track-fds=yes ./build/test-fileio
...
==29457==
==29457== FILE DESCRIPTORS: 4 open at exit.
==29457== Open file descriptor 3: /tmp/test-systemd_writing_tmpfile.lyV5Rc
==29457== at 0x4B9AD9E: open (open.c:43)
==29457== by 0x4B19B24: __gen_tempname (tempname.c:261)
==29457== by 0x4BA5CC3: mkostemp64 (mkostemp64.c:32)
==29457== by 0x48F739B: mkostemp_safe (fileio.c:1206)
==29457== by 0x10D968: test_writing_tmpfile (test-fileio.c:620)
==29457== by 0x10E930: main (test-fileio.c:767)
==29457==
```
This helps get around a bug confusing `glibc` and making the test bail
out with the following error under `asan` on `x86`:
Fatal error: glibc detected an invalid stdio handle
Aborted (core dumped)
The bug has been reported in https://github.com/google/sanitizers/issues/778,
but it is unlikely to be fixed anytime soon.
read_line() is much like getline(), and returns a line read from a
FILE*, of arbitrary sizes. In contrast to gets() it will grow the buffer
dynamically, and in contrast to getline() it will place a user-specified
boundary on the line.
This adds IOVEC_INIT() and IOVEC_MAKE() for initializing iovec structures
from a pointer and a size. On top of these IOVEC_INIT_STRING() and
IOVEC_MAKE_STRING() are added which take a string and automatically
determine the size of the string using strlen().
This patch removes the old IOVEC_SET_STRING() macro, given that
IOVEC_MAKE_STRING() is now useful for similar purposes. Note that the
old IOVEC_SET_STRING() invocations were two characters shorter than the
new ones using IOVEC_MAKE_STRING(), but I think the new syntax is more
readable and more generic as it simply resolves to a C99 literal
structure initialization. Moreover, we can use very similar syntax now
for initializing strings and pointer+size iovec entries. We canalso use
the new macros to initialize function parameters on-the-fly or array
definitions. And given that we shouldn't have so many ways to do the
same stuff, let's just settle on the new macros.
(This also converts some code to use _cleanup_ where dynamically
allocated strings were using IOVEC_SET_STRING() before, to modernize
things a bit)
Sometimes it's useful to provide a default value during an environment
expansion, if the environment variable isn't already set.
For instance $XDG_DATA_DIRS is suppose to default to:
/usr/local/share/:/usr/share/
if it's not yet set. That means callers wishing to augment
XDG_DATA_DIRS need to manually add those two values.
This commit changes replace_env to support the following shell
compatible default value syntax:
XDG_DATA_DIRS=/foo:${XDG_DATA_DIRS:-/usr/local/share/:/usr/share}
Likewise, it's useful to provide an alternate value during an
environment expansion, if the environment variable isn't already set.
For instance, $LD_LIBRARY_PATH will inadvertently search the current
working directory if it starts or ends with a colon, so the following
is usually wrong:
LD_LIBRARY_PATH=/foo/lib:${LD_LIBRARY_PATH}
To address that, this changes replace_env to support the following
shell compatible alternate value syntax:
LD_LIBRARY_PATH=/foo/lib${LD_LIBRARY_PATH:+:${LD_LIBRARY_PATH}}
[zj: gate the new syntax under REPLACE_ENV_ALLOW_EXTENDED switch, so
existing callers are not modified.]