I think 80-wifi-adhoc.network is safe enough, since it just enables
the link-local addressing. But the other two enable DHCP in client
or server modes, and we should not do this by default.
Judging by https://travis-ci.org/systemd/systemd/jobs/604425785
(where the script failed with "tools/coverity.sh: line 45: python: command not found")
python-unversioned-command is no longer installed by default with python2.
Given that it's not the first time python has vanished and it's not clear
what exactly should be installed to make sure it's there, let's just use jq instead.
We slowly added many many conditions over the years, and the text became
very hard to read, because all the terms were squished in one <termitem>.
This rearragnes the text into a new subsection, with minimal grammar changes
and removal of repetitions.
Device tree overlays are a convenient way to patch device trees, e.g.,
add new devices to a device tree or enable/disable devices. This is
useful for non-discoverable but configurable hardware. Device tree
overlays are commonly used for displays on the Raspberry Pi or for
describing the content of FPGA bitstreams.
Add the devicetree-overlay key to boot loader specification entries to
allow boot loaders to apply overlays.
See #13537
It was done for mount units already (see commit 142b8142d7). For the
same reasons and for consistency we should also stop activating automagically
swaps when their device is hot-plugged.
It is pretty common for the service to fail in the initramfs (for example
because certain modules have not been copied over or haven't been built yet in
case of dkms modules). This seems to be more trouble than it is worth. Let's
change the service to simply log any missing modules at error level, but not
fail the whole service.
https://bugzilla.redhat.com/show_bug.cgi?id=1254340
From the bug:
> According to the documentation of systemd.automount if the automoint point is
> automagically created if it doesn't exist yet. This ofcourse means the
> filesystem underneath has to be writable, which for / means not only does
> -.mount need to be started but also systemd-remount-fs.service has to be run,
> which isn't guaranteed by the default automount dependencies.
>
> For .mount units there is an automatic default After= dependency on
> local-fs-pre.target, would probably make sense to do the same for automount
> units to avoid it failing on the corner-case where it has to create directory.
Fixes#13306.
Allow earlier PAM modules to set `systemd.runtime_max_sec`. If they do,
parse it and set it as the `RuntimeMaxUSec=` property of the session
scope, to limit the maximum lifetime of the session. This could be
useful for time-limiting login sessions, for example.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #12035
Just as `RuntimeMaxSec=` is supported for service units, add support for
it to scope units. This will gracefully kill a scope after the timeout
expires from the moment the scope enters the running state.
This could be used for time-limited login sessions, for example.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #12035
Per https://github.com/mesonbuild/meson/issues/5003, ternary doesn't
always work as function args with older versions of meson.
Expand out ternary statements to stay compatible with older versions (< 0.49).
As discussed on systemd-devel [1], in Fedora we get lots of abrt reports
about the watchdog firing [2], but 100% of them seem to be caused by resource
starvation in the machine, and never actual deadlocks in the services being
monitored. Killing the services not only does not improve anything, but it
makes the resource starvation worse, because the service needs cycles to restart,
and coredump processing is also fairly expensive. This adds a configuration option
to allow the value to be changed. If the setting is not set, there is no change.
My plan is to set it to some ridiculusly high value, maybe 1h, to catch cases
where a service is actually hanging.
[1] https://lists.freedesktop.org/archives/systemd-devel/2019-October/043618.html
[2] https://bugzilla.redhat.com/show_bug.cgi?id=1300212
Notifications are only sent for the top object, and not for individual
links. This should be enough for the most obvious cases where somebody
just cares about the effective set of servers.
Fixes#13721.
Virtual filesystems such as sysfs or procfs use kernfs, and kernfs can work
with two sorts of virtual files.
One sort uses "seq_file", and the results of the first read are buffered for
the second read. The other sort uses "raw" reads which always go direct to the
device.
In the later case, the content of the virtual file must be retrieved with a
single read otherwise subsequent read might get the new value instead of
finding EOF immediately. That's the reason why the usage of fread(3) is
prohibited in this case as it always performs a second call to read(2) looking
for EOF which is subject to the race described previously.
Fixes: #13585.
See https://bugzilla.redhat.com/show_bug.cgi?id=1763488: when we say that
'foo@*.service' is not a valid unit name, this is not clear enough. Let's
include the name of the operation that does not support globbing in the
error message:
$ build/systemctl enable 'foo@*.service'
Glob pattern passed to enable, but globs are not supported for this.
Invalid unit name "foo@*.service" escaped as "foo@\x2a.service".
...
The DnsStreamType was added to track different types of DNS TCP streams,
instead of refcounting all of them together. However, the stream type was
not actually set into the stream->type field, so while the reference count
was correctly incremented per-stream-type, the reference count was always
decremented in the cleanup function for stream type 0, leading to
underflow for the type 0 stream (unsigned) refcount, and preventing new
type 0 streams from being created.
Since type 0 is DNS_STREAM_LOOKUP, which is used to communicate with
upstream nameservers, once the refcount underflows the stub resolver
no longer is able to successfully fall back to TCP upstream lookups
for any truncated UDP packets.
This was found because lookups of A records with a large number of
addresses, too much to fit into a single 512 byte DNS UDP reply,
were causing getaddrinfo() to fall back to TCP and trigger this bug,
which then caused the TCP fallback for later large record lookups
to fail with 'connection timed out; no servers could be reached'.
The stream type was introduced in commit:
652ba568c6
Code should not be reached 'Unhandled option' at src/machine-id-setup/machine-id-setup-main.c:97, function parse_argv(). Aborting.
Aborted
This behaviour is not good and will confuse user.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
This change checks each swap partition or file reported in /proc/swaps
to see if it matches the values configured with resume= and
resume_offset= kernel parameters. If a match is found, the matching swap
entry is used as the hibernation location regardless of swap priority.
chase_symlinks() would return negative on error, and either a non-negative status
or a non-negative fd when CHASE_OPEN was given. This made the interface quite
complicated, because dependning on the flags used, we would get two different
"types" of return object. Coverity was always confused by this, and flagged
every use of chase_symlinks() without CHASE_OPEN as a resource leak (because it
would this that an fd is returned). This patch uses a saparate output parameter,
so there is no confusion.
(I think it is OK to have functions which return either an error or an fd. It's
only returning *either* an fd or a non-fd that is confusing.)
.sun_path has 108 bytes, and we'd write a string of 108 bytes + NUL.
I added this test, but I don't know what it was supposed to test. Let's
just remove.
Fixes#13713. CID#1405854.
Zbigniew Jędrzejewski-Szmek