The image build function greps for ExecStart lines in unit files, but some
of them (eg: systemd-firstboot) do not use a full path.
It then falls back to 'type -P' but that only works if you have the binary
installed. For optional binaries like systemd-firstboot, the installation
can then fail.
Manually check if the binary already exists in /[usr/][s]bin.
Usually on Debian ROOTLIBDIR is /lib/<arch triplet>, which is not the right place.
Use pkg-config since we define it, and then fallback to /usr/lib/systemd/user which is
the canonical location.
On both Debian&friends and Fedora dbus/dbus-broker install the user socket/service
under /usr/lib/systemd/user, not /lib/systemd/systemd/user.
I suspect the original version of the regex was written on a system,
which prints both the QEMU version and the QEMU package version in the
--version output, like Fedora:
$ /bin/qemu-system-x86_64 --version
QEMU emulator version 4.2.1 (qemu-4.2.1-1.fc32)
Copyright (c) 2003-2019 Fabrice Bellard and the QEMU Project developers
However, Arch Linux prints only the QEMU version:
$ /bin/qemu-system-x86_64 --version
QEMU emulator version 5.2.0
Copyright (c) 2003-2020 Fabrice Bellard and the QEMU Project developers
This causes the awk regex to not match the version string, since there's
no whitespace after it, causing the version check to fail (as well as the
TEST-36-NUMAPOLICY) as well.
Follow-up for 43b49470d1.
Upgrading to qemu 5.2 breaks TEST-36-NUMAPOLICY like:
qemu-system-x86_64: total memory for NUMA nodes (0x0) should
equal RAM size (0x20000000)
Use the new (as in >=2014) form of memdev in test 36:
-object memory-backend-ram,id=mem0,size=512M -numa node,memdev=mem0,nodeid=0
Since some target systems are as old as qemu 1.5.3 (CentOS7) but the new
kind to specify was added in qemu 2.1 this needs to add version parsing and
add the argument only when qemu is >=5.2.
Fixes#17986.
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
The systemd-user file has been moved from /etc/pam.d into /usr/lib/pam.d,
so test-functions needs to copy it from /usr/lib/pam.d instead.
This will copy it from either location.
When invoking "ldd" to find dependency libraries we already set
$LD_LIBRARY_PATH to point to our own build tree, so that our libraries
are checked, not the host libraries. This is not sufficient howeever, as
libudev is built in a subdir. Add that, too.
We have four legal cases:
1. /usr/lib/os-release exists and /etc/os-release is a symlink to it
2. both exist but /etc/os-release is not a symlink to /usr/lib/os-release
3. only /usr/lib/os-release exists
4. only /etc/os-release exists
The generic setup code in test-functions and create-busybox-image didn't handle
case 3.
The test-specific code in TEST-50 didn't handle 2 (because the general setup
code would only install /etc/os-release in the image and
grep -f /usr/lib/os-release would not work) and 4 (same reason) and would fail
in case 3 in generic setup.
Since the hwdb update from a79be2f807
the systemd-hwdb-update service started timing out under ASan when
compiled with gcc, as we started tripping over the 3 minutes timeout.
This affects only gcc runs, since the current gcc on Arch still suffers
from the detect_stack_use_after_return performance penalty[0]. Until
the fixed gcc is present in the respective repositories, let's bump
the timeout to 4 minutes, as we might not be able to upgrade right
away, due to systemd/systemd#16199.
Before the hwdb update:
[ 7958.292540] systemd[63]: systemd-hwdb-update.service: Executing: /usr/bin/time systemd-hwdb update
[ 7958.304005] systemd[1]: systemd-journald.service: Got notification message from PID 44 (FDSTORE=1)
[ 7958.314434] systemd[1]: systemd-journald.service: Added fd 3 (n/a) to fd store.
[ 8008.520082] systemd[1]: systemd-journald.service: Got notification message from PID 44 (WATCHDOG=1)
[ 8068.520151] systemd[1]: systemd-journald.service: Got notification message from PID 44 (WATCHDOG=1)
[ 8125.682843] time[63]: 84.47user 82.92system 2:47.50elapsed 99%CPU (0avgtext+0avgdata 811512maxresident)k
[ 8125.682843] time[63]: 0inputs+19680outputs (0major+25000853minor)pagefaults 0swaps
After the hwdb update:
[ 6215.491958] systemd[63]: systemd-hwdb-update.service: Executing: /usr/bin/time systemd-hwdb update
[ 6215.503380] systemd[1]: systemd-journald.service: Got notification message from PID 44 (FDSTORE=1)
[ 6215.514172] systemd[1]: systemd-journald.service: Added fd 3 (n/a) to fd store.
[ 6329.392918] systemd[1]: systemd-journald.service: Got notification message from PID 44 (WATCHDOG=1)
[ 6394.920205] time[63]: 89.48user 89.98system 2:59.55elapsed 99%CPU (0avgtext+0avgdata 812764maxresident)k
[ 6394.920205] time[63]: 0inputs+20568outputs (0major+27318354minor)pagefaults 0swaps
[0] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=94910
Prompted by systemd/systemd#16111.
* check if /var is a mountpoint - if not, something went wrong. In case
of systemd/systemd#16111 the /failed file was created, because
systemd-cryptsetup failed, but it ended up being empty, making the result
check incorrectly pass
* forward journal messages to console - if we fail to mount /var,
journald won't flush logs to the persistent storage and we end up
empty handed and with no clue what went wrong
For example, without systemd/systemd#16111 and with this patch:
...
[FAILED] Failed to start systemd-cryptsetup@varcrypt.service.
See 'systemctl status systemd-cryptsetup@varcrypt.service' for details.
[DEPEND] Dependency failed for cryptsetup.target.
...
[ 3.882451] systemd-cryptsetup[581]: Key file /etc/varkey is world-readable. This is not a good idea!
[ 3.883946] systemd-cryptsetup[581]: WARNING: Locking directory /run/cryptsetup is missing!
[ 3.884846] systemd-cryptsetup[581]: Failed to load Bitlocker superblock on device /dev/disk/by-uuid/180ba5ef-873b-4018-9968-47c23431f71a: Invalid argument
...
[ 4.099451] sh[606]: + mountpoint /var
[ 4.100025] sh[603]: + systemctl poweroff --no-block
[ 4.101636] systemd[1]: Finished systemd-user-sessions.service.
[ 4.102598] sh[608]: /var is not a mountpoint
[FAILED] Failed to start testsuite-02.service.
Let's create new images public by default and then symlink/copy them
into the respective private directories afterwards, not the other way
around. This should fix a nasty race condition in parallel runs where
one tests attempts to copy the backing public image at the same moment
another test is already modifying it.
Support running tests in parallel by switching to copying of the
base image instead of symlinking it..
This still requires some setup steps, like running `make setup` on tests
which have unique $IMAGE_NAME beforehand (and sequentially), otherwise
they'll all try to create the same base image when started in parallel,
leading to nasty issues. However, as running the integration tests in
parallel is such an unusual use case it should be good enough, for now.
As Debian/Ubuntu use /lib/systemd instead of /usr/lib/systemd,
add systemd-journal-remote to the list of programs that test-functions
detects the correct path to, and replace its direct usage with
$SYSTEMD_JOURNAL_REMOTE
Also use $JOURNALCTL instead of journalctl.
Also minor correction in install_plymouth() to look in /lib/... as
well as /usr/lib/... and /etc/...
Remove the artifact files indicating test result (testok, failed, and
skipped) just before running the test so we always get the latest and
most relevant result instead of incorrectly consuming previous results.
Discovered in https://github.com/systemd/systemd/pull/15378#issuecomment-616801873
This doesn't really matter, since in non-/usr-merged systems plymouth
needs to be in /bin and on merged ones it doesn't matter, but it is
still prettier to insert the right path, and avoid /bin on merged
systems, since it's just a compat symlink.
Replaces: #15351
Using s-j-remote fixes the following issue: when coalescing files from multiple
inputs, simply copying all files with into the the same directory might
potentially mess things up, because a newer system.journal might overwrite an
older journal. This happens because we run multiple tests from the same image,
and need to clean out the directory after each run.
By using systemd-journal-remote, we nicely coalesce all files. This has the
advantage that if there aren't too many logs, we end up with just one journal
file.
ARTIFACT_DIRECTORY is for ubuntuautopackagetests, where the journal files are
copied to a separate directory to preserve after tests have been run. This
functionality can now be recreated by setting
ARTIFACT_DIRECTORY=$AUTOPKGTEST_ARTIFACTS.
It is more trouble than it is worth. The setup is of a loopback device
is very quick, so it's better to always create it when needed and
immediately drop afterwards.
This causes the unprivileged-nspawn-root directory to be removed
after running one test. The advantage is that we reduce the maximum
disk-space use quite a bit (47*400 MB → about 18GB).
has-overflow was a temporary hack that was removed in
844da987ef (Oct. 2016). All the makefiles
can be the same, and all the targets can be handled identically.
Before, we'd copy the test tree into nspawn-root, and run the tests from there.
This is OK, and doesn't actually take much extra time. But it uses quite a lot
of extra disk space. So let's make things a bit more efficient by running
directly from the image file.
We still run the unprivileged nspawn tests from a copy. Once the kernel
implements fs shift, we can do away with that too.
Before, we'd create a separate image for each test, in
/var/tmp/systemd-test.XXXXX/rootdisk.img. Most of the images
where very similar, except that each one had some unit files installed
specifically for the test. The installation of those custom unit files
was removed in previous commits (all the unit files are always installed).
The new approach is to only create as few distinct images as possible.
We have:
default.img: the "normal" image suitable for almost all the tests
basic.img: the same as default image but doesn't mask any services
cryptsetup.img: p2 is used for encrypted /var
badid.img: /etc/machine-id is overwritten with stuff
selinux.img: with selinux added for fun and fun
and a few others:
ls -l build/test/*img
lrwxrwxrwx 1 root root 38 Mar 21 21:23 build/test/badid.img -> /var/tmp/systemd-test.PJFFeo/badid.img
lrwxrwxrwx 1 root root 38 Mar 21 21:17 build/test/basic.img -> /var/tmp/systemd-test.na0xOI/basic.img
lrwxrwxrwx 1 root root 43 Mar 21 21:18 build/test/cryptsetup.img -> /var/tmp/systemd-test.Tzjv06/cryptsetup.img
lrwxrwxrwx 1 root root 40 Mar 21 21:19 build/test/default.img -> /var/tmp/systemd-test.EscAsS/default.img
lrwxrwxrwx 1 root root 39 Mar 21 21:22 build/test/nspawn.img -> /var/tmp/systemd-test.HSebKo/nspawn.img
lrwxrwxrwx 1 root root 40 Mar 21 21:20 build/test/selinux.img -> /var/tmp/systemd-test.daBjbx/selinux.img
lrwxrwxrwx 1 root root 39 Mar 21 21:21 build/test/test08.img -> /var/tmp/systemd-test.OgnN8Z/test08.img
I considered trying to use the same image everywhere. It would probably be
possible, but it would be very brittle. By using separate images where it is
necessary we keep various orthogonal modifications independent.
The way that images are cached is complicated by the fact that we still
want to keep them in /var/tmp. Thus, an image is created on first use and
linked to from build/test/ so it can be found by other tests.
Tests cannot be run in parallel. I think that is an acceptable limitation.
Creation of the images was probably taking more resources then the actual
tests, so we should be better off anyway.
We had an fstab for the sole purpose of remounting "/" rw. Mounting root ro
is a pointless excercise in obsolete approaches. More importantly, the nspawn
image is now the same as the qemu one.
The two timezone files are now installed in the global setup. I am not too
happy about this, but it still seems better than to create a completely
separate image just for this.
Luca Boccassi