The kernel interface requires setting up read-only bind-mounts in
two steps, the bind first and then a read-only remount.
Fix nspawn-mount, and cover this case in the integration test.
Fixes#16484
When the RTC time at boot is off in the future by a few days, OnCalendar=
timers will be scheduled based on the time at boot. But if the time has been
adjusted since boot, the timers will end up scheduled way in the future, which
may cause them not to fire as shortly or often as expected.
Update the logic so that the time will be adjusted based on monotonic time.
We do that by calculating the adjusted manager startup realtime from the
monotonic time stored at that time, by comparing that time with the realtime
and monotonic time of the current time.
Added a test case to validate this works as expected. The test case creates a
QEMU virtual machine with the clock 3 days in the future. Then we adjust the
clock back 3 days, and test creating a timer with an OnCalendar= for every 15
minutes. We also check the manager startup timestamp from both `systemd-analyze
dump` and from D-Bus.
Test output without the corresponding code changes that fix the issue:
Timer elapse outside of the expected 20 minute window.
next_elapsed=1594686119
now=1594426921
time_delta=259198
With the code changes in, the test passes as expected.
For some reason the wait-online is failing intermittently; it's unclear
exactly why, but this hopefully avoids the failure for unrelated PR.
This is a workaround (not fix) for #16105
Several recent failed runs show that the test is still racy in two ways:
1) Sometimes it takes a while before the PID file is created, leading
to:
```
[ 10.950540] testsuite-47.sh[308]: ++ cat /leakedtestpid
[ 10.959712] testsuite-47.sh[308]: cat: /leakedtestpid: No such file or directory
[ 10.959824] testsuite-47.sh[298]: + leaked_pid=
```
2) Again, sometimes we check the leaked PID before the unit is actually
stopped, leading to a false negative:
```
[ 18.099599] testsuite-47.sh[346]: ++ cat /leakedtestpid
[ 18.116462] testsuite-47.sh[333]: + leaked_pid=342
[ 18.117101] testsuite-47.sh[333]: + systemctl stop testsuite-47-repro
...
[ 20.033907] testsuite-47.sh[333]: + ps -p 342
[ 20.080050] testsuite-47.sh[351]: PID TTY TIME CMD
[ 20.080050] testsuite-47.sh[351]: 342 ? 00:00:00 sleep
[ 20.082040] testsuite-47.sh[333]: + exit 42
```
Add support for creating a MACVLAN interface in "source" mode by
specifying Mode=source in the [MACVLAN] section of a .netdev file.
A list of allowed MAC addresses for the corresponding MACVLAN can also
be specified with the SourceMACAddress= option of the [MACVLAN] section.
An example .netdev file:
[NetDev]
Name=macvlan0
Kind=macvlan
MACAddress=02:DE:AD:BE:EF:00
[MACVLAN]
Mode=source
SourceMACAddress=02:AB:AB:AB:AB:01 02:CD:CD:CD:CD:01
SourceMACAddress=02:EF:EF:EF:EF:01
The same keys can also be specified in [MACVTAP] for MACVTAP kinds of
interfaces, with the same semantics.
The fuzzer test case has a giant line with ";;;;;;;;;;;..." which is turned into
a strv of empty strings. Unfortunately, when pushing each string, strv_push() needs
to walk the whole array, which leads to quadratic behaviour. So let's use
greedy_allocation here and also keep location in the string to avoid iterating.
build/fuzz-xdg-desktop test/fuzz/fuzz-xdg-desktop/oss-fuzz-22812 51.10s user 0.01s system 99% cpu 51.295 total
↓
build/fuzz-xdg-desktop test/fuzz/fuzz-xdg-desktop/oss-fuzz-22812 0.07s user 0.01s system 96% cpu 0.083 total
Fixes https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=22812.
Other minor changes:
- say "was already defined" instead of "defined multiple times" to make it
clear that we're ignoring this second definition, and not all definitions
of the key
- unescaping needs to be done also for the last entry
When a command asks to load a unit directly and it is in state
UNIT_NOT_FOUND, and the cache is outdated, we refresh it and
attempto to load again.
Use the same logic when building up a transaction and a dependency in
UNIT_NOT_FOUND state is encountered.
Update the unit test to exercise this code path.
SIG-prefixed signals for `kill` are not POSIX compliant, so on Ubuntu CI
(which defaults to dash instead of bash) the TEST-52 contains following
error:
[ 9693.549638] sh[51]: + systemctl poweroff --no-block
[ 9693.553130] systemd-logind[26]: System is powering down.
[ 9693.608911] sh[54]: /bin/sh: 1: kill: Illegal option -S
This can be reproduced manually as well, either by running dash, or bash
in POSIX mode:
$ dash -c 'kill -SIGKILL 123'
dash: 1: kill: Illegal option -S
$ bash --posix -c 'kill -SIGKILL 123'
bash: line 0: kill: SIGKILL: invalid signal specification
SR-IOV provides the ability to partition a single physical PCI
resource into virtual PCI functions which can then be injected in
to a VM. In the case of network VFs, SR-IOV improves north-south n
etwork performance (that is, traffic with endpoints outside the
host machine) by allowing traffic to bypass the host machine’s network stack.
When the system is under heavy load, it can happen that the unit cache
is refreshed for an unrelated reason (in the test I simulate this by
attempting to start a non-existing unit). The new unit is found and
accounted for in the cache, but it's ignored since we are loading
something else.
When we actually look for it, by attempting to start it, the cache is
up to date so no refresh happens, and starting fails although we have
it loaded in the cache.
When the unit state is set to UNIT_NOT_FOUND, mark the timestamp in
u->fragment_loadtime. Then when attempting to load again we can check
both if the cache itself needs a refresh, OR if it was refreshed AFTER
the last failed attempt that resulted in the state being
UNIT_NOT_FOUND.
Update the test so that this issue reproduces more often.
Since the hwdb update from a79be2f807
the systemd-hwdb-update service started timing out under ASan when
compiled with gcc, as we started tripping over the 3 minutes timeout.
This affects only gcc runs, since the current gcc on Arch still suffers
from the detect_stack_use_after_return performance penalty[0]. Until
the fixed gcc is present in the respective repositories, let's bump
the timeout to 4 minutes, as we might not be able to upgrade right
away, due to systemd/systemd#16199.
Before the hwdb update:
[ 7958.292540] systemd[63]: systemd-hwdb-update.service: Executing: /usr/bin/time systemd-hwdb update
[ 7958.304005] systemd[1]: systemd-journald.service: Got notification message from PID 44 (FDSTORE=1)
[ 7958.314434] systemd[1]: systemd-journald.service: Added fd 3 (n/a) to fd store.
[ 8008.520082] systemd[1]: systemd-journald.service: Got notification message from PID 44 (WATCHDOG=1)
[ 8068.520151] systemd[1]: systemd-journald.service: Got notification message from PID 44 (WATCHDOG=1)
[ 8125.682843] time[63]: 84.47user 82.92system 2:47.50elapsed 99%CPU (0avgtext+0avgdata 811512maxresident)k
[ 8125.682843] time[63]: 0inputs+19680outputs (0major+25000853minor)pagefaults 0swaps
After the hwdb update:
[ 6215.491958] systemd[63]: systemd-hwdb-update.service: Executing: /usr/bin/time systemd-hwdb update
[ 6215.503380] systemd[1]: systemd-journald.service: Got notification message from PID 44 (FDSTORE=1)
[ 6215.514172] systemd[1]: systemd-journald.service: Added fd 3 (n/a) to fd store.
[ 6329.392918] systemd[1]: systemd-journald.service: Got notification message from PID 44 (WATCHDOG=1)
[ 6394.920205] time[63]: 89.48user 89.98system 2:59.55elapsed 99%CPU (0avgtext+0avgdata 812764maxresident)k
[ 6394.920205] time[63]: 0inputs+20568outputs (0major+27318354minor)pagefaults 0swaps
[0] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=94910
https://tools.ietf.org/html/draft-knodel-terminology-02https://lwn.net/Articles/823224/
This gets rid of most but not occasions of these loaded terms:
1. scsi_id and friends are something that is supposed to be removed from
our tree (see #7594)
2. The test suite defines an API used by the ubuntu CI. We can remove
this too later, but this needs to be done in sync with the ubuntu CI.
3. In some cases the terms are part of APIs we call or where we expose
concepts the kernel names the way it names them. (In particular all
remaining uses of the word "slave" in our codebase are like this,
it's used by the POSIX PTY layer, by the network subsystem, the mount
API and the block device subsystem). Getting rid of the term in these
contexts would mean doing some major fixes of the kernel ABI first.
Regarding the replacements: when whitelist/blacklist is used as noun we
replace with with allow list/deny list, and when used as verb with
allow-list/deny-list.
This combines set_ensure_allocated() with set_consume(). The cool thing is that
because we know the hash ops, we can correctly free the item if appropriate.
Similarly to set_consume(), the goal is to simplify handling of the case where
the item needs to be freed on error and if already present in the set.
We'd try to map a zero-byte buffer from a NULL pointer, which is undefined behaviour.
src/systemd/src/libsystemd/sd-bus/bus-message.c:3161:60: runtime error: applying zero offset to null pointer
#0 0x7f6ff064e691 in find_part /work/build/../../src/systemd/src/libsystemd/sd-bus/bus-message.c:3161:60
#1 0x7f6ff0640788 in message_peek_body /work/build/../../src/systemd/src/libsystemd/sd-bus/bus-message.c:3283:16
#2 0x7f6ff064e8db in enter_struct_or_dict_entry /work/build/../../src/systemd/src/libsystemd/sd-bus/bus-message.c:3967:21
#3 0x7f6ff06444ac in bus_message_enter_struct /work/build/../../src/systemd/src/libsystemd/sd-bus/bus-message.c:4009:13
#4 0x7f6ff0641dde in sd_bus_message_enter_container /work/build/../../src/systemd/src/libsystemd/sd-bus/bus-message.c:4136:21
#5 0x7f6ff0619874 in sd_bus_message_dump /work/build/../../src/systemd/src/libsystemd/sd-bus/bus-dump.c:178:29
#6 0x4293d9 in LLVMFuzzerTestOneInput /work/build/../../src/systemd/src/fuzz/fuzz-bus-message.c:39:9
#7 0x441986 in fuzzer::Fuzzer::ExecuteCallback(unsigned char const*, unsigned long) /src/libfuzzer/FuzzerLoop.cpp:558:15
#8 0x44121e in fuzzer::Fuzzer::RunOne(unsigned char const*, unsigned long, bool, fuzzer::InputInfo*, bool*) /src/libfuzzer/FuzzerLoop.cpp:470:3
#9 0x443164 in fuzzer::Fuzzer::ReadAndExecuteSeedCorpora(std::__1::vector<fuzzer::SizedFile, fuzzer::fuzzer_allocator<fuzzer::SizedFile> >&) /src/libfuzzer/FuzzerLoop.cpp:770:7
#10 0x4434bc in fuzzer::Fuzzer::Loop(std::__1::vector<fuzzer::SizedFile, fuzzer::fuzzer_allocator<fuzzer::SizedFile> >&) /src/libfuzzer/FuzzerLoop.cpp:799:3
#11 0x42d2bc in fuzzer::FuzzerDriver(int*, char***, int (*)(unsigned char const*, unsigned long)) /src/libfuzzer/FuzzerDriver.cpp:846:6
#12 0x42978a in main /src/libfuzzer/FuzzerMain.cpp:19:10
#13 0x7f6fef13c82f in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2082f)
#14 0x407808 in _start (out/fuzz-bus-message+0x407808)
