picnoir
/
Systemd
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

doc: correct orthography, word forms and missing/extraneous words

This commit is contained in:
Jan Engelhardt 2014-08-03 07:11:37 +02:00
parent b938cb902c
commit a8eaaee72a
87 changed files with 295 additions and 295 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

18
NEWS
View File

@ -117,7 +117,7 @@ CHANGES WITH 227:
* File descriptors passed during socket activation may now be
named. A new API sd_listen_fds_with_names() is added to
access the names. The default names may be overriden,
access the names. The default names may be overridden,
either in the .socket file using the FileDescriptorName=
parameter, or by passing FDNAME= when storing the file
descriptors using sd_notify().
@ -1209,7 +1209,7 @@ CHANGES WITH 218:
* journalctl gained two new commands --vacuum-size= and
--vacuum-time= to delete old journal files until the
remaining ones take up no more the specified size on disk,
remaining ones take up no more than the specified size on disk,
or are not older than the specified time.
* A new, native PPPoE library has been added to sd-network,
@ -1303,7 +1303,7 @@ CHANGES WITH 218:
a fixed machine ID for subsequent boots.
* networkd's .netdev files now provide a large set of
configuration parameters for VXLAN devices. Similar, the
configuration parameters for VXLAN devices. Similarly, the
bridge port cost parameter is now configurable in .network
files. There's also new support for configuring IP source
routing. networkd .link files gained support for a new
@ -1636,7 +1636,7 @@ CHANGES WITH 216:
* .socket units gained a new DeferAcceptSec= setting that
controls the kernels' TCP_DEFER_ACCEPT sockopt for
TCP. Similar, support for controlling TCP keep-alive
TCP. Similarly, support for controlling TCP keep-alive
settings has been added (KeepAliveTimeSec=,
KeepAliveIntervalSec=, KeepAliveProbes=). Also, support for
turning off Nagle's algorithm on TCP has been added
@ -1852,7 +1852,7 @@ CHANGES WITH 215:
* tmpfiles learnt a new "L+" directive which creates a symlink
but (unlike "L") deletes a pre-existing file first, should
it already exist and not already be the correct
symlink. Similar, "b+", "c+" and "p+" directives have been
symlink. Similarly, "b+", "c+" and "p+" directives have been
added as well, which create block and character devices, as
well as fifos in the filesystem, possibly removing any
pre-existing files of different types.
@ -2035,14 +2035,14 @@ CHANGES WITH 214:
CAP_NET_BROADCAST, CAP_NET_RAW capabilities though, but
loses the ability to write to files owned by root this way.
* Similar, systemd-resolved now runs under its own
* Similarly, systemd-resolved now runs under its own
"systemd-resolve" user with no capabilities remaining.
* Similar, systemd-bus-proxyd now runs under its own
* Similarly, systemd-bus-proxyd now runs under its own
"systemd-bus-proxy" user with only CAP_IPC_OWNER remaining.
* systemd-networkd gained support for setting up "veth"
virtual ethernet devices for container connectivity, as well
virtual Ethernet devices for container connectivity, as well
as GRE and VTI tunnels.
* systemd-networkd will no longer automatically attempt to
@ -2744,7 +2744,7 @@ CHANGES WITH 209:
* The configuration of network interface naming rules for
"permanent interface names" has changed: a new NamePolicy=
setting in the [Link] section of .link files determines the
priority of possible naming schemes (onboard, slot, mac,
priority of possible naming schemes (onboard, slot, MAC,
path). The default value of this setting is determined by
/usr/lib/net/links/99-default.link. Old
80-net-name-slot.rules udev configuration file has been

2
TODO
View File

@ -876,7 +876,7 @@ Features:
- add Scope= parsing option for [Network]
- properly handle routerless dhcp leases
- add more attribute support for SIT tunnel
- work with non-ethernet devices
- work with non-Ethernet devices
- add support for more bond options
* networkd-wait-online:

2
man/bootctl.xml
View File

@ -68,7 +68,7 @@
system.</para>
<para><command>bootctl status</command> checks and prints the
currently installed versions of the boot loader binaries and the
currently installed versions of the boot loader binaries and
all current EFI boot variables.</para>
<para><command>bootctl update</command> updates all installed

12
man/busctl.xml
View File

@ -231,7 +231,7 @@
be augmented with data from
<filename>/proc</filename>. When this is turned on, the data
shown is possibly inconsistent, as the data read from
<filename>/proc</filename> might be more recent than rest of
<filename>/proc</filename> might be more recent than the rest of
the credential information. Defaults to <literal>yes</literal>.</para>
</listitem>
</varlistentry>
@ -281,7 +281,7 @@
<replaceable>SERVICE</replaceable> is specified, show messages
to or from this peer, identified by its well-known or unique
name. Otherwise, show all messages on the bus. Use Ctrl-C to
terminate dump.</para></listitem>
terminate the dump.</para></listitem>
</varlistentry>
<varlistentry>
@ -344,7 +344,7 @@
<varlistentry>
<term><command>set-property</command> <arg choice="plain"><replaceable>SERVICE</replaceable></arg> <arg choice="plain"><replaceable>OBJECT</replaceable></arg> <arg choice="plain"><replaceable>INTERFACE</replaceable></arg> <arg choice="plain"><replaceable>PROPERTY</replaceable></arg> <arg choice="plain"><replaceable>SIGNATURE</replaceable></arg> <arg choice="plain" rep="repeat"><replaceable>ARGUMENT</replaceable></arg></term>
<listitem><para>Set the current value an object
<listitem><para>Set the current value of an object
property. Takes a service name, object path, interface name,
property name, property signature, followed by a list of
parameters formatted as strings.</para></listitem>
@ -370,9 +370,9 @@
types, each parameter following the signature should simply be the
parameter's value formatted as string. Positive boolean values may
be formatted as <literal>true</literal>, <literal>yes</literal>,
<literal>on</literal>, <literal>1</literal>; negative boolean
<literal>on</literal>, or <literal>1</literal>; negative boolean
values may be specified as <literal>false</literal>,
<literal>no</literal>, <literal>off</literal>,
<literal>no</literal>, <literal>off</literal>, or
<literal>0</literal>. For arrays, a numeric argument for the
number of entries followed by the entries shall be specified. For
variants, the signature of the contents shall be specified,
@ -456,7 +456,7 @@ ARRAY "s" {
of the <literal>org.freedesktop.systemd1</literal>
service, and passes it two strings
<literal>cups.service</literal> and
<literal>replace</literal>. As result of the method
<literal>replace</literal>. As a result of the method
call, a single object path parameter is received and
shown:</para>

2
man/coredump.conf.xml
View File

@ -98,7 +98,7 @@
<term><varname>Compress=</varname></term>
<listitem><para>Controls compression for external
storage. Takes a boolean argument, defaults to
storage. Takes a boolean argument, which defaults to
<literal>yes</literal>.</para>
</listitem>
</varlistentry>

4
man/crypttab.xml
View File

@ -160,10 +160,10 @@
at the beginning. This is different from the <option>--offset</option>
option with respect to the sector numbers used in initialization vector
(IV) calculation. Using <option>--offset</option> will shift the IV
calculation by the same negative amount. Hence, if <option>--offset n</option>,
calculation by the same negative amount. Hence, if <option>--offset n</option> is given,
sector n will get a sector number of 0 for the IV calculation.
Using <option>--skip</option> causes sector n to also be the first
sector of the mapped device, but with its number for IV generation is n.</para>
sector of the mapped device, but with its number for IV generation being n.</para>
<para>This option is only relevant for plain devices.</para>
</listitem>

2
man/custom-html.xsl
View File

@ -125,7 +125,7 @@
<!--
- helper template to do conflict resolution between various headings with the same inferred ID attribute/tag from the headerlink template
- this conflict resolution is necessary to prevent malformed HTML output (multiple id attributes with the same value)
- this conflict resolution is necessary to prevent malformed HTML output (multiple ID attributes with the same value)
- and it fixes xsltproc warnings during compilation of HTML man pages
-
- A simple top-to-bottom numbering scheme is implemented for nodes with the same ID value to derive unique ID values for HTML output.

12
man/file-hierarchy.xml
View File

@ -245,7 +245,7 @@
<varlistentry>
<term><filename>/usr/lib/<replaceable>arch-id</replaceable></filename></term>
<listitem><para>Location for placing dynamic libraries, also
<listitem><para>Location for placing dynamic libraries into, also
called <varname>$libdir</varname>. The architecture identifier
to use is defined on <ulink
url="https://wiki.debian.org/Multiarch/Tuples">Multiarch
@ -405,7 +405,7 @@
when the user logs out. Usually, it is a better idea to use
memory mapped files in <filename>/run</filename> (for system
programs) or <varname>$XDG_RUNTIME_DIR</varname> (for user
programs) instead of POSIX shared memory segments, since those
programs) instead of POSIX shared memory segments, since these
directories are not world-writable and hence not vulnerable to
security-sensitive name clashes.</para></listitem>
</varlistentry>
@ -513,7 +513,7 @@
directory should have no effect on operation of programs,
except for increased runtimes necessary to rebuild these
caches. If an application finds
<varname>$XDG_CACHE_HOME</varname> set, is should use the
<varname>$XDG_CACHE_HOME</varname> set, it should use the
directory specified in it instead of this
directory.</para></listitem>
</varlistentry>
@ -525,7 +525,7 @@
new user is created, this directory will be empty or not exist
at all. Applications should fall back to defaults should their
configuration or state in this directory be missing. If an
application finds <varname>$XDG_CONFIG_HOME</varname> set, is
application finds <varname>$XDG_CONFIG_HOME</varname> set, it
should use the directory specified in it instead of this
directory.</para></listitem>
</varlistentry>
@ -568,7 +568,7 @@
such as fonts or artwork. Usually, the precise location and
format of files stored below this directory is subject to
specifications that ensure interoperability. If an application
finds <varname>$XDG_DATA_HOME</varname> set, is should use the
finds <varname>$XDG_DATA_HOME</varname> set, it should use the
directory specified in it instead of this
directory.</para></listitem>
</varlistentry>
@ -618,7 +618,7 @@
<para>It is strongly recommended that <filename>/dev</filename> is
the only location below which device nodes shall be placed.
Similar, <filename>/run</filename> shall be the only location to
Similarly, <filename>/run</filename> shall be the only location to
place sockets and FIFOs. Regular files, directories and symlinks
may be used in all directories.</para>
</refsect1>

4
man/hwdb.xml
View File

@ -34,7 +34,7 @@
<refsect1><title>Description</title>
<para>The hardware database is a key-value store for associating modalias-like keys to
udev-properties-like values. It is used primarily by udev to add the relevant properties
udev-property-like values. It is used primarily by udev to add the relevant properties
to matching devices, but it can also be queried directly.</para>
</refsect1>
@ -57,7 +57,7 @@
associated key-value pairs. Every record in the hwdb starts with one or
more match strings, specifying a shell glob to compare the database
lookup string against. Multiple match lines are specified in additional
consecutive lines. Every match line is compared individually, they are
consecutive lines. Every match line is compared individually, and they are
combined by OR. Every match line must start at the first character of
the line.</para>

14
man/journalctl.xml
View File

@ -82,7 +82,7 @@
matches apply to the same field, then they are automatically
matched as alternatives, i.e. the resulting output will show
entries matching any of the specified matches for the same
field. Finally, the character <literal>+</literal> may appears
field. Finally, the character <literal>+</literal> may appear
as a separate word between other terms on the command line. This
causes all matches before and after to be combined in a
disjunction (i.e. logical OR).</para>
@ -656,18 +656,18 @@
<listitem><para>Removes archived journal files until the disk
space they use falls below the specified size (specified with
the usual <literal>K</literal>, <literal>M</literal>,
<literal>G</literal>, <literal>T</literal> suffixes), or all
<literal>G</literal> and <literal>T</literal> suffixes), or all
journal files contain no data older than the specified
timespan (specified with the usual <literal>s</literal>,
<literal>min</literal>, <literal>h</literal>,
<literal>days</literal>, <literal>months</literal>,
<literal>weeks</literal>, <literal>years</literal> suffixes),
<literal>weeks</literal> and <literal>years</literal> suffixes),
or no more than the specified number of separate journal files
remain. Note that running <option>--vacuum-size=</option> has
only indirect effect on the output shown by
only an indirect effect on the output shown by
<option>--disk-usage</option>, as the latter includes active
journal files, while the vacuuming operation only operates
on archived journal files. Similar,
on archived journal files. Similarly,
<option>--vacuum-files=</option> might not actually reduce the
number of journal files to below the specified number, as it
will not remove active journal
@ -772,7 +772,7 @@
<varlistentry>
<term><option>--flush</option></term>
<listitem><para>Asks the Journal daemon to flush any log data
<listitem><para>Asks the journal daemon to flush any log data
stored in <filename>/run/log/journal</filename> into
<filename>/var/log/journal</filename>, if persistent storage is
enabled. This call does not return until the operation is
@ -782,7 +782,7 @@
<varlistentry>
<term><option>--rotate</option></term>
<listitem><para>Asks the Journal daemon to rotate journal files.
<listitem><para>Asks the journal daemon to rotate journal files.
</para></listitem>
</varlistentry>
<xi:include href="standard-options.xml" xpointer="help" />

14
man/journald.conf.xml
View File

@ -203,7 +203,7 @@
<para><varname>SystemMaxUse=</varname> and
<varname>RuntimeMaxUse=</varname> control how much disk space
the journal may use up at maximum.
the journal may use up at most.
<varname>SystemKeepFree=</varname> and
<varname>RuntimeKeepFree=</varname> control how much disk
space systemd-journald shall leave free for other uses.
@ -220,12 +220,12 @@
enough free space before and journal files were created, and
subsequently something else causes the file system to fill up,
journald will stop using more space, but it will not be
removing existing files to reduce footprint again
removing existing files to reduce the footprint again,
either.</para>
<para><varname>SystemMaxFileSize=</varname> and
<varname>RuntimeMaxFileSize=</varname> control how large
individual journal files may grow at maximum. This influences
individual journal files may grow at most. This influences
the granularity in which disk space is made available through
rotation, i.e. deletion of historic data. Defaults to one
eighth of the values configured with
@ -241,7 +241,7 @@
<para><varname>SystemMaxFiles=</varname> and
<varname>RuntimeMaxFiles=</varname> control how many
individual journal files to keep at maximum. Note that only
individual journal files to keep at most. Note that only
archived files are deleted to reduce the number of files until
this limit is reached; active files will stay around. This
means that, in effect, there might still be more journal files
@ -375,15 +375,15 @@
<para>
Journal events can be transferred to a different logging daemon
in two different ways. In the first method, messages are
in two different ways. With the first method, messages are
immediately forwarded to a socket
(<filename>/run/systemd/journal/syslog</filename>), where the
traditional syslog daemon can read them. This method is
controlled by <varname>ForwardToSyslog=</varname> option. In a
controlled by the <varname>ForwardToSyslog=</varname> option. With a
second method, a syslog daemon behaves like a normal journal
client, and reads messages from the journal files, similarly to
<citerefentry><refentrytitle>journalctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>.
In this method, messages do not have to be read immediately,
With this, messages do not have to be read immediately,
which allows a logging daemon which is only started late in boot
to access all messages since the start of the system. In
addition, full structured meta-data is available to it. This

2
man/libudev.xml
View File

@ -75,7 +75,7 @@
a udev context. Furthermore, multiple different udev contexts can
be used in parallel by multiple threads. However, a single context
must not be accessed by multiple threads in parallel. The caller
is responsible of providing suitable locking if they intend to use
is responsible for providing suitable locking if they intend to use
it from multiple threads.</para>
<para>To introspect a local device on a system, a udev device

4
man/logind.conf.xml
View File

@ -255,8 +255,8 @@
<listitem><para>Specifies the timeout after system startup or
system resume in which systemd will hold off on reacting to
LID events. This is required for the system to properly
detect any hotplugged devices so systemd can ignore LID events
lid events. This is required for the system to properly
detect any hotplugged devices so systemd can ignore lid events
if external monitors, or docks, are connected. If set to 0,
systemd will always react immediately, possibly before the
kernel fully probed all hotplugged devices. This is safe, as

30
man/machinectl.xml
View File

@ -245,7 +245,7 @@
<literal>checksum</literal> and <literal>signature</literal>.
If <literal>no</literal>, no verification is done. If
<literal>checksum</literal> is specified, the download is
checked for integrity after transfer is complete, but no
checked for integrity after the transfer is complete, but no
signatures are verified. If <literal>signature</literal> is
specified, the checksum is verified and the images's signature
is checked against a local keyring of trustable vendors. It is
@ -423,7 +423,7 @@
<para>When using the <command>shell</command> command without
arguments, (thus invoking the executed shell or command on the
local host), it is similar in many ways to a <citerefentry
local host), it is in many ways similar to a <citerefentry
project='die-net'><refentrytitle>su</refentrytitle><manvolnum>1</manvolnum></citerefentry>
session, but, unlike <command>su</command>, completely isolates
the new session from the originating session, so that it
@ -433,7 +433,7 @@
environment variables or resource limits, among other
properties.</para>
<para>Note that the
<para>Note that
<citerefentry><refentrytitle>systemd-run</refentrytitle><manvolnum>1</manvolnum></citerefentry>
may be used in place of the <command>shell</command> command,
and allows more detailed, low-level configuration of the
@ -633,7 +633,7 @@
<varlistentry>
<term><command>set-limit</command> [<replaceable>NAME</replaceable>] <replaceable>BYTES</replaceable></term>
<listitem><para>Sets the maximum size in bytes a specific
<listitem><para>Sets the maximum size in bytes that a specific
container or VM image, or all images, may grow up to on disk
(disk quota). Takes either one or two parameters. The first,
optional parameter refers to a container or VM image name. If
@ -646,7 +646,7 @@
<para>Note that per-container size limits are only supported
on btrfs file systems. Also note that, if
<command>set-limit</command> is invoked without image
<command>set-limit</command> is invoked without an image
parameter, and <filename>/var/lib/machines</filename> is
empty, and the directory is not located on btrfs, a btrfs
loopback file is implicitly created as
@ -656,7 +656,7 @@
loopback may later be readjusted with
<command>set-limit</command>, as well. If such a
loopback-mounted <filename>/var/lib/machines</filename>
directory is used, <command>set-limit</command> without image
directory is used, <command>set-limit</command> without an image
name alters both the quota setting within the file system as
well as the loopback file and file system size
itself.</para></listitem>
@ -802,7 +802,7 @@
and places it under the specified name in
<filename>/var/lib/machines/</filename>. When
<command>import-tar</command> is used, the file specified as
first argument should be a tar archive, possibly compressed
the first argument should be a tar archive, possibly compressed
with xz, gzip or bzip2. It will then be unpacked into its own
subvolume in <filename>/var/lib/machines</filename>. When
<command>import-raw</command> is used, the file should be a
@ -883,17 +883,17 @@
semantics. Specifically, they must consist of one or more
non-empty label strings, separated by dots. No leading or trailing
dots are allowed. No sequences of multiple dots are allowed. The
label strings may only consists of alphanumeric characters as well
label strings may only consist of alphanumeric characters as well
as the dash and underscore. The maximum length of a machine name
is 64 characters.</para>
<para>A special machine with the name <literal>.host</literal>
refers to the running host system itself. This is useful for execution
operations or inspecting the host system as well. Not that
operations or inspecting the host system as well. Note that
<command>machinectl list</command> will not show this special
machine unless the <option>--all</option> switch is specified.</para>
<para>Requirements on image names are less strict, however must be
<para>Requirements on image names are less strict, however, they must be
valid UTF-8, must be suitable as file names (hence not be the
single or double dot, and not include a slash), and may not
contain control characters. Since many operations search for an
@ -901,7 +901,7 @@
images in the same strict fashion as machines.</para>
<para>A special image with the name <literal>.host</literal>
refers to the image of the running host system. It is hence
refers to the image of the running host system. It hence
conceptually maps to the special <literal>.host</literal> machine
name described above. Note that <command>machinectl
list-images</command> won't show this special image either, unless
@ -943,7 +943,7 @@
<listitem><para>A simple directory tree, containing the files
and directories of the container to boot.</para></listitem>
<listitem><para>A subvolume (on btrfs file systems), which are
<listitem><para>Subvolumes (on btrfs file systems), which are
similar to the simple directories, described above. However,
they have additional benefits, such as efficient cloning and
quota reporting.</para></listitem>
@ -956,7 +956,7 @@
<para>See
<citerefentry><refentrytitle>systemd-nspawn</refentrytitle><manvolnum>1</manvolnum></citerefentry>
for more information on image formats, in particular it's
for more information on image formats, in particular its
<option>--directory=</option> and <option>--image=</option>
options.</para>
</refsect1>
@ -1010,8 +1010,8 @@
<programlisting># machinectl export-tar fedora myfedora.tar.xz</programlisting>
<para>Exports the container <literal>fedora</literal> in an
xz-compress tar file <filename>myfedora.tar.xz</filename> in the
<para>Exports the container <literal>fedora</literal> as an
xz-compressed tar file <filename>myfedora.tar.xz</filename> into the
current directory.</para>
</example>

2
man/networkctl.xml
View File

@ -129,7 +129,7 @@ IDX LINK TYPE OPERATIONAL SETUP
configured DNS servers, etc.</para>
<para>When no links are specified, routable links are
shown. See also option <option>--all</option>.</para>
shown. Also see the option <option>--all</option>.</para>
<para>Produces output similar to
<programlisting>

2
man/nss-myhostname.xml
View File

@ -100,7 +100,7 @@
<para>It is recommended to place <literal>myhostname</literal>
last in the <filename>nsswitch.conf</filename> line to make sure
that this mapping is only used as fallback, and any DNS or
that this mapping is only used as fallback, and that any DNS or
<filename>/etc/hosts</filename> based mapping takes
precedence.</para>
</refsect1>

2
man/nss-mymachines.xml
View File

@ -76,7 +76,7 @@
<para>It is recommended to place <literal>mymachines</literal>
near the end of the <filename>nsswitch.conf</filename> lines to
make sure that its mappings are only used as fallback, and any
make sure that its mappings are only used as fallback, and that any
other mappings, such as DNS or <filename>/etc/hosts</filename>
based mappings, take precedence.</para>
</refsect1>

6
man/resolved.conf.xml
View File

@ -59,7 +59,7 @@
<title>Description</title>
<para>These configuration files control local DNS and LLMNR
name resolving.</para>
name resolution.</para>
</refsect1>
@ -104,8 +104,8 @@
Resolution support (<ulink
url="https://tools.ietf.org/html/rfc4795">RFC 4794</ulink>) on
the local host. If true, enables full LLMNR responder and
resolver support. If false, disable both. If set to
<literal>resolve</literal>, only resolving support is enabled,
resolver support. If false, disables both. If set to
<literal>resolve</literal>, only resolution support is enabled,
but responding is disabled. Note that
<citerefentry><refentrytitle>systemd-networkd.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>
also maintains per-interface LLMNR settings. LLMNR will be

2
man/sd-bus-errors.xml
View File

@ -224,7 +224,7 @@
</varlistentry>
<varlistentry>
<term><varname>SD_BUS_ERROR_FILE_EXISTS</varname></term>
<listitem><para>The requested file exists already.</para></listitem>
<listitem><para>The requested file already exists.</para></listitem>
</varlistentry>
<varlistentry>
<term><varname>SD_BUS_ERROR_UNKNOWN_METHOD</varname></term>

28
man/sd_bus_creds_get_pid.xml
View File

@ -317,7 +317,7 @@
to determine the mask of fields available.</para>
<para><function>sd_bus_creds_get_pid()</function> will retrieve
the PID (process identifier). Similar,
the PID (process identifier). Similarly,
<function>sd_bus_creds_get_ppid()</function> will retrieve the
parent PID. Note that PID 1 has no parent process, in which case
-ENXIO is returned.</para>
@ -326,14 +326,14 @@
TID (thread identifier).</para>
<para><function>sd_bus_creds_get_uid()</function> will retrieve
the numeric UID (user identifier). Similar,
the numeric UID (user identifier). Similarly,
<function>sd_bus_creds_get_euid()</function> returns the effective
UID, <function>sd_bus_creds_get_suid()</function> the saved UID
and <function>sd_bus_creds_get_fsuid()</function> the file system
UID.</para>
<para><function>sd_bus_creds_get_gid()</function> will retrieve the
numeric GID (group identifier). Similar,
numeric GID (group identifier). Similarly,
<function>sd_bus_creds_get_egid()</function> returns the effective
GID, <function>sd_bus_creds_get_sgid()</function> the saved GID
and <function>sd_bus_creds_get_fsgid()</function> the file system
@ -355,7 +355,7 @@
<para><function>sd_bus_creds_get_exe()</function> will retrieve
the path to the program executable (as stored in the
<filename>/proc/<replaceable>pid</replaceable>/exe</filename>
link, but with <literal> (deleted)</literal> suffix removed). Note
link, but with the <literal> (deleted)</literal> suffix removed). Note
that kernel threads do not have an executable path, in which case
-ENXIO is returned.</para>
@ -372,36 +372,36 @@
<para><function>sd_bus_creds_get_unit()</function> will retrieve
the systemd unit name (in the system instance of systemd) that the
process is part of. See
process is a part of. See
<citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>. For
processes that are not part of a unit, returns -ENXIO.
</para>
<para><function>sd_bus_creds_get_user_unit()</function> will
retrieve the systemd unit name (in the user instance of systemd)
that the process is part of. See
that the process is a part of. See
<citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>. For
processes that are not part of a user unit, returns -ENXIO.
</para>
<para><function>sd_bus_creds_get_slice()</function> will retrieve
the systemd slice (a unit in the system instance of systemd) that
the process is part of. See
<citerefentry><refentrytitle>systemd.slice</refentrytitle><manvolnum>5</manvolnum></citerefentry>. Similar,
the process is a part of. See
<citerefentry><refentrytitle>systemd.slice</refentrytitle><manvolnum>5</manvolnum></citerefentry>. Similarly,
<function>sd_bus_creds_get_user_slice()</function> retrieves the
systemd slice of the process, in the user instance of systemd.
</para>
<para><function>sd_bus_creds_get_session()</function> will
retrieve the identifier of the login session that the process is
part of. See
a part of. See
<citerefentry><refentrytitle>systemd-logind.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>. For
processes that are not part of a session, returns -ENXIO.
</para>
<para><function>sd_bus_creds_get_owner_uid()</function> will
retrieve the numeric UID (user identifier) of the user who owns
the login session that the process is part of. See
the login session that the process is a part of. See
<citerefentry><refentrytitle>systemd-logind.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>.
For processes that are not part of a session, returns -ENXIO.
</para>
@ -494,7 +494,7 @@
<varlistentry>
<term><constant>-ENODATA</constant></term>
<listitem><para>Given field is not available in the
<listitem><para>The given field is not available in the
credentials object <parameter>c</parameter>.</para>
</listitem>
</varlistentry>
@ -502,7 +502,7 @@
<varlistentry>
<term><constant>-ENXIO</constant></term>
<listitem><para>Given field is not specified for the described
<listitem><para>The given field is not specified for the described
process or peer. This will be returned by
<function>sd_bus_get_unit()</function>,
<function>sd_bus_get_slice()</function>,
@ -514,8 +514,8 @@
slice, or logind session. It will also be returned by
<function>sd_bus_creds_get_exe()</function> and
<function>sd_bus_creds_get_cmdline()</function> for kernel
threads (since these aren't started from an executable binary
or have a command line),
threads (since these are not started from an executable binary,
nor have a command line), and by
<function>sd_bus_creds_get_audit_session_id()</function> and
<function>sd_bus_creds_get_audit_login_uid()</function> when
the process is not part of an audit session, and

12
man/sd_bus_creds_new_from_pid.xml
View File

@ -130,7 +130,7 @@
<para><function>sd_bus_creds_new_from_pid()</function> creates a
new credentials object and fills it with information about the
process <parameter>pid</parameter>. The pointer to this object
will be stored in <parameter>ret</parameter> pointer. Note that
will be stored in the <parameter>ret</parameter> pointer. Note that
credential objects may also be created and retrieved via
<citerefentry><refentrytitle>sd_bus_get_name_creds</refentrytitle><manvolnum>3</manvolnum></citerefentry>,
<citerefentry><refentrytitle>sd_bus_get_owner_creds</refentrytitle><manvolnum>3</manvolnum></citerefentry>
@ -171,11 +171,11 @@
<constant>SD_BUS_CREDS_AUDIT_LOGIN_UID</constant>,
<constant>SD_BUS_CREDS_TTY</constant>,
<constant>SD_BUS_CREDS_UNIQUE_NAME</constant>,
<constant>SD_BUS_CREDS_WELL_KNOWN_NAMES</constant>,
<constant>SD_BUS_CREDS_WELL_KNOWN_NAMES</constant>, and
<constant>SD_BUS_CREDS_DESCRIPTION</constant>. Use the special
value <constant>_SD_BUS_CREDS_ALL</constant> to request all
supported fields. The <constant>SD_BUS_CREDS_AUGMENT</constant>
may not be ORed into the mask for invocations of
constant may not be ORed into the mask for invocations of
<function>sd_bus_creds_new_from_pid()</function>.</para>
<para>Fields can be retrieved from the credentials object using
@ -204,14 +204,14 @@
for the credential fields that could not be determined atomically
at peer connection time, and which were later added by reading
augmenting credential data from
<filename>/proc</filename>. Similar, for credential objects
<filename>/proc</filename>. Similarly, for credential objects
retrieved via <function>sd_bus_get_owner_creds()</function>, the
mask is set for the fields that could not be determined atomically
at bus creation time, but have been augmented. Similar, for
at bus creation time, but have been augmented. Similarly, for
credential objects retrieved via
<function>sd_bus_message_get_creds()</function>, the mask is set
for the fields that could not be determined atomically at message
send time, but have been augmented. The mask returned by
sending time, but have been augmented. The mask returned by
<function>sd_bus_creds_get_augmented_mask()</function> is always a
subset of (or identical to) the mask returned by
<function>sd_bus_creds_get_mask()</function> for the same

8
man/sd_bus_default.xml
View File

@ -120,8 +120,8 @@
call), the connection is terminated. Note that the connection is
not automatically terminated when the associated thread ends. It
is important to drop the last reference to the bus connection
explicitly before the thread ends, or otherwise, the connection will
be leaked. Also, queued but unread or unwritten messages keep the
explicitly before the thread ends, as otherwise, the connection will
leak. Also, queued but unread or unwritten messages keep the
bus referenced, see below.</para>
<para><function>sd_bus_default_user()</function> returns a user
@ -139,14 +139,14 @@
<function>sd_bus_open_system()</function> does the same, but
connects to the system bus. In contrast to
<function>sd_bus_default()</function>,
<function>sd_bus_default_user()</function>,
<function>sd_bus_default_user()</function>, and
<function>sd_bus_default_system()</function>, these calls return
new, independent connection objects that are not associated with
the invoking thread and are not shared between multiple
invocations. It is recommended to share connections per thread to
efficiently make use the available resources. Thus, it is
recommended to use <function>sd_bus_default()</function>,
<function>sd_bus_default_user()</function>,
<function>sd_bus_default_user()</function> and
<function>sd_bus_default_system()</function> to connect to the
user or system buses.</para>

8
man/sd_bus_error.xml
View File

@ -200,7 +200,7 @@
call can fail if no memory may be allocated for the name and
message strings, in which case an
<constant>SD_BUS_ERROR_NO_MEMORY</constant> error might be set
instead and -ENOMEM returned. Do not use this call on error
instead and -ENOMEM be returned. Do not use this call on error
structures that are already initialized. If you intend to reuse an
error structure, free the old data stored in it with
<function>sd_bus_error_free()</function> first.</para>
@ -238,7 +238,7 @@
convenient usage in <function>return</function> statements. This
call might fail due to lack of memory, in which case an
<constant>SD_BUS_ERROR_NO_MEMORY</constant> error is set instead,
and -ENOMEM returned.</para>
and -ENOMEM is returned.</para>
<para><function>sd_bus_error_set_errnof()</function> is similar to
<function>sd_bus_error_set_errno()</function>, but in addition to
@ -295,10 +295,10 @@
<title>Return Value</title>
<para>The functions <function>sd_bus_error_set()</function>,
<function>sd_bus_error_setf()</function>,
<function>sd_bus_error_setf()</function>, and
<function>sd_bus_error_set_const()</function>, when successful,
return the negative errno value corresponding to the
<parameter>name</parameter> parameter. Functions
<parameter>name</parameter> parameter. The functions
<function>sd_bus_error_set_errno()</function>,
<function>sd_bus_error_set_errnof()</function> and
<function>sd_bus_error_set_errnofv()</function>, when successful,

2
man/sd_bus_error_add_map.xml
View File

@ -95,7 +95,7 @@
<para>The function takes a pointer to an array of
<structname>sd_bus_error_map</structname> structures. A reference
to the specified array is added to the lookup tables for error
mappings. Note that the structure is not copied, it is hence
mappings. Note that the structure is not copied, and that it is hence
essential that the array stays available and constant during the
entire remaining runtime of the process.</para>

4
man/sd_bus_message_append_array.xml
View File

@ -132,7 +132,7 @@
the offset is specified as zero and the size specified as
UINT64_MAX the full memory file descriptor contents is used. The
memory file descriptor is sealed by this call if it hasn't been
sealed yet, and cannot be modified a after this call. See
sealed yet, and cannot be modified after this call. See
<citerefentry
project='man-pages'><refentrytitle>memfd_create</refentrytitle><manvolnum>2</manvolnum></citerefentry>
for details about memory file descriptors. Appending arrays with
@ -171,7 +171,7 @@
copying items to the message, it returns a pointer to the
destination area to the caller in pointer
<parameter>p</parameter>. The caller should subsequently write the
array contents to this memory. Modifications of the memory
array contents to this memory. Modifications to the memory
pointed to should only occur until the next operation on the bus
message is invoked. Most importantly, the memory should not be
altered anymore when another field has been added to the message

2
man/sd_bus_message_get_monotonic_usec.xml
View File

@ -83,7 +83,7 @@
<citerefentry><refentrytitle>clock_gettime</refentrytitle><manvolnum>2</manvolnum></citerefentry>
for details.</para>
<para>Similar,
<para>Similarly,
<function>sd_bus_message_get_realtime_usec()</function> returns
the realtime (wallclock) timestamp of the time the message was
sent. This value is in microseconds since Jan 1st, 1970, i.e. in

4
man/sd_bus_negotiate_fds.xml
View File

@ -118,7 +118,7 @@
<para><function>sd_bus_negotiate_creds()</function> controls
whether and which implicit sender credentials shall be attached
automatically to all incoming messages. Takes a bus object, a
automatically to all incoming messages. Takes a bus object and a
boolean indicating whether to enable or disable the credential
parts encoded in the bit mask value argument. Note that not all
transports support attaching sender credentials to messages, or do
@ -143,7 +143,7 @@
after a connection has been set up. Note that, when operating on a
connection that is shared between multiple components of the same
program (for example via
<citerefentry><refentrytitle>sd_bus_default</refentrytitle><manvolnum>3</manvolnum></citerefentry>)
<citerefentry><refentrytitle>sd_bus_default</refentrytitle><manvolnum>3</manvolnum></citerefentry>),
it is highly recommended to only enable additional per message
metadata fields, but never disable them again, in order not to
disable functionality needed by other components.</para>

2
man/sd_bus_path_encode.xml
View File

@ -144,7 +144,7 @@
(<literal>char **</literal>) via varargs. The decoded label
will be stored there. Each <literal>%</literal> character will
only match the current label. It will never match across labels.
Furthermore, only a single such directive is allowed per label.
Furthermore, only a single directive is allowed per label.
If <literal>NULL</literal> is passed as output storage, the
label is verified but not returned to the caller.</para>
</refsect1>

2
man/sd_event_add_child.xml
View File

@ -157,7 +157,7 @@
<varlistentry>
<term><constant>-EBUSY</constant></term>
<listitem><para>An handler is already installed for this
<listitem><para>A handler is already installed for this
child.</para></listitem>
</varlistentry>

2
man/sd_event_add_defer.xml
View File

@ -90,7 +90,7 @@
<refsect1>
<title>Description</title>
<para>Those three functions add new event sources to an event loop
<para>These three functions add new event sources to an event loop
object. The event loop is specified in
<parameter>event</parameter>, the event source is returned in the
<parameter>source</parameter> parameter. The event sources are

4
man/sd_event_add_signal.xml
View File

@ -82,7 +82,7 @@
<para><function>sd_event_add_signal()</function> adds a new signal
event source to an event loop object. The event loop is specified
in <parameter>event</parameter>, the event source is returned in
in <parameter>event</parameter>, and the event source is returned in
the <parameter>source</parameter> parameter. The
<parameter>signal</parameter> parameter specifies the signal to be handled
(see
@ -149,7 +149,7 @@
<varlistentry>
<term><constant>-EBUSY</constant></term>
<listitem><para>An handler is already installed for this
<listitem><para>A handler is already installed for this
signal or the signal was not blocked previously.</para></listitem>
</varlistentry>

8
man/sd_event_run.xml
View File

@ -46,7 +46,7 @@
<refname>sd_event_run</refname>
<refname>sd_event_loop</refname>
<refpurpose>Run libsystemd event loop</refpurpose>
<refpurpose>Run the libsystemd event loop</refpurpose>
</refnamediv>
<refsynopsisdiv>
@ -72,7 +72,7 @@
<para><function>sd_event_run()</function> can be used to run one
iteration of the event loop of libsystemd. This function waits
until an event to process is available, and dispatches a handler
for it. Parameter <parameter>timeout</parameter> specifices the
for it. The <parameter>timeout</parameter> parameter specifices the
maximum time (in microseconds) to wait. <constant>(uint64_t)
-1</constant> may be used to specify an infinite timeout.</para>
@ -121,7 +121,7 @@
<varlistentry>
<term><constant>-EINVAL</constant></term>
<listitem><para>Parameter <parameter>event</parameter> is
<listitem><para>The <parameter>event</parameter> parameter is
<constant>NULL</constant>.</para></listitem>
</varlistentry>
@ -176,7 +176,7 @@
<citerefentry><refentrytitle>sd_event_add_defer</refentrytitle><manvolnum>3</manvolnum></citerefentry>,
<citerefentry><refentrytitle>sd_event_add_exit</refentrytitle><manvolnum>3</manvolnum></citerefentry>,
<citerefentry><refentrytitle>sd_event_add_post</refentrytitle><manvolnum>3</manvolnum></citerefentry>,
<ulink url="https://developer.gnome.org/glib/unstable/glib-The-Main-Event-Loop.html">GLIb Main Event Loop</ulink>.
<ulink url="https://developer.gnome.org/glib/unstable/glib-The-Main-Event-Loop.html">GLib Main Event Loop</ulink>.
</para>
</refsect1>

4
man/sd_event_set_name.xml
View File

@ -77,7 +77,7 @@
<parameter>source</parameter>. This name will be used in error
messages generated by
<citerefentry><refentrytitle>sd-event</refentrytitle><manvolnum>3</manvolnum></citerefentry>
for this source. Specified <parameter>name</parameter> must point
for this source. The <parameter>name</parameter> must point
to a <constant>NUL</constant>-terminated string or be
<constant>NULL</constant>. In the latter case, the name will be
unset. The string is copied internally, so the
@ -128,7 +128,7 @@
<refsect1>
<title>Notes</title>
<para>Functions described here are available as a
<para>The functions described here are available as a
shared library, which can be compiled and linked to with the
<constant>libsystemd</constant> <citerefentry
project='die-net'><refentrytitle>pkg-config</refentrytitle><manvolnum>1</manvolnum></citerefentry>

8
man/sd_event_wait.xml
View File

@ -47,7 +47,7 @@
<refname>sd_event_prepare</refname>
<refname>sd_event_dispatch</refname>
<refpurpose>Run parts of libsystemd event loop</refpurpose>
<refpurpose>Run parts of the libsystemd event loop</refpurpose>
</refnamediv>
<refsynopsisdiv>
@ -123,8 +123,8 @@
└──────────┘
</programlisting>
<para>All three functions as the first argument take the event
loop object <parameter>event</parameter> that is created with with
<para>All three functions take, as the first argument, the event
loop object <parameter>event</parameter> that is created with
<function>sd_event_new</function>. The timeout for
<function>sd_event_wait</function> is specified with
<parameter>timeout</parameter> in milliseconds.
@ -155,7 +155,7 @@
<varlistentry>
<term><constant>-EINVAL</constant></term>
<listitem><para>Parameter <parameter>event</parameter> is
<listitem><para>The <parameter>event</parameter> parameter is
<constant>NULL</constant>.</para></listitem>
</varlistentry>

2
man/sd_listen_fds.xml
View File

@ -145,7 +145,7 @@
<function>sd_is_socket()</function> and related calls is not
sufficient. Note that the names used are not unique in any
way. The returned array of strings has as many entries as file
descriptors has been received, plus a final NULL pointer
descriptors have been received, plus a final NULL pointer
terminating the array. The caller needs to free the array itself
and each of its elements with libc's <function>free()</function>
call after use. If the <parameter>names</parameter> parameter is

2
man/sd_notify.xml
View File

@ -244,7 +244,7 @@
different names to submitted file descriptors, submit them in
seperate invocations of
<function>sd_pid_notify_with_fds()</function>. The name may
consist of any ASCII characters, but must not contain control
consist of any ASCII character, but must not contain control
characters or <literal>:</literal>. It may not be longer than
255 characters. If a submitted name does not follow these
restrictions, it is ignored.</para></listitem>

6
man/sd_pid_get_session.xml
View File

@ -205,7 +205,7 @@
determine the Unix UID (user identifier) of the owner of the
session of a process identified the specified PID. Note that this
function will succeed for user processes which are shared between
multiple login sessions of the same user, where
multiple login sessions of the same user, whereas
<function>sd_pid_get_session()</function> will fail. For processes
not being part of a login session and not being a shared process
of a user, this function will fail with -ENODATA.</para>
@ -227,7 +227,7 @@
<citerefentry project='man-pages'><refentrytitle>free</refentrytitle><manvolnum>3</manvolnum></citerefentry>
call after use.</para>
<para>Similar, <function>sd_pid_get_user_slice()</function>
<para>Similarly, <function>sd_pid_get_user_slice()</function>
returns the user slice (as managed by the user's systemd instance)
of a process.</para>
@ -294,7 +294,7 @@
<varlistentry>
<term><constant>-ENODATA</constant></term>
<listitem><para>Given field is not specified for the described
<listitem><para>The given field is not specified for the described
process or peer.</para>
</listitem>
</varlistentry>

2
man/sd_seat_get_active.xml
View File

@ -158,7 +158,7 @@
<varlistentry>
<term><constant>-ENODATA</constant></term>
<listitem><para>Given field is not specified for the described
<listitem><para>The given field is not specified for the described
seat.</para>
</listitem>
</varlistentry>

2
man/sd_session_is_active.xml
View File

@ -306,7 +306,7 @@
<varlistentry>
<term><constant>-ENODATA</constant></term>
<listitem><para>Given field is not specified for the described
<listitem><para>The given field is not specified for the described
session.</para>
</listitem>
</varlistentry>

2
man/sd_uid_get_state.xml
View File

@ -179,7 +179,7 @@
<varlistentry>
<term><constant>-ENODATA</constant></term>
<listitem><para>Given field is not specified for the described
<listitem><para>The given field is not specified for the described
user.</para>
</listitem>
</varlistentry>

2
man/standard-conf.xml
View File

@ -38,7 +38,7 @@
<refsection id='main-conf'>
<title>Configuration Directories and Precedence</title>
<para>Default configuration is defined during compilation, so a
<para>The default configuration is defined during compilation, so a
configuration file is only needed when it is necessary to deviate
from those defaults. By default, the configuration file in
<filename>/etc/systemd/</filename> contains commented out entries

8
man/sysctl.d.xml
View File

@ -142,8 +142,8 @@ net.bridge.bridge-nf-call-arptables = 0
<para>This method applies settings when the module is
loaded. Please note that, unless the <filename>br_netfilter</filename>
module is loaded, bridged packets will not be filtered by
netfilter (starting with kernel 3.18), so simply not loading the
module is suffient to avoid filtering.</para>
Netfilter (starting with kernel 3.18), so simply not loading the
module is sufficient to avoid filtering.</para>
</example>
<example>
@ -163,9 +163,9 @@ net.bridge.bridge-nf-call-arptables = 0
<para>This method forces the module to be always loaded. Please
note that, unless the <filename>br_netfilter</filename> module is
loaded, bridged packets will not be filtered with netfilter
loaded, bridged packets will not be filtered with Netfilter
(starting with kernel 3.18), so simply not loading the module is
suffient to avoid filtering.</para>
sufficient to avoid filtering.</para>
</example>
</refsect1>

22
man/systemctl.xml
View File

@ -103,7 +103,7 @@
<listitem>
<para>The argument should be a comma-separated list of unit
LOAD, SUB, or ACTIVE states. When listing units, show only
those in specified states. Use <option>--state=failed</option>
those in the specified states. Use <option>--state=failed</option>
to show only failed units.</para>
<para>As a special case, if one of the arguments is
@ -518,7 +518,7 @@
<listitem>
<para>When used with
<command>enable</command>/<command>disable</command>/<command>is-enabled</command>
(and related commands), use alternative root path when
(and related commands), use an alternate root path when
looking for unit files.</para>
</listitem>
@ -851,7 +851,7 @@ kobject-uevent 1 systemd-udevd-kernel.socket systemd-udevd.service
<para>Show properties of one or more units, jobs, or the
manager itself. If no argument is specified, properties of
the manager will be shown. If a unit name is specified,
properties of the unit is shown, and if a job id is
properties of the unit is shown, and if a job ID is
specified, properties of the job is shown. By default, empty
properties are suppressed. Use <option>--all</option> to
show those too. To select specific properties to show, use
@ -1158,17 +1158,17 @@ kobject-uevent 1 systemd-udevd-kernel.socket systemd-udevd.service
</row>
<row>
<entry><literal>static</literal></entry>
<entry>Unit file is not enabled, and has no provisions for enabling in the <literal>[Install]</literal> section.</entry>
<entry>The unit file is not enabled, and has no provisions for enabling in the <literal>[Install]</literal> section.</entry>
<entry>0</entry>
</row>
<row>
<entry><literal>indirect</literal></entry>
<entry>Unit file itself is not enabled, but it has a non-empty <varname>Also=</varname> setting in the <literal>[Install]</literal> section, listing other unit files that might be enabled.</entry>
<entry>The unit file itself is not enabled, but it has a non-empty <varname>Also=</varname> setting in the <literal>[Install]</literal> section, listing other unit files that might be enabled.</entry>
<entry>0</entry>
</row>
<row>
<entry><literal>disabled</literal></entry>
<entry>Unit file is not enabled.</entry>
<entry>The unit file is not enabled.</entry>
<entry>&gt; 0</entry>
</row>
</tbody>
@ -1227,12 +1227,12 @@ kobject-uevent 1 systemd-udevd-kernel.socket systemd-udevd.service
<listitem>
<para>Adds <literal>Wants=</literal> or <literal>Requires=</literal>
dependency, respectively, to the specified
dependencies, respectively, to the specified
<replaceable>TARGET</replaceable> for one or more units. </para>
<para>This command honors <option>--system</option>,
<option>--user</option>, <option>--runtime</option> and
<option>--global</option> in a similar way as
<option>--global</option> in a way similar to
<command>enable</command>.</para>
</listitem>
@ -1248,7 +1248,7 @@ kobject-uevent 1 systemd-udevd-kernel.socket systemd-udevd.service
<para>Depending on whether <option>--system</option> (the default),
<option>--user</option>, or <option>--global</option> is specified,
this creates a drop-in file for each unit either for the system,
this command creates a drop-in file for each unit either for the system,
for the calling user, or for all futures logins of all users. Then,
the editor (see the "Environment" section below) is invoked on
temporary files which will be written to the real location if the
@ -1442,7 +1442,7 @@ kobject-uevent 1 systemd-udevd-kernel.socket systemd-udevd.service
<term><command>daemon-reload</command></term>
<listitem>
<para>Reload systemd manager configuration. This will
<para>Reload the systemd manager configuration. This will
rerun all generators (see
<citerefentry><refentrytitle>systemd.generator</refentrytitle><manvolnum>7</manvolnum></citerefentry>),
reload all unit files, and recreate the entire dependency
@ -1485,7 +1485,7 @@ kobject-uevent 1 systemd-udevd-kernel.socket systemd-udevd.service
maintenance mode, and with no failed services. Failure is
returned otherwise (exit code non-zero). In addition, the
current state is printed in a short string to standard
output, see table below. Use <option>--quiet</option> to
output, see the table below. Use <option>--quiet</option> to
suppress this output.</para>
<table>

4
man/systemd-ask-password.xml
View File

@ -139,7 +139,7 @@
any collected passwords into the kernel keyring of the root
user, as a key of the specified name. If combined with
<option>--accept-cached</option>, it will also try to retrieve
the such cached passwords from the key in the kernel keyring
such cached passwords from the key in the kernel keyring
instead of querying the user right away. By using this option,
the kernel keyring may be used as effective cache to avoid
repeatedly asking users for passwords, if there are multiple
@ -181,7 +181,7 @@
<term><option>--accept-cached</option></term>
<listitem><para>If passed, accept cached passwords, i.e.
passwords previously typed in. </para></listitem>
passwords previously entered.</para></listitem>
</varlistentry>
<varlistentry>

4
man/systemd-backlight@.service.xml
View File

@ -58,8 +58,8 @@
that restores the display backlight brightness at early boot and
saves it at shutdown. On disk, the backlight brightness is stored
in <filename>/var/lib/systemd/backlight/</filename>. During
loading, if udev property <option>ID_BACKLIGHT_CLAMP</option> is
not set to false value, the brightness is clamped to a value of at
loading, if the udev property <option>ID_BACKLIGHT_CLAMP</option> is
not set to false, the brightness is clamped to a value of at
least 1 or 5% of maximum brightness, whichever is greater. This
restriction will be removed when the kernel allows user space to
reliably set a brightness value which does not turn off the

4
man/systemd-cgtop.xml
View File

@ -203,7 +203,7 @@
<listitem><para>Controls whether the number of processes shown
for a control group shall include all processes that are
contained in any of the child control groups as well. Takes a
boolean argument, defaults to <literal>yes</literal>. If
boolean argument, which defaults to <literal>yes</literal>. If
enabled, the processes in child control groups are included, if
disabled, only the processes in the control group itself are
counted. This setting may also be toggled at runtime by
@ -343,7 +343,7 @@
excluding processes in child control groups in control group
process counts. This setting may also be controlled using the
<option>--recursive=</option> command line switch. This key is
not available of all tasks are counted, it is only available
not available if all tasks are counted, it is only available
if processes are counted, as enabled with the
<keycap>P</keycap> or <keycap>k</keycap>
keys.</para></listitem>

6
man/systemd-escape.xml
View File

@ -69,9 +69,9 @@
<para>By default, this command will escape the strings passed,
unless <option>--unescape</option> is passed which results in the
inverse operation being applied. If <option>--mangle</option> a
special mode of escaping is applied instead, which assumes a
string to be already escaped but will escape everything that
inverse operation being applied. If <option>--mangle</option> is given, a
special mode of escaping is applied instead, which assumes the
string is already escaped but will escape everything that
appears obviously non-escaped.</para>
</refsect1>

8
man/systemd-firstboot.xml
View File

@ -80,8 +80,8 @@
<listitem><para>The root user's password</para></listitem>
</itemizedlist>
<para>Each of the fields may either be queried interactively from
the users, set non-interactively on the tool's command line, or be
<para>Each of the fields may either be queried interactively by
users, set non-interactively on the tool's command line, or be
copied from a host system that is used to set up the system
image.</para>
@ -166,9 +166,9 @@
<citerefentry project='die-net'><refentrytitle>shadow</refentrytitle><manvolnum>5</manvolnum></citerefentry>
file. This setting exists in two forms:
<option>--root-password=</option> accepts the password to set
directly on the command line,
directly on the command line, and
<option>--root-password-file=</option> reads it from a file.
Note that it is not recommended specifying passwords on the
Note that it is not recommended to specify passwords on the
command line, as other users might be able to see them simply
by invoking
<citerefentry project='die-net'><refentrytitle>ps</refentrytitle><manvolnum>1</manvolnum></citerefentry>.</para></listitem>

4
man/systemd-fsck@.service.xml
View File

@ -66,11 +66,11 @@
<filename>systemd-fsck@.service</filename> is used for all other
file systems and for the root file system in the initramfs.</para>
<para>Those services are started at boot if
<para>These services are started at boot if
<option>passno</option> in <filename>/etc/fstab</filename> for the
file system is set to a value greater than zero. The file system
check for root is performed before the other file systems. Other
file systems may be checked in parallel, except when they are one
file systems may be checked in parallel, except when they are on
the same rotating disk.</para>
<para><filename>systemd-fsck</filename> does not know any details

2
man/systemd-hwdb.xml
View File

@ -64,7 +64,7 @@
<term><option>-r</option></term>
<term><option>--root=<replaceable>PATH</replaceable></option></term>
<listitem>
<para>Alternative root path in the filesystem.</para>
<para>Alternate root path in the filesystem.</para>
</listitem>
</varlistentry>
</variablelist>

2
man/systemd-journald.service.xml
View File

@ -244,7 +244,7 @@ systemd-tmpfiles --create --prefix /var/log/journal</programlisting>
<listitem><para>Sockets and other paths that
<command>systemd-journald</command> will listen on that are
visible in the file system. In addition to those, journald can
visible in the file system. In addition to these, journald can
listen for audit events using netlink.</para></listitem>
</varlistentry>
</variablelist>

2
man/systemd-machine-id-commit.service.xml
View File

@ -42,7 +42,7 @@
<refnamediv>
<refname>systemd-machine-id-commit.service</refname>
<refpurpose>Commit a transient machine-id to disk</refpurpose>
<refpurpose>Commit a transient machine ID to disk</refpurpose>
</refnamediv>
<refsynopsisdiv>

2
man/systemd-machine-id-setup.xml
View File

@ -88,7 +88,7 @@
and is different for every booted instance of the
VM.</para></listitem>
<listitem><para>Similar, if run inside a Linux container
<listitem><para>Similarly, if run inside a Linux container
environment and a UUID is configured for the container, this is
used to initialize the machine ID. For details, see the
documentation of the <ulink

2
man/systemd-notify.xml
View File

@ -125,7 +125,7 @@
message is sent. This option is hence unrelated to the other
options. For details about the semantics of this option, see
<citerefentry><refentrytitle>sd_booted</refentrytitle><manvolnum>3</manvolnum></citerefentry>. An
alternative way to check for this state is to call
alternate way to check for this state is to call
<citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>
with the <command>is-system-running</command> command. It will
return <literal>offline</literal> if the system was not booted

14
man/systemd-nspawn.xml
View File

@ -344,7 +344,7 @@
must be shifted to the container UID base that is
used during container runtime.</para>
<para>It is recommended to assign as least 65536 UIDs to each
<para>It is recommended to assign at least 65536 UIDs to each
container, so that the usable UID range in the container
covers 16 bit. For best security, do not assign overlapping UID
ranges to multiple containers. It is hence a good idea to use
@ -458,7 +458,7 @@
which case <literal>tcp</literal> is assumed. The container
port number and its colon may be omitted, in which case the
same port as the host port is implied. This option is only
supported if private networking is used, such as
supported if private networking is used, such as with
<option>--network-veth</option> or
<option>--network-bridge=</option>.</para></listitem>
</varlistentry>
@ -693,7 +693,7 @@
<listitem><para>Controls whether the container is registered
with
<citerefentry><refentrytitle>systemd-machined</refentrytitle><manvolnum>8</manvolnum></citerefentry>.
Takes a boolean argument, defaults to <literal>yes</literal>.
Takes a boolean argument, which defaults to <literal>yes</literal>.
This option should be enabled when the container runs a full
Operating System (more specifically: an init system), and is
useful to ensure that the container is accessible via
@ -753,7 +753,7 @@
<listitem><para>Boots the container in volatile mode. When no
mode parameter is passed or when mode is specified as
<option>yes</option>, full volatile mode is enabled. This
means the root directory is mounted as mostly unpopulated
means the root directory is mounted as a mostly unpopulated
<literal>tmpfs</literal> instance, and
<filename>/usr</filename> from the OS tree is mounted into it,
read-only (the system thus starts up with read-only OS
@ -761,9 +761,9 @@
to the either are lost on shutdown). When the mode parameter
is specified as <option>state</option>, the OS tree is
mounted read-only, but <filename>/var</filename> is mounted as
<literal>tmpfs</literal> instance into it (the system thus
a <literal>tmpfs</literal> instance into it (the system thus
starts up with read-only OS resources and configuration, but
pristine state, any changes to the latter are lost on
pristine state, and any changes to the latter are lost on
shutdown). When the mode parameter is specified as
<option>no</option> (the default), the whole OS tree is made
available writable.</para>
@ -816,7 +816,7 @@
<para>If this option is set to <option>trusted</option>, the
file is searched, read and used the same way, but regardless
if found in <filename>/etc/systemd/nspawn/</filename>,
of being found in <filename>/etc/systemd/nspawn/</filename>,
<filename>/run/systemd/nspawn/</filename> or next to the image
file or container root directory, all settings will take
effect, however, command line arguments still take precedence

2
man/systemd-resolved.service.xml
View File

@ -75,7 +75,7 @@
<citerefentry><refentrytitle>systemd.network</refentrytitle><manvolnum>5</manvolnum></citerefentry>
for details. To improve compatibility,
<filename>/etc/resolv.conf</filename> is read in order to discover
configured system DNS servers, however only if it is not a symlink
configured system DNS servers, but only if it is not a symlink
to <filename>/run/systemd/resolve/resolv.conf</filename> (see above).</para>
<para><command>systemd-resolved</command> synthesizes DNS RRs for the following cases:</para>

2
man/systemd-run.xml
View File

@ -239,7 +239,7 @@
<term><option>--pty</option></term>
<term><option>-t</option></term>
<listitem><para>When invoking a command as service connects
<listitem><para>When invoking a command, the service connects
its standard input and output to the invoking tty via a
pseudo TTY device. This allows invoking binaries as services
that expect interactive user input, such as interactive

2
man/systemd-sysusers.xml
View File

@ -74,7 +74,7 @@
specified in
<citerefentry><refentrytitle>sysusers.d</refentrytitle><manvolnum>5</manvolnum></citerefentry>
are searched for a matching file. If the string
<filename>-</filename> is specified as filenames, entries from the
<filename>-</filename> is specified as filename, entries from the
standard input of the process are read.</para>
</refsect1>

4
man/systemd-sysv-generator.xml
View File

@ -63,7 +63,7 @@
<para><ulink url="http://refspecs.linuxbase.org/LSB_3.1.1/LSB-Core-generic/LSB-Core-generic/iniscrptact.html">LSB headers</ulink>
in SysV init scripts are interpreted, and the ordering specified
in the header is turned into dependencies between the generated
unit and other units. LSB facilities
unit and other units. The LSB facilities
<literal>$remote_fs</literal>, <literal>$network</literal>,
<literal>$named</literal>, <literal>$portmap</literal>,
<literal>$time</literal> are supported and will be turned into
@ -73,7 +73,7 @@
<para>SysV runlevels have corresponding systemd targets
(<filename>runlevel<replaceable>X</replaceable>.target</filename>).
Wrapper unit that is generated will be wanted by those targets
The wrapper unit that is generated will be wanted by those targets
which correspond to runlevels for which the script is
enabled.</para>

2
man/systemd-timesyncd.service.xml
View File

@ -85,7 +85,7 @@
<term><filename>/var/lib/systemd/clock</filename></term>
<listitem>
<para>This file contains the timestamp of last successful
<para>This file contains the timestamp of the last successful
synchronization.</para>
</listitem>
</varlistentry>

2
man/systemd-update-done.service.xml
View File

@ -58,7 +58,7 @@
service that is invoked as part of the first boot after the vendor
operating system resources in <filename>/usr</filename> have been
updated. This is useful to implement offline updates of
<filename>/usr</filename> which might requires updates to
<filename>/usr</filename> which might require updates to
<filename>/etc</filename> or <filename>/var</filename> on the
following boot.</para>

2
man/systemd.automount.xml
View File

@ -137,7 +137,7 @@
</varlistentry>
<varlistentry>
<term><varname>TimeoutIdleSec=</varname></term>
<listitem><para>Configures an idleness timeout. Once the mount has been
<listitem><para>Configures an idle timeout. Once the mount has been
idle for the specified time, systemd will attempt to unmount. Takes a
unit-less value in seconds, or a time span value such as "5min 20s".
Pass 0 to disable the timeout logic. The timeout is disabled by

6
man/systemd.exec.xml
View File

@ -493,7 +493,7 @@
</varlistentry>
<varlistentry>
<term><varname>SyslogLevel=</varname></term>
<listitem><para>Default syslog level to use when logging to
<listitem><para>The default syslog level to use when logging to
syslog or the kernel log buffer. One of
<option>emerg</option>,
<option>alert</option>,
@ -951,13 +951,13 @@
invoked process must implement a
<command>getty</command>-compatible utmp/wtmp logic. If
<literal>login</literal> is set, first an
<constant>INIT_PROCESS</constant> entry, followed by an
<constant>INIT_PROCESS</constant> entry, followed by a
<constant>LOGIN_PROCESS</constant> entry is generated. In
this case, the invoked process must implement a <citerefentry
project='die-net'><refentrytitle>login</refentrytitle><manvolnum>1</manvolnum></citerefentry>-compatible
utmp/wtmp logic. If <literal>user</literal> is set, first an
<constant>INIT_PROCESS</constant> entry, then a
<constant>LOGIN_PROCESS</constant> entry and finally an
<constant>LOGIN_PROCESS</constant> entry and finally a
<constant>USER_PROCESS</constant> entry is generated. In this
case, the invoked process may be any process that is suitable
to be run as session leader. Defaults to

8
man/systemd.generator.xml
View File

@ -87,7 +87,7 @@
dynamically into native unit files.</para>
<para>Generators are loaded from a set of paths determined during
compilation, listed above. System and user generators are loaded
compilation, as listed above. System and user generators are loaded
from directories with names ending in
<filename>system-generators/</filename> and
<filename>user-generators/</filename>, respectively. Generators
@ -169,14 +169,14 @@
or <command>systemd</command> itself (this means: no
<citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>!). They
can however rely on the most basic kernel functionality to
be available, including mounted <filename>/sys</filename>,
be available, including a mounted <filename>/sys</filename>,
<filename>/proc</filename>, <filename>/dev</filename>.
</para>
</listitem>
<listitem>
<para>
Units written by generators are removed when configuration
Units written by generators are removed when the configuration
is reloaded. That means the lifetime of the generated
units is closely bound to the reload cycles of
<command>systemd</command> itself.
@ -233,7 +233,7 @@
<para>
If you are careful, you can implement generators in shell
scripts. We do recommend C code however, since generators
delay are executed synchronously and hence delay the
are executed synchronously and hence delay the
entire boot if they are slow.
</para>
</listitem>

4
man/systemd.link.xml
View File

@ -70,7 +70,7 @@
name in <filename>/usr/lib</filename>. This can be used to
override a system-supplied link file with a local file if needed.
As a special case, an empty file (file size 0) or symlink with the
same name pointing to <filename>/dev/null</filename> disable the
same name pointing to <filename>/dev/null</filename> disables the
configuration file entirely (it is "masked").</para>
<para>The link file contains a <literal>[Match]</literal> section,
@ -217,7 +217,7 @@
generated which is guaranteed to be the same on every
boot for the given machine and the given device, but
which is otherwise random. This feature depends on ID_NET_NAME_*
properties existing for the link. On hardware where these
properties to exist for the link. On hardware where these
properties are not set, the generation of a persistent MAC address
will fail.</para>
</listitem>

14
man/systemd.mount.xml
View File

@ -180,7 +180,7 @@
<varlistentry>
<term><option>x-systemd.idle-timeout=</option></term>
<listitem><para>Configures the idleness timeout of the
<listitem><para>Configures the idle timeout of the
automount unit. See <varname>TimeoutIdleSec=</varname> in
<citerefentry><refentrytitle>systemd.automount</refentrytitle><manvolnum>5</manvolnum></citerefentry>
for details.</para></listitem>
@ -192,13 +192,13 @@
<listitem><para>Configure how long systemd should wait for a
device to show up before giving up on an entry from
<filename>/etc/fstab</filename>. Specify a time in seconds or
explicitly append a unit as <literal>s</literal>,
explicitly append a unit such as <literal>s</literal>,
<literal>min</literal>, <literal>h</literal>,
<literal>ms</literal>.</para>
<para>Note that this option can only be used in
<filename>/etc/fstab</filename>, and will be
ignored when part of <varname>Options=</varname>
ignored when part of the <varname>Options=</varname>
setting in a unit file.</para>
</listitem>
</varlistentry>
@ -212,7 +212,7 @@
<filename>local-fs.target</filename> or
<filename>remote-fs.target</filename>. This means that it will
not be mounted automatically during boot, unless it is pulled
in by some other unit. Option <option>auto</option> has the
in by some other unit. The <option>auto</option> option has the
opposite meaning and is the default.</para>
</listitem>
</varlistentry>
@ -325,11 +325,11 @@
<varlistentry>
<term><varname>SmackFileSystemRootLabel=</varname></term>
<listitem><para>Takes a string for the smack label.
<listitem><para>Takes a string for the SMACK label.
This option specifies the label to assign the root of the
file system if it lacks the Smack extended attribute.
file system if it lacks the SMACK extended attribute.
Note that this option will be ignored if kernel does not
support the Smack feature.
support the SMACK feature.
See <ulink
url="https://www.kernel.org/doc/Documentation/security/Smack.txt">Smack.txt</ulink>
for details. </para></listitem>

74
man/systemd.netdev.xml
View File

@ -82,7 +82,7 @@
override a system-supplied configuration file with a local file if
needed. As a special case, an empty file (file size 0) or symlink
with the same name pointing to <filename>/dev/null</filename>
disable the configuration file entirely (it is "masked").</para>
disables the configuration file entirely (it is "masked").</para>
</refsect1>
<refsect1>
@ -106,7 +106,7 @@
<entry>A bond device is an aggregation of all its slave devices. See <ulink url="https://www.kernel.org/doc/Documentation/networking/bonding.txt">Linux Ethernet Bonding Driver HOWTO</ulink> for details.Local configuration</entry></row>
<row><entry><varname>bridge</varname></entry>
<entry>A bridge device is a software switch, each of its slave devices and the bridge itself are ports of the switch.</entry></row>
<entry>A bridge device is a software switch, and each of its slave devices and the bridge itself are ports of the switch.</entry></row>
<row><entry><varname>dummy</varname></entry>
<entry>A dummy device drops all packets sent to it.</entry></row>
@ -148,7 +148,7 @@
<entry>A persistent Level 3 tunnel between a network device and a device node.</entry></row>
<row><entry><varname>veth</varname></entry>
<entry>An ethernet tunnel between a pair of network devices.</entry></row>
<entry>An Ethernet tunnel between a pair of network devices.</entry></row>
<row><entry><varname>vlan</varname></entry>
<entry>A VLAN is a stacked device which receives packets from its underlying device based on VLAN tagging. See <ulink url="http://www.ieee802.org/1/pages/802.1Q.html">IEEE 802.1Q</ulink> for details.</entry></row>
@ -282,13 +282,13 @@
<para>The <literal>[Bridge]</literal> section only applies for
netdevs of kind <literal>bridge</literal>, and accepts the
following key:</para>
following keys:</para>
<variablelist class='network-directives'>
<varlistentry>
<term><varname>HelloTimeSec=</varname></term>
<listitem>
<para>HelloTimeSec specifies the number of seconds a hello packet is
<para>HelloTimeSec specifies the number of seconds between two hello packets
sent out by the root bridge and the designated bridges. Hello packets are
used to communicate information about the topology throughout the entire
bridged local area network.</para>
@ -436,7 +436,7 @@
<varlistentry>
<term><varname>ARPProxy=</varname></term>
<listitem>
<para>A boolean. When true, enables ARP proxy.</para>
<para>A boolean. When true, enables ARP proxying.</para>
</listitem>
</varlistentry>
<varlistentry>
@ -449,14 +449,14 @@
<varlistentry>
<term><varname>L3MissNotification=</varname></term>
<listitem>
<para>A boolean. When true, enables netlink IP ADDR miss
<para>A boolean. When true, enables netlink IP address miss
notifications.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>RouteShortCircuit=</varname></term>
<listitem>
<para>A boolean. When true, route short circuit is turned
<para>A boolean. When true, route short circuiting is turned
on.</para>
</listitem>
</varlistentry>
@ -549,14 +549,14 @@
<varlistentry>
<term><varname>IPv6FlowLabel=</varname></term>
<listitem>
<para>Configures The 20-bit Flow Label (see <ulink url="https://tools.ietf.org/html/rfc6437">
<para>Configures the 20-bit flow label (see <ulink url="https://tools.ietf.org/html/rfc6437">
RFC 6437</ulink>) field in the IPv6 header (see <ulink url="https://tools.ietf.org/html/rfc2460">
RFC 2460</ulink>), is used by a node to label packets of a flow.
It's only used for IPv6 Tunnels.
A Flow Label of zero is used to indicate packets that have
not been labeled. Takes following values.
When <literal>inherit</literal> it uses the original flowlabel,
or can be configured to any value between 0 to 0xFFFFF.</para>
RFC 2460</ulink>), which is used by a node to label packets of a flow.
It is only used for IPv6 tunnels.
A flow label of zero is used to indicate packets that have
not been labeled.
It can be configured to a value in the range 0–0xFFFFF, or be
set to <literal>inherit</literal>, in which case the original flowlabel is used.</para>
</listitem>
</varlistentry>
<varlistentry>
@ -587,7 +587,7 @@
<varlistentry>
<term><varname>Mode=</varname></term>
<listitem>
<para>An <literal>ip6tnl</literal> tunnels can have three
<para>An <literal>ip6tnl</literal> tunnel can be in one of three
modes
<literal>ip6ip6</literal> for IPv6 over IPv6,
<literal>ipip6</literal> for IPv4 over IPv6 or
@ -602,7 +602,7 @@
<para>The <literal>[Peer]</literal> section only applies for
netdevs of kind <literal>veth</literal> and accepts the
following key:</para>
following keys:</para>
<variablelist class='network-directives'>
<varlistentry>
@ -777,9 +777,9 @@
<term><varname>LearnPacketIntervalSec=</varname></term>
<listitem>
<para>Specifies the number of seconds between instances where the bonding
driver sends learning packets to each slaves peer switch.
The valid range is 1–0x7fffffff; the default value is 1. This Option
has effect only in balance-tlb and balance-alb modes.</para>
driver sends learning packets to each slave peer switch.
The valid range is 1–0x7fffffff; the default value is 1. This option
has an effect only for the balance-tlb and balance-alb modes.</para>
</listitem>
</varlistentry>
@ -788,8 +788,8 @@
<listitem>
<para>Specifies the 802.3ad aggregation selection logic to use. Possible values are
<literal>stable</literal>,
<literal>bandwidth</literal>,
<literal>count</literal>
<literal>bandwidth</literal> and
<literal>count</literal>.
</para>
</listitem>
</varlistentry>
@ -797,13 +797,13 @@
<varlistentry>
<term><varname>FailOverMACPolicy=</varname></term>
<listitem>
<para>Specifies whether active-backup mode should set all slaves to
the same MAC address at enslavement or, when enabled, perform special handling of the
<para>Specifies whether the active-backup mode should set all slaves to
the same MAC address at the time of enslavement or, when enabled, to perform special handling of the
bond's MAC address in accordance with the selected policy. The default policy is none.
Possible values are
<literal>none</literal>,
<literal>active</literal>,
<literal>follow</literal>
<literal>active</literal> and
<literal>follow</literal>.
</para>
</listitem>
</varlistentry>
@ -817,8 +817,8 @@
monitoring purposes. Possible values are
<literal>none</literal>,
<literal>active</literal>,
<literal>backup</literal>,
<literal>all</literal>
<literal>backup</literal> and
<literal>all</literal>.
</para>
</listitem>
</varlistentry>
@ -838,7 +838,7 @@
<para>Specifies the IP addresses to use as ARP monitoring peers when
ARPIntervalSec is greater than 0. These are the targets of the ARP request
sent to determine the health of the link to the targets.
Specify these values in ipv4 dotted decimal format. At least one IP
Specify these values in IPv4 dotted decimal format. At least one IP
address must be given for ARP monitoring to function. The
maximum number of targets that can be specified is 16. The
default value is no IP addresses.
@ -853,8 +853,8 @@
in order for the ARP monitor to consider a slave as being up.
This option affects only active-backup mode for slaves with
ARPValidate enabled. Possible values are
<literal>any</literal>,
<literal>all</literal>
<literal>any</literal> and
<literal>all</literal>.
</para>
</listitem>
</varlistentry>
@ -868,8 +868,8 @@
occurs. This option is designed to prevent flip-flopping between
the primary slave and other slaves. Possible values are
<literal>always</literal>,
<literal>better</literal>,
<literal>failure</literal>
<literal>better</literal> and
<literal>failure</literal>.
</para>
</listitem>
</varlistentry>
@ -893,7 +893,7 @@
<para>Specify the number of packets to transmit through a slave before
moving to the next one. When set to 0, then a slave is chosen at
random. The valid range is 0–65535. Defaults to 1. This option
has effect only in balance-rr mode.
only has effect when in balance-rr mode.
</para>
</listitem>
</varlistentry>
@ -907,7 +907,7 @@
a peer notification is sent on the bonding device and each
VLAN sub-device. This is repeated at each link monitor interval
(ARPIntervalSec or MIIMonitorSec, whichever is active) if the number is
greater than 1. The valid range is 0–255. Default value is 1.
greater than 1. The valid range is 0–255. The default value is 1.
These options affect only the active-backup mode.
</para>
</listitem>
@ -916,8 +916,8 @@
<varlistentry>
<term><varname>AllSlavesActive=</varname></term>
<listitem>
<para> A boolean. Specifies that duplicate frames (received on inactive ports)
should be dropped false or delivered true. Normally, bonding will drop
<para>A boolean. Specifies that duplicate frames (received on inactive ports)
should be dropped when false, or delivered when true. Normally, bonding will drop
duplicate frames (received on inactive ports), which is desirable for
most users. But there are some times it is nice to allow duplicate
frames to be delivered. The default value is false (drop duplicate frames

24
man/systemd.network.xml
View File

@ -78,7 +78,7 @@
override a system-supplied configuration file with a local file if
needed. As a special case, an empty file (file size 0) or symlink
with the same name pointing to <filename>/dev/null</filename>
disable the configuration file entirely (it is "masked").</para>
disables the configuration file entirely (it is "masked").</para>
</refsect1>
<refsect1>
@ -263,7 +263,7 @@
<term><varname>IPv6Token=</varname></term>
<listitem>
<para>An IPv6 address with the top 64 bits unset. When set, indicates the
64 bits interface part of SLAAC IPv6 addresses for this link. By default,
64-bit interface part of SLAAC IPv6 addresses for this link. By default,
it is autogenerated.</para>
</listitem>
</varlistentry>
@ -409,7 +409,7 @@
</varlistentry>
<varlistentry>
<term><varname>IPv6AcceptRouterAdvertisements=</varname></term>
<listitem><para>Force the setting of <filename>accept_ra</filename>
<listitem><para>Force the setting of the <filename>accept_ra</filename>
(router advertisements) setting for the interface.
When unset, the kernel default is used, and router
advertisements are accepted only when local forwarding
@ -427,8 +427,8 @@
</varlistentry>
<varlistentry>
<term><varname>IPv6DuplicateAddressDetection=</varname></term>
<listitem><para>Configures amount of IPv6 Duplicate
Address Detection probes to se(DAD). Defaults to unset.
<listitem><para>Configures the amount of IPv6 Duplicate
Address Detection (DAD) probes to send. Defaults to unset.
</para></listitem>
</varlistentry>
<varlistentry>
@ -556,7 +556,7 @@
<varlistentry>
<term><varname>Scope=</varname></term>
<listitem>
<para>The scope of the route. One of the values <literal>global</literal>,
<para>The scope of the route, which can be <literal>global</literal>,
<literal>link</literal> or <literal>host</literal>. Defaults to
<literal>global</literal>.</para>
</listitem>
@ -648,7 +648,7 @@
<listitem>
<para>When true (the default), the static routes will be
requested from the DHCP server and added to the routing
table with metric of 1024.</para>
table with a metric of 1024.</para>
</listitem>
</varlistentry>
@ -770,7 +770,7 @@
into account that acquire DNS or NTP server information at a
later point. DNS server propagation does not take
<filename>/etc/resolv.conf</filename> into account. Also, note
that the leases are not refreshed if uplink network
that the leases are not refreshed if the uplink network
configuration changes. To ensure clients regularly acquire the
most current uplink DNS server information, it is thus
advisable to shorten the DHCP lease time via
@ -844,7 +844,7 @@
<term><varname>FastLeave=</varname></term>
<listitem>
<para>A boolean. This flag allows the bridge to immediately stop multicast
traffic on a port that receives IGMP Leave message. It is only used with
traffic on a port that receives an IGMP Leave message. It is only used with
IGMP snooping if enabled on the bridge. Defaults to off.</para>
</listitem>
</varlistentry>
@ -860,7 +860,7 @@
<term><varname>Cost=</varname></term>
<listitem>
<para>Sets the "cost" of sending packets of this interface.
Each port in a bridge may have different speed and the cost
Each port in a bridge may have a different speed and the cost
is used to decide which link to use. Faster interfaces
should have lower costs.</para>
</listitem>
@ -885,8 +885,8 @@
<varlistentry>
<term><varname>VLANId=</varname></term>
<listitem>
<para>The VLAN Id for the new static MAC table entry. If
omitted, no VLAN Id info is appended to the new static MAC
<para>The VLAN ID for the new static MAC table entry. If
omitted, no VLAN ID info is appended to the new static MAC
table entry.</para>
</listitem>
</varlistentry>

14
man/systemd.nspawn.xml
View File

@ -73,7 +73,7 @@
to specific containers. The syntax of these files is inspired by
<filename>.desktop</filename> files following the <ulink
url="http://standards.freedesktop.org/desktop-entry-spec/latest/">XDG
Desktop Entry Specification</ulink>, which are in turn inspired by
Desktop Entry Specification</ulink>, which in turn are inspired by
Microsoft Windows <filename>.ini</filename> files.</para>
<para>Boolean arguments used in these settings files can be
@ -112,7 +112,7 @@
host (such as files or directories) are ignored. To which options
this applies is documented below.</para>
<para>Persistent settings file created and maintained by the
<para>Persistent settings files created and maintained by the
administrator (and thus trusted) should be placed in
<filename>/etc/systemd/nspawn/</filename>, while automatically
downloaded (and thus potentially untrusted) settings files are
@ -122,7 +122,7 @@
files acquired from the image vendor, it is recommended to copy the
settings files into <filename>/etc/systemd/nspawn/</filename> and
edit them there, so that the privileged options become
available. The precise algorithm how the files are searched and
available. The precise algorithm for how the files are searched and
interpreted may be configured with
<command>systemd-nspawn</command>'s <option>--settings=</option>
switch, see
@ -141,7 +141,7 @@
<varlistentry>
<term><varname>Boot=</varname></term>
<listitem><para>Takes a boolean argument, defaults to off. If
<listitem><para>Takes a boolean argument, which defaults to off. If
enabled, <command>systemd-nspawn</command> will automatically
search for an <filename>init</filename> executable and invoke
it. In this case, the specified parameters using
@ -240,7 +240,7 @@
<varlistentry>
<term><varname>ReadOnly=</varname></term>
<listitem><para>Takes a boolean argument, defaults to off. If
<listitem><para>Takes a boolean argument, which defaults to off. If
specified, the container will be run with a read-only file
system. This setting corresponds to the
<option>--read-only</option> command line
@ -303,7 +303,7 @@
<varlistentry>
<term><varname>Private=</varname></term>
<listitem><para>Takes a boolean argument, defaults to off. If
<listitem><para>Takes a boolean argument, which defaults to off. If
enabled, the container will run in its own network namespace
and not share network interfaces and configuration with the
host. This setting corresponds to the
@ -315,7 +315,7 @@
<term><varname>VirtualEthernet=</varname></term>
<listitem><para>Takes a boolean argument. Configures whether
to create a virtual ethernet connection
to create a virtual Ethernet connection
(<literal>veth</literal>) between host and the container. This
setting implies <varname>Private=yes</varname>. This setting
corresponds to the <option>--network-veth</option> command

12
man/systemd.service.xml
View File

@ -283,7 +283,7 @@
<term><varname>ExecStart=</varname></term>
<listitem><para>Commands with their arguments that are
executed when this service is started. The value is split into
zero or more command lines is according to the rules described
zero or more command lines according to the rules described
below (see section "Command Lines" below).
</para>
@ -343,7 +343,7 @@
<para><varname>ExecStartPost=</varname> commands are only run after
the service has started, as determined by <varname>Type=</varname>
(i.e. The process has been started for <varname>Type=simple</varname>
(i.e. the process has been started for <varname>Type=simple</varname>
or <varname>Type=idle</varname>, the process exits successfully for
<varname>Type=oneshot</varname>, the initial process exits successfully
for <varname>Type=forking</varname>, <literal>READY=1</literal> is sent
@ -859,7 +859,7 @@
<option>reboot-immediate</option> causes immediate execution
of the
<citerefentry><refentrytitle>reboot</refentrytitle><manvolnum>2</manvolnum></citerefentry>
system call, which might result in data loss. Similar,
system call, which might result in data loss. Similarly,
<option>poweroff</option>, <option>poweroff-force</option>,
<option>poweroff-immediate</option> have the effect of
powering down the system with similar semantics. Defaults to
@ -909,9 +909,9 @@
<ulink
url="https://www.kernel.org/doc/Documentation/usb/functionfs.txt">USB
FunctionFS</ulink> descriptors, for implementation of USB
gadget functions. This is is used only in conjunction with a
gadget functions. This is used only in conjunction with a
socket unit with <varname>ListenUSBFunction=</varname>
configured. The contents of this file is written to the
configured. The contents of this file are written to the
<filename>ep0</filename> file after it is
opened.</para></listitem>
</varlistentry>
@ -1216,7 +1216,7 @@ WantedBy=multi-user.target</programlisting>
then execute another to shut it down, but no process remains
active while they are considered "started". Network
configuration can sometimes fall into this category. Another use
case is if a oneshot service shall not be executed a each time
case is if a oneshot service shall not be executed each time
when they are pulled in as a dependency, but only the first
time.</para>

12
man/systemd.socket.xml
View File

@ -268,7 +268,7 @@
implementation of USB gadget functions. This expects an
absolute file system path as the argument. Behavior otherwise
is very similar to the <varname>ListenFIFO=</varname>
directive above. Use this to open FunctionFS endpoint
directive above. Use this to open the FunctionFS endpoint
<filename>ep0</filename>. When using this option, the
activated service has to have the
<varname>USBFunctionDescriptors=</varname> and
@ -376,7 +376,7 @@
activation.</para>
<para>For IPv4 and IPv6 connections, the <varname>REMOTE_ADDR</varname>
environment variable will contain the remote IP, and <varname>REMOTE_PORT</varname>
environment variable will contain the remote IP address, and <varname>REMOTE_PORT</varname>
will contain the remote port. This is the same as the format used by CGI.
For SOCK_RAW, the port is the IP protocol.</para></listitem>
</varlistentry>
@ -432,7 +432,7 @@
<term><varname>KeepAliveIntervalSec=</varname></term>
<listitem><para>Takes time (in seconds) as argument between
individual keepalive probes, if the socket option SO_KEEPALIVE
has been set on this socket seconds as argument. This controls
has been set on this socket. This controls
the TCP_KEEPINTVL socket option (see
<citerefentry project='man-pages'><refentrytitle>socket</refentrytitle><manvolnum>7</manvolnum></citerefentry>
and the <ulink
@ -443,7 +443,7 @@
<varlistentry>
<term><varname>KeepAliveProbes=</varname></term>
<listitem><para>Takes integer as argument. It's the number of
<listitem><para>Takes an integer as argument. It's the number of
unacknowledged probes to send before considering the
connection dead and notifying the application layer. This
controls the TCP_KEEPCNT socket option (see
@ -752,12 +752,12 @@
<term><varname>FileDescriptorName=</varname></term>
<listitem><para>Assigns a name to all file descriptors this
socket unit encapsulates. This is useful to help activated
services to identify specific file descriptors, if multiple
services identify specific file descriptors, if multiple fds
are passed. Services may use the
<citerefentry><refentrytitle>sd_listen_fds_with_names</refentrytitle><manvolnum>3</manvolnum></citerefentry>
call to acquire the names configured for the received file
descriptors. Names may contain any ASCII character, but must
exclude control characters or <literal>:</literal>, and must
exclude control characters and <literal>:</literal>, and must
be at most 255 characters in length. If this setting is not
used, the file descriptor name defaults to the name of the
socket unit, including its <filename>.socket</filename>

6
man/systemd.swap.xml
View File

@ -124,7 +124,7 @@
will not be added as a dependency for
<filename>swap.target</filename>. This means that it will not
be activated automatically during boot, unless it is pulled in
by some other unit. Option <option>auto</option> has the
by some other unit. The <option>auto</option> option has the
opposite meaning and is the default.</para>
</listitem>
</varlistentry>
@ -177,8 +177,8 @@
<listitem><para>Swap priority to use when activating the swap
device or file. This takes an integer. This setting is
optional and ignored when priority is set by <option>pri=</option> in the
<varname>Options=</varname> option.</para></listitem>
optional and ignored when the priority is set by <option>pri=</option> in the
<varname>Options=</varname> key.</para></listitem>
</varlistentry>
<varlistentry>

2
man/systemd.time.xml
View File

@ -139,7 +139,7 @@
placeholders instead of timestamps: <literal>now</literal> may be
used to refer to the current time (or of the invocation of the
command that is currently executed). <literal>today</literal>,
<literal>yesterday</literal>, <literal>tomorrow</literal> refer to
<literal>yesterday</literal>, and <literal>tomorrow</literal> refer to
00:00:00 of the current day, the day before, or the next day,
respectively.</para>

4
man/systemd.unit.xml
View File

@ -363,7 +363,7 @@
<refsect1>
<title>[Unit] Section Options</title>
<para>Unit file may include a [Unit] section, which carries
<para>The unit file may include a [Unit] section, which carries
generic information about the unit that is not dependent on the
type of unit:</para>
@ -1025,7 +1025,7 @@
<listitem><para>Similar to the
<varname>ConditionArchitecture=</varname>,
<varname>ConditionVirtualization=</varname>, ... condition
<varname>ConditionVirtualization=</varname>, etc., condition
settings described above, these settings add assertion checks
to the start-up of the unit. However, unlike the conditions
settings, any assertion setting that is not met results in

2
man/systemd.xml
View File

@ -562,7 +562,7 @@
<filename>ctrl-alt-del.target</filename> unit. This is mostly
equivalent to <command>systemctl start
ctl-alt-del.target</command>. If this signal is received more
often than 7 times per 2s, an immediate reboot is triggered.
than 7 times per 2s, an immediate reboot is triggered.
Note that pressing Ctrl-Alt-Del on the console will trigger
this signal. Hence, if a reboot is hanging, pressing
Ctrl-Alt-Del more than 7 times in 2s is a relatively safe way

2
man/sysusers.d.xml
View File

@ -207,7 +207,7 @@ u root 0 "Superuser" /root</programlisting>
<para>Note that <command>systemd-sysusers</command> will do
nothing if the specified users or groups already exist, so
normally, there no reason to override
normally, there is no reason to override
<filename>sysusers.d</filename> vendor configuration, except to
block certain users or groups from being created.</para>
</refsect1>

26
man/tmpfiles.d.xml
View File

@ -387,7 +387,7 @@
<varname>+</varname> (the default one) causes the
attribute(s) to be added; <varname>-</varname> causes the
attribute(s) to be removed; <varname>=</varname> causes the
attributes to set exactly as the following letters. The
attributes to be set exactly as the following letters. The
letters <literal>aAcCdDeijsStTu</literal> select the new
attributes for the files, see
<citerefentry project='man-pages'><refentrytitle>chattr</refentrytitle>
@ -414,7 +414,7 @@
<term><varname>a</varname></term>
<term><varname>a+</varname></term>
<listitem><para>Set POSIX ACLs (access control lists). If
suffixed with <varname>+</varname>, specified entries will
suffixed with <varname>+</varname>, the specified entries will
be added to the existing set.
<command>systemd-tmpfiles</command> will automatically add
the required base entries for user and group based on the
@ -537,7 +537,7 @@
<para>The user and group to use for this file or directory. This
may either be a numeric user/group ID or a user or group
name. If omitted or when set to <literal>-</literal>, the
default 0 (root) is used. For <varname>z</varname>,
default 0 (root) is used. For <varname>z</varname> and
<varname>Z</varname> lines, when omitted or when set to
<literal>-</literal>, the file ownership will not be
modified. These parameters are ignored for <varname>x</varname>,
@ -552,16 +552,16 @@
delete when cleaning. If a file or directory is older than the
current time minus the age field, it is deleted. The field
format is a series of integers each followed by one of the
following postfixes for the respective time units:
following suffixes for the respective time units:
<constant>s</constant>,
<constant>m</constant> or <constant>min</constant>,
<constant>h</constant>,
<constant>d</constant>,
<constant>w</constant>,
<constant>ms</constant>,
<constant>ms</constant>, and
<constant>us</constant>,
respectively meaning seconds, minutes, hours, days, weeks,
milliseconds, and microseconds. Full names of the time units can
meaning seconds, minutes, hours, days, weeks,
milliseconds, and microseconds, respectively. Full names of the time units can
be used too.
</para>
@ -590,18 +590,18 @@
<title>Argument</title>
<para>For <varname>L</varname> lines determines the destination
path of the symlink. For <varname>c</varname>,
<varname>b</varname> determines the major/minor of the device
path of the symlink. For <varname>c</varname> and
<varname>b</varname>, determines the major/minor of the device
node, with major and minor formatted as integers, separated by
<literal>:</literal>, e.g. <literal>1:3</literal>. For
<varname>f</varname>, <varname>F</varname>, and
<varname>w</varname> may be used to specify a short string that
<varname>w</varname>, the argument may be used to specify a short string that
is written to the file, suffixed by a newline. For
<varname>C</varname>, specifies the source file or
directory. For <varname>t</varname>, <varname>T</varname>,
directory. For <varname>t</varname> and <varname>T</varname>,
determines extended attributes to be set. For
<varname>a</varname>, <varname>A</varname>, determines ACL
attributes to be set. For <varname>h</varname>,
<varname>a</varname> and <varname>A</varname>, determines ACL
attributes to be set. For <varname>h</varname> and
<varname>H</varname>, determines the file attributes to
set. Ignored for all other lines.</para>
</refsect2>

2
man/udev_device_get_syspath.xml
View File

@ -181,7 +181,7 @@
<function>udev_device_get_parent_with_subsystem_devtype()</function>
return a pointer to the parent device. No additional reference
to this device is acquired, but the child device owns a reference
to such parent device. On failure, <constant>NULL</constant>
to such a parent device. On failure, <constant>NULL</constant>
is returned.</para>
<para>On success, <function>udev_device_get_is_initialized()</function>

2
man/udev_device_new_from_syspath.xml
View File

@ -141,7 +141,7 @@
and
<citerefentry><refentrytitle>udev_device_get_sysname</refentrytitle><manvolnum>3</manvolnum></citerefentry>)
and <function>udev_device_new_from_device_id</function> looks up devices based on the provided
device id, which is a special string in one of the following four forms:
device ID, which is a special string in one of the following four forms:
<table>
<title>Device ID strings</title>

2
man/udev_enumerate_scan_devices.xml
View File

@ -112,7 +112,7 @@
<constant>NULL</constant> is returned.</para>
<para><function>udev_enumerate_get_udev()</function> always
returns a pointer to the udev context that this enumerate
returns a pointer to the udev context that this enumerated
object is associated with.</para>
</refsect1>

2
man/udevadm.xml
View File

@ -317,7 +317,7 @@
<term><option>--name-match=<replaceable>NAME</replaceable></option></term>
<listitem>
<para>Trigger events for devices with a matching
device path. This options can be specified multiple
device path. This option can be specified multiple
times.</para>
</listitem>
</varlistentry>

2
src/libsystemd-network/lldp-tlv.c
View File

@ -278,7 +278,7 @@ int tlv_packet_parse_pdu(tlv_packet *m, uint16_t size) {
p = m->pdu;
/* extract ethernet header */
/* extract Ethernet header */
memcpy(&m->mac, p, ETH_ALEN);
p += sizeof(struct ether_header);

2
src/libsystemd-network/sd-dhcp-client.c
View File

@ -1517,7 +1517,7 @@ static int client_receive_message_udp(sd_event_source *s, int fd,
expected_hlen = ETH_ALEN;
expected_chaddr = (const struct ether_addr *) &client->mac_addr;
} else {
/* Non-ethernet links expect zero chaddr */
/* Non-Ethernet links expect zero chaddr */
expected_hlen = 0;
expected_chaddr = &zero_mac;
}

2
src/libsystemd-network/test-lldp.c
View File

@ -54,7 +54,7 @@ static int lldp_build_tlv_packet(tlv_packet **ret) {
.ether_type = htons(ETHERTYPE_LLDP),
};
/* Append ethernet header */
/* Append Ethernet header */
memcpy(&ether.ether_dhost, lldp_dst, ETHER_ADDR_LEN);
memcpy(&ether.ether_shost, &mac_addr, ETHER_ADDR_LEN);

4
src/nspawn/nspawn.c
View File

@ -209,10 +209,10 @@ static void help(void) {
" --network-ipvlan=INTERFACE\n"
" Create a ipvlan network interface based on an\n"
" existing network interface to the container\n"
" -n --network-veth Add a virtual ethernet connection between host\n"
" -n --network-veth Add a virtual Ethernet connection between host\n"
" and container\n"
" --network-bridge=INTERFACE\n"
" Add a virtual ethernet connection between host\n"
" Add a virtual Ethernet connection between host\n"
" and container and add it to an existing bridge on\n"
" the host\n"
" -p --port=[PROTOCOL:]HOSTPORT[:CONTAINERPORT]\n"

2
src/shared/machine-pool.c
View File

@ -378,7 +378,7 @@ int grow_machine_directory(void) {
if (b.f_bavail > b.f_blocks / 3)
return 0;
/* Calculate how much we are willing to add at maximum */
/* Calculate how much we are willing to add at most */
max_add = ((uint64_t) a.f_bavail * (uint64_t) a.f_bsize) - VAR_LIB_MACHINES_FREE_MIN;
/* Calculate the old size */

8
src/udev/udev-builtin-net_id.c
View File

@ -27,7 +27,7 @@
* http://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
*
* Two character prefixes based on the type of interface:
* en -- ethernet
* en -- Ethernet
* sl -- serial line IP (slip)
* wl -- wlan
* ww -- wwan
@ -53,17 +53,17 @@
* exported.
* The usual USB configuration == 1 and interface == 0 values are suppressed.
*
* PCI ethernet card with firmware index "1":
* PCI Ethernet card with firmware index "1":
* ID_NET_NAME_ONBOARD=eno1
* ID_NET_NAME_ONBOARD_LABEL=Ethernet Port 1
*
* PCI ethernet card in hotplug slot with firmware index number:
* PCI Ethernet card in hotplug slot with firmware index number:
* /sys/devices/pci0000:00/0000:00:1c.3/0000:05:00.0/net/ens1
* ID_NET_NAME_MAC=enx000000000466
* ID_NET_NAME_PATH=enp5s0
* ID_NET_NAME_SLOT=ens1
*
* PCI ethernet multi-function card with 2 ports:
* PCI Ethernet multi-function card with 2 ports:
* /sys/devices/pci0000:00/0000:00:1c.0/0000:02:00.0/net/enp2s0f0
* ID_NET_NAME_MAC=enx78e7d1ea46da
* ID_NET_NAME_PATH=enp2s0f0